Artwork   posted before but no reply, PLEASE HELP!

Not showing up on iPod.
I drag/ copy and paste or load my artwork to songs and albums on itunes and it works.
I plug iPod in and it syncs it. But when I look at iPod I only see song name/ artist/ album, no artwork.
Any reasons?
Suggestions for help?
I have posted before and got no answers!

Try these steps, and see if it affects the way the album artowrk is showing (or lack thereof) on your iPod:
1 - Connect your iPod to your computer.
2 - In iTunes, click on your iPod in the Source List.
3 - Under the "Music" tab, you will see an option called "Display album artwork on iPod".
If this is already selected, try deselecting this option, click the Apply button to save your settings, and eject/disconnect your iPod.
Then, reconnect your iPod to your computer, re-select this option, and disconnect it from your computer.
If this setting was not selected when you checked on it right now, then simply check-mark this option, and click on the “Apply” button to save your changes.
Then, disconnect your iPod from your computer, and see if the album artwork is working now.
If that doesn't work, then have you first tried resetting your iPod? To reset an iPod:
First, toggle your iPod's "Hold" switch back and forth a couple of times. (Make sure to leave it on the white side of the switch).
Then, press and hold the Menu and Select (center) buttons together for 5-10 seconds.
If a few attempts at resetting don't help with your issue, then I would now suggest that you try restoring your iPod to factory settings in iTunes.
For info on restoring an iPod, see this article about that:
Restoring iPod to factory settings
-Kylene

Similar Messages

  • 3RD POST AND STILL NO REPLY :( PLEASE HELP

     Hi,
    What is required in the HOST and QUEUE field when setting a WIFI printer?
    When setting up my printer, i fill the options identical to what follows:
    PRINTER:  SAMSUNG HOME
    DRIVER:    GENERAL
    BEARER:  LPR <-----------------------------( NOT SURE IF IT IS THE CORRECT OPTION TO SELECT )
    The following fields appear once LPR is selected:
    ACCES POINT : HOME
    HOST:              WHAT COMES HERE?
    USER:              SKY00BER
    QUEUE:            WHAT COMES HERE?
    ORIENTATION: PORTRAIT
    PAPER SIZE: A4
     if it helps, my printer is SAMSUNG CLX-3175FW. It is Wifi Enable and is connected to my HOME acces point.
    please do correct me if there has to be changes to the BEARER or anything else.
    HELP URGENTLY NEEDED!

    sky00ber wrote:
     Hi,
    What is required in the HOST and QUEUE field when setting a WIFI printer?
    When setting up my printer, i fill the options identical to what follows:
    PRINTER:  SAMSUNG HOME
    DRIVER:    GENERAL
    BEARER:  LPR <-----------------------------( NOT SURE IF IT IS THE CORRECT OPTION TO SELECT )
    The following fields appear once LPR is selected:
    ACCES POINT : HOME
    HOST:              WHAT COMES HERE?
    USER:              SKY00BER
    QUEUE:            WHAT COMES HERE?
    ORIENTATION: PORTRAIT
    PAPER SIZE: A4
     if it helps, my printer is SAMSUNG CLX-3175FW. It is Wifi Enable and is connected to my HOME acces point.
    please do correct me if there has to be changes to the BEARER or anything else.
    HELP URGENTLY NEEDED!
    I'm not sure but I give it a try.Turn your security(WPA/WEP) and Firewall temporarely off. HOST is the IP address of the printer. QUEUE can be YES or a specific amount of prints, like 1,2,3......
    If I look at the manual of your printer I see that you can find the IP and MAC addresses in the Network Configuration Report.I don't know what the USER is doing there because if there is a user then there must be a password.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • I know that how to convert any documents to pdf file, but don't know how to get barcode on it. I am using windows 8.1. and want to see barcode on my documents before the print. Please help.

    I know that how to convert any documents to pdf file, but don't know how to get barcode on it. I am using windows 8.1. and want to see barcode on my documents before the print. Please help.

