Artifacts created after rendering

Hi,
I'm using Premiere Pro CS3 to edit my animation movie.
When I was using my old computer everything worked just fine, but when I copied the project to my new computer I noticed that after rendering, some artifacts were created in some of the shots (the artifacts do not appear in the original files just after rendering).
I installed premiere again but that didn't help, also my graphic card driver is the most updated.
Anyone know what can be the problem?
Thanks.

That helped some but I still think I have some setting not right? I just upgraded to 6.0 and a new computer and just started having this porblem. I'm running an oracle with a ton of ram somewhere around 60 and really good graphics card I'm really surprised that I need to wait for a minute or 2 for the yellow render screen to go away and show my video again? Not sure just kinda quarky I think

Similar Messages

Video "Hits" After Rendering

After I render a piece of my timeline and look at it on our studio monitor, I'm getting a good amount of what I would call "hits" in the video, like hits you would see on an old tape that's past its prime. The timeline has a number of graphics layered on top of one another with text and moving jpegs, with a broadcast safe filter on everything.
I've had weird things appear after rendering before, but they've always gone away after rerendering. This time they're pretty consistently in the same spots.
Any ideas about settings I should look into or other work arounds?

I have seen this on several occasions and there seem to be a few causes.
possibilities:
1) you are using the Broadcast safe filter, if the clipping on your images are extreme you get strange green and white artifacts after rendering. Try using the 3-way color corrector to bring levels down before applying the BS filter. Or if the artifacts are occurring on graphics, make adjustments in Photoshop (or whatever program you created the graphics in) and bring them back into FCP. A lot of people create graphics using the full range of RGB colors and luminance values. NTSC video does not have as large of a chroma and luma range as RGB.
2) You are working in an uncompressed 10-bit sequence and applying filters that are not compatible (for lack of a better word) with Apple's 10-bit codec. (Or you are just getting random render problems in 10-bit). I have had many, many render issues in 10-bit that went away by switching to 8-bit. In most cases you can't really see much difference between 8 and 10 bit video anyway, so why go through the hassle or working with it. If you are doing a lot of green screen work, you may want to reevaluate this argument.
I'm sure there are other possible causes for the problems you're experiencing, but these are the ones I've run into in the past.
Graeme Nattress knows a lot about 10-bit issues in FCP, perhaps he can chime in with some suggestions/explanations.

Sound problems after rendering

Hi,
Being that I have Premiere Pro 7.0, I am not too sure how much help I will get, but i was hoping that someone here could still help if all possible. Here is my problem. I thought I start practicing developing video lessons for 3d software. These lessons would be created using a screen captureing program, called camStudio. In my first lesson, my first try doing the entire lesson as one video, I found out that the video file size exceeded CamStudio's exporter file size allowance when trying to save out to Microsoft DV 1 AVI file. I then decided to split the lesson into 2, but final compose it as one video in Premiere Pro 7.0. Since the lesson was broken up into 2 screen captured videos, I thought it would make things easier if each screen captured video was in its own simulation. So, in other words, I have created 2 simulations in one project, and then I had nested both of them into the 3rd simulation. For example, simulation 1 was called lesson1 part a, and simulation 2 was named lesson1 part b, and the third simulation was called lesson1. Once I had everything setup, at first everything was working fine, meaing I could see the video and hear the sound tracks. However, after I choose to render the sequence using Microsoft DV11 AVI, I do not get any sound, and yet I made sure that the exporter exports both the video and audio. Furthermore, after rendering the project, going back to Premiere Pro's project, and pressing play, I get the error.... Disk Write Error: Verify drive connection, available disk space and disk access privileges
However, when I go inside simulation 1 or simulation 2, I still hear their sound tracks. One other thing I have noticed is that I get the sound back in the project if I move the orginal simulations into a new simulation. By doing that, I am then able to recover the project,. but if I choose to render again, the same process happens all over again.
Does anyone Have any ideas?
My Specs
Adobe Premiere Pro 7.0
Windows XP SP3
CPU 3.0GHz processor
RAM 512MB

