As a abaper which module is good to give support

hi gurus,
As a abaper which module is good to give support.I got a job as a fresher,Now in my company the training will be started on all modules,our technical Head told us choose the modules like support(HR,MM,PP,FICO).so which module is better ,i dont have any idea about it.Pls suggest me.
Thanks & Regards,

hi,
there is nothing like only one is good because all the modules are integrated so we need to know all.
in ur case better go with the one on which u dont have much knowledge becse u can learn new subject.
anyways u will get knowledge on all with experience.
all the best.

Similar Messages

Which module is good in US market?

Hi, I'm not sure this is the correct place to ask this question. If i'm wrong i'm so sorry.
I have 5 years experience in Oracle PL/SQL and 2 years experience in Forms and reports. I would like to learn Oracle Apps. Some of my friends suggest me Oracle Financial module is better in US market. Can you suggest me which one is better to learn.
Thanks in advance.
KVN

Helios , Thanks for your answer. I'm planing to go with Oracle Apps Techno Functional. I have some knowledge in manufacturing but I'm confused between Manufacturing or Financial module because I don't want to learn a course which is not good in market. I'm in a critical position. I'm looking for a job in PL/SQL,forms and reports but i'm not getting many calls....so wanted to update my knowledge.
Edited by: user12307285 on Jan 31, 2010 3:47 PM

Which module SAP ABAP or SAP PS

Hi
I am Varun Maheshwari. I have done B.E in electrical and Electronics. I had experience of 1.8Yr in Project management as Project assistant in Centre for Wind Energy Technology(on Contract basis). My role was Planning of the project, Site selection- Pan India, Resource & inventory planning for installation purpose, Budgeting the project, Collection of the data and analysis, Report generation as per the analysis to the management and third party. I am willing to pursue career in SAP domain but i am really confuse between SAP domain (SAP PS or SAP ABAP) which will be good if you consider growth & opportunities.
Please guide me considering Market Scenario, Future Growth & Recruitment Opportunities?
I will be highly thankful to you !!
Regards
Varun Maheshwari

Hi Varun,
Since you already have almost 2 years of experience in project management, it is better to capitalize on this experience by choosing a career relevant to your experience. This experience counts when you go forward in the same area (Project management).
In SAP, for project management there are three tools serving different business processes.
1) SAP PS (Project Systems)
2) SAP PPM (Portfolio & Project Management)
3) SAP CPM (Commercial Project Management)
In general it is better to start with SAP PS and then later on with SAP PPM which has very good integration with PS.
Coming to your query on future growth/recruitment opportunities.. There are lot of job opportunities for SAP PS in the market.. Any project in any company in this world requires a tool to monitor & review the project progress. Considering this organisation may use either SAP PS / PPM / Microsoft project / Primavera. But definitely organisations using SAP uses SAP PS for project management. So in short, there is no shortage of demand for SAP PS.
Considering your experience, I have given my opinion and it finally depends on you to choose a career in which you have passion.
Regards,
Ravi

Which module under SAP is having much requirements in Software industries.?

Dear Friends,
I am into Software industry from more then 4 years. And i am good at Software skills like Java/J2ee and also im very good at HR Management where i am handling resources and clients more ever im in even into Business development/ Account Management.
My profile is a mixture of all the stuff ie technical and non-technical. So i am confused at this stage in thinking like which module is good as per my profile.. And i want to take up course/module which is very HOT in IT market as off now. I mean having more requirements in India/Abroad/UAE as well. ie probability of getting job should be more.
I am even ok to go for modules like SD,MM, etc which is different from my profile.
IM TOTALLY CONFUSED AT THIS STAGE. REQUESTING you guys to help me out to choose my module under SAP.
Regards,
Ahmed.

Based on your description, I think BI upgrades might be of interest to you.
But based on your other "contributions" to SDN, my opinion is that you should perhaps consider a career in the agricultural sector.
I do both, and it works quite nicely to balance things.
Cheers,
Julius

Is there any module in ABAP which requires almost zero percent of coding?

