Artwork tab greyed out for video

I created a movie in iMovie, then clicked File > Share > iTunes to load the movie into iTunes.  Within iTunes, the movie appears as a H.264 M4V file.  So far, so good.
When I click Option - Get Info within iTunes to edit the tag data, the Artwork tab is greyed out.  I can edit all the other tag data, but I cannot add an image in the Artwork tab.  Any ideas how to un-grey the Artwork tab?
FYI that I can access the Artwork tab for other movies that I created in iMovie.  So it generally works ok, but for some reason it's not working for the movie that I created this week.
I am using OS X Yosemite with the most recent versions of iMovie and iTunes.

I ran the iMovie output file thru Handbrake to produce a new H.264 M4v file, then loaded it into iTunes.  I now can edit all the tag data, including artwork, on the new file.  Still don't know why the first file did not work, but at least I have a work-around ...

Similar Messages

  • Why is Import Video greyed out for a new Flash project?

    I have been trying unsuccessfully to load any MP4 (H.264 encoding), FLV, or F4V files into a brand new project. I've tried importing FLV and F4V files via the Import to Library and Import to Stage menu choices but all result in "One or more files were not imported because there were problems reading them" error message. I just downloaded Flash CC today (Feb 23, 2014) and cannot even get started on my project since I cannot seem to load a video into the library or stage. I've looked at the tutorials, but they assume that I can choose the greyed out Import Video... menu choice. Searching the discussion didn't help me as most of the discussions are off-topic or from 2 or more years back.
    Thanks,
    Xtraspatial

    Thank you sinious. I had QT 7.5.5 installed. The problem was unrelated. Like a bufoon, I created a new HTML5 canvas, which is unable to import videos. When I switched to a AS3 canvas all was as it should be. And there was rejoicing throughout the land! Case closed.

  • Within my iTunes store every single artwork is greyed out.

    Hi,Within my iTunes store every single artwork is greyed out. This also happens on my iPad, iphone and other family members devices. Any Solutions?
    This image gives you an idea of what is going on.

    Hey there Gouldde,
    It sounds like you have multiple devices all exhibiting this issue where all the thumbnails in the iTunes Store are blank, but it otherwise loads. I would take a look at the Wi-Fi settings of the router to see if it are setup with the recommended options for iOS and Mac OS X:
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    If the issue persists, you should also test the device(s) with another Wi-Fi connection to help isolate it further.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Save as local file path is greyed out for certain t.codes

    Hi All,
    After the ECC upgrdation, Save as local file path is greyed out for certain t.codes, while for other excel file export is not automatic.
    ES. for MB51 Transaction, when I try
    Path to save as local file is " System>LIST>Save---> Local file and I choose format Spreadsheet it appears format file txt, while with old release was XLS.
    Thanks

    I would like to known if the Additional Data button in MM02 should be custom. Us not possible to use standard?.
    Suggest to open a new thread for your query related to MM02
    Regards,
    Nick Loy

  • Mountain Lion purchased from Mac store will not download. 'Downloading' simply stays greyed out for hours.  Nothing I do changes it.  I am running OS 10.6.8 on a 2010 Mac Mini.  What do I do now?

    Mountain Lion purchased from Mac store will not download. 'Downloading' simply stays greyed out for hours.  Nothing I do changes it.  I am running OS 10.6.8 on a 2010 Mac Mini.  What do I do now?

    If you are looking at the front page of the App Store and you are seeing the "downloading" message on the right under Quick Links.
    Try this... Go into the "Purchases" section in the top bar of the App Store find ML in the list you are presented with. Does it say Resume? If so click the button and it will change to Pause. You may have paused it previously and forgot.
    If not then do as Csound1 suggested and simply wait for it to finish
    Jerry

  • For XD01, Sales area data tab greyed out

    Hi,
    User has XD01,XD02,XD05,XD06,XD07,XD99.when user tries to use XD01 with parameters customer,sales org, dist channel and division when go to customer : sales area data screen,sales area data tab is greyed out.It shouldnot be greyed out.what is the cause of it.user has proper authorization for SD.

