AS 10g Discoverer EUL Upgrade

I have installed App Server 10g and as such the Discoverer server requires the repository to be at 5.0.1.x. My current repository is 9.0.4.43.15.0. How can I upgrade this to? What Disco Admin version shall I use? My current disco admin is from the iDS CDs for version 9.0.2.0.1. Please advise.
Thanks!
Karen Olszyk

Don't know if this will help...
My PRODUCTION version is 4.1.44.
I created an EUL via admin using the version 5.
Once 10g was released, I had to delete the EUL5_ EUL that I had created earlier and re-convert my version 4 to 10g version of Discoverer. (Works great now!)

Similar Messages

  • How to install 10g Discoverer on 11.5.10 solaries application server

    Can some one help me in giving step by step installation of 10g Discoverer on 11.5.10 application server.This is on Solaris 5.9.
    The metalink note 313418.1, seems to be little incomprehensbile.
    IF any one has practically installed & documented , please disclosed it.
    It will be more easy
    Naveen

    Before you going to install Make sure The Following Things
    1 Whether you going to upgrade Discoverer 4i into 10g
    2.Whether you going to install 10G on seperate oraclehome or a server.
    If you select second option you make sure wherther you plans to implement SSO to access the Discoverer or not.Can you tell me your plan.
    Depend upon your plan i will send the steps.
    Thanks
    senthil

  • Discoverer EUL Maintenance from Apps

    Hello
    To add setup changes and also key accounting and descriptive flexfields into Discoverer I think we need to regenerate the EUL views by running certain concurrent programs in Apps.
    On checking, I see 2 programs Discoverer End User Layer Maintenance, 1 for Financials Intelligence and 1 for Purchasing Intelligence. Are these the ones?
    Does anybody know about all the Apps concurrent programs to refresh Discoverer EULs with changes?
    Thanks
    Sanjib Manna
    Oracle Practice
    IBM Business Consulting

    well ... I hope they got their solution as it was over a year ago according to the original date of the post 8-)
    It sounds like you're talking about the BIS views in Oracle Apps. If so, yes, there's a process you run in Oracle Apps - as a particular user - to regenerate the BIS views in the database - and to pick up changes you've made in desc. flexfields, key flexfields, etc.
    Once done, the views in the database will be the correct 'generated' ones. However, you now have to bring the defintions into Disco EUL.
    You log into Disco Admin - and this is important - GO IN AS THE CORRECT USER who owns the database view (can't remember, but I think it's the account / responsibility that just did the regen in Apps). If you don't go in as the correct user (ie: you go in as a Disco EUL Admin, the owner of the EUL, sysadmin, etc.) - you're hosed. When you perform a refresh (and of course, don't check what changes it's talking about), then you'll lose all your views in the EUL (don't ask how I know this!).
    When you're in as the correct person, you perform a refresh on all BIS business areas, Disco Admin will compare your EUL's definition of the views vs the fancy, new ones in the database and add the columns (or may take away if so, old ones) to the ones in the EUL.
    However - just a note - if you're using a newer version of Oracle Apps (ie: including patches thay may have been done) than the last time you brought the BIS views into the EUL, you obviously won't see any new BIS views in the database that may have been added in the new version. The regen will compile them for you, but as you're performing a refresh, you may miss some hot, new, fantastic, save-the-company, views.
    That's a different story and one where you might want to make sure that the .eex file (that comes with upgrades and many patches) is the newest one used in the EUL when importing BIS view definitions.
    Sounds like fun ...
    Russ

  • Comand line: EUL upgrade error

    Hi All,
    I am running the following from command line...
    dis51usr.exe/connect user1/pswd@prod1 /opendb test_ap /sheet test_ap_sheet /batch /export xls c:\carlson\1.xls
    But It doesn't create the export file output at the given path.
    If i try to run the partial command:
    dis51usr.exe/connect user1/pswd@prod1 /opendb test_ap /sheet test_ap_sheet
    It pops up the disco Desktop and gives the following error:
    You must upgrade your EUL tables to use this software release. Please contact your discoverer manager.
    Please help, it's urgent.
    Thanks...