Hi all,
i just wanted to know if there is any module in ABAP which has zero percent of coding apart from functional modules like SD MM etc?
Regards
Sanjeev

ABAP is a programming language.
If you say reporting, bdc, sapscript, module pool, smartforms and ask if they need coding, the answer is yes. They require ABAP programming language for its coding.
Everything in SAP done not require coding. For a person working in SAP-BW there is substantially low necessity for ABAP codes. However it requires ABAP knowledge when working with Exits in BW.
SAP-XI mostly requires creating scenarios creating IDOCs, BDOCs and handling XML. This also has very little ABAP.
Reward points if helpful.

Which Module for Vocally challenged Inter C.A. Student

Hello,
My name is Gaurav Bidasaria. I completed my C.A. Inter but started working as a tech blogger instead. I learned web designing, app development and few other skills during those years. Primary reason for opting this line:
a) Interest in internet and related domain
b) Lack of oral communication (0%)
As far as my voice is concerned, it is partially impaired which means you will understand everything once you spend few days with me. You will also understand almost everything if you meet me the first time, however, I dont think I am suitable for meeting clients, explaining them technical aspects and getting feedback. Interaction with fellow workers will go along just fine.
I am looking for back office job for this reason. Which modules should I undertake? Also, I have heard that being a techno-functional pays good rewards in the long run. I am willing to put in effort, and I am really good at self-learning as I have learnt web designing and App development all by myself. So I am confident I can learn anything anywhere with little help.
I was thinking about going for FI/CO/ABAP/BI modules. Not sure though.
Please let me know if you have any queries or questions. Do not hesitate. Any help from your side might help me build my career.
Thank you for your time and efforts. Much appreciated.
Message was edited by: Colleen Lee - moving from Training space to Careers (more active space for this type of question)

Sravan,
You can test the web self-service just by launching the Web Dynpro PIQ_MBSS_OIF directly at first. The Student Role (delivered with EHP4) in the portal also includes it as part of the Service Map. The standard portal location is:
pcd:portal_content/com.sap.pct/specialist/com.sap.pct.isher.student.bp_folder/com.sap.pct.isher.student.roles/com.sap.pct.isher.student.student
I believe you need the following Business Package in your portal: BPISHERST03_0-10006146
-Michael

How to download ABAP(report,module pool...etc) source code to client PC?

hi guys,
please advise how can i download/export ABAP(report,module pool...etc) source code to client PC?
thanks.

