Artwork for "Massive Attack - Heligoland" could not be found.

I tried, but I could not add artwork for the Heligoland album by Massive Attack. I think there's something wrong with the iTunes artwork database. This album is available on iTunes Store. Did anyone successfully add this album's artwork? Please help.

I bought the album from iTunes and that worked fine. Check to make sure that the title you have is character for character the same as iTunes lists it. If it's different at all, iTunes won't find it.
You can always copy the artwork from some other source (I like Amazon) and paste it in yourself.

Similar Messages

MIGO-Sales price for material (NL1S ROH1 ) could not be found

Hi Experts
When i doing MIGO , i am getting following Error Message .i.e.,
*Sales price for material (NL1S ROH1 ) could not be found*Message no. M7158
Diagnosis
The sales price valuation is active in the valuation area.
The system could not determine a sales price on the specified posting date for material NL1S ROH1 in unit of entry in plant .
Sales price conditions may not be defined for the material in plant .
Procedure
u2022 If you have a goods receipt for a purchase order or an order, the sales price is taken from the purchase order or the order concerned.
Check the sales price in the purchase order or the order.
u2022 if you have goods movements without a reference, you can specify the sales value (sales price including sales tax) manually.
If the screen does not have the field Sales price, then you have a Customizing error: the sales price valuation was activated in the valuation area, but the field selection of the movement type was not changed accordingly. In this case, contact your system administrator.
u2022 Check the definition of the sales price.
Note that for distribution centers, the sales price of the consumer distribution chain maintained in the distribution center's master data is used.
Proceed
If you post this movement without the sales value, the movement will be valuated with value zero. This can change the average sales price.
Please Advice us ...
Thanks in advance
Regards
Rajesh .P

Hello,
Please check the following:
-check with SE16 at table T001K whether you have sales pricing active for your valuation area,does your material belong to a very special material type
-Check SAP Note 84480 ,109881
-No sales price exists, no goods movements can be posted for an article subject to value-based inventory management. You must maintain the sales price in all cases.
Please refer the link below:
http://help.sap.com/erp2005_ehp_04/helpdata/en/12/085e95470311d1894a0000e8323352/frameset.htm
hope the information is helpful
regards

Less destructive fix for the "original file could not be found" issue

+(Note: this is mostly a copy of the post I just submitted in reply to http://discussions.apple.com/message.jspa?messageID=6785594#6785594)+
Most solutions to the "The song xxx could not be used because the original file could not be found. Would you like to locate it?" issue involve deleting iTunes library files, deleting-then-re-importing everything from iTunes, and other destructive techniques. I found an easier fix for this, but it might be (a) specific to libraries on a network drive (NAS) or (b) specific to me. YMMV, but give it a try. This was on a Mac, so a Windows solution might exist with the same technique. Please post here and let me know if this works for you!
After some investigating and trial-and-error, I discovered that if I viewed a list of songs in Finder, iTunes could find the files again. For example:
*Double click on a song in iTunes and get the "original file could not be found..." error. Do not say 'Yes' to locating it.
*Open Finder and locate that Folder of songs
*Double-click on another song from that album. It should work.
So, my fix: *run a command that lists/touches every file in your iTunes music folder.*
For Macs:
*Open Terminal
*Run this: *ls -R /Path/To/Your/iTunes\ Music \Folder/* (note how you 'escape' spaces in the folder name with back-slashes).
Windows:
*Start - Run - cmd
*Run this: dir /s \Path\To\Your\"iTunes Music Folder" (note that you escape spaces by quoting the dir name.)
My NAS is named "VAULT" so my command was "ls -R /Volumes/VAULT/My\ Music/" You will see the files being listed at light speed -- ignore this. It will run for a while, depending on how many files you have, about 30 seconds for me. After executing this I could listen to any music file in iTunes!
But, every time I lost my connection to my NAS, such as waking from sleep mode, I had to run it again. So I created an Automator application and a Apple Script to run it from within iTunes so I can run it any time I need to. If you don't want to do that, just run the command I specified. If you want to download my Automator app, or see instructions on how to create your own, check out my blog post: http://40withegg.com/2008/3/8/mac-attack-making-itunes-find-those-original-files -especially-on-a-nas
With any luck, my post will be *completely unnecessary* soon because Apple will find a real solution to this.