    It sounds like your Discoverer EUL version is out of sync with the Discoverer client software that you are using to connect. Are you connecting to a 4i EUL with a 9i client?
    Can you find out what Discoverer EUL version you have...?
    You can see the Discoverer client version by clicking on "About.." in Discoverer Desktop and Discoverer Admin when the log in box pops up.
    Maria

  • Discoverer Server Upgrade

    Subject: Discoverer Server upgrade
    Hi,
    A question on Discoverer Server upgrade. Currently we are running out Discoverer server and Datamart on the same 9i database. But now we want to move on Discoverer server to a different 10g database but keep our datamart on the old 9i DB. I was wondering if this is possible and if the work that has already being done in Discoverer will work once the discoverer server is moved to a new database. Currently we are using 3i but plan on upgrading our discoverer version to 10 g later.
    Please let me know if I didn't explain the scenario properly.
    Thanks.

    Hi,
    You won't be able to use Discoverer 3i with a 10g database.
    Rod West

  • ERD for Discoverer EUL tables

    Does anyone know if Oracle supplies an ERD for the Discoverer EUL tables. I would like to have such a thing to generate reports about system use etc.

    Hi Russ
    How are you doing?
    I'm afraid Oracle considers that to be proprietary information and is concerned over folks being able to reverse engineer the product hence they won't give away the inner workings of the EUL.
    However, they did allow me to publish some of the workings in my Discoverer 10g Handbook which are printed in Appendix A.
    In reality, if folks get hold of and install the EUL5 end user layer that is supplied on the Discoverer Admin CD it is not too hard to decipher most of what is going on.
    Best wishes
    Michael

  • Oracle DB 10g to 11g Upgrade

    Hi,
    We have a SAP Oracle Database, the size is 1.5 TB.
    The Hardware details are
    Application – SAP ERP 6.0 EHP5 SPS6
    Database – Oracle 10.2.0.2
    OS Platform – AIX 5.3 TL05, SP06
    HW – 8 Dual Core CPU’s, 256 GB RAM on DB-CI server
    Test Environment : 32 GB RAM
    Please from your experience let me know how much time will a 10g to 11g upgrade will take.
    Regards,
    Narayan

    hi,
    There are several parameters you have to check before upgrading. Commonly it is independent of size of database.I think it will take as minimum 1 hour. Check the links to speed up upgrading and to consider pre-upgrade preparation:
    https://blogs.oracle.com/UPGRADE/entry/how_long_will_your_upgrade_tak
    http://www.oracle.com/technetwork/database/upgrade/best-practices-for-upgrading-11gr2-174946.pdf

  • Oracle 10g discoverer and report services installation issue

    Hi
    Could some one help me in finding the solution for the problem while installing oracle 10g discoverer and report services installation ..
    at configuration assistants the opmn configuration failed..
    could some one suggest the possible solution for this problem.
    thanks

    at configuration assistants the opmn configuration failed..additional clues may exist within log file.
    Edited by: sb92075 on Aug 29, 2010 7:19 PM

  • Changing the port number in 10g Discoverer- Middle Tier & Infrasctructural

    Earlier I had insalled 10g discoverer which incudes both Middle Tier & Infrastructural Tier with default port numbers.
    Now i would like to change the default port numbers to other port numbers. This is because , i am got to do another discoverer installation with default port numers.
    In this case i have one question. Is it required to change all the port numbers that exist in the file "portlist.ini" of both Middle Tier & Infrastructural Tier.
    What change still i need to do in Oracle 11i application front.
    Thanks
    Naveen

    I did troubleshooting to verify the group, but this just changed the port number back to the default in the listener.ora & tnsnames.ora.
    So I did all the steps again to change the port number from the default to another - via lsnrctl status, i see that the new port number is being used, I can also log in to the database via Toad using the new port number, in v$parameter i see that the local_listener is registered on the new port number....only under the Fail Safe manager, the port number (under listener parameter) has not changed....it still shows the default port number. Anyone know how to change this???

  • Discoverer EUL Workbooks - Query Statistics, Workbooks Queried By User

    Hi there.
    I've just ran Discoverer EUL workbooks and found out a nice functionality on one of those queries. It's on EUL Query Statistics workbook, "Workbooks Queried By User" worksheet (and others).
    If you take a look at the "Worksheet Usage" column, you'll notice that there's an effect that looks a lot like a "progress bar". According to the times that worksheet was used, this bar advances or retract.
    I noticed it's a calculated column, but when I try to edit it, it shows no more than COUNT_DISTINCT("Date & Sheet"). I got a little confused on how this COUNT_DISTINCT shows that "progress bar"....
    So... how can I implement this on my DM queries?
    TIA.

