Artists name appears more then once
I just uploaded a bunch of Smashing Pumpkins songs and then later on when I went to listen to my iPod i'm scrolling through the Artists and it's in there 4 times
Smashing Pumpkins
Smashing Pumpkins
Smashing Pumpkins
Smashing Pumpkins
each one has the same exact songs in it why is it in there 4 times and how do I fix it - Thanks
My first thought is to click to edit the title of them. It's hard to illustrate on here but sometimes there is an extra space at the end of the artist name or before it. That will cause it to make more than one show up since the ipod reads it as two different things. Just go through and make sure there are no extra spaces or anything and that the names are EXACTLY the same to have only one show up.
The one thing that makes me think that isn't the problem is because you said ALL the same songs are in them. Usually the one with the wrong title will show up with that single song in it. Hmm..Look and see anyway, it wouldn't hurt.
Similar Messages
-
In specific, I own a 2007 Macbook Notebook, and it is an Intel Core 2 Duo MB21.00A5.B07. Last year, it became necessary to replace the hard drive, and was informed that the reason for the replacement was that the hard drive had reached the end of its lifespan.
My question is how long do Macbook notebook hard drives typically last? This also is in the context of frequent use of the notebook.
Additionally, is it a good idea to replace the hard drive more then once, or will the hard ware on the notebook, after I'm assuming about six or so years, be too out of date to accommodate a second or third hard drive replacement?
Also, since the replacement was still covered under an applecare plan (it's expired now), the general cost of replacing a Macbook notebook hard drive is not known? What is the cost generally expected of a hard drive replacement? This is in relation to repairs conducted at an applestore location (as opposed to a third party repair center).justinfromlos angeles wrote:
Also, this means that, the settings of a system like Snow Leopard, in addition to all other personal settings from a current hard drive, can be copied to and from an external hard drive?
Your entire system can be copied to an external HD in bootable form. It's generally referred to as cloning, and there are a number of applications available to assist in the task.
SuperDuper
CarbonCopyCloner
LaCie Silverkeeper
To name but three.
Furthermore, once cloned, should you have to replace the internal drive, it's easy to boot from the external and clone the system back to the internal.
justinfromlos angeles wrote:
If so, do you know where one can purchase an external hard drive and a replacement hard drive?
As I don't live in the US, it's difficult for me to reccommend retailers, but any computer store (including Apple) can supply external HDs. Be aware that not all HDs from some manufacturers will play well with Macs; Western Digital I believe needs careful selection of the correct model. There are plenty of contributors who can no doubt help on that front. Personally I use LaCie and Iomega. Note that these are purpose built externals and come with their own enclosure and all cables reqd.
One thing you will need to do with most of them is to use Disk Utility to partiton them correctly (GUID system for Intel Macs) and set the file system to Mac Extended (journaled) before cloning.
justinfromlos angeles wrote:
There is one last question. Say I've replaced the hard drive on the same computer for nine years or so. Despite the hard drive being new, would the hardware of the computer be too out of date to accept an up to date replacement hard drive?
The hardware of the computer dictates what sort of internal drive you buy; earlier models used IDE interfaces, current models use SATA and these are not interchangable. However System Profiler will tell you what sort you have. It's still possible to buy compatible HDs for the early iMacs, c. 1998/99 so there's no reason to believe your model will suddenly become defunct. -
Error: An attribute cannot appear more than once in the same start tag
Hi Everyone,
when i run the page sometimes it works fine but sometimes it throws Compilation Error as below.
"Error(502,1224): file:/C:/Jdeveloper/jdevhome/jdev/myhtml/OA_HTML/fwk/t/Session_2055663493/region1.uix<Line 502, Column 1224>: XML-20124: (Fatal Error) An attribute cannot appear more than once in the same start tag."
And i delete the particular file from the path and run the page so this time it works fine.
But later after sometime i get the same error but the session number will be changed, then again i need to delete it and run.
What can be the permanent solution for this issue?
Plz let me know any suggetions.
Thanks.Seems like the mdl file is corrupted or was not generated correctly.
Can you try to create the mdl file again and then try the import ?
If it doesn't work then try contacting Oracle Support. -
Why do holidays appear more than once?
Why do holidays appear more than once?