so are you saying that the problem could be comming from how I did my recording with CamStudio? Not to change the subject, but you see, I am kind of lost. My goal is to provide some free video lessons. I was thinking my final encoded videos will be in DivX or XVid. CamStudio does offer users to compress to thise types of format. Howeveer, due to owning a very cheap microphone, those kinds that sit on your desktop, is causing me to have the biggest problem, since there is a good amount of background hissing noise in my recordings. So, I have been using both CamStudio for the screen capturing and Audacity to do the voice recording. Then in Audacity, I try my best of tuning up the voice and removing the background hissing noise. Once that is finished, I then need some sort of video editing software that allows me to put the video and my voice recodring together as well as splicing areas of the lesson where I stutter or slurr my speach a bit, which can be easily fixed in Adobe Premire Pro. However, my version of Premiere does not offer XVid or DivX encoding. I was thinking of using VirtualDub, but I really do not want to have 5 programs, just so that I can fix all of my problems, not to mention I have no $$$$ left. So is there a free better way?

Red rendering line in timeline turns green after rendering but then reappears.

I''m a new user of Premiere Elements 10 and relatively new to video editing. My system info is: 2010 Mac Pro quadcore 2.66 Ghz with 12 Gigs of memory, NVIDIA GeForce GT120 512Mb running Lion 10.7.3. The red rendering line in my project turns green, as expected, after rendering but then reappears red after I close the project and reopen it. The project is saved regularly after rendering and everything works normally. No changes are made to any clips and as I stated the render line is green when the project is saved and closed. Any ideas what I might be doing wrong. Thanks in advance.

Thank you for that information. It kills about all of my theories.
Something is keeping PrE from seeing the links that it created to the Render Files, so PrE cannot find them - the link is dead.
I know so very little about Mac's, that I cannot even imagine where to begin. Maybe a Mac-user will drop by, and have an idea, and then we both will learn something.
Wish that I had more to offer, but good luck,
Hunt

"Black screen" after "rendering"

After rendering a 3-tracks of the timeline (without effects), when i play the project into sequence, I see black screen. The files are created correctly, but are not "called" automatically on the timeline. Help me! Thank you. Luca

Please provide
these details to help us help you.
Cheers
Eddie
PremiereProPedia
RSS feed)
- Over 350 frequently answered questions
- Over 300 free tutorials
- Maintained by editors like
you
Forum FAQ

After Effects change size of the Movie after rendering mp4

Hi,
I created a new composition and wanted to render it as an mp4 file. The composition has a size of 1500px x 1000px, after rendering, the mp4 file has a size of 750px x 576px - everthing is distorted. I don't know what happened, because everything was prechecked because the size matters.
Is someone know what happend and what I can do, to prevent such a mistake? (it is my first After Effects project ever - I'm a nube)
Thank you Dan

mp4 is a compression format based on specific blocks of pixels and the legal sizes are set by the codec, there is nothing you can do except pick another codec if you must have 1500 X 1000 as a final size. Why did you pick that size? If you must deliver an mp4 then you should be working with standard sizes for your compositions and they should be square pixels... Always square pixels for mp4.

Premiere Degrading Quality (after rendering) of Animation Codec mov's and 4444 Codec mov's, which were made from SWF files, originally exported out of After Effects

I am making a cartoon, which was created in FLASH,
Then the SWF's were put into After Effects and exported out as MOV's. (I've tried both AppleProRes4444 and Animation codecs).
Then I put those Mov's into Premiere. Everything looks crisp until I render. Once rendering is done, the video quality degrades. Here's a screen shot of Premiere:
On the left is the source MOV (exported from AE), on the right is the timeline viewer (after rendering). The quality on the right is degraded. Help?
If I use MP4 versions, exported out of Flash, through Media encoder, quality is not degraded.
(Read on for additional info)
It was easy and quick to create my MOV's out of AE, which is why I did it this way. I'm exporting to MOV's so I can edit quicker in Premiere. I find editing to sound in AE really difficult, and I don't edit in Flash (employees provide SWF files to me).
Here is sequence settings in Premiere (these setting were created by dragging an MOV into the sequence and choosing "change settings" to match clip settings.
Help? Please?

