Artist won't show up, PLEASE HELP

I just got my 30 gig video ipod today and loaded all my music on it, and one of my bands Keane, wont show up in my artists list. It goes straight from Kansas to The Killers. But if I go to the All Songs list then Keans' songs are in there. Any help would be most appreciated.

OK, i think I figured it out, Keane wasnt the only band who wasnt in the Artists list, some others were too. and it was because they were put in the Compilations folder on my computer. So i turned OFF compilations on my Ipod, and unchecked the selection in preferences to "group compilations while browsing" and deleted the compilations folder. But when i play the Keane songs it automatically puts them in a new Compilations folder. SOMEONE PLEASE HELP THIS IS REALLY ANNOYING. thank you very much.

Similar Messages

I just got the new ipod touch (5th generation) and it will show up on my computer but it will not show up on itunes and it won't connect. Please help!

I just got the new ipod touch (5th generation) and it will show up on my computer but it will not show up on itunes and it won't connect. Please help!

See:
iOS: Device not recognized in iTunes for Windows
You need iTunes version 10.7

HT201412 My iPod touch 4G won't charge. I charged it and when I took it off charge it was really hot but it showed it was fully charge then when I turn it on the battery was dead and know it won't charge. Please help thanks.

My iPod touch 4G will not charge. I charged it and when I got it off charge it was really hot but showed it was fully charge then when I turned it on again the battery was dead. Now it won't charge. Please help thanks!

Try the standard fixes to rule out a software problem:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod
if still problem that indicates a hardware problem and an appointment at the genius Bar of an Apple store is in order.
I suspect you have a hardware problem.

When I boot into Win7 I see the windows boot up logo, the. I see my mouse and the screen goes black! It goes black in the login screen, I type my password and I hear the login sound but when I press F2 the brightness won't change! Please help!!!

When I boot into Win7 I see the windows boot up logo, the. I see my mouse and the screen goes black! It goes black in the login screen, I type my password and I hear the login sound but when I press F2 the brightness won't change! Please help!!!

Hi Emma,
Thank you for using Apple Support Communities.
I understand that your Thunderbolt display is just showing a black screen when you boot your computer. The following article should be of help in troubleshooting your display.
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Cheers,
Jeff D.

Artists won't show up?

When I go to the artist menu on my iPod classic 80gb, some of the artists don't show up. Their songs are still there though because I can get to them from the album and song menus. Why?

It could be that you have inadvertently imported these CDs into iTunes as part of a compilation. If so, the artists won't show in the artists menu on the iPod.
To check, highlight the tracks on one of the offending artists CDs in iTunes, right click and select "get info". This brings up a multiple song info window, and from there you can check if you have 'yes' in the box marked "part of a compilation".
If you have, select 'no' instead and click 'ok'. Do this with any CD that has this issue. This will alter the info in iTunes, and you should then connect your iPod and synchronize the changes.
The problem arises because the information contained on the Gracenote CD Data Base (where iTunes gets all it's album/artist/track info from), is sometimes incorrect. It can show CDs as compilations when in fact they are not.
You should also check that the songs have album name info in their ID tags.
See: Some songs don't show under artist on my iPod.
Once you add a second album name for that artist even for a single song, ALL the rest of the songs should now show up under that artist, even those without album names.
Providing the spelling for the artists is exactly the same of course.

The 2.1.3 Software update won't work, the new version of iTunes won't download. Please help.

For several months now I have not been able to find a solution to either of these two problems. When I have the Apple Software Update program open and I click update, it loads for a second and then goes back to the usual page saying to update. It will not update. I have also tried, multiple times, to install the new current version of iTunes and that won't work either. I've tried to repair iTunes by going to Control Panel > Programs > Repair and it still won't work. Please help because I'm trying to download a new app but it requires the new version of iTunes. I am using a Windows Vista and I'm this is for my 4th generation iPod touch.

Did you try simply downloading the latest version of iTunes using the link below and then installing it on top of the older version?
http://www.apple.com/itunes/download/
B-rock

I use FPT to try to view a directory on a remote server that contains 19000 files, only 10000 are showing. Please help.

I use FPT to try to view a directory on a remote server that contains 19000 files, but only 10000 are showing. Please help.

Hi Steve,
You can be right that DISM don’t support the scenario that User profile and System are in the separated volumes.
As a workaround, we should use the defaults to put the profile on C: during capture image, and then set the profile path to be on the D: drive after the image deploying.
Please refer to below KB for how to using Sysprep to redirect profiles’ locations.
Customize the default local user profile when preparing an image of Windows
http://support.microsoft.com/kb/973289/en-hk
Hope these could be helpful.
Kate Li
TechNet Community Support

Some artists won't show up...

Some artists on my iPod won't show up in the artists menu, but if I go the albums, their album is there so the only way I could access that artist is if I went to Albums....how do I fix this?