Jeffe hello,
I have seen more problems created by the consolidate command than I have ever seen fix things... I'm not saying it does not work but what it does do and what it does not is very hard to work out for most and major problems are the result...
to sort your problem do this...
1. Open your iTunes folder in the Home Music folder and make a backup copy of the iTunes Library file and put on the desktop.
2. Start iTunes and in the Library sort on the Heading 'Date added' ... you may need to install it... control/click on heading-bar and select from popup menu.
3. When you have sorted scroll to half way and you will see the songs are split evenly... select the ones you want to remove with a shift/click and hit delete key... say no about move to trash for now.
4. Check that everything is as you want it... if so carry on... if not come back and tell me what happened.
5. Quit iTunes and put the iTunes Library file in the iTunes folder in a safe place like your Documents folder... drag the copy from desktop and put it in the iTunes folder.
6. Check the name is correct on the 'copy' edit it to be iTunes Library.
7. Start iTunes by double/clicking on the file and go through steps 2 & 3 again but this time when you delete say yes about move to trash... don't empty it yet 1st check that all is OK with your library.
You can edit the good files that you are left with but the addition of '01' in the name will not have any adverse effect on them at all... editing with an Applescript is very easy.
take care Jeffe and let's know how you get on or if you run into any unforeseen problems ... TP

Why won't Itunes get my album artwork? It just says could not be found when all the info is the same as Itunes.

Out of no where suddenly Itunes refuses to get my album artwork. The info is exactly the same as Itunes but it refuses to get any artwork. I tried signing in and out, then back in. Nothing seems to work! Why won't it get my album artwork?

.wav tracks don't have a tag, so you can't save artwork, or indeed other metadata to them. Use AIFF or Apple Lossless if you want the highest quality, but 256k or 320k mp3 may be just as good depending on the equipment you have and your own hearing.
tt2

MIGO -slaes price for material (NLISROH1) could not be found

Hi Experts
When i doing MIGO , i am getting following Error Message .i.e.,
*Sales price for material (NL1S ROH1 ) could not be found*Message no. M7158
Diagnosis
The sales price valuation is active in the valuation area.
The system could not determine a sales price on the specified posting date for material NL1S ROH1 in unit of entry in plant .
Sales price conditions may not be defined for the material in plant .
Procedure
u2022     If you have a goods receipt for a purchase order or an order, the sales price is taken from the purchase order or the order concerned.
Check the sales price in the purchase order or the order.
u2022     if you have goods movements without a reference, you can specify the sales value (sales price including sales tax) manually.
If the screen does not have the field Sales price, then you have a Customizing error: the sales price valuation was activated in the valuation area, but the field selection of the movement type was not changed accordingly. In this case, contact your system administrator.
u2022     Check the definition of the sales price.
Note that for distribution centers, the sales price of the consumer distribution chain maintained in the distribution center's master data is used.
Proceed
If you post this movement without the sales value, the movement will be valuated with value zero. This can change the average sales price.
Please Advice us ...
Thanks in advance
Regards
Rajesh .P

Hi Experts
Any update on this please ....
Regards
Rajesh.P

FB_4.5:"Source could not be found for flash.sensors.geolocation.." . airglobal.swc

Hi!.
I´ve FB 4.5 for PHP and I´ve add SDK 4.5.1 as said the next link :
http://kb2.adobe.com/cps/906/cpsid_90671.html
On my mobile project I use Geolocation:
When I try to run the mobile project , don’t work.
I´ve note that from FB in Package Explore, select my and I can to see the airglobal.swc library , under: My proyect -> Flex 4.5.1 -> airglobal.swc. This library it look that are linked and I can to see your packets such as: (default package); adobe utils ; avmplus and flash , but when I click on one of them, i.e : airglobal.swc->flash->sensors
and I try to open geolocator.abc , appear a popup ( Code Navigator error) that said:
"Source could not be found for flash.sensors.geolocation in D:\Archivos de programa\Adobe\Adobe Flash Builder 4.5\sdks\4.5.1\frameworks\libs\air\airglobal.swc"
If I go to this path in my HD, it exist and I can see the airglobal.swc and Geolocation.abc files, but it look that FB don’t see L . It could be the problem?.
How I can to resolve?. Any idea?.
Thank you!

Hi, I have a simmilar problem but is for another swc:
Source could not be found for mx.core:IUIComponent in C:\.....sdks\4.0.0\frameworks\libs\flash-integration.swc.
Is that not open source too ? Are all classes not accessible like this not open source ?
Also, I've read about mx_internal varialbes, and some people suggest going through the source code to find them, but when that's not possible what should one do to identify them, debug maybe ?

