Artwork sometimes doesn't display properly in iTunes 10

I'm seeing that in iTunes 10 when you choose 'Album by Artist' mode and display Album artwork as 'Large' it will not display at all if the there are not enough songs to create a high enough area for the artwork to fit. It seems to be when you have 6 songs or less this happens. What I would expect to happen in is case would be that the artwork size chosen would dictate the height of the area for the Album. In other words the Album area would resize to accomodate the artwork even if it meant that there was blank space after the rows of songs in the list.

Katrina, Thanks very much! That does exactly what I was looking for; I guess I overlooked that one in the menu.
-jonR

Similar Messages

Apple tv 3 airplay doesn't work properly on Itunes 10.6.1

So me and my dad recently bought the new apple tv and everything works fine except for a few things, he doesn't connect properly with Itunes so I can't use Airplay and Homesharing. Is there a solution for this? I've seen more discussions on the community but haven't discovered a good solution yet.
Another strange thing about airplay is that sometimes it does show up in itunes but you can't connect cause of unkown fault (-150006), sometimes it can't connect but it's trying to for a long time and the connection window just dissapears and you can try again but still nothing is going to change and in very rare occassions it works?
We've tried a lot of things: resetting wi-fi router, resetting and restarting apple tv, turning on and off wi-fi on macbook, restarting itunes or macbook, we've bought an ethernet cable but still that doesn't make any difference, I've turned firewall off but that didn't work either.
My dad went to a local authorised Apple reseller and the only thing they said is that it should work so that didn't help us much.
So what can we do about this?

Also, the solution of using an Ethernet cable is no good for me. I live in a shared house, the router is in the landlords room. So I can log into the router and make changes, I have also tried rebooting, and resetting the router. But can not permanently use an ethernet cable.
Anyway, my friend is using his (unupgraded) apple tv just fine in the next room.
As I mentioned, it was just fine the way the router is now BEFORE the firmware upgrade. Straight after it connects for a few minutes at most. And in the last few hours it has refused to connect at all

Index page CS4 doesn't display properly for google chrome users

index page CS4/ Dreamweaver doesn't display properly for google chrome users, shows as a blue page / version of Chrome is 17.0.963.56 m. version of flash is 11.1.102.62. Operating system is Version 6.1 (Build 7601, Service Pack 1). Javascript version 1.7. Quicktime is not installed.

www.pianofortemusicschool.com

Site doesn't display properly when viewed in Windows 8.1 and IE11

Web site doesn't display properly when viewed in Windows 8.1 and IE11. Site html and css validates no errors at W3C. Any ideas?

The following is what I see in IE11 on a Windows 8.1 system, no difference using Firefox, Chrome or Safari on the same system.

Movie video artwork doesn't display properly on iPad video app

I have seen the discussion around the problems / solutions regarding the proper displaying of TV shows on the iPad when accessing a shared library, but my problem is with Movie files. The artwork does not display properly. Sometimes the artwork from one movie will be duplicated onto another movie, or they will be all switched around. I have both iTunes purchased movies and converted backups of from my DVD library.
Has anyone else had this problem?
I have tried many things. While I see changes in the displayed artwork, they are generally messed up in one way or another on the iPad when accessing the shared library on my computer.

Curiously enough, if I click on a movie from the shared library on the iPad, the correct artwork shows on the right sight of the window that let's you play the movie or navigate to a chapter. When I go back to the menu screen for all the movies in the shared library, the artwork is still wrong.
Artwork is messed up even for home-created movies - one of them shows a preview screenshot of the Warner Brothers logo instead of the picture I have in the Artwork setting in iTunes.

Metadata not displaying properly in iTunes 11

Anyone have any idea why movies that I've recently ripped and converted into iTunes compatible files aren't properly displaying the metadata that I know is embedded within the file? Both movies shown below were converted using iVI (from South Pole Software).
Here is how a properly tagged movie file should appear upon being selected in Grid View mode in iTunes 11: (notice all the movie details displays properly)
To exemplify my problem, here's a screenshot of 'Superman Returns' when I select it in Grid View: (where did all the movie info go?)
Notice how it doesn't display the Plot Summary, Actors, Producers, DIrectors, etc?
When I hit "Get Info" (Cmd+I) with either file, they both seem to be tagged with all of the same fields, and yet the A-Team is the only one that winds up displaying that information when I view the movie in Grid View mode.
Anyone have any idea why this is happening, and how I can go about fixing the problem?

I had been experiencing this very same problem, and it drove me crazy. Luckily, after searching for the answer on multiple forums, I found a solution. MetaX is a program designed specifically for tagging iTunes movies. Not only can you manually input all the required information, but you can also automatically input all the information from outside sources from within the program. It worked beautifully for me with my copy of Donnie Darko, which I ripped using HandBrake.

