AS 4.5 & Wireless LAN

On the recommendation of my wireless carrier, I upgraded to 4.5 from 4.2 and then the problems began.  Now, everytime I sync it knocks out my desktop's wireless connection.  After a while I learned to create a system restore point but forgot over the w/e and now my PC's is w/o internet. Verizon has basically told me (after hours and hours on the phone) that it's my problem.  can anyone help me?
Post relates to: Treo 700wx (Verizon)

In your configuration for connection select option "Always Ask" not Automatic !
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Similar Messages

  • HP Officejet 6500, Windows XP and 7, wireless LAN security code is not accepted

    The security code of my wireless LAN is not accepted by the HP6500A. According to the diagnostic software of HP a code consisting of more than 50 characters is required (the total number of characters can not be identified because the code isgoing on out of the window). The security code of the route consists of 12 characters. Resetting the printer is not solving the problem.
    This problem was identified after rinstalling the software after problems with printing: connection with the printer was identified; message: "busy with printing", but no printing result at all.

    Security codes can be in ASCII or HEX.  I'm guessing that the diagnostics is reporting HEX and the printer entry is in ASCII. 
    You can try running the diagnostics SW on the Windows 7 computer.  It might return the key in ASCII.
    A good option is to get the password from somewhere other than the diagnostics.  Maybe you stored it somewhere or wrote it down?  Once you get it try to enter from the front panel.
    Can I get a little information from you?
    What router brand model?
    What security mode are you using (WEP, WPA, WPA2)?
    Which model of the 6500 do you have (6500 or 6500a)?
    Please mark the post that solves your problem as "Accepted Solution"
    Sometimes it takes several posts back and forth to get to a solution - please be patient.
    I am employed by HP

  • Weird lost access to iMac's desktop via Airport Extreme wireless LAN

    This is weird and complicated. I'll try to keep it simple.
    1. Two computers on a wireless LAN via Airport Extreme: G4 Powerbook and 20" G5 iMac. The LAN has worked flawlessly and seamlessly for several years, and except for this ONE anomaly, still does.
    2. When logged-in to the iMac from the Powerbook, all its files and contents show up normally in it's networked-drive window in Finder,
    3. EXCEPT the desktop. And I mean the real desktop which is under my ID under USERS.
    4. Searching the Powerbook from the iMac, however, works just fine and shows all of the Powerbook's contents.
    Repairs of Permissions on both computers have accomplished nothing.
    There is one other peculiar symptom: there was a .wmv movie file sent me by a friend, and I had a copy of it on the desktops of both computers. It sat there, showed up and ran just fine, until one day something curious happened:
    The file would show up in the column-view Finder window of the iMac's desktop when I opened it from the Finder Window, but would, after about a second, disappear!
    If I try to import, on the Powerbook, some random file into the iMac's Desktop folder, it appears for a brief second and then the folder once again displays as empty.
    I have trashed that wmv file, and yet sometimes its name blinks up on the iMac's desktop list (that is, again, the column view display in the Finder window).
    This is profoundly weird.
    Oh, and there's nothing changed or weird about the SHARING settings. Personal File Sharing is enabled on both computers, as is Printer Sharing, and itunes music sharing is also enabled. All of these continue to work just fine. Firewall is enabled, but always has been.
    Owen

    Well, when in doubt try all the obvious things FIRST!
    I rank Disk Utility from the install disk, did a disk repair, and, well, Bob's your uncle, and all is fine again. Apparently that ghost file screwed up the count of files (I'm not sure what that means, but it seems consistent with a file that would materialize and then disappear, and screw up display of a folder's contents - the folder it was lurking-in invisibly.
    Very peculiar, none the less.
    Owen
    I'll leave this open for another day, if only to see if someone has an explanation for what may have happened, since that might be useful to others, besides satisfying my own curiosity.

  • Remote System Explorer on a Wireless LAN

    On a wireless LAN when I use Remote System Explorer, it knocks our Fieldpoint network modules off-line. We are unable to ping them. Once we restart the units, they work fine until someone uses the Remote System Explorer again. Any ideas?