I am not able to open iPhoto, when I have used the iPhoto Library Manager, I get the message that "the iPhoto Library folder could not be found" Help!

Help! I can't open the iPhoto! I have os x 10.5.8 and I have tried using the iPhoto Library Manager only to find out that the folder for the iPhoto Library could not be found.
I have also tried the Fix #1 from the user Old Toad who said to delete the preference file :com.appleiPhoto.plist - I could do that, but I couldn't figure out how to delete iPhoto's cache fie, Cache.db because I couldn't find it? I'm not sure how to find the file by it's directory path name of HD/User/Home/Library/Caches/com.apple.iPhoto .
Help is very much appreciated!
vernawithav

Download and use Find Any File to search for "Library6.iPhoto". It's a file that is present in every iPhoto library. If you don't find one on your hard drive then your library has gone missing entirely.
Another thing you can try is to use the Search For - All Images feature in the Finder window to see if you can see any of your photos.
That will tell you if they are on your hard drive but somewhere other than the library.
What do you see when you insert the DVD into the optical drive? Can you open it and any folders on the disk? If the disk is titled iPhoto Library then open the disk, the the iPhoto Library folder and finally the Originals folder. Check the subfolders to see if your photos are there.
Your original photo files will be in the Originals subfolders.

Artwork for ..... could not be found. An unknown error occurred (-609).

I've installed both 7.5 and 7.6 and with either version for some reason I can no longer get the album artwork to any of my albums, when trying to get them the following message appears: Artwork for ..... could not be found. An unknown error occurred (-609). Any help how I can get the album artwork for my albums would be very much appreciated.

aley175 wrote:
When all my songs were transfered to iTunes half of my songs have '!' to the left of them in a black circle. Is there anyway to delete them all at once or do I have to go through every second song and hit delete?
Try iTLU - iTunes Library Updater which if set up properly can remove all missing tracks from the library and add all new unlisted tracks from your media folders into the library. Running time seems to grow expoentially with the size of the libray - 34,000 drags, but 5,000 shouldn't be too bad.
tt2

When I "Get Album Artwork", iTunes always returns a result that artwork for one song could not be found; but the song is not in my library.

When I "Get Album Artwork" in iTunes 10.4.0.80 running under Windows 7, iTunes can find the missing artwork requested. But it also returns the same result, "Artwork for "Aught 7 - Mother Chorizo" could not be found. The problem is I do not have the song or any song from Aught 7 in my music library. I'm guessing this is an issue with a corrupted iTunes database. Can someone tell me how to correct this issue?
Thanks in advance.

1. delete this songs from your liblary
2. go File -> Add File to Liblary... (Ctrl+O) or File -> Add Folder to Liblary

Artwork for _________ could not be found

I bought a CD and downloaded it to my itunes but it didnt have the artwork, i got some artwork from the internet but its very pixally when its on my apple tv. and wen i go to advanced and click get album artwork it says Artwok for "Hairspray" could not be found. Is it possible to get an itunes quality artwork or do i hav to settle w the internet pic?

Here is the best site I have found:
http://www.albumartexchange.com/

HT1473 iTunes message saying the song names for this cd could not be found online when it's iTunes store, What's up with that?

I just purchased The Very Best Of Eagles CD, Popped it into my drive so excited to own the copy but when I tired to copy it to my Library I get this message saying the song names for this cd could not be found online when it's in the iTunes store, What's up with that? Is there any way to get track information and artwork without Having to manually inter all the info?

iTunes gets track information from Gracenote's database, so iTunes must be able to reach gracenote.com and the CD must have been entered there by some purchaser already (all CD information in Gracenote is provided by we users). If these are common, commercially-distributed CDs, it may be that there is a firewall or privacy filter blocking access to gracenote.com. If these are unusual, independently-released or rare CDs, they just may not be in Gracenote yet. In the case of a custom CD where it's a compilation, Gracenote probably won't be able to identify them (it goes by complete albums, comparing the number and length of the tracks to try and figure out what album it is).
Hope this helps.