    You need Desktop. When you format the data, there is a check box to show graphical bars. This option is not available in Plus, but the bars will show up when the report is displayed in Plus.

  • How to install 10g discoverer and integrate it with R12

    Hi,
    We want to install 10g Discoverer.
    As we can't install discoverer alone, i have downloaded IAS 10g.
    Which option i need to select to install Discoverer?
    Thanks,

    Hi,
    I was able to install Discoverer 10g successfully.
    Changed the profile options of Discoverer and tried to access it from R12.
    But getting below error.
    A connection error has occurred.
    - OracleBI Discoverer was unable to complete the connection initialization.
    - Attempt 1. CORBA protocol : 0 of 1 processes started. Hint: An administrator can further diagnose connection problems by running the "checkdiscoverer" script under <ORACLE_HOME>/discoverer/util.
    The checkdiscoverer script output is like this. Please check.
    ========================
    Initializing ORB...
    ORB initialized successfully.
    Checking for Discoverer "ServicesStatus"...
    "ServicesStatus" is running.
    Checking the adminstrator set soft limit on no. of sessions ...
    Current value of soft limit = 50 sessions.
    Hint: Administrators can increase the soft limit on Discoverer sessions by modif ying
    "//ias-component[id='Discoverer']/process-type[id='SessionServer']/process-set/@ maxprocs" attribute in the file /a01/distest/OraHome_1/opmn/conf/opmn.xml
    Checking for Discoverer Preferences component...
    Found Discoverer Preferences component.
    Binding to Discoverer Server...
    0 of 1 processes started.
    Error: Failed to bind to Discoverer Server.
    Hint: Try increasing the timeout by changing the timeout value in opmn.xml.
    Checking that the machine has only one network card...
    Yes.
    ===========================
    Thanks,

  • Install 10g discoverer with EBS R12

    Hi,
    I want to install 10g discoverer with EBS R12,
    Please send me any document and steps needed to install and configure it?
    Thanks,
    Kavitha

    Pl follow the steps in MOS Doc 373634.1 (Using Discoverer 10.1.2 with Oracle E-Business Suite Release 12)
    HTH
    Srini

  • Disco 10g discoverer and OWB

    Currently We plan to use disco 10g discoverer (web based). We have installed oracle application server but for some reason we cannot have portlet right now. so my question is without running lineage.sql(because we cannot get OWB database DAD, default one is portal30), can we still maintain hierarchy which generated from OWB? Or whether we can get someway to know OWB DAD?
    thanks....

    Database Providers must be registered in OAS, under the "Providers" Tab.
    You'll be able to maintain your hierarchies, no worries!
    Marcos

  • How to create a multilanguage Discoverer EUL

    Hello,
    Is there a way to build a multilanguage Discoverer EUL without having to support two EULs ?
    Regards,
    Myriam

    Dear All,
    Do any one knows what all are the configuration required to show report in arabic?
    I have issue in showing parameter prompt.
    Arabic prompts are showing as question marks when I am saving from discoverer plus. Junk characters when I am saving from discoverer desktop.
    please help.
    With Regards,
    Sheeja Anil

  • Discoverer EUL and workbook documentor

    Recently, my current client asked me if there was any easy way to document all the EUL information in one file. I generated the below pdf document
    Check this http://www.appsbi.com/discoverer_eul_snapshot_report.pdf
    Sample Discoverer EUL and Workbook Generated Document,
    but before I present this to my client I would like your opinion on whether the document is presentable, does it have all the necessary information, any flaws, any suggestions?
    Thanks
    Nilesh
    http://www.appsbi.com

    I have played a bit with info-captor, but to no great detail.
    I agree it boils down to ease of use and ease of maintenance, but proficiency with a development tool also has a big part to play in it. Where I would choose reports or even Disco, you chose Infocaptor, and others would use yet another tool. Client requirements also play a part in it as well - mine wanted a PDF available from their intranet. So I am pushing the pdf out of OR, and making it available on the web. If they had wanted a dashboard, or something a bit more interactive, then OR was not going to be the appropriate tool.
    As I mentioned in my previous post - it is a slick looking report. But as Michael commented, it looks to be directed more to an admin than an end user (which may be fine depending on the audience).

Maybe you are looking for