    Hi,
    Try with OBD2 tcode...
    Also, make sure that while creating customer, you enter sales org., dis channel, & division....
    Regards
    Edited by: SAP2020 on Jan 27, 2010 11:08 AM

  • What do i do if all my options for video chat are greyed out for ichat?

    I have been using video chat for a long time and have never run into this problem. On ichat i am only able to access the audio options and not the video options, am not able to even check off the Camera Enabled or anything to do with my camera, as it is greyed out.... HELP?

    Go to http://www.ni.com/devzone/idnet/default.htm and check the links under the Learn and Develop sections. All of the tools are there for creating native LabVIEW drivers.
    Unless your customers would want an IVI or 'plug and play' driver, then you don't need any other software. For this, you would need to write the driver with LabWindows/CVI. This would be a benefit for anyone not using LabVIEW such as CVI, VB, C++, etc.
    To provide support, you should probably provide the driver in at least 7.0 and 8.0 format but you're going to have to judge who your potential customers are and what versions of LabVIEW they currently have. If the DAC/ADC combo requires DAQmx, that automatically eliminates LabVIEW 6.1 or lower.

  • ITunes 11 - Get Info greyed out for movies on external drive

    With iTunes 10, my itunes movies and TV shows grew to about 1.2TB of data, and I shifted them to an external drive.
    I was able to edit the information via 'get info' until upgrading to iTunes 11.
    Now all the information, bar the 'five stars' field are greyed out. If I shift a particular movie back to the internal drive, I can edit (genre, for example). Shift away again, get info greys out.
    Any advice? It feels like iTunes thinks it has the wrong permissions.

    When you add a movie to iTunes you have to make sure it makes a copy of the file in the iTunes Media folder.  Otherwise, you can't edit any of the information on the movie or video.
    In iTunes 12, go to Edit-->Preferences
    In Preferences, go to Advanced and make sure the "Copy files to iTunes Media folder when adding to library".
    Unfortunately, you will now have to re-import the movie files into iTunes using "Add File To Library..." Once imported, the movie will sometimes appear under "Home Movies" instead of "Movies" but if you right click on the movie file it will list a menu item called "Get Info" where you can change the "Options" to "Movie". 
    Hope that helps.

  • What is the Compatibility Tab grayed out for applications on some network shares, but not others?

    I have a network share with an executable file located in it. If I browse to the share by UNC path from a Windows 7 pro workstation and go to the compatibility tab of the .exe, the options are grayed out.
    I have another network share with an executable file located on it. This share and workstation are at a different location, unrelated to the first example. If I browse to the share by UNC path from a Windows 7 pro Workstation and go to the compatibility
    tab of the .exe file, the options are not grayed out, and I can check or uncheck what ever I need to.
    Both shares are located on a Server 2008 R2 system w/sp1. Both workstations are joined to the same domain as the server they are connecting to the UNC path on. Both shares have given the user connecting full access on the smb sharing and ntfs sharing.
    Someone please tell me how to make the compatibility tab not grayed out. Here is a screen shot of the comapatibility tab of the .exe file from both shares:

    Hi,
    You can use
    Troubleshoot compatibility to set the application to Compatibility Mode. 
    You can right-click the application’s shortcut and click Troubleshoot compatibility.
    Please refer to the similar thread and the third-party article below:
    Compatibility mode greyed out on exe that is on a mapped drive???
    http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/compatibility-mode-greyed-out-on-exe-that-is-on-a/03c93e47-3d66-485c-b28f-73d06bc793d5
    Windows 7: Compatibility Mode
    http://www.sevenforums.com/tutorials/316-compatibility-mode.html
    In addition, since it is related to windows 7, you can ask in the forum below for further assistance if the issue persists:
    Windows 7IT Pro Forums:
    http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro
    Best regards,
    Susie
    Thanks, but I read that link before I posted this. Even by running the compatibility wizard, you still can't edit the compatibility settings on Windows 7.

  • Firewall tab greyed out in System Preferences - have I been hacked?