WEB.SHOW_DOCUMENT sometimes doesn't display the generated PDF file

Hi all,
I'm using the following code to generated my report from Forms: 
V_REPORT_ID := FIND_REPORT_OBJECT(V_REPORT_NAME);
V_REPORT_SERVER_JOB:= RUN_REPORT_OBJECT(V_REPORT_ID,P_LIST);
 V_JOB_ID := substr(V_REPORT_SERVER_JOB,length(:GLOBAL.REPORTS_SERVER)+2,length(V_REPORT_SERVER_JOB));
 V_REPORT_STATUS := REPORT_OBJECT_STATUS(V_REPORT_SERVER_JOB);
LOOP
 IF V_REPORT_STATUS = 'FINISHED' THEN
 V_TMP_PDF := :GLOBAL.APACHE_HTML_FOLDER ||'rpt'|| V_JOB_ID ||'.pdf' ;
 COPY_REPORT_OBJECT_OUTPUT(V_REPORT_SERVER_JOB, V_TMP_PDF );
 WEB.SHOW_DOCUMENT(:GLOBAL.AS_HOME_URL || 'rpt'|| V_JOB_ID ||'.pdf' ,'_BLANK');
 END IF;
END LOOP; 
Everything works fine except the WEB.SHOW_DOCUMENT part. In some clients, this command does what it required from it and opens a new browser window with the PDF report displayed on it. In some other clients, this command does nothing: now window dispalyed. When I refer to the Application Server, I see the PDF report successfully generated there. When I put the URL of the generated report manually in the browser address, I can see the report.
 
Why the WEB.SHOW_DOCUMENT doesn't display the generated PDF report in some clients?

I agree with the previous 2 posters.
Also firefox and ie handle it differently. Make sure you test on what your clients use.
Sometimes acrotray.exe is completely retarded and doesn't work.

E61i internet browser doesn't display properly

Hello,
I never had any problems browsing the internet on my E61i. My Nokia is always switched on, but today I had to switch it off for a while. After switching in on again, I wanted to use the internet on it. The strange thing was that it wouldn't display any web page properly any more. Pages look messy, like the web browser doesn't how to handle HTML etc. and display it properly.
I often visit web pages not specially made for PDA's, so when visiting these I had to scroll horizontally. That was ok. But now when visiting these pages I cannot scroll horizontally any more; the browser puts all web page contents beneath each other, if you know what I mean. Now I can only scroll vertically.
The conclusion is that many web pages I used to visit have now become useless since the E61i web browser doesn't display them any more as they used to be displayed, the pages used to look like as if you visited them from a PC, but not any more.
Does anybody have a clue?

It sounds like a cache issue. When you view the page, that
page is loaded into your (or your client's) browser's cache memory.
This is done so that when you return to that page it will load
faster (since it is already loaded into memory).
This will only happen if a person has been to the page
recently. There is a limit on the amount of information your
browser will store in cache memory. The more you surf, the more
likely it is that the page will be replaced in the cache memory
with some other information.
You (and your client) can, depending on what browser you are
using, set your preferences so that all web pages will be
completely reloaded every time you visit them. In IE 6 for Win:
Tools>Internet Options>Settings> Select 'Every visit to
the page'. You can also set your cache to be the minimum amount of
space alotted. Note: This doesn't really work very well in IE 6 for
WIN. I use firefox for reviewing changes because I have found IE 6
is completely unreliable for viewing the latest.
Most other browsers will allow you to hold down Shift and hit
'refresh' to throw out the cache for that page and view the latest.
As far as I know this is standard operating procedure for proofing
new pages.
If there is a coding technique to force a browser to use only
the latest information, I don't know what it is.
Good luck.

Paypal express checkout doesn't display properly - Firefox 33.0.3

Paypal express checkout doesn't appear to be displaying properly in firefox (link to screenshot below). I've tried it with Chrome & IE and it works fine, so can only assume this is a firefox bug.
Screenshot:
http://voodoo-london.com/ss.png
I've tried everything in regards to clearing cookies & cache but still no luck.
Can anyone offer any explanation or resolution for this?

Separate Issue; Update your
Flash Player '''v15.0.0.189 http://get.adobe.com/flashplayer/'''
Please flag your last post as '''Solved Problem''' so other will know.

Externally loaded swf in second window doesn't display properly?

I have a bitmap based flash game (bitmapdata generated screen) that I'm trying to load in to a secondary nativewindow generated from a main flash (not AJAX/HTML) based AIR app that's a graphical menu. I.E. you click on a selection in the menu, and it pops open a secondary nativewindow with the flash game running in it. The problem is, the game itself gets mangled in the secondary window when it loads in. Keyboard input goes away, the bitmap doesn't draw properly (it streaks like its not drawing the background image each frame), most of the game objects its supposed to draw in to the bitmap are missing, etc.
When I make the game itself in to its own AIR app and run it direct, it works just fine. So I'm puzzled. Is there some kind of special coding considerations in the as3 side that I'm missing with the original game? I.E. if a flash based AIR app launches another nativewindow and loads a swf in to that, does it share some kind of variable set, display list, etc. with the calling window? Something else? Any help would be appreciated.