I have the new iPad and iPhone 5
both run on ios 6
I have multiple holiday calendars on both devices
Step 1: delete your gmail account and calendars go away
Step 2: DELETE your icloud account under setting on iphone and select also delete on iphone
Step 3: add Gmail and Calendar by following directions below (you will NOT get multiple google calendars)
Step 4: go back under setting and sign up for icloud again and turn everythin you want on, ON, even Calendar
You are done, no multiple calendars
**I struggled for a week with this issue and researched online and tried other methods such as unchecking default Birthday icloud calendar, hard reset, uncheck holidays in Gmail, on iphone, none of it worked.....what worked were Steps 1-4 above!!!!)
My iphone 5 is perfect now..no 20 of the same holidays in one day!!!
By the way if you want multiple Google calendars to show up do it this way:
First of you are a gmail user, do NOT use the default gmail sync option if you want ALL of your calendars from Google to show up, multiple colors etc); use MS Exchange, server address is m.google.com
Then go to m.google.com/sync to sync your iphone calendar ON YOUR IPHONE BROSWER, you check mark the calendars you want
Presto, your Google calendars -- all of them -- show up -
Messages receive appear more than once in my mailbox
The problem is the messages that i receive appear more than once and it keep doing this.
Its like they were cloning or multiplicand, I have until 8 messages of the same thing and this thing continuous happening.
What can I do?, i all ready try the suggestions in the support area in apple, but this does not works with my problem.
I even think that cold be a virus.
Any suggestions will be very appreciate.
ThnaksPlease, try to provide as much information as possible, instead of as little as possible. What’s the time interval chosen in the Remove copy from server popup menu?
It looks like Mail has lost track of which messages have already been downloaded and is downloading them again, or maybe it’s failing to remove them from the server according to your settings.
Try to remove from the server all the messages that have already been downloaded by clicking the Remove now button -- check for new mail first, just in case there is something amiss and that function doesn’t work as expected.
If Preferences > Accounts > Advanced > Remove now fails to remove the messages from the server, you can try to do so manually using the Account Info window. In order to use that feature, choose Get Info (⌘I) from the Action menu (gear icon) located below the mailboxes list in the main Mail window. -
Why does 1 cd appear more than once on the ipod
Hi
I have a Classic ipod and use Windows 7; I have a couple of items which are appearing more than once on the ipod but only once on the laptopHi rhduff,
Welcome to the Support Communities!
The following article will help you with this.
Follow the instructions to manually sync your iPad, and remove any songs that you don't want.
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12113?viewlocale=en_US
I hope this information helps ....
Have a great day!
- Judy -
Execution Take place more then once ?
<b>Hi,
Here is code which is executed for more then once</b>
<i> Private Sub SBO_Application_ItemEvent(ByVal FormUID As String, ByRef pVal As SAPbouiCOM.ItemEvent, ByRef BubbleEvent As Boolean) Handles SBO_Application.ItemEvent
If pVal.FormTypeEx = "139" Or pVal.FormTypeEx = "133" Or pVal.FormTypeEx = "179" Or _
pVal.FormTypeEx = "142" Or pVal.FormTypeEx = "143" Or pVal.FormTypeEx = "141" Or _
pVal.FormTypeEx = "181" Or pVal.FormTypeEx = "720" Or pVal.FormTypeEx = "721" Or _
pVal.FormTypeEx = "65211" Or pVal.FormTypeEx = "65213" Or pVal.FormTypeEx = "65214" Or _
pVal.FormTypeEx = "170" Or pVal.FormTypeEx = "426" Or pVal.FormTypeEx = "606" Or _
pVal.FormTypeEx = "390" Then
'If pVal.ItemUID = "1" Then
If pVal.ItemUID = 88 Then
If pVal.Before_Action = True Then
'If pVal.EventType = SAPbouiCOM.BoEventTypes.et_ITEM_PRESSED Or pVal.EventType = SAPbouiCOM.BoEventTypes.et_CLICK Then
If pVal.EventType = SAPbouiCOM.BoEventTypes.et_COMBO_SELECT Then
If pVal.FormMode = 3 Then
If CompareString_Numbering() = False Then
SBO_Application.MessageBox(" Access Denied : Wrong Numbering !!! ")
BubbleEvent = False
Exit Sub
Else
BubbleEvent = True
End If
End If
End If
End If
End If
End If</i>
<b> Which line is needed to be added so that this event is called only for once .........
