AS 10G emctl is died and leaves orphan and hung to emagent

We start infrastructure and middle tier in the following way for each instance:
opmnctl startall
emctl startifdown iasconsole
After a few minutes or hours the emctl died leaving the emagent hung up, impossible to kill them and the service http://host:1810 are not available, the only way is boot the system.
AS 10g 9.0.4 / Solaris Sparc 8 64bits.
Pls, any help are welcome!
Tx in advance,
Diego.

?

Similar Messages

  • My first problem is that I have no apps on my iPod desktop. The second is that my battery died, and despite being able to charge it, it is unable to restart back up.

    My first problem is that I have no apps on my iPod desktop. After using my computer to install something onto my iPod 5, it somehow disconnected. When i restarted the iPod, some apps (Safari, FaceTime, Game Center, App Store, iTunes Store, Camera, and some others disappeared. Apps like Flashlight and Jetpack Joyride which I had previousyl downloaded from the App Store were still there. I wanted to get the aforementioned apps back, so i decided to back-up my iPod to iTunes. The downloaded apps weren't able to be backed up ("authentication problems") but some apps like Tips, Video, iBooks, Reminders, Stocks, Settings, Voice Memos, were backed up. I then proceeded to factory reset the iPod, deleting everything and starting it as a new iPod. Once I finished this, I looked my desktop to see everything was gone, absolutely everything. I double-pressed the home button, showing Settings was open, but that's it. I opened settings and factory reset it again, this time choosing to restore from a backup. After doing this, I found the iPod looked the same as the last time i reset it - blank. If I scroll down the middle of the screen to bring up a search bar, I can find only the apps I backed up (Tips, Video, iBooks, Reminders, etc.) That is the first MAJOR problem. I was getting really frustrated, so I opened up iBooks and discovered I can download a could free books from the store, which was essentially the only thing I can use the iPod for. There were no videos in the Video app, and pressing the "Go to Store" button did absolutely nothing. No lag, it just ignored my touch. Once i found a few books, I decided to start reading. Eventually, i brought this iPod somewhere to read it, and didn't bring the charger with me. The battery died, and when i got home, tried charging it.
    Which brings me to the second problem. A minute or so after I plugged in the charger into the dead iPod, the Apple logo came on. But the iPod never started up. The logo stayed there, getting dimmer after a minute, but no vanishing even after fully charging or pulling out the charging cord. It didn't leave even after hours, but by then the battery died again. If i press and hold the power button and the home button at the same time, the Apple logo disappears. But I can't get into recovery mode utilizing the volume buttons. If i hold the power button when the screen is blank, the Apple logo comes back. But the iPod cannot start up.
    After everything was wiped, i was pretty angry. But I still had books to read, even if i couldn't do much else. Then the battery died, and it really wrecked me up. I feel so mad right now, although this actually happened about 4 days ago. The iPod being wiped happened about 3 days after the Christmas holidays began. This iPod also was not brand new, I bought it off a friend who had it for over a year, although it was in perfect condition (Obviously out of warranty.) I desperately need a solution to this HUGE problem. Due to personal reasons, I can't go to a Genius Bar or go to an Apple retailer in person, but communicating by E-mail is an option, as is instant messaging.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar
    The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
    Thus, if you get it to work restore to factory settings/new iPod, not from backup                               
    You can redownload most iTunes purchases by:        
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • My 16b 3gs was working perfectly.  The battery died and I plugged it in correctly to charge and it also neohook up to itunes for restore.  It also had a little exclamation button that reads: IMEI:unknown and just below it read ICCID: Unknown. Nothing else

    My 16gig ipone 3gs was working perfectly since it was replaced only a month or to prior.  I was visiting with some friends around the ole pipe and low and behold the phone was completly dried of it's go juice.  One we noticed I reached into the kitchen and plugged it in to the outlet.,,,  The battery died and I plugged it in correctly to charge and it also said Emergency calls only in various foriegn languages. It also said to plug it into your itunes. All the while haviing no calling options to say the least.  I followed the apple instructions perfectly when it said that there was a new version of itunes I should download first, prior to refreshing it.  It went through all of the installing and so on then at the end you still get a useless phone that doesnt work.  IMEI: unknown and ICCIC; unknown (both of which can be found by you on the box or on the sim card case.  I  completley removed the sim card and it worked in my hubbies 3g.   I tried several times and also AT&t had made sure the imei and iccic where correct.  So I spent hours getting nowhere with this.  Its new and nice and broken.. Im going to leave that Apple store with a brand new iphone 4 tomorrow.  Simply b/c it is for my pain and suffering and for giving me a crappy refurbished phone.  Fair is fair.  So if you've found a way to fix great, but Im going to get that free iphone 4  xoxo  toodllloooo

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar
    The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
    Thus, if you get it to work restore to factory settings/new iPod, not from backup                               
    You can redownload most iTunes purchases by:        
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Phone died and I put it on the charger and the red light keeps flashing.

