Artwork Problems Solved (for me and hopefully for you)

Ok so for all you having problems with your artwork going missing on your devices I pretty much just hit the nail on the head!! Not sure if I was the first to mention this or notice it but after hours and hours of scratching my head I found it out.
The problem occurs when you are transferring music to your device and its being converted to a lower bit rate.
If your music is already at 128kbps in your music library and you have the option ticked to "Convert higher bit rate songs to 128kbps" Then it will copy the artwork across. Obviously if you have this option ticked and the song starts off at a higher bit rate the album artwrok is not copy with the songs.
Which then also means that if this option is not ticked and you copy your music onto your device at what ever bit rate its in your library as, whether it be 160, 256 or what ever it will carry the artwork across!
Hope this helps!

Sorry for the typos by the way, type too quickly!
Cheers

Similar Messages

  • Installation problems solved for XP SP2 systems.

    I've been pulling my hair for days trying to install SC2, but had no luck.
    The installation process DOES have a bug. Use the following tactic in addition to disabling any firewalls and virus programs:
    Right-click on the installer file and select 'Compatibility' . Click 'Run this program in compatibility mode:'. Finally, simply select Windows NT 4.0 (Service Pack 5) mode.
    Problem solved for now. Hope this helps.

    This is very interesting akian ty - I will definitely try this at the weekend. I can install and run on a laptop with XP SP2 - and it had previous versions installed on it. However on the desktop PC I have not been able to install.
    My problems have been with opening ports and appserver not starting. I will post back here how I get on with your tip. Thanks and also for the other suggestions that people have tried to help me with.
    les

  • I created thirty pages using ipages and my web manager is having difficulty placing them on my website, some change color, some slide off the screen.  Is there a place for problem solving for ipages and website?

    Hi, I thoroughly enjoy the ipage program and prefer it to the similar one offered by Word.  But my web manager is having countless difficulties.  I converted everything to PDF's for him but several of the ipages are loading with a different backround color.  He says he has to meta tag each page since this cannot happen automatically.  On my Mac, the pages are loading after the navigation bar is selected, and it takes about three to four seconds.  On my iphone, however, each page takes at least eight seconds to load and then it slides right off the screen before it can be read.  I really want to continue using ipages to update my website but I am a rookie and do not understand why each ipage cannot simply open when someone goes to my website.  It would be great to do away with the loading of each page and I would like to also minimize any of my margins.  Thanks for any help on this strange matter.  Mary

    Converting pages to pdf is not the usual way make a website.  You may want to try some other app where you can directly create the html which is the customary format for the web.

  • Kernel32.dl problem solved for windows xp with ser...

    i'm new to the community but have usingg skpe for some time now. I have found a way to use skype 6.6.0.106 on my computer running windows xp with service pack 2 without updating to service pack 3. I put together an old computer for my son to use as a starter computer. He's 6 years old and know how to point and click. Nw when I'm out of town and he wants to see and talk to me, uses skpe. if anyone is interested in know how I defeat that kernel32.dl problem, respond to this post and I explain how I did it.

    D4849 wrote:
    i'm new to the community but have usingg skpe for some time now. I have found a way to use skype 6.6.0.106 on my computer running windows xp with service pack 2 without updating to service pack 3. I put together an old computer for my son to use as a starter computer. He's 6 years old and know how to point and click. Nw when I'm out of town and he wants to see and talk to me, uses skpe. if anyone is interested in know how I defeat that kernel32.dl problem, respond to this post and I explain how I did it.
    I am facing this problem. Pl let me know how to solve it.
    Thanks in advance

  • Problem solver for high battery usage iphone 4s............

    i keep seeing many people on here with this problem with the battery! 5.01 upgrade with the 9a406 version will significantly improve your battery life.
    i did a restore through itunes and it updated to this new version and it works great! i have been told that some people only are getting 9a405 back when they restore.
    if so download the upgrade, the instructions are all on here if you look for them, also how to install through itunes. good luck guys.

    Well im on 9a405 and my battery is fine lasts for days so i dont know what people are on about the battery life is way better than my iphone 4
    PS its a 4s 64gb simfree/unlocked bought from apple that i have

  • A3 Conversion problems SOLVED for the moment.

    When I first launched A3 and began the conversion process, I ran into the same problems as others here. All 8 processors on my Mac Pro were maxed out. Other apps ran glacially slow. And the conversion process simply stalled with no progress having been made after 12 hours.
    Before I began the A3 conversion, I had updated my Vault.
    Last night, I deleted the in-conversion library, and made a duplicate of my Vault for safety. I then rebooted my Mac Pro in 64-bit mode pressing 6 and 4 at boot.
    I launched A3, turned off Faces (for the moment) and created a new library in the original location. A3 will not directly open or convert the A2 vaults so my vault had to be imported.
    A3 has now been importing and converting my A2 vault for 12 hours and it's making good progress. All of the masters and projects have been imported. A3 is now half way through processing (upgrading) the 30,000 masters (basically a mix of Canon 6Mp and 10Mp RAW images) in my library. The processors almost never max out and the computer is responsive.
    So far, so good.
    Cheers.