I am making a cartoon, which was created in FLASH,
Then the SWF's were put into After Effects and exported out as MOV's. (I've tried both AppleProRes4444 and Animation codecs).
Then I put those Mov's into Premiere. Everything looks crisp until I render. Once rendering is done, the video quality degrades. Here's a screen shot of Premiere:
On the left is the source MOV (exported from AE), on the right is the timeline viewer (after rendering). The quality on the right is degraded. Help?
If I use MP4 versions, exported out of Flash, through Media encoder, quality is not degraded.
(Read on for additional info)
It was easy and quick to create my MOV's out of AE, which is why I did it this way. I'm exporting to MOV's so I can edit quicker in Premiere. I find editing to sound in AE really difficult, and I don't edit in Flash (employees provide SWF files to me).
Here is sequence settings in Premiere (these setting were created by dragging an MOV into the sequence and choosing "change settings" to match clip settings.
Help? Please?

Strange problem after rendering reader extension

Pdf file is working well before rendering reader extension right. After reader extension right one page is automatically created double.
I cannot realize why the page become double. I was analysing with xfa debuger. All properties of page same but page2 is created double.
https://dl.dropbox.com/u/70850345/print/xfaDebuger.jpg
I also moved page 3 next to page1. Then page3 is created double after rendering reader extension right.
DO you know why this page is created double?

Hi,
there are several bugs in you form, which is really 'complicated'.
Most are allowed page breaks for subforms where you did not allow page breaks for the parent objects (the surrounding subforms or pages).
You also set several subforms flowable while the surrounding page are set positioned.
I fixed a few of the problems but not all as I had not the time.
The next thing I don't understand are the many masterpages which have almost the same content.
You'll need just one. All the rest can be placed on the body page(s).
In fact you also only need a single body page which is floating top-to-bottom and allows page breaks.
There you can place all the subforms you currently set as single pages.
https://acrobat.com/?d=pvrhlCnYZtnhkY8HAi7GwA

Version FCE 2 after rendering video, playback is jurky about 10 frames at a time. Audio is fine. What is the fix?, version FCE 2 after rendering video playback is jurky about 10 frames at a time. Audio is fine. What is the fix?

I am useing FCE 2. After rendering the video playback is jurky about 10 frames at a time. Audio is fine. What created the problem?

I had been working on the project for a few days. It is mostly pix and a couple videos. It has several scrolling text segments. Everything was going fine, then after a rendering a large scrolling text it started. It appears that it skips 12 frames each time as I'm playing back.
Sequence:
Tracks 3v, 4 A
Vid Rate 29.97 fps
Frame 720 x 480
Comp DV/DVCPRO-NTSC
Data Rate
Pixel Aspect NTSC - CCIR 601
Anamo
Field Dom Lower (even)
Audio Stereo
Aud Rte 48.0 KHz
Aud For. 32 Bit
The video is a clip I purchased off istock (8sec.) of a flag waving
CLIP:
Size 35.9
Tracks 1V
Vid Rate 30 fps
Frame Sz 640 x 360
Comp. Photo JPEG
Data Rate 1.8 MB /sec
Pixzl Aspect Square
Ana
Field Dom. Not Set
Alpha None / Ingore
Rev Alpa
Composite

Help after rendering when I'm mastering a small video segment is duplicated elsewhere in the timeline, apparently I do some movement

help after rendering when I'm mastering a small video segment is duplicated elsewhere in the timeline, apparently I do some movement

Shane is trying to find out if you're working with material that's not in a fcp friendly format, like h264. It's also possible that your sequence is corrupt. Create a new sequence with the same settings, make the old sequence active, select all (command-a) copy (command-c), make the new sequence active and paste (command-v)

Video squished to the left after rendering

I've been working on some old dvd videos for work and when I render then the clip is pushed maybe 15 pixels to the left. These are the before and after rendering screens:
I read on some other discussions that this from selecting the wrong sequence, but I always let Premiere choose the sequence for me by adding the video into the project and clicking "New Sequence From Clip". I didn't change any sequence settings and I didn't choose a sequence when I created the new project.
Video info:
841 x 480 (1.0)
H.264, AAC
I don't know if it makes a difference, but when I put the clip into the project, Premiere automatically changes the PAR to make it to 710 x 480 (1.1852)
I have Premiere Pro CS6 6.0.2 (072 (MC: 264587)) and I just barely updated it about an hour ago.
I'm on a 15" Macbook Pro w/ Retina display
     -OS x 10.8.4 (12e55)
     -2.5 GHz Intel Core i7
     -8 GB 1600MHz
     -GeForce GT 650m 1GB
Thanks for checking this page out. Let me know what else I can add.

