Artwork on iphone during playback

The artwork has been removed or is the incorrect artowrk during play back on my iphone. Is there anyway to restore them to my phone?

I had that problem once. I removed all the songs from the phone and resynced them back to the phone. The artwork was fine after that. Hope this helps you!

Similar Messages

Video downloaded directly to iPhone stops during playback

I downloaded a video from the iTunes store directly to my iPhone 3Gs. Now during playback, it stops
at a particular point and will not continue playing. Of I try to drag the scrubber forward in the video, it snaps back to the point where it stopped. What could be the problem with this?
Thanks in advance for any assistance,

find the file in iTunes (you may need to sync it if you downloaded directly to the iPhone), then click on it, and then click on "file -> get info" on the menu bar. go to the "options" tab and see if the "end time" is something besides the actual end time of the file. that's the only thing i can think of that would cause this issue.

How can I turn the metronome off during playback on version 2.0.6 (iphone 5)?

The triangle-like icon allows me turn metronome on and off for recording, but I cannot get it to turn off during playback if I use it during recording. The Dial in the upper right allows me to turn off the "Count-In," and change the sound, but no option to turn off during playback. How do I fix this?

The triangle-like icon allows me turn metronome on and off for recording, but I cannot get it to turn off during playback if I use it during recording.
That should not be like this. Even if I enable the metronome during recording,I can turn it off again afterwards, before I start playback.
Have you tried to reset GarageBand? You can do so in the Settings.
Settings > GarageBand, then enable the switch "reset GarageBAnd".

Error occurred during playback on 'Live Now' AFL TV - error during playback....

Subscribed to 2015 NAB, and on all occasions I get an error occurred during playback for AFL.TV.I'm on an HP 10 Plus tablet, Android 4.4.2 over WiFi. All other video playback appears OK.I am able to get very choppy playback on another Android tablet , so it looks like a comparability type of issue, what should I check.

Hi Colin,
What error do you get exactly?
I'd recommend having a look at our FAQs http://www.afl.com.au/livepass/faq
From the look of things, the current version of AFL Live Official App is supported on the following operating systems and devices:
iOS -7.0 and above
iPhones:
iPhone 4S
iPhone 5
iPhone 5C
iPhone 5S
iPhone 6
iPhone 6 plus
iPads:
iPad 3
iPad 4
iPad Air
Android smartphones - 4.0 and above
Galaxy S4 LTE (GT-I9505)
HTC One
Samsung Galaxy S3 LTE (GT-I9305T)
Samsung Galaxy S2 (GT-i9100T)
HTC One XL
Samsung Galaxy S5 (G - 900i)
Samsung Galaxy Note Edge
Samsung Galaxy Note 4
Sony Xperia Z1
Google Nexus 5
HTC Desire 300
Telstra Dave
Android Tablets - 4.1 and above
Samsung Galaxy Tab S
Google Nexus 7
Windows Phone 8 devices running Windows Phone 8 and above
Nokia Lumia 520
Nokia Lumia 625
Nokia Lumia 920/930
Nokia Lumia 1320
Nokia Lumia 1520
Let me know how you go

Zoom in and pan trough video during playback?

Hi,
is it possible to zoom in and pan trough video files during playback on iphone 3gs? I know that there is a zoom inside accessibility inside settings but is it possible to use that during video playback? Sometimes during playback I need to enlarge some parts of video in a way to read numeric settings or something similar.
Thanks

I is it possible to zoom in and pan trough video files during playback on iphone 3GS?
Yes.
I know that there is a zoom inside accessibility inside settings but is it possible to use that during video playback?
Yes. Three-fingered double-click to turn it on or off. Three-fingered drag to move the zoomed image.
Sometimes during playback I need to enlarge some parts of video in a way to read numeric settings or something similar.
The video will have been compressed for use on the iPhone, so zoom may help, but it won't be able to show detail that was lost in the compression.

Wrong song order during playback

I have an issue that the song order during playback is in accordance to the song number.
Random playback is switched off.
I delete all my music from iPhone 4s, I just synced a signle album for easier verification,
but the issue stays same.
Thanks for any help.
Br Hans

Leave the tracks on your system. If they are part of a playlist, first remove only the playlist. Go to My Library, find the artist/album/tracks. Select all of them and create a new playlist from selection under File. Resync.