    Phone died and I put it on the charger (wall charger) and the red light keeps flashing. It's been doing that for a little less than an hour, I pulled the batttery twice & get the same light flashing. I also read othe posts and it says to just let it charge for a few hours but i don't think it's gonna work. If you know anything about it let me know please & thank you.

    When connected to the charger, is the "no battery" symbol showing?
    Leave the device to charge 2-3 hours, and then, still connected to the USB cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage). If it doesn't reboot on the first attempt, leave it several more hours. I've had one charge for two days before it came back to life after an extreme battery depletion. Every 3-4 hours, with the device still connected to the charger, you can remove and replace the battery to see if it reboots.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Problem starting 10g emctl process

    Hello -
    I installed 10g on Sun Solaris and I'm trying to start the EM process as follows:
    $ emctl start dbconsole
    but am getting the following error:
    "OC4J Configuration issue. /ora/app/oracle/product/10.1.0/oc4j/j2ee/OC4J_DBConsole_DBA01_iwdev not found"
    I do have a folder in the abover directory named OC4J_DBConsole_DBA01_ora10g. I've tried to rename this folder to the one above, but it did not work.
    Thanks in advance for any ideas.

    I had a similar problem and solved it following suggestions in Doc 658341.999 on Metalink.

  • Battery has died and am not sure why

    Hi, my macbook battery has completely died and I cant work out why, I accidently let it run to empty and now when it only works when connected to the adaptor and the battery icon in the top right simply has a X in it and it doesnt register that theres a battery there. The battery is securly fastened and wasnt removed at all before this happened, Ive taken it off and wiped the connectors, but there was no obstruction of anykind and its not been near water or anything. Can any one help, will I need to take it to an apple store or is there something else I can do? Many thanks
    PS in the 'power' section of the 'more info' bit it simply reads:
    Battery Information:
    Charge Information:
    Charge remaining (mAh): 0
    Fully charged: No
    Charging: No
    Full charge capacity (mAh): 0
    Health Information:
    Cycle count: 0
    Battery Installed: No
    Amperage (mA): 0

    weird. I don't know what to say.
    it doesn't matter if you leave it to die because no matter what it should work.
    I'm a student with a low health battery caused from constant use so my laptop dies completely 5 times a day and the battery still works for 4 years.
    leaving the battery to die should be a problem.
    the X definitely means your battery is dead. this could have been caused by a sudden electric shock, maybe while you were away. since you already cleaned your battery it means it is still dead. get a new one.
    p.s. Merry Christmas to you all!!!

  • Probably asked and answered a million times but my laptop died and my boyfriend and i are now sharing a computer when i went to back up my contacts i ended up with all of his! Is there a way to get them off and how do i prevent this from happening again?

    probably asked and answered a million times but laptop died and my boyfriend and i are now sharing a computer when i went to back up my contacts i ended up with all of his? Is there a way to get them off without deleting each one? Also how do i prevent this from happening again? can someone direct me to some info on multiple phones on one itunes i am lost.

    Hey there 79usma79!
    I have a couple of articles for you that can help you troubleshoot the issues you are seeing with iTunes on Windows XP. The first is a general troubleshooting article, which can be found right here:
    iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/TS1421
    This article can help you find out if there are any conflicts between your copy of Windows XP and iTunes, and can tell you what to do if there are. Before going down the troubleshooting route though, you should take a look at this article, which can help you back up your entire iTunes library to an external hard drive, so if this issue is recurring, you will be able to restore from that backup and will not have to worry about losing your playlists or music again:
    iTunes: Back up your iTunes library by copying to an external hard drive
    http://support.apple.com/kb/HT1751
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • PC hard drive died and I have replaced it.  Need to import the music on my iPod, but get a message that it's synced with another library (old hard drive).  How do I import the music onto new hard drive? Senuti's just for macs.No old hard drive to copy.

    My PC hard drive died and I have replaced it.  Need to import the music on my classic iPod, but get a message that it's synced with another library (old hard drive).  How do I import the music onto the new hard drive? Senuti (one respondent's suggestion) is just for macs. I have no old hard drive to copy to the new hard drive (another respondent's suggestion.)

    See this older thread from another forum member Zevoneer on different ways to copy music from your iPod back to your PC.
    https://discussions.apple.com/thread/2417169?start=0&tstart=0
    B-rock

  • My battery died and then when i charged the phone it is asking me to connect to itunes and restore. if i restore how can i get my data back

    My iphone battery died and on charging the phone it asked me to connect to itunes and restore the phone.
    If i restore the phone how can i get my data back and how can i check when i last backed up my phone

    If you have been syncing regularly as the iphone is designed, then you can sync the data back.
    Regardless you will have to restore the iphone.

  • My computer died and I have a new one. How do i Authorize my new computer to synch the content of my iPod?

    My computer died and I have a new one. How do i Authorize my new computer to synch the content of my iPod?

    Authorization
    iTunes Store- Authorize or deauthorize your Mac or PC.
    In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.

  • My 5th gen. ipod died and they replaced it with a new one, but I'm having problems getting the music. An error message says that its not authorized on this computer. The ipod is synced but it wont let me add what music I want.