It could be that you have inadvertently imported these CDs into iTunes as part of a compilation. If so, the artists won't show in the artists menu on the iPod.
To check, highlight the tracks on one of the offending artists CDs in iTunes, right click and select "get info". This brings up a multiple song info window, and from there you can check if you have 'yes' in the box marked "part of a compilation".
If you have, select 'no' instead and click 'ok'. Do this with any CD that has this issue. This will alter the info in iTunes, and you should then connect your iPod and synchronize the changes.
The problem arises because the information contained on the Gracenote CD Data Base (where iTunes gets all it's album/artist/track info from), is sometimes incorrect. It can show CDs as compilations when in fact they are not.

Firefox just won't open! I tried reinstalling but with to no avail. It worked well until yesterday so I downloaded new ver.5 but still it won't open. :( Please help.

I tried reinstalling but with to no avail. It worked well until yesterday so I downloaded new ver.5 but still it won't open. :( Please help.

See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
Create a new profile as a test to check if your current profile is causing the problems.<br />
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)<br />
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

If I already purchased FaceTime for Mac and recently upgraded my HD. How can I retrieve that app again? I found it in my Time Machine back up, but the files won't work. Please help.

If I already purchased FaceTime for Mac and recently upgraded my HD. How can I retrieve that app again? I found it in my Time Machine back up, but the files won't work. Please help.

Nope. I do the same exact thing. If you have DVD's and blu-rays you can't download a free application called Handbrake. You can set it to Apple TV2 automatic format and they will come out as playable m4v's that can play I'm iTunes. All you have to do is turn on Home Sharing in both iTunes and your Apple RV and you'll be good to go!

When I'm in school, the pages in Safari won't load. Please help?

When I'm in school, the pages in Safari won't load. Please help?

When I'm in school, the pages in Safari won't load. Please help?

Satellite m300 won't boot! please help!

Hi,
I've got a bit of an issue here.. I have a Satellite m300.. a white one..
and it won't boot... I've had this very issue before but it turned out to be an external USB HDD that stopped it from booting up but now even with everything removed it still won't boot.
And it was fine until yesterday, it just gave up.. I am away from home for work so I have all the work stuff and unfortunately without my recovery cd, but my guess is that it won't even read it..
So this is what happens..
turn on..
all light come on.. including power and all the white lights around the keypad..
and then maybe 5 sedconds later caplock and numlock(?) green lights flash..
then it's a dead still.. no HDD activities or sound.. just dead quite..
the screen remains black blank through out..
it seems to get stuck here before reaching the post screen.
i thought the power button usually took more than just a push to turn off? it instantly swithces off with a single push of the power button..
I think this laptop is like on sleep or something and can't seem to wak up.. maybe?
And it has vista.
Please help.. I have some important work files I need to recover at least before formatting..
and that has to wait till I get home which won't be for a month or so..
which also lets me take it back for warranty as well..
any help appreciated!!!
cheers,
Min

Quote
Originally posted by syar2003
If running a LCD display with DVI connection , try to hook it up with
an analog VGA cable.
Can also be that the motherboard fails to initialize the vga AGP card.
Turn off all power incl. AC .
Disconnect all devices from motherboard : AGP/memory/drives/floppy/USB/PCI cards etc. take out the 20pin & 4pin PSU connectors and reset the motherboards
cmos .
Assemble PSU connectors ,only one DIMM module and graphics card and turn it on and se if you get a post .
Just removed all components. I reset the CMOS. I then reconnected the 20pin and 4pin, 1 stick ram, and the video card (no ide devices, no mouse, keyboard cd drives) and the monitor doesn't show up. I also tried another monitor so it isn't the monitor.
Could it have a bad AGP port?
Any other suggestions? I am thouroughly stumped. Also the power and reset buttons don't work no matter what configuaration I put the front panel connectors in. The Power LED is lit up and it doesn't work and the reset light is off and it doesn't work.
Also noticed one of my fans connected to one of the two other fan pins on the motherboard isn't working.
What a nightmare.

My iMac won't boot up please help

Please help me. My iMac just won't start up. Thank you

Does it try at al, or no sign of anything at all?
Can you boot from your Install Disc holding c key?
Does holding Option or alt key at bootup show any choices?
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214

Multi-angle won't work..please help!