Ipod Was Skipping/Glitching During Playback, Now Has No Files

I've had my 120 gig ipod Classic since 2008, and recently it began skipping/glitching during playback of just about every song. I made sure I had the latest version of iTunes and also defragmented the ipod, neither of which fixed the problem. I came to the Apple forums for a solution, and discovered this thread while searching:
http://discussions.apple.com/thread.jspa?threadID=2400544&tstart=135
I did what was instructed in the solution, only for the ipod to display that there are no music files upon rebooting. So now my ipod appears to have been wiped clean despite doing exactly what worked for someone else with the same problem. Am I pretty much out of luck as far as restoring my ipod? (I haven't had it synced to an itunes account since my computer crashed, so most of the files were in no way backed up) Also, does anyone have a legitimate solution to the skipping problem, for future reference?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Footage jumps in Final Cut X and Quicktime during playback

I did a simple SLOW pan shot with my Canon C100 with the media being recorded on to the Ninja 2. I transfer the media from the Ninja 2 on to an External Thunderbolt Hard Drive. When I play back the footage it jumps around. I also tried the clip in the Apple store and got the same result.
When I play the clip on my friends PC it plays smoothly.
I'm shooting Pro Res 422, 10 Bit rate, using a Mac Book Pro, OS 10.9.5, Final Cut X 10.1.3 and I have 16 gigs of ram.
Why is the footage jumpy?

Greetings Vibrant
I was thinking that your problem may lay in the SD card being not quick enough to capture the camera's 10 bit HD vision and was dropping frames etc but, you mentioned you are recoding onto an external Ninja 2 so surely that must be quick enough to record the output of the camera you would think.
I'm tending to think that your MacBook Pro, in particular it's graphics card, is not up to the task of playing back 10 bit full HD content.
Your best bet to decipher if it's the Ninja 2 thats the problem (dropping frames during capture) or the MacBook Pro during playback would be to export/convert the vision into H.264 or something smaller in size and bitrate and then play that back on the MacBook, another Mac, iPad, iPhone etc. If it's smooth, then the MacBook would be the problem. If it's still jumpy, then the problem could lay with the output to the Ninja, or the Ninja itself.
Have you tried playing back the vision from in-camera/Ninja connected directly to a HD TV ??
I've been having a **** of time these past few weeks with my newly acquired Blackmagic Pocket Cinema Camera with jumpy vision. Tried all of the above, sending the vision in it's native form and also numerous varying conversions, from my 27" Quad-Core iMac to my MacBook Pro, iPad Air, iPhone 5, to my TiVo's and even last night burnt onto a DVD to playback in my Blu-Ray player in the theatre room. All to no avail. I've purchased a second expensive SanDisk Extreme Pro 95MB/s card thinking the first card was a fake or something, and the new card has made no difference either.
I even completely formatted and clean installed OSx Mavericks on my MacBook Pro just to double check, but it's still choppy.
The vision even plays back choppy in the BMPCC through HDMI to a HD television but not as bad to be honest, so i'm now, after all this testing, consigned to think the camera is kaput, as the vision looks more like a huge vertical sync problem on my camera, as opposed to simple dropped frames as this camera is prone to with not so good/unsupported SD cards.
Hope that helps you a little in running tests to find where the problem lies with your vision.
P.S. I read recently during my last two weeks of wasting far too much time troubleshooting my own problem that it's best to NOT have journaling enabled on your external disk(s) that you use to capture and edit with in FCPX. Apparently Journaling slows down the read/write of the drive potentially causing stuttering to high bit-rate HD video. I'm about to disable journaling on my FCPX disk and test the outcome shortly.
Although, you are running Thunderbolt disk so you wouldn't think such a fast medium would be affected by such a thing. But, stranger things have happened .
Regards
Paul

Movies & Episodes stopping during playback

Has anyone else have any issues with the iPhone during video playback? I got the free version of the new Terminator series and downloaded Transformers toady. During playback of Terminator (20 minutes) it cut out to the file selection screen. During playback of Transformers it cut out again halfway through the movie. {post edited by moderator}.
Does anyone have any insight as to stop this from happening?

How much free storage space do you have available on your iPhone?
I have never experienced the same.
Standard troubleshooting procedures in order are power the iPhone off/on, Reset by pressing and holding the Home key and Sleep/Wake or On/Off key simultaneously until you see the Apple logo and then release - ignoring the slide to turn off prompt when doing so which doesn't affect and data or settings, Restore and if no change after any and all, give AppleCare a call (800) 694-7466 or make an appointment at a local Apple Store to have this checked if there is one nearby.

Why do I keep getting a "system overload" message during playback?

Why do I keep getting a "system overload" message during playback? Even when I have only a few tracks playing together, I keep overloading and it stops the playback.