    We have FP1600s and FP2015s. It only affects certain FP1600s. Firmware revision is 3.0 on the 1600s. Some older ones are not affected and some newer ones are. We configure them in the shop on a LAN, then move them to a field environment. The only firewall is point of entry onto the post.
    When using Remote System Explorer (the latest and greatest version), one at a time is "knocked off line". Every time Remote System Explorer refreshes another 1600 is knocked off line. I see no relevance to a crossover cable. This occurs over a WLAN. If we don't use Remote System Explorer then they just chug along fine.
    I have used the FP1600 Diagnostic Utility which was a mistake. Now the status LEDs blinks red 7 times.

  • Lenovo Yoga 13 Downgrade to Windows 7 Wireless Lan Driver & USB3.0 Driver

    Hey guys,
    I have purchased the Yoga 13 in U.A.E in last Feb. with AED4,999.00
    But some programms does not work with Windows 8. So I am using Windows7 with multi-boot.
    Guess you guys also have such problem.. eventually finding out the WIFI Driver & USB3.0 Driver.
    Now, I have succeeded in installing both of them.
    1. Wireless Lan Driver : Realtek RTL8723A Wireless LAN 802.11n USB 2.0 Network Adapter.
       The way I found this driver is... Download all the REALTEK driver in a designated folder.. of course uncompressed.
       And then using the contraol panel... updated the driver with the designated folder.
       Now it is working very well.
    2. USB3.0 Driver
      It was an easy game. I just have downloaded thee Intel USB3.0 Driver for Windows7... you could find it through google with easy.
      And just installed it. It works very well.
    => You could download the file at http://me2.do/xKBVnWo3
          (just put password : 4321 )
    If you guys have problem with above issues... or need the file let me know with my mail at xxxxxxxxxxx
    Anyhow, there are still two drivers I couldn't find.
    Jerry Bong
    Moderator note; e-mail address removed to stop the spambots getting it

    hi jerrybong,
    Thank you for Sharing this,
    This will really Help most of Yoga 13 users and Windows 7 fans,
    Kudos for this!
    Can you also let us know what are drivers you're still missing? Can you post the Hardware ID of those maybe we can help,
    Thanks and Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Windows 8 and Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC

    Hi!
    I hava a Toshiba L650 - 107 PSKI JE and I am having a problem with the my wireless network adapter on windows 8.
    My network adapter is Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC and works fine on windows 7. Two days ago I formatted my hard drive and install windows 8. The problem is that for much drivers I keep installing, The wireless keep turned off. There's no way I can move the slide from off to on.
    I already tried a lot of drivers from toshiba and from realtek but doesn't work.
    I went to see the Network Connections (Control Panel > Network and Internet > Network Connections) and the Ethernet is fine, I connect a cable and it is fine, but wi-fi says "Not connected".
    How do I solve this problem?

    Satellite L650-107 (PSK1JE-00P003EP)
    Downloads here. 
    A computer from Portugal? (Specifications attached.)
    This driver should work on Windows 8.
       Realtek Wireless LAN Driver
    But your problems may be more fundamental. Prior to loading Toshiba-specific programs, you probably need to install something like this.
       Toshiba System Driver - Windows 8 beta
    And for the function keys to work, you'll need still another Toshiba utility.
    -Jerry
    Attachments:
    satellite_l650.pdf ‏3264 KB

  • Wireless LAN does not work after restart

    Hey
    My brand new laptop suddenly went blank earlier today and when I restarted it I noticed my wireless internet won't work. It is also asking me to install some new driver, the Network Controller? I am confused as everything was working fine and suddenly it's not. Anyone any ideas? :-/

    Hi,
    maybe you should try to install the driver for your wireless lan card. I mean, if some application damaged the driver or installed something which interferes with the wireless lan card then you should try to fix it with an reinstallation of the driver.
    Heres a [LINK|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp] to the drivers download page from Toshiba. Pick your model and your operating system and download the driver which fits for your wireless lan card.
    Greets

  • Warning page on Cisco Wireless Lan Controller for guest access

    Hi,
    We have an Cisco wireless LAN controller 4400 in our organization, and lots of guest using our Wi-Fi network.
    I would like to configure a warning and terms and condition page when guest using first time our network.
    Can you please let me know is that possible without adding external web server and how to configure.
    Many Thanks in Advance
    Amit Sharma

