Artifacts showing up in my file-- send to--- color XML workflow

I lurked these forums, couldn't find anything covering this issue.
I am kicking out my picture lock from FCP to Color using the file -> send to-> Color utility.
When Color opens up, with my XML data in the timeline the image in my viewport ends about 100 pixels from my frame. the remaining 100 pixels are artifacts generated by taking the final pixel in every row and repeating them to edge of my 2048x1024 frame, looking like a stretch filter was applied on it in After Effects.
These are not in my 2k prores HQ clips in FCP.
My project settings look okay.
Where should i start trouble shooting this?
The clips are Apple Prores HQ 24fps
thanks in advance, folks.

What video card are you using?
On the project I just wrapped I noticed the same thing when pulling up still stores. The bottom 100 pixels or so seemed to have come from a previous image. Toggling the still store on/off fixed the issue. But every time I pulled up a new image on the SS I'd have to toggle it to fix.
This happened on both a ProRes and a DVCPro HD workflow.
- pi

Similar Messages

New Send to Color/XML problem

Well new to me anyway. Maybe someone has seen this and can help me get around it. I finished an edit and sent the 85 shot sequence to Color. The sequence has only video clips in it with no filters, no off-speed shots, nothing but dissolves between shots. When Color finishes importing the sequence at the head of the timeline there is one big long clip that's not the right shot and it's the same 3 seconds of video over and over. It looks like part of the XML made it to Color because there are dissolve icons laid over this big clip where they are in Final Cut. After that in the Color timeline are the rest of the shots in the sequence from Final Cut. I tried breaking the sequence in half and sending that to Color but I got the same results with a different big long clip (and the dissolves) at the head of the timeline. Anyone seen this one? Help is appreciated.

I went back to FCP and removed all dissolves from my sequence and in doing so I noticed there was a clip that had the speed set to 99%, somehow "remove atributes" missed that. I re-sent to Color and everything seems to be working just fine now.
Hey Apple an update to this awesome software would be much appreciated, Soundtrack Pro2 too.

'Send to Color' Problem

I have just installed FinalCutStudio2 and am trying to use the File>send to color command, (on a sequence)
It looks like it's working, color loads and goes to open BUT as soon as it opens it closes in the blink of an eye with no error message or crash message, I've tried opening color first but as soon as i click File>send to color it automatically closes it.
if i export an XML and open it with color it works but the send to color command will not work,
Any idea's???

I had the same problem and it was related to the clip being in a folder with an ampersand (&) in the folder name. If there is an ampersand in the file name or folder name that the clip is in Color will close right after opening.
Bob
Dual 2.7 GHz G5 & MacBook Pro Mac OS X (10.4.9)

I cannot erase my emails definitevely show me a message "file cannot send to the papelera"

I cannot erase my emails definitevely show me a message "file cannot send to the papelera"

How about in your Applications folder?

File Sender adapter with File content conversion

Hi
I'm having problems picking up a flat file that has some junk characters in the file.
I'm usign a file sender adapter with file content conversion. The adapters shows the following error-
Conversion of complete file content of to XML format failed around position 0: sun.io.MalformedInputException
this is the sample data with junk char's -
A20099201009999009999060815160505051700130008151vÿÿÿÿ³ r 0OK0476 31N016227241915840IV 00840 ÿÿÿ ÿ ÿÿÿÿÿÿÿÿ ÿ ÿÿÿ
There is not much in the file content conversion. This is a fixed length file, I'm just pickign it up & passing it to an inbound proxy. All my processing is in the proxy.
I'd appreciate any suggestions.
Thanks
Rachana

Hi Rachana,
Do you use a specific "encoding" like UTF-8 or ISO-8859-1 in your Sender CC?
To be simple, Encoding is linked to country, you can find all "iso-nnnn" via google or some of them in sap help.
http://help.sap.com/saphelp_nw2004s/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Moreover, with your source file opened thanks to Notepad (for instance), use option "save UNDER", you will the encoding use by your file
Mickael

Problem in File Sender Adapter in File with quotes

Hi experts.
We're having a problem in File Sender Adpapter.
We've configured the adapter with FCC. We use the fieldSeparator = ; to convert the file to xml.
The problem arises when between two ; appears a quote. For insantce in this line:
HUMALVAL MASCOTAS S.L.;"AV/DE EUROPA SN;P.IND.ALCORCO;28922;ALCORCON;40.349968;-3.847452;
The adapter shows this error:
More elements in file csv structure than field names specified.
If the line was (without "):
HUMALVAL MASCOTAS S.L.;AV/DE EUROPA SN;P.IND.ALCORCO;28922;ALCORCON;40.349968;-3.847452;
everything would work correctly.
How could we solve this?
Thanks in advance.
Regards.