    My 5th gen ipod died and apple replaced it with a new one. I synced it up to the itunes that I already have on my computer but an error message keeps coming up telling me that its not authorized on this computer. What do I do?

    About iTunes Store authorization and deauthorization
    iPod: Troubleshooting songs and audiobooks that won't play
    iPod does not play content purchased from the iTunes Store

  • PC died and in turn my main iTunes library. iPhone was synced to it. Now when I try to connect to another library it tells me the phone must be wiped clean before I can manage music with new library. Any way around that? Don't want to lose music.

    My PC died and in turn so did my main iTunes library.  My iPhone was synced to the library that is gone.  Now when I try to connect to another library, it tells me the phone must be wiped clean before I can manage music with new library.  Any way around that?  I don't want to lose the music that is on my phone.  I am looking for a way to tell the phone to "forget" the old library and let me start working with a new library. 

    It has always been very basic to always maintain a backup copy of your computer for just such an occasion.
    Use your backup copy of your computer to put everything on the new one.
    It sounds like you have failed to do this, which is not good at all.
    You will have to transfer your itunes purchases from your iphone.  Authorize your computer for your itunes account 
    About iTunes Store authorization and deauthorization
    Open itunes, plug in iphone, do NOT sync, click File>Transfer Purchases
    When you do sync you will lose your pics ( photo library - synced from your old computer), your itunes content ( music, apps, videos,etc) , your contacts and your calendars.  So do NOT sync yet.  This is why a backup copy is so important.
    Enter one unique contact and calendar entry on your computer.
    When you first sync, you should get the option to merger the data.  Choose it.
    If you want your pics, then you will need to e-mail them to yourself before you sync.  They will not be of the original quality as they are reduced when synced to iphone.
    When all is as goos as it can be, then backup your computer, and always maintain the backup.

  • How do i move ipod nano content to a new Windows computer?  My old computer died and when i try to sync to itunes on my new Windows computer, it says it will erase what's on the ipod.  I can't seem to de-authorize the old computer (it's been recycled).

    Hi, I'm an ipod newbie, and unsure of what product i have-i believe it's an ipod nano, but can't seem to find any info on itunes that will identify my product.
    how do i move ipod nano music to a new Windows 7 computer?  My old computer died and when i try to sync to itunes on my new Windows computer, it says it will erase what's on the ipod.  I can't seem to de-authorize the old computer (it's been recycled).  Does this mean I have to start all over and read in my CD's into itunes?  seems very inflexible/inelegant...
    thanks for your help, sorry if this question has already been answered before!

    Is there no ANSWER TO THIS PROBLEM?

  • I had an HP laptop with Itunes on it and kept my library on an external hard drive. I had a 160gb classic Ipod.    My computer died and i am buying a new one (mac is out of budget)    When I get my new computer, obviously I will download Itunes. My Ipod s

    I had an HP laptop with Itunes on it and kept my library on an external hard drive. I had a 160gb classic Ipod.
    My computer died and i am buying a new one (mac is out of budget)
    When I get my new computer, obviously I will download Itunes. My Ipod still has all the music on it and the external hard drive is ok.
    I don't want to "erase" or lose any information when I sync with a new itunes that is "empty"
    What are the steps? After I download Itunes and set the folder location to my external harddrive what is next? Will Itunes recognize my IPOD? Will it load the music/list from my ipd or external into itunes?
    Thanks in advance

    The following user tip is worth checking through:
    Recovering your iTunes library from your iPod or iOS device

  • HT204074 How can I transfer music from my iPad to my iPod. I no longer have a Pc. It died and cannot be restored. It had iTunes with my entire music library on it.

    How can I transfer music from my iPhone to my iPad.?
    I no longer have a PC. Mine died and cannot be restored. It had iTunes with my entire music library on it.

    If you are running an OS of 5.0 or higher, you should be able to use the iCloud to sync both devices together & share music.

Maybe you are looking for

  • Enable s-video and/or multiple displays on ThinkPad with Windows 7

    I have a T41 Think pad notebook. I now have Windows 7 Professional 32 bit. I want to use the s-video output to transfer video to a TV and watch it there. I connect the s-video cable but cannot find how to get the s-video output enabled or get a secon

  • How to listen to an audio file (that's not a podcast) in this app

    I have some foreign language learning audio files that I'd like to use the "back 15" button feature of this app. They're not part of a podcast. I haven't found another app that does has this "back 15 seconds" feature, so I'd like to play these files

  • Creation of condition records in FV11

    Hi,      When we using transaction FV11 and giving condtion type say for example JMIP, it populates the following key combination to select from: Plant/Vendor/Material Country/Plant/Ctrl code/Material Country/Plant/Ctrl code Country/NBM-NCM Code Plan

  • Control date fields in Maintenance Order

    Hi experts, I need to implement a control between the dates of operation of the maintenance order (NTANF and NTEND) and the dates of the header of the order (GSTRP and GLTRP) with an error when saving. Can you suggest me a BADI or an exit? Thanks a l

  • I can't find where to export info about tracks that I recorded

    I have done it before but now I don't find it. I can still do it can't I?