hi
this report is to export to another server...
PROGRAM ZDOWNLOAD_SAP
LINE-SIZE 132
LINE-COUNT 62
NO STANDARD PAGE HEADING.
This program up / downloads from / to a local dataset
all the components of an ABAP - i.e TEXTS, the entire CUA
including statuses and menus, DYNPROS and source code.
Program documentation and variants are not handled.
INCLUDED programs are automatically handled both on upload
or download. INCLUDE selection can be excluded or generic
e.g only handle INCLUDES starting with ZIN*
INCLUDES within INCLUDES alos handled.
The only restriction is on UPLOAD the INCLUDED programs must come
from the same directory as the main program.
On Download of course the ABAP must exist in the library.
Note for LINUX and BATCH users
This program was originally designed as a one off tool for
getting ABAPS etc from a SAP R2 (IBM MVS mainframe system) into
an R3 test system minimising the need for a large amount of
mainframe sysprogs (anybody remember what they were !!) time
and support to say nothing of access problems from TSO /JES2 /
SAP R2. At that time network connections were patchy and the
transport systems largely incompatable and not very reliable.
This program was originally designed as a one off tool for
Must run on Windows front end ---- If you are running SAP with
LINUX on your work station you will have to change the WS_UPLOAD
and WS_DOWNLOAD functions to reflect the Linux file system. The
contents of the data sets themseleves do not need to be changed
Program can easily be modified to run in batch and store
the data on a UNIX host. Change the WS_UPLOAD and WS_DOWNLOAD
to read from and write to UNIX data sets (OPEN FILE etc).
You will also need to modify the parts of the program that get
the DOS directory and display the Windows file paths.
The actual abap data sets do not need to be changed.
Rel 4.0 names can now be up to 40 bytes long
Dynpros and CUA have changed from rel 3.1
Tabstrips now loaded and unloaded in dynpros
Please note restriction on 4.6 systems for users who
have ABAP names which include '/'s in their names.
Rel 4.6b, 4.6c Abap names can include the '/' in their names
e.g /CUST1/CUST2/ORDER
This causes problems when storing to a local file.
a solution is to change the name to %CUST1%CUST2%ORDER i.e / will
be changed to %. On upload the % should be changed back to /
again. This change still needs to be implemented.
If you don't use the / in the abap name then this is not a problem.
If file to be uploaded is in rel 3 format then names are only 8
bytes long.
program uses 3 datasets per abap
1) abapname.eee source, dynpr logic, texts, CUA stuff
2) abapname.hhh dynpr header
3) abapname.fff dynpro fields.
because of varying lengths and contents 3 data sets are used. The
complexity of combining all these to 1 data set would make the
program far too complex.
NOTE: This version of the program can only be used on
release 4.0 or higher. Once an ABAP has been converted
to rel 4.0 it cannot be converted back to rel 3.0
on a release 3/3.1 system. Release 4 CUA tables
are different. Use release 3 version of this program
for releases 3.0 and 3.1. Available on SAPFANS website.
Note that data to be uploaded must have been previously downloaded
by this program (any version since rel 2.0) - except for Initial