Purchasing iCloud storage will not help your issue. Also, if you want to upgrade, do it via iTunes rather than OTA - it doesn't require as much available storage to do it that way.
To check to see what is taking up so much of your storage, go to Settings>General>Usage>Manage Storage, and you will see a list of the items on your device and the amount of storage they are taking up.
T-mobile's offer of the 64GB iPhone 6 to new or additional line customers has nothing to do with Apple. You need to take that up with T-mobile.
Cheers,
GB

Audio dropping out during playback in timeline

Hey everyone,
I've dug through these forums and unless I just completely overlooked it I have not found a solution to this issue. I've listed my setup below and then have stated the issue I'm experiencing.
27-inch, Mid 2011 iMac
3.4 GHz Intel Core i7
16GB 1333 MHz DDR3
AMD Radeon HD 6970 1024MB
Running Mac OS X Lion 10.7.5 (11G63)
Currently working off of a portable 1TB G-Technology G-DRIVE via FW800.
Working in Premiere Pro CS6 Version 6.0.2
Editing in a sequence with settings:
1920 x 1080 23.976fps (also tried in a 29.97fps timeline with same issue)
Working with footage that is 23.98fps
Working with a combination of ProRes 422 (LT) and native H.264 Quicktime files strait from a 5D Mark 3.
The issue I'm having is during playback the audio will competely drop out. The video will continue playing on just fine but the audio drops completely out. All audio levels drop as well in the audio mixer meters so it truly is losing all communication with my audio layers in the timeline.
I read in other forums to go into Finder and delete out the .caf files, re open Premiere Pro, wait for them to be recreated then carry on. I tried this approach with no luck. Deleting the .caf did not change anything. Audio is still dropping out as I try to play through my timeline. The only way to get the audio back is to pause then press play again. I have 5 total channels of audio with only 2 of those channel active.
Any ideas on what is happening would be greatly appreciated. This is incredibly frustrating have to export out a video just to be able to watch it through.

Having this annoying problem also. Using the Space Bar to play timeline it takes pressing and holding to a count of three or trying press play three time in a row using the space bar to get ungarbled audio, or any audio at all in a normal uncomplicated sequence on the timeline.
Really annoying. Audio used to be so simple and untaxing to a sequence.
Adobe Premiere Pro CC 2014.1 release
8.1.0(81) Build
OSX 10.8.4
40 GB RAM
G Raid G Speed Q w/ ESATA connection
1920x1080 29.97 Progressive Scan Sequence
48Khz
Apple PRoRes 422
12 channels of audio/ only 2 of 12 monitored.
1/2 resolution on Program monitor
ADOBE.....WISH THERE WAS A SOLUTION?

IPod Nano 4G Skips During Playback with Apple Lossless Songs

My iPod Nano 4th Generation has been consistently skipping a brief portion of music about every 5th Apple Lossless song during playback. I've been working unsuccessfully to resolve this issue with tech support and fixed the problem when I disabled the energy level setting in the playback menu. While this is a hit to battery life, the skipping no longer occurs. Hoping that this issue is permanently resolved in an upcoming software update.

Hi,
I brought my ipod yesterday and had the exact same issue. it would skip certain songs frequently and was extremely frustrating. Im not sure if this is the case for all ipods (i have an ipod nano 16Gb 4th gen, with firmware 1.0.4), but i fixed my issue in a series of steps. Im not sure which exact part of my method did the job, but here it is:
1. plugged it into iTunes and clicked "restore" under the tab "summary". WARNING: This will delete everything, and restore factory settings. im not sure if this is necessary, but youll need to delete the songs which skip anyway.
2. pressed the eject button IN ITUNES (under "devices", and next to your ipod icon), ejecting the ipod. wait for the ipod to specify when it is ready for it to be unplugged. proceed to unplug said ipod.
3. Choose the language of your ipod, and go into playback settings and (settings/playback or something) and turn OFF "shake" and "energy saver"
4. Plug your ipod into your computer again and drag all the songs onto your ipod using itunes.
5. after it has finished copying, WAIT until the ipod no longer says "synching", and until it says "connected"
6. Press the eject button IN ITUNES (again, under devices, and next to your ipod icon)
7. Eject when the ipod says it is ok to do so.
As i said, im not sure which part of the method did it for me, but i think it might be the way in which i was ejecting it. Before i was ejecting the ipod on my desktop. I think it is important to eject it using itunes. Anyway this fixed my ipod. Im not sure if it will do the same to yours, but if its making you very angry (to say the least) like it made me, its worth a try i guess. I would appreciate it if people let me know if this works.

