Artwork doesn't print when printing cd insert, it shows on the preview but doesn't print?
Hi, after downloading the latest version of Itunes, the artwork no longer prints on the cd insert? It shows on the preview, but doesn't print on the insert? It worked fine before and the printer is working fine, it prints color photos and artwork, no problem?
Since you can see it in your device list it must have Find My Mac activated, but you're going to have to wait for them to take it online in order to either locate, lock or wipe it. Until it goes online you can't do anything. http://www.apple.com/support/icloud/find-my-device/
iCloud: Locate your device
Similar Messages
-
Border lines of windows shows correctly in preview but wrong in printing
Hello experts,
I am currently facing a problem here. When I print preview my sapscript form all
the alignments are correct but when we try to print it the lines of the 3 windows below is
not being displayed. I have 3 windows at the lower part of my page namely MVTXT, LLCOR AND
LRCOR. In preview, they are being displayed as(assume this is the whole page):
KOPF *
MAIN *
Movement type: *
LLCOR | LRCOR *
| *
| *
But when we print it below is the display:
KOPF *
MAIN *
Movement type: *
LLCOR LRCOR *
Again, thank you guys and take care!
Message was edited by: viraylabHI Viray,
Change the size of the window by selecting the Page Windows button inside SE71 transaction under you form and there in the Bottom of the window you get dimensions for each Window you double clicked.
Here in the Bottom you change the dimensions.
Thanks & Regards,
YJR. -
When I print a Word for Mac document to a shared printer (that is connected to my iMac) from my Macbook Pro, print preview looks fine but the printed page has too much blank space at the top and doesn't print the bottom few lines. I have tried to adjust the margins and the page setup settings but to no avail. It used to print fine until recently. Is there a way to fix it so that the printer prints what print preview shows?
I should add that when I e-mail this document to myself and print it directky from the iMac, it prints fine.
-
After upgrading to LION, preview refuses to print out documents to our Ricoh and Canon printers. All other apps work fine with no problems.
Does anyone have similar experience or an answer to resolving this problems.I had the same problem when attempting to print to my Canon ImageCLASS multifunction laser printer. Canon have acknowledged the problem by saying:
"Cannot print from Preview or TextEdit; causes applications to crash. For PDF documents, Canon recommends that the free version of Acrobat Reader is used."
They go on to say:
"An updated driver for each model will be released as a permanent solution. The driver will be an official driver to support Mac OS X 10.7. The target release schedule is approximately three months after Lion is officially released."
Source:
http://www.canon.com.au/en-au/Support-Services/Support-News/Lion-Support
I've followed their advice and have been using Adobe Reader for viewing and printing PDFs. I'll revert back to the Preview app once the updated drivers become available. -
When downloading a pdf, the print command show a document in the preview but only prints blank pages
When downloading a pdf and using the print command, it shows the correct document in the preview but only prints blank pages. If I use the save command and try to open with Acrobat 11.0.07, it says it wasn't correctly decoded and can't open it. If I do the same thing on my old Macbook (10.6.8) all works fine from the same website with the same document. Any ideas?
DThis article maybe help to you, change pdf file type to other application like adobe reader, See:
* https://support.mozilla.com/en-US/kb/Managing%20file%20types -
I am trying to use the locate my macbook that was stolen. How do I know if it is set up on the service. It shows on the list but just says it is offline and doesn't say when or where it last was. I am trying to either locate it or erase it. HELP
Since you can see it in your device list it must have Find My Mac activated, but you're going to have to wait for them to take it online in order to either locate, lock or wipe it. Until it goes online you can't do anything. http://www.apple.com/support/icloud/find-my-device/
iCloud: Locate your device -
I have photos on a cd which I'm trying to open . If I click on them I can see the picture in the preview, but when I double click it doesn't recognise the picture. They are all in .jpg format. Tried copying them but it said some data cannot be read. The files exist but I just can't seem to view them
Select one and hit the Space bar to view it in QuickLook. Use the forward arrow keys to move from file to file. If the file can't be viewed in the QuickLook mode then the file is damaged and probably can't be copied or moved.
You could try a photo file recovery application like MediaRECOVER which can scan the memory card and tell you what files, if any, can be recovered before you have to purchase it.
OT -
They sent me a serial number for a windows version of PS Elements when I ordered a mac version. The serial number doesn't work, not surprisingly, but they don' t seem to care. I have tried the chat line and have waited for almost a day with no response. What should I do?