Hi,
Please use xml.enclosureSign=u201C in your sender FCC.
Hopes this helps to you.
Regards,
P.Rajesh

Bad adapter engine configuration - File Sender scenery doesn't work

In file sender scenery, the adapter doesnu2019t pass any message to the Integration Engine.
When I take a look to the communication channel monitoring it shows the channel with status OK (Green). But when I look into the audit log of the incoming message I see the following error:
Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR ErrorText: ErrorStack: Error in sender agreement for party , service VLTEST, interface namespace urn:damm.es:vialactea:logistica, interface oa_SimpleLine No sender agreement found for , , , , ,
The sender agreement exists in the Directory and the status of the cache is OK.
But in the Message Data I see this End Point URL: http://asrmd:8082/sap/xi/engine/?type=entry
This is adapter is attached to a development system instance number 80 and the port of the above URL is a reference to the TEST system instance number 82. I investigate this issue but I canu2019t find where the miss-configuration is causing this bad End Point.
Have anybody an idea about this problem. Itu2019s the first time I found this kind of miss-configuration.
All other adapters are working fine. The file receiver adapter is working fine too.
Thanks in advanced.

Hi Sergi,
Now is clear. Sorry but I didn´t see your posts properly. I didn't move the cross bar until the final.
So now I change my point of view.
Go to Runtime Workbech --> Component Monitoring --> Integration Engine --> Test Message. Which URL is displayed here? is it right?
If don't, effectively you have wrong configured your URL of the Integration Engine.
Go to SLD --> Business Systems --> Select your XI business System. At the Integration Configuration tag check the URL, if it is wrong, change it and save the changes. Remember that the rol must be Integration Server.
Refresh the caches.
Hope it is usefull.
Carlos

In my Scenario i want to configure file sender Adapter.But in Parameters

In my Scenario i want to configure file sender Adapter.But in Parameters, for Adapter Engine Column It Shows blank,Integration Server will not appear for that column.Finally It Gives Error- Adapter Engine is not Defined.
What is the Reason for this...
Please Clarify ASAP...
Thanks..

Hi Chiru,
      It seems that you may have missed some steps while doing the configuration. After doing all the activities in SLD and IR and activating all the components created in IR it should work.
      Plz check that you have selected as Adapter Type as File and correct namepace in the next field. Transport Protocol as File System (NFS), Message Protocol as File and I hope after all these information you will get Integration Server in the Adapter Engine field.
    If the problem persists please revert back.
Warm Regards,
Subhasha Ranjan

File Sender Communication channel with error

Hi,
One of the File sender CC is in red but shows "Functioning". But in the Process Detail section it just showing
5/10/11 2:24:00 AM d28c6542-0d7e-453b-1d96-9e0a18159315 Retry interval started. Length: 60.0 seconds
5/10/11 2:24:00 AM                                                                     Processing started
5/10/11 2:23:00 AM d28c6542-0d7e-453b-1d96-9e0a18159315 Retry interval started. Length: 60.0 seconds
5/10/11 2:23:00 AM                                                                       Processing started
5/10/11 2:22:00 AM d28c6542-0d7e-453b-1d96-9e0a18159315 Retry interval started. Length: 60.0 seconds
5/10/11 2:22:00 AM                                                                      Processing started
Please let me know is there any error with my channel ot wny is it red then?
There is no Polling step in the Process Details.. Please reply ASAP
Thanks,
Shweta.

The Status of the channel is "Processing Erros in last 20 seconds". And in the processing deatils it just show the below two steps.
5/10/11 2:24:00 AM d28c6542-0d7e-453b-1d96-9e0a18159315 Retry interval started. Length: 60.0 seconds
5/10/11 2:24:00 AM                                                                        Processing started
5/10/11 2:23:00 AM d28c6542-0d7e-453b-1d96-9e0a18159315 Retry interval started. Length: 60.0 seconds
5/10/11 2:23:00 AM                                                                         Processing started
5/10/11 2:22:00 AM d28c6542-0d7e-453b-1d96-9e0a18159315 Retry interval started. Length: 60.0 seconds
5/10/11 2:22:00 AM                                                                        Processing started
It is continuasly showing the same message ID "d28c6542-0d7e-453b-1d96-9e0a18159315 " but this ID does not exist in SXMB_moni not in RTW message monitoring.
If I double click the message ID shown in the CC process details it shoes me below content.
Time Stamp Type Description
2011-05-09 22:03:00 Information Channel FileSenderGeneric: Converted complete file content to XML format.
2011-05-09 22:04:00 Information Channel FileSenderGeneric: Converted complete file content to XML format.
2011-05-09 22:05:00 Information Channel FileSenderGeneric: Converted complete file content to XML format.
2011-05-09 22:06:00 Information Channel FileSenderGeneric: Converted complete file content to XML format.
Please tell me what is the problem. there are No java Locks ...I have checked that.
Shweta.