This problem is using version 2.0.0 (sorry, I hope someone out there still remembers) and has been replicated on two seperate computers. The first is an ibook g4 1.33ghz with 512 ram...the second a dual g5 2.0 ghz with a 2 gigs of ram. The problem occurs during the build. On the g4 the problem crashes the program, on the g5 there is a internal muxer error and the build process cannot complete. I first noticed the problem with a big project that was mostly audio with slide shows...so I stripped it down to the bare essentials and the problem is still there. This is what I do: new project> import 3 aiff files (16bit/48khz) and 2 jpg images > copy the first jpg into a slide show 3 times and add one aiff to each slot > convert to track > add the second jpg into video track 2 under each of the first jpg's (the size auto-matches) > make basic menu to start playback of slideshow > simulation works fine, angle switches fine > crashes or stops on build (depending on computer using)
things i've tried that haven't worked > different jpgs, ones that have the same dimensions > fix markers in the track menu preferences > tried using my internal drive instead of external for both originating files and build files > if i delete the second video track of jpg's the build goes fine so this is definatly a multi-angle issue...I've heard of bit-rate issues with multiangle, but these are jpg's, there is no video...
Someone PLEASE help me
Thanks

Ok thanks for the help... I don't know how helpful it will be though... let me explain what I'm trying to do, which will explain why some of your suggestions wouldn't work. I record live concerts and I'm just trying to fit a full concert onto a dvd. I would like chapter markers at the beggining of every track, though I would like absolutly no pauses between tracks (tracks have been cut to cd sector boundries of 1/75 second, which seems to work fine on DVD even after converting from 44.1 to 48. ). I would like 2 menus ... a welcome screen and a setlist screen linked to each song. I would like the show to play in it's entirty with a bands logo on the screen (which is the first JPG) and have the second angle just black (to save tv sets from frying). If the show is 20 songs then I create a 20 slot slide show with the bands logo and the 20 songs. I then covert this to a track...as this is the only way to add an alternative angle. If I don't add 2nd angle of black, the burn goes fine, if I do then it crashes.
Now if I were to encode the jpg's to mpeg2 before adding to the project this would mean I need over 3 hours of each, cut in 20 different spots that correspond exactly to the audio.
Now the quality of the audio is very important to me so I'm not willin to use any lossy compression scheme. The whole disc is really just for listening too and is of an audiophile nature. Now I understand AC3 does a pretty good job, which is fine for movies, but for my purposes I need it to be exact. So this means I would have to fit the 3 gigs of audio along with 6 HOURS of mpeg2 video encoded from the 2 simple jpg images that take up less than a mb themselves. This is simply too much data, I can't fit it onto the DVD.
What's nice is what DVDSP is suppose to do is convert the jpg's for you and they only then take up a very small amount of room, and stay on for the full 3 hours none-the-less.
So you see any workaround that envloves making the slideshow as video in FCP beforehand won't work because I'm going for 2 angles at over 3 hours with uncompressed audio.
Now you say that DVDSP converts the jpg's to mpeg2 anyway so I figure it must just keep looping the same video over and over to save room..because there is no significant increase in size from adding the jpg. It's definatly not making a 3 hour mpeg2 file. So if I encode the jpg beforehand, say for 30 seconds...how do add it to the project in such a way that it just loops the video over and over to save room (the same way it does internally with the jpg) Keep in mind I need to make the video fit the audio tracks exactly with chapter markers inbetween. When adding jpg's to a slideshow and then converting to a track this is done automatically and when I add the second jpg to V2, the length auto-matches to the chapter markers. So it's very easy when working with still pictures ... but how do I do it so simply with a 30 second mpeg2 clip? And make sure that it's always referencing the same clip without having to add it umpteen times and thus uincrease the disc size beyond capacity.
Now as for the multiangle encoding fix ... lets say I proceed with the two jpg images as they are and let DVDSP do the encoding... I want to make sure both streams are compatible which is probably why the build hasn't been working.... I know the markers and length are good because the slideshow added them and the second jpg autosizes to them...and i have fix markers checked in track preferences. But how do I make sure that they have the same GOP structure and that they will have the same bitrate? Now the pics are very different so a different bitrate is expected. One is just black and the other is a band logo. But I tested it with identical pics in both video tracks to see if it was a compatability issue and the build still failed.
Ok so I don't neccesarily need to use jpg. The band logo is jpg but I can convert it...the black is just a slug from FCP exported as a still. What's the best format to use for what I'm trying to do? What has the best success rate for encoding? Also you mention having access to a decent encoder. For $1000 i was hoping that I was getting one in the package ... bewtween FCP, quicktime, compressor, or DVDSP ..it's rediculous that a decent encoder wouldn't be included... what would you consider a decent encoder ... and of the ones I have which one should I be using (for future projects involving video)?
I know this is a tough one, I appreciate any help that can be given.

Slide Show Problems--Please help

In Go Live CS 7.0.2, why does my slide show preview fine, but when I upload it to the internet it doesn't work? Please Help!
Trouble page...
http://www.ifsoinklined.com/Pages/traditional.html
Thanks!

In article <[email protected]>,
[email protected] wrote:
> THANK YOU A MILLION TIMES! What is wrong with me?
I'm sure there's nothing wrong with you. Just make sure your GL is set
to automatically a) flattend the Script Library and b) to upload *all*
modified items. From that point on it should be all smooth sailing :-)
Cheers Martin

Artist won't show up, PLEASE HELP

Similar Messages

Maybe you are looking for