    Using A2, I was able to successfully restore my library from the A2 vault. I took care not to use any of the tools within A2 just in case programming conflicts existed due to having both A2 and A3 installed.
    After the restore had completed, I quit A2, copied the A2 library to its normal location, and then launched A3 using the Option key to allow me to specify which library to open.
    A3 offered to upgrade the library, and I agreed, also allowing it to upgrade all photos to A3 standards.
    Note. I had Faces turned off at the time.
    The library upgrade proceeded flawlessly.
    Once completed, I browsed my library. There were still a few green Mark III previews, and my Mark III images were still being processed using the A2 processor.
    I then deleted the old A2 vault, and created a new one from A3 to replace it. A3 has just finished backing up my library to the new vault.
    (Note. At all times during this procedure, I've had at least 3 copies of my library including the one in use by A3. If you lose a digital photo, *it's gone*. Don't take risks.)
    My next step will be to select all of the photos and reprocess them using the A3 Processor ( *not recommended* if you're a professional photographer who makes money from their photos and has spent hundreds of hours adjusting and perfecting your photos for your clients. Do your own testing before deciding whether to reprocess).
    I'll then update the vault before proceeding to turn on Faces. If the Faces process corrupts the library, I'll be able to restore from the vault.
    Recommendations
    Boot in 64-bit mode if you can, anytime before launching A3.
    Back up your A2 library to a vault.
    Relaunch A2 holding the command-option keys, and repair the library. If you have time, consider rebuilding the library (although that option might not have been available in A2).
    Launch A3 holding the option key down.
    When given the option, create a new library. This will give you the opportunity to do:
    Turn off Faces in Preferences.
    From the File menu, choose Switch to Library and choose your A2 library.
    Continue...
    Bugs
    Previews are sometimes not updated correctly. A forced Generate Preview is required.
    My A3 vault turned yellow after making a few adjustments to my images. When I clicked to update the vault, I was shown the same warning dialog that others have reported:
    Aperture Update Vault error text:
    *Not Enough Disk Space*
    The vault "Aperture Vault" does not have enough space to hold your library.
    17179869169.15 GB is needed, but only 82.38 GB is available.
    *Final Recommendation*
    If you're a professional photographer, wait for the update before upgrading to A3 :–)
    Cheers all.

  • HT201210 1015 problem solve for me please

    i need solution for me ios and  article 1015 please

    Error 1015 indicates that you have jailbroken your device. Jailbreaking is a violation that means your phone is unsupportable by Apple.

  • [problem solved for me] ipod shows up in windows but not in itunes

    hi!
    i've got an 2nd gen ipod 10 gig.
    after having problems with mine i low level formatted it and ran some diagnostics tools from hddguru.com.
    and after installing itunes 7 it didnt showed up and i was pretty ****** of. but formatting the ipod with explorer (fat32, quickformat) solved the problem
    hope that will help anyone

    Have you had a chance to look at this troubleshooting page? It may be of some help: iPod shows up in Windows but not in iTunes

  • Home folder Creation problem solved (for me anyway)

    I have had an issue where when I asked my server to create home folders it was not making them. I also tried all the usual things like removing the share, sudo createhomedir -a and even ran the combo updater on the server again all to no avail. Upon looking at another server that was creating home folders I found that when I selected Network in the Finder SideBar there was an alias of Servers. This alias on the working server showed an alias of the server HD and in turn showed the contents of that drive. On the server that was not working the Servers alias in Network was an alias of a white document and showed nothing.
    What i had to do to fix this was to open Terminal and su to root, cd /automount, rm Servers and restart. When this was done going to Network in the sidebar and selecting Servers then showed an alias of my server HD which in turn showed the contents of the drive. I then used WGM to remove the network mount for home dir's and stopped sharing the folder. I then re-enabled the share and then set the home dir mount again. After this it succesfully created the home folders in that dir when asked to and I was then able to log in and manage the account.
    I hope this is of some use to others...
    regards Gary.
    PowerBook G4 1.67   Mac OS X (10.4.7)  

    great stuff, last time this happened to me i just backed up the directory and formated reinstalled restored and it worked, took 3 hours...this would take a lot less time... post this in mac os x hints to eh..
    Cheers
    Rob

  • No. 1 problem solver for many issues: restart device

    After trying lots of things to get my iTunes Match songs back on my iPad, I found that simply restarting the device resolved the issue.
    Most support documents don't mention "restarting your device" as a troubleshooting option.
    This works for many devices, including any computer, router, phone, etc.
    Alternative troubleshooting options:
    - Restart iTunes Match in the iPad / iPhone Settings
    - Re-login or re-enter your password
    Any suggestions to add to this list are welcome!