Load -- see end of these comments.
Dynpros and CUA statuses have changed since rel 3.1
This program will handle rel 3.1 format on upload but will
download in rel 4.0 format. To upload 3.1 format specify an 'X'
in the rel3 parameter.
If you have downloaded components in rel 4.0 format and you
want to re-load to a 3.1 system you will have to load
the source via standard upload and re-create dynpros and the CUA
manually.
As names can now be longer than 8 characters you can only
use this program if the SAP front end (SAPGUI) supports
long file names (WIN 95/98 or WIN NT). Windows 3.x will not
work as the underlying DOS system cannot handle long file names.
UPLOAD function and DOS directory.
When an ABAP is selected for UPLOAD then the DOS
directory is read into a table. A file called ABAP.BAT is created,
and down loaded to the 'C' drive and executed.
This file executes a DOS DIR command and pipes the output
into a dataset which is then uploaded into an internal
table on SAP.
Note on running DOS commands from ABAP
The first time this procedure is executed you will see a DOS window
which you will have to close manually. To get round this
use windows explorer to select the file ABAP.BAT and then
right mouse click on the file name. Select the
properties window. From this click the CLOSE on EXIT box. This
will then automatically close the DOS function after it has
executed. (Windows restriction).
The DOS function has not been tested using Windows 2000 so
it might not work. OK on W95,W98,WME and Windows NT (No Thanks)
If INCLUDE programs are wanted on UPLOAD only the specified
directory is searched.
Instead of entering path name manually you can click on
the path parameter. Because of Windows restriction you will
have to select ANY file in the relevant directory.
The path will then be copied on to the selection screen.
To do still : Merge 3 files to one and compress output to .ZIP file
fix 4.5 4.6 problem of abaps containing '/' in the name
possibility to automatically up / download referenced
function modules with selection criteria like INCLUDES
To load the ist time into a system.
Create program with ABAP editor and Upload the .EEE file.
Delete ist line (????SRCE) in the ABAP EDITOR --NOT THE DISK FILE
Delete all the source from the line that starts ????TEXT (towards
the end file) till the end so the last line in your source is ENDFORM.
DO NOT ALTER THE DISK FILE. DO THESE CHANGES IN THE ABAP EDITOR.
Save file and execute
Use following parameters (Note the ist time you won't get proper
text on the selection screen).
Function U
Path full dos path containing source e.g c:\abaps\
NOTE YOU MUST ENTER THE FINAL \ as above.
REPID the program name. e.g ZZJIMHXX
note that on the DISK you will see 3 files
ZZJIMHXX.EEE, ZZJIMHXX.FFF, ZZJIMHXX.HHH
just use the name before the dos qualifier - the
program will do the rest
ignore other parameters
The program will then load itself with all the texts etc.
It should now be ready for use.
Macros
DEFINE DEFINE_TABLE.
DATA: &1 LIKE &2 OCCURS &3 WITH HEADER LINE.
END-OF-DEFINITION.
DEFINE CLS.
REFRESH &1.
CLEAR &1.
END-OF-DEFINITION.
DEFINE INIT.
IF &1 NE SPACE.
SEARCH &1 FOR '. .'.
IF SY-SUBRC = 0.
WRITE '*' TO &1+SY-FDPOS(1).
ENDIF.
TRANSLATE &1 USING '*%'.