Please Provide me sample code if possible.
Regards ,
Ganesh</b>Hi,
I have just found the same sort of thing after upgrading to patch 9. I have some code that executes on the before_action of a keydown event and now it's firing twice for some reason.
I hope this is resolvable.
David
(Same thing with a click event on one of my forms, it is also firing exactly twice each time now - even though I am checked only the before_action = true.)
Message was edited by: David Wall
Message was edited by: David Wall -
HT1420 how to deauthorise all five more then once a year
how to deauthorise all five more then once a year
You cannot deauthorize all more than once per year.
You can ask Apple for assistance, however, by contacting them via your Account or Support link under Quick Links in iTunes Store. -
Members from same dim appearing more than once in a record
I have a dimension, "Day of the Week", with each day of the week as a member. My source data has a field for each day of the week. If the flight ( this is an airline flight database ) operates on that day of the week, there is a value, otherwise, its null. Is there a way to load this as is, or will I have to have a record for each day of the week that the flight operates? The Admin guide states "No member from the same dimension can appear more than once in a record", which I think answers my question, but I wanted to throw it out there to see if anyone else has a solution.thanks
So, the days of the week are columns in your data source? That is no problem for a load rule. Normally you tag a column with the dimension it maps to in the cube. In this situation, when you reach the first week, you tag the column with the MEMBER in the day of the week dimension that it maps to.If this doesn't make sense, perhaps you could post the field layout of your file and myself (or someone else) could tell you how to map the columns in the load rule.Regards,Jade--------------------------------------Jade ColeSenior Business Intelligence ConsultantClarity [email protected]
-
Can't open .msg files more then once, saved or as an attachment to an email
we use :
microsoft xp & office/outlook 2003
can't open .msg files more then once, saved or as an attachment to an email
If we save an email as a outlook.msg file , we can only open it once, close it,
when trying to open it again it gives an error that it is not possible due to a scurity issue or it is already open.
After closing outlook and starting it again, we can open it once again.
Same when clicking an .msg that is attached to an email, but here we can switch to another email, go back to the one and open it again.
We have installed all updates for both xp and office 2003 also internet explorer 8.0 to test if that would work, normally we have ie7.0.Hi,
1. What is the detail error information, please try to reproduce the issue and then post the detail error information here.
2. Did you save the msg file locally or on a network drive?
3. Please try to check security on the msg file and also check the drive NTFS permission.
4. Copy over the email messages from the affected user machine to a different machine and check if the issue persist.
5. Test if the issue persist after saving a new email on Mailbox to local drives.
6. Copy over the affected email messages from local drive to a PST file and check if these emails can be opened fine.
1) Create a new PST file .
2) Added to user’s Outlook profiles.
3) Launch Outlook .
4) Highlight a folder under this PST.
5) Drag and drop or copy/paste the emails from local drive to Folder highlighted under the PST files.
Besides, please try to remove all the add-ins like Entrust and then test the issue again.
1. Remove add-ins
1) Uncheck all Third-Party Add-ins selected in Outlook , found under Tool\Options\Other\Add-ins managers.
2) Export the registry hive below for backup.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Outlook \Addins
HKEY_CURRENT_USER\SOFTWARE\Microsoft\Office\Outlook \Addins
3) Delete the registry entries under the above path for all Third-Party Add-ins.
4) Close , Open Outlook and attempt to open email message on local drives.
2. Temporarily stop all third-party application running following the steps
below.
1) Run MSCONFIG
2) Go to Services Tab\Select Hide all Microsoft Services check box.
3) Click Disable All.
4) Restart the Machine Test if the issue persist.
5) To revert back the above setting Run MSCONFIG, Go to General Tab , Select Normal
Startup and restarted the machine.
Regards,
Xiu
1 Translated from dutch as good as i know :
"Can't open : c:\test.msg, it might not exist, do you have the required permission to open the file or is it open in another application. Click
with the right mousebutton on the map click properties to view/check the rights for that map."
2 tried both, the network and locally, i have the rights to save it in the map and open it once, so thats not the problem, iseems that outlook locks the file after it is openen once.