    Hi Amit,
    Hope you are doing great!!
    the below link will help you in getting the issue resolved!!
    http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a00809bdb5f.shtml
    Please dont forget to rate the usefull posts!!
    Regards
    Surendra

  • What are the following:1)Cisco 1600 Series IOS WIRELESS LAN RECOVERY. 2)Service Provider Option 60 for Vendor Class Idenfier

    What are the following:1)Cisco 1600 Series IOS WIRELESS LAN RECOVERY. 2)Service Provider Option 60 for Vendor Class Idenfier
    These items are listed with 1600 series AP but I'm unable to understand what are these things & the use of them

    DHCP Option 60:  Go HERE.

  • Issues after changing the AP Name on Wireless LAN Controller

    I recently changed the AP Name of all the Wireless Access Points in my branch office (which are all associated to the branch office Wireless LAN Controller(s)). After that I noticed that all branch office employees are unable to connect to the employee SSID. The employee SSID uses web authentication and employees are authenticated using Head Office AD via Cisco ACS, both located at the Head Office.
    There are other SSID's on the WLC which all work fine, but only employee SSID which uses AD authentication does not work. AD authenticaion is working fine because employee's in HO are successfully able to connect to the employee SSID at HO.
    The branch office is connected to the HO via a tunnel link. We noticed that if we restart both the ASA at either ends of the tunnel. The employee SSID starts working again but only temporarily for a day or so... what could be the issue? Can renaming the AP's cause issues? How can I fix this problem?
    Thanks in advance

    Thanks Elliott,
            I did the debug like you said and I am getting the following debug messages:
    *apfMsConnTask_0: Jun 20 08:18:14.580: Deleting the client immediatly since WLAN is changed
    and also
    *apfReceiveTask: Jun 20 05:25:11.857: 00:1f:3c:86:af:15 Orphan Packet from 192.168.52.34
    The logging on the WLC shows
    *apfReceiveTask: Jun 18 17:56:41.788: %MM-1-ANCHOR_UNAVAILABLE: mm_mobile.c:2155
    All export anchors are down. Cannot anchor the client.00:c0:a8:f3:cd:ae
    The DHCP pool for the employee users are configured on a guest WLC which sits behind an ASA

  • Wireless Lan PCI card Ralink- System Preferences Network Configuration HELP

    I just bought a PCI Wireless Lan Card for my G5 tower.
    Specifically the card i bought is:
    http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=220500089785&ssPageName=STRK: MEWNX:IT
    It is a Ralink - www.Ralinktech.com
    I installed the driver. Both the card and the driver show up in the System Profiler.
    BEYOND THIS I AM CLUELESS!

    PCI Is at the top of the list. it says NOT CONNECTED next to it. But. Where it says status it says: "STATUS: Cable unplugged" ( and underneath) "The cable for PCI Ethernet Slot 4 is not Plugged In."
    What cable??
    Configure is set to "Using DHCP"
    As i said before. in system profiler it shows up in the correct slot and the driver is installed.
    Ralink has its own software that pops up too called WirelessUtilityCardBusPCI. Without me doing anything, my router name shows up on its list so it does recognize it. But connecting to the internet i cannot do nor getting it to come up in System Prefs. Anybody Mess with WirelessUtilityCardBusPCI?

  • Ipod break down wireless lan

    Hello everybody,
    i have a problem with my new iPod touch 4. I have a wireless network with 2 laptops and want to integrate my iPod. When I activate the wireless lan of my iPod and my laptop is on the net, everything is ok. If my laptop isn't on the net and I activate the iPod, the wireless lan breakdown. The Same presiture happens after while when both (iPod and Laptop) are on the net. The only thing what help, is to reboot the router and reset the networksettings of the iPod. Then when the Laptop is again on the net and I enter the wireless lan key for my network in the iPod I am again on with my iPod. But Apps and Music I can't download with my iPod. If I want to do that, I only get the load screen. The samething happens when my Apps want to log in the internet. But Safari works. On my Laptop I have Windows Vista. My Router is a T-Sinus 111 DSL. Has anybody a idea how I can get a firm wireless lan connection on my iPod.
    Thanks a lot for the Help

    Can't somebody help me? Please I am really despaired

  • Why does Satellite L300-10Q not recognise a wireless lan

    This new laptop computer is working ok on a wired LAN but does not recognise a Wireless Lan. Got message that no networks can be found. In the same room with another Toshiba Laptop the wireless LAN is found and has a good signal strength.
    The switch for wireless LAN is turned on and "antenna" pictogram led is burning red.
    Seems that it is not configurated for detection. Any Idea how to solve this?