File Sender Communication Channel not working

Hi All,
We have one file sender channel which sends file after every 3 hours.
But currently it has stopped the processing of file.
If we see in RWB it shows that "Correctly configured and started",but if we start and stop the chanel it doesnt show any processing started message.
File is there in the folder but the channel doesnt poll the folder to pick up the file.
We have refreshed the cache and activated the channel again.
But still no luck,does anybody have any idea?

Hi Shweta,
Please check the parameters of your File adapter. There can be following possibility if File adapter is not picking the file :
1. File adapter is not active
2. Incorrect File name, Directory name or path,
3. File does not exist in the source directory.
4. If you are accessing file from other server (use FTP protocol) check you have READ and WRITE access.
Thanks
Farooq.
<b>*Rewards points if you find it useful*</b>

File sender communication channel error

Hi gurus please help me on the below issue ,suddenly my file(sender)communication channle is showing error status stated below error ,it is just simple scenario like file to proxy upto one hour back it is working fine suddenly it is showing below error plz give me the reply im in production suport
Error: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception during lookup operation of object with name localejbs/ModuleProcessorBean, cannot resolve object reference. [Root exception is javax.naming.NamingException: Error occurs while the EJB Object Factory trying to resolve JNDI reference Reference Class Name: Type: clientAppName Content: sap.com/com.sap.aii.af.app Type: interfaceType Content: local Type: ejb-link Content: ModuleProcessorBean Type: jndi-name Content: ModuleProcessorBean Type: local-home Content: com.sap.aii.af.lib.mp.processor.ModuleProcessorLocalHome Type: local Content: com.sap.aii.af.lib.mp.processor.ModuleProcessorLocal com.sap.engine.services.ejb3.runtime.impl.refmatcher.EJBResolvingException: Cannot start applicationsap.com/com.sap.aii.af.app; nested exception is: java.rmi.RemoteException: [ERROR CODE DPL.DS.6125] Error occurred while starting application locally and wait.; nested exception is: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5106] The application [sap.com/com.sap.aii.af.app] will not be started, because of the server state is [STARTING]. at com.sap.engine.services.ejb3.runtime.impl.DefaultContainerRepository.startApp(DefaultContainerRepository.java:315) at com.sap.engine.services.ejb3.runtime.impl.DefaultContainerRepository.getEnterpriseBeanContainer(DefaultContainerRepository.java:106) at com.sap.engine.services.ejb3.runtime.impl.DefaultRemoteObjectFactory.resolveReference(DefaultRemoteObjectFactory.java:55) at com.sap.engine.services.ejb3.runtime.impl.EJBObjectFactory.getObjectInstance(EJBObjectFactory.java:144) at com.sap.engine.services.ejb3.runtime.impl.EJBObjectFactory.getObjectInstance(EJBObjectFactory.java:63) at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl._getObjectInstance(ObjectFactoryBuilderImpl.java:77) at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl.access$100(ObjectFactoryBuilderImpl.java:33) at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl$DispatchObjectFactory.getObjectInstance(ObjectFactoryBuilderImpl.java:228) at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:283) at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:394) at com.sap.engine.services.jndi.implclient.OffsetClientContext.lookup(OffsetClientContext.java:223) at com.sap.engine.services.jndi.implclient.OffsetClientContext.lookup(OffsetClientContext.java:242) at javax.naming.InitialContext.lookup(InitialContext.java:351) at javax.naming.InitialContext.lookup(InitialContext.java:351) at com.sap.aii.af.lib.util.ejb.FastEjbFactory.createEjbInstance(FastEjbFactory.java:83) at com.sap.aii.af.lib.util.ejb.FastEjbFactory.createEjbInstance(FastEjbFactory.java:51) at com.sap.aii.adapter.file.File2XI.send(File2XI.java:3451) at com.sap.aii.adapter.file.File2XI.processFileList(File2XI.java:1332) at com.sap.aii.adapter.file.File2XI.invoke(File2XI.java:622) at com.sap.aii.af.lib.scheduler.JobBroker$Worker.run(JobBroker.java:500) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:182) at com.sap.engine.core.thread.impl3.SingleThread.run

Hi Thank for your reply Nbendu and sorry for late reply .
My issue was now resolved but i want to know why this is happend i am getting this issue when ever there is any Basis maintaenance Happens.
If it is due to Basis maintnance then with same combination we have 2 more interfaces is there it is not affecting the other .
Any thoughts.
Regards
Madhu

File sender communication channel stop working

Hi Guru,
I have a file sender communication channel. It usually works good. But sometimes it just stop working. And In RWB, it shows no error. If I stop it and restart it in RWB, it immediately works again. This happens once a while. Any ideas?
Thanks,
Meiying

Hi,
option 1--
Do some dummy changes and activate channel and try and perform cache refresh.
If still not working then stop and restart SFTP service,if still no luck then restart JAVA stack
option 2
try to put timeout value in the channel.
Regards.
Mastan

File sender adapter not reading

Hi experts,
We're getting an issue with the File sender channels in our system.
None of the files we place in the source directory is read by our channels.
These channels are NFS. We've already gave all permissions to SO user <sysid>ADM.
The CC monitor don't show us any error, it's working as if there were no files in the directory, when there are.
Does anyone know what could be happening? And is there any other place/log when we can check?
Thanks in advance.
LUIS B.