    Hi Frank ,
    Please refer to the following link and see if this helps.
    https://helpx.adobe.com/acrobat/kb/error-organizer-database-damaged-reset-1.html
    Regards
    Sukrit Dhingra

  • Hi! I need to cancel my membership plan for the creative cloud but I can't find any contact different from the live chat. I MUST cancel it before March 22nd. Please help me!

    Hi! I need to cancel my membership plan for the creative cloud but I can't find any contact different from the live chat. I MUST cancel it before March 22nd. Please help me!

    This is an open forum, not Adobe support... You need Adobe support to cancel a subscription
    -start here https://forums.adobe.com/thread/1703848
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
    --and two links which may provide more details, if the above links don't help you
    -http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  • All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?

    All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?
    With iOS 6, the all day events showed up in the notification centre but it lacks in the upgrade iOS 7.

    Same problem here. Some people pointed out that all-day events do show up in their notification center, but that seems only to be the case for birthdays (and only as text like the weather). I've tried it myself on my iPhone and iPad and it did work for birthdays but not for any other all-day events. I already sent this to Apple as a product feedback as well, as should everyone of you. The more people mention it, the faster Apple's going to fix this issue. In its current state, notification center is not a very helpful feature in my opinion. There's absolutely no point in not showing all-day events in the 'today' calendar overview.
    Here's a link to the product feedback page: http://www.apple.com/feedback/
    I posted my message in the iPhone section since I couldn't find a page specifically dedicated to iOS 7.
    I really love the look &amp; feel of iOS 7 but it's kinda sad to see notification center not tapping its full potential.
    Cheers!

  • I am battling to get my Album Artwork updated in my Ipod Touch - please help - it says no artwork available, I am battling to get my Album Artwork updated in my Ipod Touch - please help - it says no artwork available

    I am battling to get my Album Artwork updated in my Ipod Touch - please help?

    Just a guess here, but it sounds like iTunes is under the impression that some of the song files it is managing are located on a removable drive. Do all of your songs play from iTunes? That might be hard to know if you have thousands of songs, but if a song was imported into iTunes, but the file was deleted afterward (like if you used removable media), you might get a warning like that, and the song wouldn't play in iTunes. Just a thought.

  • Since updating to iOS 6, my 4th gen iPod touch, and my 3rd gen iPad has sound in and out. Sometimes it's on, and then all of a sudden, no sound. I've tried everything from restarting to fully resetting each one starting fresh, but nothing. Please help.

    Since updating to iOS 6, my 4th gen iPod touch, and my 3rd gen iPad has sound in and out. Sometimes it's on, and then all of a sudden, no sound. I've tried everything from restarting to fully resetting each one starting fresh, but nothing. Please help.

    I have exactly the same problem. I have tried almost everything and I am nowhere near an Apple shop as I am working in Africa.
    Did you manage to find a solution? Help please if possible. Regards Az

  • I have photoshop elements 10 and when I put the 1st disc in it will not load it just launches. I have gone through the step and troubleshooting in the manual but no dices please help.

    I have photoshop elements 10 and when I put the 1st disc in it will not load it just launches. I have gone through the step and troubleshooting in the manual but no dices please help.

    Hi,
    You can download Photoshop Elements 10 from the link below and Install with the serial number,
    http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
    Thank you

  • HT1338 I have a new MacBook. Pro and never had any issues until yesterday. I can not get it to complete its cycle to. Turn on, where I can log in like normal. I read the reboot in the little manual, but nothing. Please help!!!!!

    I have a new MacBook. Pro and never had any issues until yesterday. I can not get it to complete its cycle to. Turn on, where I can log in like normal. I read the reboot in the little manual, but nothing. Please help!!!!!

    So what happens when you boot it up? What do you get?

  • My ipod has frozen tried to reset but no luck please help??

    Ipod has frozen I have tried to reset it but no luck, please help?