ELSE.
MOVE '%' TO &1.
ENDIF.
END-OF-DEFINITION.
end of macros
/ SAP standard tables */
TABLES: D020S, "Dynpro header
D020T, "Dynpro title
D021T, "Screen field keyword texts
TRDIR, "Attribute table
TADIR, "Dev. class etc.
EUDB, "CUA data
TSTC, "transaction data
TITLE, "CUA titles
RSMPTEXTS. "Function texts (rel 4.0)
/ Work tables to hold ABAP source etc, and dynpro */
/ contents. */
DATA: BEGIN OF H. "Header
INCLUDE STRUCTURE D020S.
DATA: END OF H.
DATA: BEGIN OF H1 OCCURS 10, "Header
NAME(40) TYPE C, "rel 4
NUMBER(4) TYPE N.
INCLUDE STRUCTURE D020S.
DATA: END OF H1.
DATA: BEGIN OF H2 OCCURS 0, "Rel 3 dynp. header
CNAME(8) TYPE C,
CNUM(4) TYPE C,
NNAME(8) TYPE C,
NNUM(4) TYPE C,
FILL(51) TYPE C,
CDAT(6) TYPE C,
CTIM(6) TYPE C,
END OF H2.
DATA: BEGIN OF F OCCURS 250. "Dynpro Fields
INCLUDE STRUCTURE D021S.
DATA: END OF F.
DATA: BEGIN OF F1 OCCURS 500, "Dynpro Fields
NAME(40) TYPE C, "rel 4
NUMBER(4) TYPE N.
INCLUDE STRUCTURE D021S.
DATA: END OF F1.
DATA: BEGIN OF OLD_F1 OCCURS 0, "Dynpro Fields (rel 3)
NAME(8) TYPE C,
NUMBER(4) TYPE C.
INCLUDE STRUCTURE D021SE_OLD.
DATA: END OF OLD_F1.
DATA: BEGIN OF F2 OCCURS 0, "Dynpro Fields (rel 3)
TFIL(284) TYPE C,
END OF F2.
DATA: BEGIN OF M OCCURS 3. "Match codes (if any)
INCLUDE STRUCTURE D023S.
DATA: END OF M.
DATA: BEGIN OF E OCCURS 0. "Dynpro Logic
INCLUDE STRUCTURE D022S.
DATA: END OF E.
DATA: BEGIN OF E1 OCCURS 0, "Dynpro Logic
NAME(40) TYPE C, "rel 4
NUMBER(4) TYPE N.
INCLUDE STRUCTURE D022S.
DATA: END OF E1.
DATA: BEGIN OF T OCCURS 0, "prog name and dynpro nrs
NAME(40) TYPE C, "rel 4
NUMBER(4) TYPE N,
END OF T.
DATA: BEGIN OF R OCCURS 56, "prog name and language
NAME(40) TYPE C, "rel 4
LANGUAGE(1) TYPE C,
END OF R.
DATA: BEGIN OF S OCCURS 3000,
TXT(180) TYPE C, "rel 4 was 132
END OF S.
DATA: BEGIN OF R1 OCCURS 50, "for include programs
NAME(40) TYPE C, "rel 4
INSTANCE(3) TYPE P,
END OF R1.
DATA: BEGIN OF S1 OCCURS 3000,
TXT(180) TYPE C, " rel 4 was 132
END OF S1.
DATA: BEGIN OF U OCCURS 100, "Text elements
TXT(180) TYPE C, " rel 4 was 132
END OF U.
DATA: BEGIN OF DIR. "ABAP Attributes
INCLUDE STRUCTURE TRDIR.
DATA: END OF DIR.
DATA: BEGIN OF DTXT. "Dynpro field keyword texts
INCLUDE STRUCTURE D021T.
DATA: END OF DTXT.
/ This data contains all the components of the */
/ CUA such as menus, statuses, Pfkeys */
/ As from rel 4.5 Tabstrips are automatically copied as well */
/ The rel3 parameter must be set however to load the */
/ correct version of the CUA tables if uploading rel 3 */
/ data to a rel 4 system. */
/ Rel 4.0B can convert 3.1 and earlier CUA's */
/ This could change later however. */
CUA Tables.
Key of CUA tables in EUDB data set. Name is len 40 in rel 4.0
DATA BEGIN OF EU_KEY.
INCLUDE STRUCTURE RSEU1_KEY.
DATA END OF EU_KEY.
Status
DATA BEGIN OF STA OCCURS 0.
INCLUDE STRUCTURE RSMPE_STAT. " rel 4
DATA END OF STA.
Functions
DATA BEGIN OF FUN OCCURS 0.
INCLUDE STRUCTURE RSMPE_FUNT. "rel 4
DATA END OF FUN.
Menus
DATA BEGIN OF MEN OCCURS 0.
INCLUDE STRUCTURE RSMPE_MEN. "rel 4.0
DATA END OF MEN.
Menus (texts)
DATA BEGIN OF MTX OCCURS 0.
INCLUDE STRUCTURE RSMPE_MNLT. "rel 4.0
DATA END OF MTX.
Action Bar
DATA BEGIN OF ACT OCCURS 0.
INCLUDE STRUCTURE RSMPE_ACT. "rel 4.0
DATA END OF ACT.
Push Buttons
DATA BEGIN OF BUT OCCURS 0.