Look here
Order product | Platform, language swap -
I am unable to connect to the itunes store; I get the message 'Itunes could not be connected to the itunes store. An unknown error occured (-3212). Also when I plug my iphone in to the computer it doesn't ever pick it up please help!!
same here no solutions
-
downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with them and then called Apple support and worked with them for 3 hours. No one can figure it out. Is there something wrong with this version? the pdf was created in 2004. Do I have to pay to get Acrobat?
Let me give you a slightly different perspective than everyone else here. You are using an unsecured wireless network, which means that all your network traffic is easily available for viewing by anyone else using that network. That's bad. Very bad, for you, unless you absolutely trust everyone who lives within range of this network. So stop doing it.
As to the Mac not connecting, wireless networking is simply too complex for any reasonable answer without more information. There are many possible error points, and as often as not it's the Mac that can connect and the Windows PC that cannot. Since you can't give us any information about the configuration of the neighbor's network, and can't make any changes to it, we can't do much to help you troubleshoot it. -
I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What do I do?
I also got Motion and can't figure out how to use it with Final Cut Pro X. Any help woud be great. ThanksI have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue. -
Standard text displayed correctly in print preview but not in print
Hi,
I have a script in which a standard text has to be printed in the output.
The standard text contains some german characters.
These characters are displayed correctly in print preview but not in print.
The text is maintained in 3 languages DE,EN and Russian.
The same text is being printed in some standard report. But that is displayed correctly both in print and print preview.
Please suggest something.
Regards,
Richa AggarwalHi Richa,
Check this document from SAP: [help doc|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0652a95-5f0b-2a10-5aba-c085f8bbe6d6?QuickLink=index&overridelayout=true]
It indicates that you have to be sure to select "Unicode" fonts for your SAPScript form to ensure the proper printing of "Unicode" characters. If a character does not display then that means it does not exist in the font that you are using.
Regards,
Ryan Crosby -
Adobe Reader 11.0.07 defaults to duplex printing. Is there a way to set the default to leave that "print to both sides of the page" box unchecked?
I am working on an end-user's computer, I just updated to the newest Adobe Reader and they don't ever print duplex. I want to be able to have the "print to both sides" box unchecked on the print dialog by default. Is there a way to do this? I have the printer settings all set to 1-sided but it is adobe print dialog settings that keep messing it up.
Thanks!Hi John,
Have you tried repairing Reader and checked?
Does this issue occur only on this machine or are you facing the issue with other computers as well which have updated to Reader 11.0.10?
Regards,
Anoop -
after i update the 10.10.2 OS X Yosemite my iPhoto stops working. In the warning that appears when I try to open the app says that happened a mistake because of this update. I reinstalled the app but doesn't work anyway. Please, HELP!
I already tried that but it doesn't work. Appears a warning saying: "See the developer to make sure that iPhoto works with this version of OS X. You may need to reinstall the application. Be sure to install all available updates in the application and OS X."
-
I have some apps on my ipad and I want to install more ,but it doesn't show the apps on the home and when I try to open them from the AppStore it doesn't work , what should I do?
Are you not seeing the icon of the app you just downloaded (it happens sometimes, and the quick fix is to reset your iPad)? Or are you running out of space on your iPad?
Maybe you are looking for
-
My iPod classic will no longer connect to my iTunes
and error message then appeared stating there was a problem and i would need to pardon the disk (iPod) or maybe get a new device . note: the iPod is not that old bought maybe a yr and half ago . i did a little research and learned that pardoning the
-
I have a dv7-1157cl that when you plug it in the light next to the ac port lights up. However the charging battery light does not light up and when you try to turn it on it does not power. I have tried turning it on with just the battery in and unplu
-
Help understanding panic report
Hello, I have a straight forward question. A person is trying to render in Adobe Aftereffects and it has a kernel panic. Below is the report. Can someone help me understand it? Thanks. Interval Since Last Panic Report: 30319302 sec Panics Since
-
WDPortalNavigation with portal not running on WD server
Hello, I am trying to get my application to close itself and replace itself with a non-WebDynpro iView. I have been attempting to use: WDPortalNavigation.navigateAbsolute("ROLES://portal_content/contentlib/corporate/mss/iviews/test_iview",
-
Array Running Error NullPointerException
I m trying to create a class that will have an overload constructor which will passing a parameter of an Object array..... public class Standings private Team [] footBall; /* public Standings() footBall = footBall;