    Let's ensure you are doing the reset process correctly.
    How to reset the iPod if it appears frozen or doesn't respond.
    It may take quite a few attempts and is best done connected to power.
    If this doesn't work, try restoring the iPod to factory settings.
    Restoring erases the iPod hard drive, so you will need to reload your songs from iTunes.

  • Hi I have got a iPad1 and tried to update to version 5.0.1 many times but never work.please help me.

    Hi I have got a iPad1 and tried to update to version 5.0.1 many times but never work.please help me.

    alway say it was corrupted
    Restore the iPad as a new device....
    How to set up your iPhone, iPad, or iPod touch as a new device

  • HT5161 My Mac wont except dvds or cds. It doesnt even make any noise it acts like a dvd is already in there, but there isnt, please help?

    My Mac wont except dvds or cds. It doesnt even make any noise it acts like a dvd is already in there, but there isnt, please help?

    When you push one in, what happens? Whir and spit out? Can't put one in? Which machine? Details please. If the SuperDrive is empty, then Zap the PRAM and Reset the SMC and try inserting a disc again.

  • Adobe in design cs2  crashes before it  can open - Please HELP!!

    Dear Wise ones:
    I have been using my ID CS2 for years and all of  a sudden I went to open it one day and it crashed before it opened.  I tried this several times, sent  crash reports to Adobe but when there  was no response from them I decided to try to reinstall the suite.   I did this according to the instructions (deleted the files/folders as per the instructions, uninstallled acrobat etc), then tried to open the newly re-installed InDesign  but it CRASHED again.  I called Adobe today and after being on hold for 35 minutes was told they could not help me with CS2 and I should try the forum so here I am.
    Attached is today's crash report.  It starts  with
    "<?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE AdobeCrashReport SYSTEM
    "AdobeCrashReporter.dtd">
    <crashreport version="1"
    applicationName="InDesign" applicationVersion="4050"
    build="4.0.5.688">
    <time year="2010" month="1" day="25" hour="19"
    minute="57" second="2" />
    <user host="laptop.local" />
    <system
    platform="macintosh" osversion="10.4.9" ram="512" machine="Power Macintosh"
    model="PowerBook6,4" cpuCount="1" cpuFreq="1333333328" busFreq="166402287"
    />
    <crash exception="Read Only Memory Exception"
    instruction="81830000">
      <backtrace crashedThread="0">
       <thread
    index="0">
        <stackStatement index="0" address="0x0874d1b8"
    symbolname="_GetPlugIn"/>
        <stackStatement index="1" address="0x0874d440"
    symbolname="_GetPlugIn"/>"
    etc. etc. (as mentioned, full report is attached)
    So far, the othe programs in CS2 open.
    Please please help me.  I have a show that opens in the beginning of March and I depend on In Design to make my artwork.
    Believe me , if I could afford to go out and upgrade my MAC and version of CS, I would but unfortunately I cannot do that at this time.
    Is there anything I can do to solve this problem?
    I truly appreciate your time and assistance.
    Thank you,
    Jane

    Well, the zip file works for me. The stack trace is not exactly enlightening:
       <thread index="0">
        <stackStatement index="0" address="0x0874d1b8" symbolname="_GetPlugIn"/>
        <stackStatement index="1" address="0x0874d440" symbolname="_GetPlugIn"/>
        <stackStatement index="2" address="0x2c040ff4" symbolname="__ZN7Command11DoImmediateEs"/>
        <stackStatement index="3" address="0x06094bdc" symbolname="___code_start__"/>
        <stackStatement index="4" address="0x060948ac" symbolname="___code_start__"/>
        <stackStatement index="5" address="0x06619e84" symbolname="dyld_stub_binding_helper"/>
        <stackStatement index="6" address="0x0661a378" symbolname="dyld_stub_binding_helper"/>
        <stackStatement index="7" address="0x06616b94" symbolname="dyld_stub_binding_helper"/>
        <stackStatement index="8" address="0x06605ffc" symbolname="dyld_stub_binding_helper"/>
        <stackStatement index="9" address="0x0662551c" symbolname="_GetPlugIn"/>
        <stackStatement index="10" address="0x00002c58" symbolname="_main"/>
        <stackStatement index="11" address="0x000024fc" symbolname="__start"/>
        <stackStatement index="12" address="0x00002370" symbolname="___code_start__"/>
        <stackStatement index="13" address="0xbffffd54" symbolname="unknown"/>
       </thread>
    To me this implies something wrong with a plugin or a system library. Did you delete InDesign and your ~/Library/Adobe/InDesign folders before re-installing? Otherwise there might be something wrong with your OS...