    Hi EJPM,
    How are you doing the software update? Are you doing it via the BlackBerry® Desktop Software or the web based update at www.blackberry.com/update?
    Thanks.
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • E-mail Send problems solved for me on10.5.1

    I was having problems with sending e-mail. I went to this article http://docs.info.apple.com/article.html?artnum=307369 and followed it and now my outgoing e-mail also works. I use roadrunner cable with TW.

    Worked great

  • After upgrading to FF27, cpu loads up and FFbecomes slow. Worked fine before upgrading to 27. Why are you asking everyone to trouble shoot this for you?

    Open firefox, after the third or forth web page, firefox bogs and causes the cpu to slow down. I can close and open firefox and it speeds up for about three web pages and repeats the slow down. I have read most of the threads and this is a problem with the software and it seems you are making the users jump through hoops for nothing. I twas caused when I upgraded to FF27. I am going to re-install 26. I had the same problem on my laptop and it cured the problem. Both are running XP sp3

    What addons do you have installed on the system?
    In order to be able to find the correct solution to your problem, we require some more non-personal information from you. Please do the following:
    *Click the Firefox button at the top left, then click the ''Help'' menu and select ''Troubleshooting Information'' from the submenu. If you don't have a Firefox button, click the Help menu at the top and select ''Troubleshooting Information'' from the menu.
    Now, a new tab containing your troubleshooting information should open.
    *At the top of the page, you should see a button that says "Copy text to clipboard". Click it.
    *Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.
    If you need further information about the Troubleshooting information page, please read the article [[Use the Troubleshooting Information page to help fix Firefox issues]].

  • Problem to measure 0% and 100% duty cycle of a PWM.

    Hi,
    I am using counters of USB-6341 to measure duty cycle of PWM just by following the example 'Meas Duty Cycle-Buffered-Finite.vi'. It works almost all the time. However, when the duty cycle of a input pwm is 0 or 100%, the DAQ can't read anything, in another word, it can't measure 0 or 100% duty cycle.
    How to modify that?
    Thank you very much :-)
    Nan

    That's the thing about PWMs, you never really know if the PWM is 0% or 100%.
    Let's say we have a 50% duty cycle, at 1/2Hz.  So low for 1 second, high for one second right?  What if we run at 1/20Hz, so low for 10 seconds high for 10 seconds.  Or is this a 0% duty cycle for 10 seconds, and a 100% for 10 seconds?
    A true PWM read will never be 0% or 100% it will just keep waiting until the trigger is seen, and recalculate the frequency and duty cycle of it.  The solution to your problem is for you to define a duration to watch for a change, and if one isn't seen, then you can define 0% or 100% appropriatly.
    So I would recommend taking your duty cycle like you normally are, and then at the same time watch the digital signal for however long you want, if the digital line does not change state, then output 0% if it is low and 100% if it is high and ignore what ever duty cycle you read.  But if the digital line does change state, then use the read duty cycle as the actual value.
    Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
    If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

  • Problems with Messaging Bridge and MQ.

              Hi,
              I'm trying to use the Weblogic messaging bridge to provide a set of local queues
              to my application server from a set of MQ queues, using XA.
              My problem is that when the bridge starts up, it gives the following error:
              <Aug 5, 2002 4:35:14 PM BST> <Info> <MessagingBridge> <Bridge "BRIDGE.STATUS1"
              failed to connect to the source destination and will try again in 20 seconds.
              (javax.resource.spi.ResourceAllocationException: CreateManagedConnection Error:
              ConnectionFactory: failed to get initial context (InitialContextFactory =weblogic.jndi.WLInitialContextFactory,
              url = file:////blah/adminobjects, user name = null, password = null)>
              <Aug 5, 2002 4:35:14 PM BST> <Notice> <WebLogicServer> <ListenThread listening
              on port 8051>
              I think the problem is as follows...
              This bridge should be connecting to a file-server JNDI implementation, and should
              therefore being trying to obtain a com.sun.jndi.fscontext.RefFSContextFactory
              initial context, not a weblogic.jndi.WLInitialContextFactory one. I have set up
              the destination in the weblogic console with a file server context, but this doesn't
              have any effect.
              The file server JNDI implementation definitely works, as I can access the queues
              directly and use them to call MDBs.
              Can anyone help?
              