Error -Account 'Down-payments clearing account' could not be found for area

When I am trying to pass a down payment entry by debiting vedor and crediting bank with asset it is giving an error as follows.
Account 'Down-payments clearing account' could not be found for area 01
Message no. AU133
Please help me to rectify the same.
Thanks in advance
Deepak

HI
Please pay attention at the possible causes of message AU133:
1. Error AU133:
   a) You have not defined a contra account for acquisition value postings in the Asset Accounting Customizing settings (Transaction AO90).However, this is required as of Release 4.6C because, as is the case for all other integration postings in Asset Accounting, invoice receipt postings have to be displayed in Asset Accounting via the new posting kernel to ensure an identical document
structure.
   b) You have defined the account in Asset Accounting, however, it is not created in the affected company code.Check whether the account is correct and create it for the company code, if necessary.
2. You have entered an asset reconciliation account for the "Contra account: Acquisition value posting" (for example, the same account as for   "Acquisition:Acquis. and production costs" account).This is not permitted.Check whether your account determination is correct
   (Transaction AO90) in Asset Accounting Customizing. The same applies
   for the 'Contra account: Down payment posting'.
3. As "Contra account: Acquisition value posting" you entered an asset G/L account. If necessary change the automatic posting indicator in the G/L account master record.
4.Check if you need revaluation accounts in depreciation areas involved   (AO90):
-Revaluation acquis. and production costs
-Offsetting account: Revaluation APC
Please run also programm RACKONTO where missing or wrong customizing
the accoutn determinations per company code is displayed
Also have a look at note 7595 in this regard.
Please assign points if it useful.
Regards
Ravinagh Boni

When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box

When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.

When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.

After I updated my iPhone with IOS 6.1 my old Apple ID keeps popping up on my iPhone for me to type in the password that I no longer know. On the Apple site the Manage my Apple ID says my old Apple ID could not be found. How do I get this to stop?

I just updated my iPhone with the newest update IOS 6.1. My old Apple ID keeps popping up on my iPhone for me to type in the password that I no longer know. All the passwords I type in do not work. I no longer have access to this email which is my old Apple ID. After installing the newest software update my old Apple ID came up to finish configuring. Since I no longer have access to this Apple ID and email account and after trying some passwords I skipped the step. It then said FaceTime, iCloud (which I do not use), and more may not work. I clicked that it was OK since I could not remember the password to my old Apple ID. I then went to my settings to be sure my newer email was my Apple ID by typing in my current Apple ID and password. Also, I went to Manage my Apple ID online and my old Apple ID could not be found. Is it OK I skipped that step in the IOS 6.1 configuration? How do I get my old Apple ID to stop popping up?

Blue
It sounds like you restored from an old back-up. Did you back-up just before your software update? It will use your last one and if your last back-up was a ywear old then it will use that one.
In general, if you are getting these messages on your iPhones select logout (when you get that Apple Id request) and then log back in with your newer ID.
Sorry for your losses.
Cheers

I have a new hard drive as my old one crashed. Everything seemed to transfer fine except for my entire iTunes library. It shows all of my old songs, but when I click on one it states "the song could not be used as the original file could not be found

I have a new hard drive as my old one crashed. Everything seemed to transfer fine except for my entire iTunes library. It shows all of my old songs, but when I click on one it states "the song could not be used as the original file could not be found.would you like to locate it".
Either how do I locate it, and I've tried every trick I know, or how do I restore all of my songs from one of two sources. I have my old hard drive backedup on an external drive which should have all of my songs, and I have most of my songs on my old iPhone 3S which I'm using as a backup iPod.

The "missing file" error happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, one of its parent folders, or the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place. In the case of a library moved from one system to another there are also potential permissions issues. See Repair security permissions for iTunes for Windows.
Select a track with an exclamation mark, use Ctrl-I to Get Info, then click No when asked to try to locate the track. (Due to a bug in iTunes 12 you currently have to say No twice!) Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, a folder renamed, or a drive letter has changed, it should be possible to reverse the actions. If the difference between the two paths is an additional Music folder in one path then this is a layout issue. I can explain further if that is the case.
In some cases iTunes may be able to repair itself if you go through the same steps with Get Info but this time click Locate and browse to the lost track. It may then offer to attempt to automatically fix other broken links.
If another application like Windows Media Player has moved/renamed the files then the chances are that subtle differences in naming strategies will make it hard to restore the media to the precise path that iTunes is expecting. In such cases, as long as the missing files can be found somewhere, you should be able to use my FindTracks script to reconnect them to iTunes. See this post for an explanation of how it works.
See also Recover your iTunes library from your iPod or iOS device.
tt2

Artwork for "Massive Attack - Heligoland" could not be found.

Similar Messages

Maybe you are looking for