Hi Luis,
Check the permission bits of the file you are trying to read . If the source system is unix all of RWX bits must be set to 1. If you do not have access to change the file access permission in unix folder you can take help of Basis team or another way is to use the option Run Operating System Command Before Message Processing. Here you can mention
chmod 777 *.*
This will make all files available for PI to read, write and execute.
Second reason maybe that your channel might have got locked and is unable to pick up files. Although in CC monitoring you can see polling is going on. Please request your Basis team to look into the communication channel properties.
Hope this helps.
regards
Anupam
Edited by: anupamsap on Jun 13, 2011 11:52 AM

File Sender Scenario - Mapping error message

Hi All
Scenario
I am trying to develop a test scenario where a record is read from the file and sent to R/3 using RFC (Bapi)
So i believe this will involve a file adapter as sender and a RFC adapter as receiver, I have configured data types, message types, message mapping, interface mappings, sender determination, receiver determination etc.
Problem
When i put the text file in the polling directory the file is read, but there is an error,
On checking Processed XML message in SXMB_MONI I see that the following steps listed
1 - Inbound message (CENTRAL)
2 - Receiver Determination
3 - Interface Determination
4 - Receiver Grouping
5 - Message Branch According to Receiver
6 - Request Message Mapping
7 - Request Message Mapping
Step 1 - 6 does not show any error message, step 7 has an error with the following message
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_basic_paycreate_file_to_rfc_map~</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException<;/SAP:P2>
<SAP:P3>Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:P3>
Additional Information
My Business System Commnication channel has a Sender File adapter, this file sender is configured to read from file system from a certain directory and message protocol is File Content Conversion.
In Content Conversion parameters input fieldname and input separator are configured (does anything else need to be configured in this section?)
My input file is of the structure aaa,bbb,ccc,ddd,eee,fff,ggg
My Data Type is of the structure
<data header>
     <aaa></aaa>
     <bbb></bbb>
     <ccc></ccc>
     <ddd></ddd>
     <branch1>
               <eee></eee>
     </branch1>
     <branch2>
               <fff></fff>
     </branch2>
     <branch3>
               <ggg></ggg>
     </branch3>
</data header>
Questions
First question is why is there 2 instance of Request message mapping showing up in the monitor? Isn't this supposed to show up only once?
Second question it appears that the problem is something to do with Mapping (Message Mapping) but i tried to test the message mapping manually using the data generated in the payload and it passes the mapping successfully.
Third question, how is the input flat file converted to the complex structure of data type (as mentioned in additional information above) is this done by the input.filedNames that assigns the corresponding values from flat file to the data type?
Fourth question - is there a way to run the process step by process (as a step through in other programming IDEs?) so the problem can be more easily identified?
Thanks
Anant

Hi All
I little update - it appears that some of the scenarios developed earlier that were working earlier are now also failing at the same process of mapping with this error message.
So i am suspecting that this is not a problem with the mappings in my scenarios but rather a some technical setting related to how XI invokes this class - com.sap.aii.utilxi.misc.api.BaseRuntimeException.
Does any one have any ideas what i can check to confirm this? Whether the problem is in the technical setting or the scenario configuration?
thanks
Anant
error message attached.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_CheckDeposit_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_CheckDeposit_: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

How to specify source directory in File sender adpate using (NFS)?

Hello experts,
I am doing File-PI-Proxy scenario.
Input file is available on machine which is within the Network area and FTP is not available on that machine.
For this reason I am using the NFS Transport Protocol.
In ID File sender I have specified Source Directory:-
IP Address\Directory
I am geeting the Error in RWB as 'Configured source directory '
IP Address\Directory' does not exist'.
Please suggest how to specify the Source Directory path.
Regards,
Jagesh

Hi,
If you want to use NFS protocol, then the file needs to be within the a folder in the XI server and not outside it, In your case if you need to use the file in a different machine which is on a network then try to use the FTP protocol.
Refer this blog:
/people/shabarish.vijayakumar/blog/2006/08/01/along-came-a-file-adapter-mr-ftp-and-rest-of-the-gang which shows the details of how you can install a local FTP and use it
Regards,
Nithiyanandam
Edited by: Nithiyanandam A.U. on Mar 18, 2009 10:43 AM

Artifacts showing up in my file-- send to--- color XML workflow

Similar Messages

Maybe you are looking for