              You mentioned that the patch initially worked. What did you do after
              that?
              You can turn on the messaging bridge debug by adding those to
              you script for starting the server:
              -Dweblogic.Debug.DebugMessagingBridgeStartup=true
              -Dweblogic.Debug.DebugMessagingBridgeRuntime=true
              See what you get in the server log.
              You need to post your config.xml and the script as well for further
              help.
              Dongbo
              Christopher Sceats wrote:
              >
              > I'm afraid this is not the problem - I have all of the required things in my PATH
              > and CLASSPATH:
              >
              > CLASSPATH:
              > com.ibm.mq.jar
              > com.ibm.mqbind.jar
              > com.ibm.mqjms.jar
              >
              > PATH:
              > /opt/mqi/bin
              > /opt/mqi/java/lib
              >
              > Dongbo Xiao <[email protected]> wrote:
              > >The possible problem is your PATH and CLASSPATH. You have to have the
              > >
              > >MQSeries stuff in your PATH and CLASSPATH (NOT the AdapterClasspath
              > >attribute of your BridgeDestination) for starting the WebLogic server.
              > >
              > >Those are all documented. Please take a look
              > >at the WebLogic Server online doc
              > >http://edocs.bea.com/wls/docs70/adminguide/msgbridge.html
              > >and
              > >the latest integrating foreign providers white-paper. It is
              > >available on dev2dev, or you can find it here:
              > >http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.jms&item=9364&utag=
              > >
              > >Dongbo
              > >
              > >
              > >Christopher Sceats wrote:
              > >>
              > >> Thanks Dongbo.
              > >>
              > >> This initally worked and I was able to connect the bridge to the source
              > >destination.
              > >> However, today this no longer works, and I get the following error...
              > >>
              > >> <Aug 6, 2002 12:00:02 PM BST> <Warning> <Connector> << Weblogic Messaging
              > >Bridge
              > >> Adapter (XA) > ResourceAllocationException of javax.resource.ResourceException:
              > >> Failed to start the connection on createManagedConnection.>
              > >>
              > >> Having seen a previous post on this subject, I tried sending a message
              > >to this
              > >> queue with a standalone client, and this works fine. However, when
              > >I use the application
              > >> server it fails to start the connection. Is there any way I can get
              > >further diagnostics?
              > >>
              > >> Dongbo Xiao <[email protected]> wrote:
              > >> >Are you using 6.1SP3? There is a known problem in 6.1SP3 that may
              > >have
              > >> >caused
              > >> >your problem. Contact BEA support to get the Temporary Patch for the
              > >> >problem.
              > >> >The internal Change Request is CR081511 and the patch is
              > >> >CR081511_61sp3.jar.
              > >> >
              > >> >Dongbo
              > >> >
              > >> >
              > >> >Christopher Sceats wrote:
              > >> >>
              > >> >> Hi,
              > >> >>
              > >> >> I'm trying to use the Weblogic messaging bridge to provide a set
              > >of
              > >> >local queues
              > >> >> to my application server from a set of MQ queues, using XA.
              > >> >>
              > >> >> My problem is that when the bridge starts up, it gives the following
              > >> >error:
              > >> >>
              > >> >> <Aug 5, 2002 4:35:14 PM BST> <Info> <MessagingBridge> <Bridge "BRIDGE.STATUS1"
              > >> >> failed to connect to the source destination and will try again in
              > >20
              > >> >seconds.
              > >> >> (javax.resource.spi.ResourceAllocationException: CreateManagedConnection
              > >> >Error:
              > >> >> ConnectionFactory: failed to get initial context (InitialContextFactory
              > >> >=weblogic.jndi.WLInitialContextFactory,
              > >> >> url = file:////blah/adminobjects, user name = null, password = null)>
              > >> >> <Aug 5, 2002 4:35:14 PM BST> <Notice> <WebLogicServer> <ListenThread
              > >> >listening
              > >> >> on port 8051>
              > >> >>
              > >> >> I think the problem is as follows...
              > >> >>
              > >> >> This bridge should be connecting to a file-server JNDI implementation,
              > >> >and should
              > >> >> therefore being trying to obtain a com.sun.jndi.fscontext.RefFSContextFactory
              > >> >> initial context, not a weblogic.jndi.WLInitialContextFactory one.
              > >I
              > >> >have set up
              > >> >> the destination in the weblogic console with a file server context,
              > >> >but this doesn't
              > >> >> have any effect.
              > >> >>
              > >> >> The file server JNDI implementation definitely works, as I can access
              > >> >the queues
              > >> >> directly and use them to call MDBs.
              > >> >>
              > >> >> Can anyone help?
              

  • I solve my problem of black screen when starting up my Mac pro, namely by the button lighting and then i saw the login screen. Hopefully it works for you too.

    I solve my problem of black screen when starting up my Mac pro, namely by using the lighting button and then i saw the login screen. Hopefully it works for you.

    It was the PRAM.

Maybe you are looking for