    Hi,
    I am running 10.4.11. In System Preferences, under Sharing, the Firewall tab is greyed out, suggesting my firewall is not running or has been tampered with.
    So I did some poking:
    brendan% sudo ipfw show
    02000 844220 100107534 allow ip from any to any via lo*
    02010 0 0 deny ip from 127.0.0.0/8 to any in
    02020 0 0 deny ip from any to 127.0.0.0/8 in
    02030 0 0 deny ip from 224.0.0.0/3 to any in
    02040 0 0 deny tcp from any to 224.0.0.0/3 in
    02050 388115 29754604 allow tcp from any to any out
    02060 690200 900600320 allow tcp from any to any established
    02065 0 0 allow tcp from any to any frag
    02070 0 0 allow tcp from any to any dst-port 123 in
    02080 0 0 allow tcp from any to any dst-port 135 in
    02090 0 0 allow tcp from any to any dst-port 8135-8137 in
    02100 0 0 allow tcp from any to any dst-port 21 in
    02110 0 0 allow tcp from any to any dst-port 500 in
    12190 0 0 deny log tcp from any to any
    20000 0 0 deny log icmp from any to me in icmptypes 8
    65535 92033 23684897 allow ip from any to any
    Does this look suspicious? I also tried:
    brendan% /usr/libexec/FirewallTool
    Firewall Tool: Error, sysctlbyname(net.inet.tcp.blackhole): 1
    Firewall Tool: Error, sysctlbyname(net.inet.tcp.loginvain): 1
    Firewall Tool: Error, sysctlbyname(net.inet.udp.blackhole): 1
    Firewall Tool: Error, sysctlbyname(net.inet.udp.loginvain): 1
    Firewall Tool: Error, sysctlbyname returned: -1
    Firewall Tool: Error opening socket
    Firewall Tool: Error 1, Error setting up V4 Firewall!
    Firewall Tool: Error opening socket for V6!
    Firewall Tool: Error 1, Error setting up V6 Firewall!
    Should I be concerned? Am I being paranoid?
    If I want to reset and restart my Firewall, how do I do that, if the tab is greyed out in System Preferences?
    If I want to load a backup copy of my firewall configuration, what file do I need to copy from my backup disk? There is no /etc/firewall.conf on my system.
    Thanks.

    As I recall, if you do any sort ipfw stuff in command line under Tiger, that that made Sharing > Firewall gray out. Try doing a sudo ipfw flush then see if that lets you reconfigure from Sys Prefs.
    This article discusses Tiger's default firewall settings with web sharing turned on. That will give you a start in seeing what you should have on. This article may help a little, too, if you are running services or have certain softwares doing different things (gaming, etc.)
    Hope this helps some; sorry I can't help you more.

  • Extensions tab greyed out, yet extension manager indicates the extensions are enabled

    Recently downloaded trial version of photoshop cc (wanted my extensions to work before I purchased subscription), I also downloaded extension manager cc.
    I installed a particular extension called Kubota Action Dashboard, it is enabled in the extension manager.
    For some reason though when I open photoshop cc the extensions tab is greyed out and cannot be clicked on.
    Any idea why this is the case? Why is the extension recognised in extension manager but not photoshop itself?
    Thank you for any assistance

    To answer my own question, it appears to be an issue with the maker of the extension and not with the adobe products.
    Just found this. It's probably the same with other extensions too, the developers just have to catch up.
    System Requirements
    MAC:
    Mac OS X 10.5 or higher
    Photoshop® CS5, 5.5, 6, and CC (not compatible with CC 2014 at this time)

  • RSS "Open all in tabs" greyed out.

    On RSS feeds "Open all in tabs" seems to ALWAYS be greyed out.
    It works fine on other bookmarks, so it is NOT this bug:
    https://support.mozilla.org/en-US/questions/950762
    I have lived with this bug for a loooong time since an update, I think it was around FF13.
    It is greyed out on ALL machines I know of... I have seen the bug on several machines with completely independent bookmarks, seen on multiple windows versions
    Tried all tricks and NONE worked. Just tried to start in safe mode (did not help) tried to start in safe mode and reset EVERYTHING - but the bug persists.
    Googling the bug gives thousands and thousands of hits, so this is still an existing bug NOT related to add-ons.
    The reset saves the bookmarks, so I guess the bug MIGHT be found inside the bookmark-database corrupted at some upgrade.
    If this is not a bug, but an intentional removal of a function, then it should be hidden not greyed.