There are a few differences between (A.) letting the AIR runtime load content into the initial window and (B.) loading content into a new NativeWindow.
1. In case A, the stage property is available in the class constructor for the main sprite. In case B, this is not the case. You may have to use an ADDED_TO_STAGE event handler to do some class initialization.
2. In case A, the initial scale is based on the metadata present in the SWF -- this results in the behavior you would expect. In case B, there is no SWF to base the scale on when the window is created, so a default scale is used -- this is rarely results in behavior you would expect (unless the window happens to be created with a size of 72x72 pixels).
If you aren't setting the stage to noScale, then this could account for some of the visual issues. (See http://www.adobe.com/devnet/air/flex/quickstart/launching_windows.html for an explanation of the scaling issues.) The easiest thing to do is to set the Stage scaleMode to noScale and the align property to the top left setting. I'm guessing your drawing code isn't expecting the scaling so things are getting put in the wrong place.
3. In case A, the content is automatically put in the application sandbox. In case B, it depends on the URL.
As for the Keyboard input, this may depend on how you are loading the SWF and from where. This could be related to #3 above, although I would expect to see security errors. How are you adding your keyboard event handlers?

Navigator Window Doesn't display properly

Hello,
Suddenly the Navigator Window on the Left of JDeveloper doesn't show properly.Usually the window has 2 subwindows : the top which displays WorkSPace-Projects-classes and bottom which shows the members and methods for each class. Now my top window doesn't show at all. It is like it has been minimized and i cannot restore it. The bottom window occupies all the space.
When i place the cursor on top of the upper border of the bottom window (just under the green X icon) the cursor changes to a shape that shows that there is another window there but i cannot drag the border down and display again the top navigator window.
What can i do about that ? ?

I have seen this problem before but I have not been able to reproduce it.
The workaround is to:
- Open the 'Welcome' workspace (Help|Welcome Workspace)
- Close JDeveloper
- Launch JDeveloper
- Open your workspace
Hope this helps.
Please let us know if you are still running into problems.
Regards,
Arun

SimpleChat doesn't display properly for spark on mobile

I'm using the latest LCCS Spark Beta version. The SimpleChat displays RAW html instead of the styled text, plus it doesn't scroll properly. This problem was posted a few months back but is yet to be resolved. Looking at the LCCS sdk source code, the problem seems obvious: SimpleChat uses the class RichTextArea which the lccs team has created. That class checks to see if "textFlow" exists. If it doesn't as in the case of mobile it just assigns the raw html to the text field which is obviously unacceptable since the user will end up seeing raw html instead of styled text. Below is the problematic code in the lccs RichTextArea class. Is LCCS team supporting mobile devices?
               if (textFlow)
                    textFlow = TextConverter.importToFlow(str, TextConverter.TEXT_FIELD_HTML_FORMAT);
                else {
                    //StyleableTextField(textDisplay).htmlText = str;
                    textDisplay.text = str;

www.pianofortemusicschool.com

CSS - main content h1 and p text doesn't display properly

Hi all,
I know this is something really simple, but I just can't seem to get it right. The h1 and the p text in the main content should have left and right padding to display properly (i.e. space on either side so it's not squished against the Accordion Spry), but it doesn't work. It shows correctly in DW, but not online. I'm just learning CSS so sorry for the ignorance! I've tried everything I know and can't seem to get it right. I would appreciate ANY help at all.
http://www.TailgatorsHockey.com/news.html
Attached is the .css file...
Thanks so much!

The padding and margin are certainly showing in the browser for the h1 tag but you have no padding or margin declared in your css styles for the paragraph tag in the 'main-content' <div>
Add ths to your css styles:
#main-content p {
padding: 0 25px 0 25px; /*top/right/bottom/left*/
margin-left: 10px;

How to have fonts display properly in iTunes?

I have a lot of foreign songs that are named in non-latin alphabet. iTunes displays gibberish.Is there a way for them to display properly?

If your episodes (posts) within a podcast contain suitable playable media files they will show in iTunes, but the URLs must be within 'enclosure' tags' and be of the acceptable formats. As you've evidently got a podcast in the Store (I assume) you must have episodes with media, so you need to do whatever you did with those if you have episodes which aren't showing: there have been a number of cases of people not having followed the correct procedure in Wordpress and so having episodes not showing, but I'm afraid I can't advise on the specifics.
The acceptable media are.mp3. .m4a, .m4v, .mp4 and .mov - not Flash (.swf), YouTube or any sort of embedded media player.

Album art sometimes doesn't display in grid view

The album art now displays erratically in grid view. If 10 albums are showing, maybe 4 will be missing art. All art seems to display properly in every other view. Is this a bug introduced in recent upgrades?

have the same problem. some artwork doesnt show up in "Albums" view but in all other views. curious to hear if somebody knows something.

Artwork sometimes doesn't display properly in iTunes 10

Similar Messages

Maybe you are looking for