I tried making a new sequence with the widescreen 48khz DV - NTSC and the video had bars on both sides:
I actually wasn't having any problems with videos from this DVD until I reinstalled Premiere Pro today. Would it be worth uninstalling, running the Adobe cleaner, and reinstalling again?

IDVD crash after rendering for 1 movie

I created several DVD so far it was perfect. I am using the same method and format or codec that I was using for all previous movies. This one seems perfect within iDVD but when I try to burn disk image it quits unexpectedly after rendering the project. All the files are stored onto an external firewire HD like the other movies. At this point I have rebuilt the movie from scratch, rebuild the iDVD project from scratch and I don't know where to go anymore. This is what I have in the log file:
Exception Type: EXCBADACCESS (SIGSEGV)
Exception Codes: KERNINVALIDADDRESS at 0x000000001e73f014
Crashed Thread: 29
Could anyone please help

What worked for me was to copy the iDVD project + assets to the local harddrive. Then it would sucesfully render (in the background) and was I able to save a disk image (on the firewire harddisk, because of lack of disk space!). So it seems FireWire related. Possibly a bug that will be fixed in the much anticipated OS X 10.5.3 update. I will do some more tests, with other harddisks, connecting with FW 400 and USB 2. Or Startup from a OS on the external FW drive.
I'm not surprised FW400 is slightly more stable but besides that it is always better to have your largest and faster HD as your primary boot volume since this is the drive that will do most of the rendering and encoding for iDvd and /or DVDSP.
I was trying to explain this on an earlier post to another forum member. Not sure if you happened to read it but the link is here:
http://discussions.apple.com/message.jspa?messageID=7225024#7225024

Relative Location of Words after Rendering

I was using the animation tool to drop words from the foreground to the background in time to a drumbeat. I noticed when I rendered it that the words lost video quality as they receded, so I decided I would cut the video level short after the animation and then have a basic statiory word in its place. I find that no matter how I try to manipulate the words, they do not show up in the same place after rendering.
This is Premiere Elements 9.
Thoughts?

I knew this was going to be difficult, as I am new and not using correct terminology I think. I did not use preset text animation. I used keyframes. So I keyframed location and size to create an effect as if the word was rushing from the observer to the screen and then stuck. Only thing was, when it stuck, it had lost some video quality. So I was going to cut that video track the instant the "animation" keyframing was done and replace with with a nice, newly minted and properly sized version of the same word. I placed the word higher in the timeline list of tracks so that it lapped over the original, and placed it directly in the same location.
Sadly, when it rendered it was nowhere near the same location in terms of left to right, although it was in the corect location in terms of top to bottom.
Hopefully that helps some...?

Iphone4 would not restore Error -50. I have tried to restore and it restored it to the point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out.

Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????

It tells you to go to Error 13 and 14 if you receive error (-50).
Here is what I have tried...
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
Put a USB 2.0 hub between the device and the computer. Didn't change anything.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts. Removed all virus protection and firewall.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this.

Is it still possible to downgrade from ios 6 to ios 5.1.1 on my ipod touch 4th gen as of Sept.24?Also, if I use a backup created AFTER updating to ios 6 when I restore/downgrade to ios 5.1.1, does it become ios 6 again because of the backup?

Is it still possible to downgrade from ios 6 to ios 5.1.1 on my ipod touch 4th gen as of Sept.24? Also, if I use a backup created AFTER updating to ios 6, when I restore/downgrade to ios 5.1.1, does it become ios 6 again because of the version of ios 6 that I created the backup on?

There has never been a legit way to downgrade.
It will always restore to the latest available software.

Artifacts created after rendering

Similar Messages

Maybe you are looking for