3 security and ntfs permissions are ok, see 2
4 tried it from different pc's networks maps etc.
5 done.
6 in a pst file the msg can be openen ore than once, but thats not the problem, tried and this works, but i need to save an email as an .msg file.
7 addins removed and doen all of that part, didn't help.
We also have tried:
-Installing all updates and ie8
-going back to xp sp2 (fresh install of xp)
Only thing that did work was an msg file attached to an email, we couldn't open that more then once,
but after checking "Use exchange modus with cache" at the account properties we could open that more than once.
Now we need to be able to open the email's saved as .msg more then 1 time. -
LSMW error: Field name '' used more than once in file"
Hi,
I am doing a sample vendor master load with LSMW but while reading data I am getting an error
"Field name '' used more than once in file
'C:\Users\sdurgia\Desktop\LSMW\MM\vendor_master_te
s'."
Not getting proper reason.Can you please guide?
Urgent please help.
BR
SumeetHi,
FYI.
LIFNR
BUKRS
EKORG
KTOKK
NAME1
NAME2
SORT1
SORT2
STREET
HOUSE_NUM1
STR_SUPPL1
STR_SUPPL2
CITY2
CITY1
REGION
POST_CODE1
LAND1
TAXJURCODE
PFACH
PSTL2
REMARK
TEL_NUMBER
TEL_EXTENS
MOB_NUMBER
FAX_NUMBER
FAX_EXTENS
SMTP_ADDR
DEFLT_COMM
KUNNR
VBUND
KONZS
BEGRU
STCD1
STCD2
STCD3
STCD4
SCACD
SFRGR
DLGRP
BANKS
BANKL
BANKN
KOINH
BKONT
LNRZA
XZEMP
AKONT
ZUAWA
FDGRV
BEGRU1
QSSKZ
QSZNR
QSZDT
ALKTN
ZTERM
TOGRU
REPRF
KULTG
ZWELS
ZAHLS
LNRZB
HBKID
TOGRR
EIKTO
WAERS
ZTERM1
INCO1
INCO2
EIKTO1
WEBRE
XERSY
XERSR
VSBED
NAMEK
J_1IPANO
QLAND
LFBW-QSREC
XVERR
FYTYP
STCDT
BKREF
4000048674
2550
M004
DHL EXPRESS (USA) INC
PAY
4000069273
PO BOX 4723
HOUSTON
TX
US
77210-4723
CONTAC: IRMA MURILLO
800-225-5345
281-874-0678
[email protected]
94-3380425
US
11000536
999999
ACCOUNT HOLDER
221300
1
AP VEND
Z011
X
T
B
USD
Z011 -
'PortfolioBacklogs' cannot appear more than once if content model type is "all"
I'm trying to add another level above feature and have followed these instructions https://msdn.microsoft.com/en-us/library/dn217880.aspx
The project is setup as scrum not agile, maybe that is why???, but I get the following error:
'PortfolioBacklogs' cannot appear more than once if content model type is "all"
and haven't been able to find where to change the content model type.Hi Dckennedy1,
Thanks for your post.
What’s the version of your TFS? TFS 2013 Update 4? Your current team project created using default Scrum 2013.4 process template? After which step you received this error? You can share your error screenshot(s) here.
I created a new Scrum 2013.4 template team project in my TFS 2013 Update 4 Server, and followed the steps in that document to add Initiatives work item type in my TFS Web Access, the Initiatives work item type be added into portfolios successfully, you can
refer to the below screenshot:
The only difference with steps in that document is I edited the PortfolioBacklogs section as below in my ProcessConfiguration.xml file.