My apple tv stalls during playback. How can I fix this?

My Apple TV stalls during playback. I am hooked up through ethernet so I'm certain that it is not a network issue. What happens is that after a few minutes of normal playback the movie that I'm watching simply stalls. It looks like AppleTV is trying to reboot it. if I rewind it briefly and restart the movie by pushing play it seems to be fine. But it it stalls again after a few minutes. I have to do this very often and it becomes quite distracting when you're trying to watch a show.
One thing I have noticed is that if I pause the program before it stalls and leave it for about 15 minutes I can watch a large portion of the show uninterrupted.
The files are in my iTunes library. I don't seem to have this issue if I'm playing the files from my iPad via AirPlay. I have restarted, reset, and rebooted AppleTV several times and it still keeps doing it. Any suggestions out there?

640 x 480
Widescreen 16:9
These settings are contradictory. Please post a screen capture image of the QT "Inspector" window to confirm what encode matrix setting, PAR display setting, and Scale display settings are actually embedded in your file. Also please confirm whether or not the source material was widescreen and it is 4:3 aspect you wish to correct at this point. If not, then please state the height at which the transcoded file was encoded and the target aspect ratio at which you want files to play in all media players.
Once compressed it plays back in Windows Media Player as 16:9 video.
When played back with Quicktime it is squished into a 4:3 format.
Different players dispay content aspect differently.
Why is this happening and how can I fix it?
QT 7, for instance, displays the file using specific Scale dimensions and if these dimensions are not equivalent to PAR/anamorphic playback settings, then the file can display differently in differently media players. As to fixing the problem, that depends on which setting you are trying to fix and what platform/software is available.

Multi-room DVR Issues: Unable to locate hub, interrupted recording, skipping during playback

Hi Guys,
I was wonderng if you could help me. I have been a FIOS customer for many years and have a multi-room HD DVR and 2 HD set-top boxes. I have always had some problems during playback on some recordings where the picture and sound will skip, but over the last several months some new problems have appeared. Frequently during playback of recorded shows the recording will stop playing and I will get a message on the screen "unable to locate hub". I then have to power off the STB, reboot and when I go to the dvr option I have to refresh the devices before connecting to the dvr again. If this happens while a show is recording then the recording stops and then restarts causing the show to be split into 2 recordings. Sometimes I get a message "You have reached maximum playback on DVR". This really frustrating and I would like these issues resolved. I have the older HD dvr, 1 new hd set-top box, and 1 old hd stb. The playback issues happen on both hd stbs. We don't usually watch shows on the dvr itself so I am not sure how it performs during playback. 1 other note that might help troubleshooting is that I can't seem to display the IMG in full screen on the dvr.
Thanks in advance for your help,
Sincerely,
Randy R.

uncorrdinated wrote:
Hi Guys,
..I. Sometimes I get a message "You have reached maximum playback on DVR". This really frustrating and I would like these issues resolved. I have the older HD dvr, 1 new hd set-top box, and 1 old hd stb. The playback issues happen on both hd stbs. We don't usually watch shows on the dvr itself so I am not sure how it performs during playback. ..
Thanks in advance for your help,
Sincerely,
Randy R.
You can only do 1 playback at a time UNLESS you are playing back from the DVR/HUB. If you want to do 2 simultaneous play backs, one of them must be from the DVR. I ran into this same message when my wife would watch a recorded program in one room and I would try to watch a recorded program in another room. Fixed it by moving the DVR to one of the rooms where the conflict occured most often. As for the "unable to locate hub" message. This was a very common problem about a year ago, which was fixed with a software update. You need to check what version software is on all your boxes.

ITunes stops during playback and won't start until I restart the computer

I'm hoping someone can help me with this. I just reformated my computer and placed all the updates and programs back onto my computer. I had iTunes on my computer before and I reinstalled it then upgraded it to version 7.3.2.6. Now I've been reintroducing music back into the library on a folder by folder method (drag and drop). Anyway, during review of the songs I will get a random issue where the iTunes just stops during playback. I have shut down the program and restarted it. I've also shut down the following programs at different times to see if it would help:
iPodService, ITunes.exe (the program), iTunesHelper, and even taskmgr.exe. Nothing seems to help. When I restart the program I click on play (any song or playlist) and nothing happens. The only thing that I have found to help is rebooting my computer. Does anyone have any ideas?
I've check the event logs and nothing is showing in there and other programs are working without an issues.
Please help!

Any suggestions on what this can be?
A dead battery. Buy a new one.

Artwork on iphone during playback

Similar Messages

Maybe you are looking for