    Thanks for the quick response. :)
    I added the not too fantastic
    OPEN ALL IN TABS 1.0.rev698
    that adds the function back in a slightly awkward way.
    ....But why not keep it as an About:config option?
    But even better would be to replace it with "Open all UNREAD in tabs"
    :-)

  • Select option greyed out for fields of custom DataSource (rso2, rsa6)

    Hi
    Why are several fields, in my custom DataSource (created in rso2) not available for select?
    I do not think this is a permission issue, since several fields are selectable, but not all fields.
    It is not the data type, since I see other custom DataSources that have the same data type, and it is selectable as a select option.
    This is not a DataSource that was provided by SAP, it is completely custom, and uses a custom data definition (defined as a structure via se11), and a custom function.
    I have read the responses to similar questions, but have not found an answer that explains how to make the field selectable for select.
    What determines which fields can be selected for selection, and which fields have this option greyed out (not selectable)?
    I have come across multiple answers, for similar questions, that suggest an abap program to directly update table roosfield.
    Is this safe?
    IF I choose this route will I need to run the update program on production, or will the change it makes to my dataSource transport with my transport?
    (I can test this).
    What I most need to know is If this suggestion is safe, or if it has side effects?
    Thank you

    Hi Eileen,
    In Least case to enable the selection for the fields with the below program:
    Below code is for your reference which will use to unhide objects in RSO2 or RSA6 for Data source( in code for BELNR, KUNNR, VBELN, BUDAT fields are unhiding for 0fi_ar_4 data source selection option) . Still need any clarifications let me know.
    SE38: Create a program for ref below code.
    REPORT ZNP_SELE_DS.
    tables: ROOSFIELD.
    UPDATE ROOSFIELD SET SELECTION = 'P'
    WHERE OLTPSOURCE = '0FI_AR_4' AND   OBJVERS = 'A' AND FIELD = 'BELNR'.
    UPDATE ROOSFIELD SET SELECTION = 'P'
    WHERE OLTPSOURCE = '0FI_AR_4' AND OBJVERS = 'A' AND FIELD = 'KUNNR'.
    UPDATE ROOSFIELD SET SELECTION = 'P'
    WHERE OLTPSOURCE = '0FI_AR_4' AND OBJVERS = 'A' AND FIELD = 'VBELN'.
    UPDATE ROOSFIELD SET SELECTION = 'P'
    WHERE OLTPSOURCE = '0FI_AR_4' AND OBJVERS = 'A' AND FIELD = 'BUDAT'.
    Thanks & Regards,
    Srinu.Rapolu

  • Photoshop CC tools not accessible & drop down menu commands greyed out for no apparent reason.

    Hi... I've been having this issue with Photoshop CC recently where in the middle of editing an image file all of a sudden none of the tools work.  When looking at the drop down menus most of the commands are greyed out, except for a few.  When looking at the image box, the filename at the top is greyed out.  I can't even choose to quit photoshop as this option is greyed out. I can do things like toggle through the "Change Screen Mode" (F Key), and when i select a tool it's icon appears on the screen, but I can't apply it.  After about 5 minutes it seems to correct itself & I can go on working with the image.
    Anyone else experiencing this?

    Well, that could indicate a dialog box appearing somewhere in the background or off screen, not even necessarily from PS itself. Also of course check the option for the restore data and incremental saving. Perhaps you are just seeing that...
    Mylenium

  • Artwork button greyed out on imported CD.

    I just imported AC/DC's Black Ice off CD. When I attempted to add the album cover (from a picture I snagged online), the Artwork button is greyed out. I don't have this issue with other songs on iTunes. Does anyone know if this is an issue with iTunes (and how to fix it) or with some copyright protection on the CD.

    You probably ripped the CD using the wrong file format. MP3 and AAC support album artwork, but some other formats do not. You can change your Import Settings under Preferences->General.

Maybe you are looking for