<PortfolioBacklog category="MyCompany.InitiativeCategory" pluralName="Initiatives" singularName="Initiative">
<States>
<State value="New" type="Proposed" />
<State value="In Progress" type="InProgress" />
<State value="Removed" type="InProgress" />
<State value="Done" type="Complete" />
</States>
<Columns>
<Column refname="System.WorkItemType" width="100" />
<Column refname="System.Title" width="400" />
<Column refname="System.State" width="100" />
<Column refname="Microsoft.VSTS.Common.BusinessValue" width="50" />
<Column refname="Microsoft.VSTS.Scheduling.TargetDate" width="100" />
<Column refname="System.Tags" width="200" />
</Columns>
<AddPanel>
<Fields>
<Field refname="System.Title" />
</Fields>
</AddPanel>
</PortfolioBacklog>
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Ld: warning: option -z[defs|nodefs] appears more than once
Wondering, why I get this warning, as soon as I try to link with -xipo. E.g:
cc -zdefs -Bdirect -m64 -L/export/scratch/elkner/build/root4build/usr/lib/amd64 -L/usr/sfw/lib/amd64 -xipo -xO4 -G -h libgif.so.4 -o .libs/libgif.so.4.1.6 .libs/dev2gif.o .libs/dgif_lib.o .libs/egif_lib.o .libs/gif_err.o .libs/gif_font.o .libs/gif_hash.o .libs/gifalloc.o .libs/qprintf.o .libs/quantize.o -lX11
ld: warning: option -zdefs appears more than once, first setting taken
Actually I can't see a second -zdef|-znodef and -## doesn't show a 2nd one either.
So is this a compiler bug?
Regards,
jel.Version is SS with latest patches applied:
cc: Sun C 5.10 SunOS_i386 Patch 142363-03 2009/12/03
Strange - for some unknown reasons, ipo seems to add -znodefs -zmuldefs :
cc -xstrconst -fsimple=1 -xlibmil -xlibmopt -m64 -xarch=sse3 -xdepend -xO4 -I/export/scratch/elkner/build/root4build/usr/include -I/usr/sfw/include -xipo -xvector=simd "-#" -zdefs -Bdirect -o gif2epsn gif2epsn.o ../lib/.libs/libgif.so ../lib/libgetarg.a
### cc: Note: NLSPATH = /usr/share/locale/%L/LC_MESSAGES/%N.cat:/usr/share/locale/%L/LC_MESSAGES/%N.cat:/local/apps/sunstudio12.1/prod/bin/../lib/locale/%L/LC_MESSAGES/%N.cat:/local/apps/sunstudio12.1/prod/bin/../../lib/locale/%L/LC_MESSAGES/%N.cat
### command line files and options (expanded):
### -xstrconst -fsimple=1 -xlibmil -xlibmopt -xarch=sse3 -xdepend=yes -xO4 -I/export/scratch/elkner/build/root4build/usr/include -I/usr/sfw/include -xipo=1 -xvector=simd -# -zdefs -Bdirect -ogif2epsn gif2epsn.o ../lib/.libs/libgif.so ../lib/libgetarg.a
/local/apps/sunstudio12.1/prod/bin/ipo -phase2 -# -level=1 -ir2hfpath /local/apps/sunstudio12.1/prod/bin/ir2hf -ubepath /local/apps/sunstudio12.1/prod/bin/ube -fbepath /local/apps/sunstudio12.1/prod/bin/fbe -iroptpath /local/apps/sunstudio12.1/prod/bin/iropt -ipo_ldarg_start /usr/ccs/bin/ld /local/apps/sunstudio12.1/prod/lib/amd64/crti.o /local/apps/sunstudio12.1/prod/lib/amd64/crt1x.o /local/apps/sunstudio12.1/prod/lib/amd64/values-xa.o -zdefs -Bdirect gif2epsn.o ../lib/.libs/libgif.so ../lib/libgetarg.a -o gif2epsn -Y "P,/local/apps/sunstudio12.1/prod/lib/amd64:/usr/ccs/lib/amd64:/lib/64:/usr/lib/64" -Qy -lmopt -lc /local/apps/sunstudio12.1/prod/lib/amd64/crtn.o -ipo_ldarg_end
/usr/ccs/bin/ld /local/apps/sunstudio12.1/prod/lib/amd64/crti.o /local/apps/sunstudio12.1/prod/lib/amd64/crt1x.o /local/apps/sunstudio12.1/prod/lib/amd64/values-xa.o -zdefs -Bdirect gif2epsn.o ../lib/.libs/libgif.so ../lib/libgetarg.a -Y "P,/local/apps/sunstudio12.1/prod/lib/amd64:/usr/ccs/lib/amd64:/lib/64:/usr/lib/64" -Qy -lmopt -lc /local/apps/sunstudio12.1/prod/lib/amd64/crtn.o -o /dev/null -znodefs -zmuldefs
### Note: __IPO_LD_FILE_=/tmp/ipo_fAAAErayNZ
### Note: SGS_SUPPORT_32=/local/apps/sunstudio12.1/prod/bin/../lib/ipo/ipo_ld_support.so
### Note: SGS_SUPPORT_64=/local/apps/sunstudio12.1/prod/bin/../lib/ipo/amd64/ipo_ld_support.so
ld: warning: option -z[defs|nodefs] appears more than once, first setting taken