  • Not able to post material in MB1C.  Please help with proper answer.

    Hi I am posting material in IDES thru MB1C, since i am not allowed to do PGI if i dont do a stock upload.
    While doing MB1C error is below
    "MB1C=Period  003/2008 is not open for account type S and G/L 799999."
    I used the below transaction and written the status.
    OMWD=
    Val area       Co Code   Company name      chrt/Accts     Val. Grpg
    BK00                 BK00        BK            INT                0001
    MMRV:
    Posting periods
    Current period    03 2008
    Previous period  02 2008
    OBYC:
    VAL AREA GENERAL MODIFICATION    VALUATION CLASS    DEBIT          CREDIT
    BKOO                                                         BSA      7920                          799999     799999
    i dint not use OB52 , i dont know how to assign.
    Please reply with proper and describtive answer and proper assignment.
    Points would be awarded if  the problem get solved. \
    my AOL id is supratiproy, any one can ping me as well.
    Please help it is very urgent.
    Thanks & Regards
    Supratip

    Hi,
    Go to SPRO.
    Financial Accounting -> Financial Accounting Global Settings -> Company Code -> Enter Global Parameters -> Select the Company Code you are processing.
    Check the Posting Period Variant.
    in OB52
    For that same variant for Account Type S, in Column From Period 2, make it as 1 and in To period (next to that) change it to 16 and also year as 2008, Save.
    Hope this helps.
    Thanks
    Krishna.

  • For some reason, my itunes both is inable to unstall the new update, and since this has been happening my iphone 4 wont be recognised either (recogised by windows but not itunes) please help!!

    Well its all prety much in the heading, itunes is unabe to update and iphone 4 wont be recognised, but it cmes up in 'computer'? please help, i have tried some things off the apple support page and googe search but hasnt helped. andi have loads of new beats ready to put on!

    yer i do, its say 'errors occured while downloading the updates. If the problem persists, choose tools> Download only and try installing manually.
    i have tried installing he files as it says above but then it doesnt work and says this:
    the installer encountered errors before configuration. your system has not been modified. to retry these operations at a later time , please run the installer again.
    i have tried both methods countless times with no success?

Maybe you are looking for

  • Opening Safari PDFs in Acrobat

    I used to have Safari set to open PDFs in Acrobat. Since updating Safari (5.1) and Lion, all PDFs in Safari open in a new Safari tab. I used to click on a link to a PDF in Safari, the document would automatically download to my mac, and automatically

  • How to add a user to the wheel group?

    How to add a user to the wheel group in leopard?

  • ABAP Versus PI for integration

    When Would we use ABAP Verses PI for integration, can u provide some examples? Thanks, Khan

  • Installer OS X Moutain Lion

    Contrairement à ce qu'indique APPLE OS X Moutain Lion ne s'installe pas à partir de OS 10.6.8 sur un mac book air récent. APPLE ressemble de plus en plus à WIndows !

  • Electronica newbie q's

    Ok, I'm a bassist that digs dub and wierd sounds. I've spent all of my music time playing bass and recording, and now I'd like to learn how to make those cool wierd sounds I hear in electronica and trip hop stuff. So, school me please! Oh, I should a