    Thanks for your reaction. But on the other working laptop several wireless access points can be "seen" in the area and on this laptop none. When wanting to contact a LAN it constantly refers to not a network cable connected and no wireless LAN access points can be seen unfortunately.
    The system it works on for both laptops is Vista Home edition premium. Checked if the system was not set on "off line" working; what else can be checked to know that automatic detection is set and that the system is looking for the wireless points ?
    greetz Tim

  • Satellite L300-15V - The system cannot install Wireless LAN driver

    After installed all drivers for that machine, the system shows that it need to install Wireless LAN driver, but i did!!! What's going on? Help! I can't make wireless net home!!!!!!

    I assume you have tried to install the Realtek WLan driver. Is it right?
    Go to this Toshiba WLan driver page:
    http://aps2.toshiba-tro.de/wlan/
    and check if you can install the Atheros Wireless LAN driver or the Intel PRO/Wireless 3945/4965/5100/5300 driver.
    Greets

  • Satellite Pro M30: Wireless LAN/ZeroCfgSvc MFC Application

    Whenever i turn on the wireless lan switch an error msg appears " ZeroCfgSvc MFC Application has encountered a problem and needs to close.
    What shall I do?

    Hi
    I have read on some websites that a new wireless driver update could solve this issue.
    Try to download the new wireless update from the Toshiba website:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
    or from the Intel website:
    http://downloadfinder.intel.com/scripts-df-external/Support_Intel.aspx
    Check also this site:
    http://forums.divx.com/groupee/forums/a/tpc/f/221101651/m/693108652
    http://www.neuber.com/taskmanager/process/zcfgsvc.exe.html
    Regards

  • Why does my wireless LAN stop mid session

    I start up in the morning and everything is fine, but at some point during the day, my wireless LAN quits.  I've changed modems and routers but I still have the problem.  My provider sees nothing on his end and other computers on my home network work fine.  When I turn the wireless off and back on I get a new lease on wireless until it decides to do it again.  I'm running the latest OS X 10.8.2 (3.1 GHz Intel Core i5) with 4GB 1333 Mhz DDR3.  Has anyone had this problem and if so have you found the solution.  Thanks!

    From the menu bar, select
     ▹ System Preferences... ▹ Network
    Click the Assist me button and select Assistant. Follow the prompts. How far do you get?

Maybe you are looking for

  • How do I get my iPad to reflect the folders on my IMAC

    How do I get my IPAD to reflect the folders on my IMAC and so when I save something to a folder it gets saved on my IPAD too! thanks tim

  • What caused my kernal Panic?

    I wish i could read this and make sense of it, but I cannot. Interval Since Last Panic Report: 1408827 sec Panics Since Last Report: 1 Anonymous UUID: 1433A7C0-1FE8-4ACC-9C75-098BAA1B4028 Sat Nov 27 21:13:30 2010 panic(cpu 1 caller 0x2aab55): Kernel

  • A self documenting DSC Configuration wich contains all Resources

    One funny thing with PowerShell is allways: It can document himself. Inspired by Steven Murawskis video on Desired State Configuration (DSC) I have done a full Blowen full self documenting DSC Configuration: Not perfect but it works for the first sho

  • My itunes sync stopped working when I got the new iphone.  How to fix it?

    My Iphone 4 worked great.  It synced with my itunes perfectly. I;d buy a song on my computer and moments later it would also show up on my iphone.  I thought I configured all the boxes correctly when I got the new iphone but now the wifi sync feature

  • I'm new to Mac...newbie question

    If I backup my HDD with Time Machine, does it mirror everything? For instance, can I use Time Machine to back up my existing drive, and swap the backup with the original drive? Thanks.