### ---- Invoking iropt for all files
/local/apps/sunstudio12.1/prod/bin/iropt -xipo=1 -F -od /tmp/ipo_dBAAFrayNZ /tmp/old_iCAAGrayNZ -o /tmp/ipo_iGAAKrayNZ -is /tmp/ipo_aFAAJrayNZ -a /export/scratch/elkner/build/giflib-4.1.6/util/gif2epsn.o -Qy -O4 -fstore -xarch=sse3 -m64 -xchip=generic -xcache=generic -fsimple=1 \
-fstore -depend -xbuiltin=%none -xlibmopt -xprefetch=auto,explicit -xprefetch_level=1 -xprefetch_auto_type=%none -xvector=simd -F
rm /tmp/ipo_fAAAErayNZ
rm /tmp/namelEAAIrayNZ
....So probably anannoying bug? -
IPod displaying the same artisit more then once in the artist view
When I sync my library to my ipod, my ipod displays copies of the same artist. Right now it is 3 copies and I was wondering a way to fix it.
I have purchased the songs in question from the itunes store. and the artists that are repeated have the same albums and songs listed under them... Im refering to the "artist" sort mode on the ipod
I know this isnt a tech forum per say.. but this is really annoying me and would like to know how to fix it..
This is what my ipod displays when I go to sort by artisit
Coldplay
Daughtry
Daughtry
Daughtry
Disturbed
Im sure you see the problem and yeah... appreciate the help if someone can help me.
Also the 2 artists that are doing this are daughtry and our lady peace... both of whom I purchased the music from the itunes storeSelect all the songs in the iTunes library by the same artist (all at the same time). While all are highlighted do a Get Info. Is the Artist field blank? If so that means there is an actual difference between two or more of the selected tracks for that field. Mispellings, added space characters, accent marks on some by not the others, etc. Simple solution is to now type in the artist name (to be applies to all the songs equally), OK out of there and see if the iPod looks right after re-syncing.
Patrick -
Artist appear more than once on my ipod
When i search through my music using artist as the criteria, one artist lists several times. i.e. Alicia Keys, i noticed that this was because not all her song was in the same folder so i fixed this in itunes. and synchronized the ipod. there is still two folders of alicia keys. is it possible to arrange the folder directly on the ipod?
Dell Latitude 505 Windows XPTry this and see if it works. Open iTunes and click om Library. Click on the Artist column so the list is sorted alphabetically by artist. Find all of your Alicia Keys tracks and highlight them. Right click and got to Get Info, you'll get a dialog box asking if you want to edit multiple item, choose yes. When th info box opens overtype the artist again with Alicia Keys and click ok. This will guarantee the artist name is identical on all the tracks. After that sync your iPod and hopefully your problem will be sorted.
Maybe you are looking for
-
10gR2 - dimension_key and surrogate identifier
Hi, Both of these, dimension_key and surrogate identifier, end up deployed in the table. I am missing some basic understanding on the difference between these two. It looks that they will have the same values. Specifically, in the dimension editor un
-
Error 11111 submitting + no episodes in feed
Hi, I've been trying for a couple of days to submit my podcast (via Wordpress and feedburner) to iTunes but the store always returns with error 11111. I have read the other threads and tried the workaround via https://buy.itunes.apple.com/WebObjects/
-
Google image search brings up wrong image
when I do a search with google image when an image is selected the image 4 or 5 before is displayed. Does not happen with chrome.
-
Massive deletion of planned orders
Hi everyone, I would be very grateful if someone could tell me how to delete massively planned orders. Thanks and best regards, Ben
-
I am trying to install an update for Java. The system won't allow it, saying I have specified "in Security" not to install any download not from the App Store. The only preferences pane I know of is the one on Safari, and it doesn't have anything abo