INCLUDE STRUCTURE RSMPE_BUT. "rel 4.0
DATA END OF BUT.
PF-Keys
DATA BEGIN OF PFK OCCURS 0.
INCLUDE STRUCTURE RSMPE_PFK. "rel 4.0
DATA END OF PFK.
Function sets
DATA BEGIN OF SET OCCURS 0.
INCLUDE STRUCTURE RSMPE_STAF. "rel 4.0
DATA END OF SET.
Documentation
DATA BEGIN OF DOC OCCURS 0.
INCLUDE STRUCTURE RSMPE_ATRT. "rel 4.0
DATA END OF DOC.
Title codes with text
DATA: BEGIN OF TIT OCCURS 0.
INCLUDE STRUCTURE RSMPE_TITT. "rel 4.0
DATA: END OF TIT.
DATA BEGIN OF FTX OCCURS 0. "rel 4.0
INCLUDE STRUCTURE RSMPTEXTS.
DATA END OF FTX.
rel 3.1 CUA components.
Status
DATA BEGIN OF OLD_STA OCCURS 0.
INCLUDE STRUCTURE RSEU1_GEN. " rel 3.1
DATA END OF OLD_STA.
Functions
DATA BEGIN OF OLD_FUN OCCURS 0.
INCLUDE STRUCTURE RSEU1_FUN. "rel 3.1
DATA END OF OLD_FUN.
Menus
DATA BEGIN OF OLD_MEN OCCURS 0.
INCLUDE STRUCTURE RSEU1_MEN. "rel 3.1
DATA END OF OLD_MEN.
Menus (texts)
DATA BEGIN OF OLD_MTX OCCURS 0.
INCLUDE STRUCTURE RSEU1_TXM. "rel 3.1
DATA END OF OLD_MTX.
Action Bar
DATA BEGIN OF OLD_ACT OCCURS 0.
INCLUDE STRUCTURE RSEU1_ACT. "rel 3.1
DATA END OF OLD_ACT.
Push Buttons
DATA BEGIN OF OLD_BUT OCCURS 0.
INCLUDE STRUCTURE RSEU1_BUT. "rel 3.1
DATA END OF OLD_BUT.
PF-Keys
DATA BEGIN OF OLD_PFK OCCURS 0.
INCLUDE STRUCTURE RSEU1_PFK. "rel 3.1
DATA END OF OLD_PFK.
Function sets
DATA BEGIN OF OLD_SET OCCURS 0.
INCLUDE STRUCTURE RSEU1_SET. "rel 3.1
DATA END OF OLD_SET.
Documentation
DATA BEGIN OF OLD_DOC OCCURS 0.
INCLUDE STRUCTURE RSEU1_ETM. "rel 3.1
DATA END OF OLD_DOC.
Title codes with text
DATA: BEGIN OF OLD_TIT OCCURS 0.
INCLUDE STRUCTURE TITLE. "rel 3.1
DATA: END OF OLD_TIT.
dynamic function text
DATA BEGIN OF FDN OCCURS 1.
INCLUDE STRUCTURE RSEU1_FDYN. "not req for rel 4.
DATA END OF FDN.
Icons
DATA BEGIN OF FIN OCCURS 1.
INCLUDE STRUCTURE RSEU1_ICON. "not req for rel 4
DATA END OF FIN.
dynamic menu texts
DATA BEGIN OF MDN OCCURS 1.
INCLUDE STRUCTURE RSEU1_MDYN. "not req for rel 4.
DATA END OF MDN.
Symbol list
DATA BEGIN OF SYM OCCURS 0.
INCLUDE STRUCTURE RSEU1_SYMB.
DATA END OF SYM.
Status Short text
DATA BEGIN OF STX OCCURS 0.
INCLUDE STRUCTURE RSEU1_CTX.
DATA END OF STX.
Attributes for function key settings (menu bars) Rel 3.0
DATA BEGIN OF ATT OCCURS 0.
INCLUDE STRUCTURE RSEU1_HAT.
DATA END OF ATT.
Include-Menus
DATA BEGIN OF INC OCCURS 3.
INCLUDE STRUCTURE RSEU1_INC.
DATA END OF INC.
Last used numbers
DATA BEGIN OF LAST.
INCLUDE STRUCTURE RSEU1_LST.
DATA END OF LAST.
data for call transaction (SE41 to re-generate the CUA)
DATA: BEGIN OF T_BDC_TAB OCCURS 0.
INCLUDE STRUCTURE BDCDATA. "BDC data
DATA: END OF T_BDC_TAB.
DATA: BEGIN OF T_MESSTAB OCCURS 0.
INCLUDE STRUCTURE BDCDATA.
DATA: END OF T_MESSTAB.
/ Program data */
DATA: NUMBER(4) TYPE N,
OLDNUM(4) TYPE N,
FILESIZE TYPE I,
NR_OF_BYTES TYPE I,
I(3) TYPE P,
IX(3) TYPE P,
J(3) TYPE P,
L(3) TYPE P,
CUA-FLAG(1) TYPE C,
CUA_RETURN(10) TYPE C,
DYNPRO_MESSAGE(160) TYPE C,
DYNPRO_LINE TYPE P,
DYNPRO_WORD(30) TYPE C,
NUM(3) TYPE N,
DYNNAME(44) TYPE C,
FN1(128) TYPE C,
FN2(128) TYPE C,
FN3(128) TYPE C,
W_ITERATE(1) TYPE C,
MAIN(1) TYPE C,
FUNC(1) TYPE C,
OLDNAME(40) TYPE C,
OLD-FUNC(8) TYPE C,
NEW-FUNC(8) TYPE C,
FOUND(1) TYPE C,
LANGUAGE LIKE SY-LANGU,
FIRST-TIME(1) TYPE C VALUE 'Y',
OK-CODE(5) TYPE C,
NAME(40) TYPE C, "rel 4
TXLINE(70) TYPE C,
LINE(132) TYPE C.
DATA:
UL_FILE(128) TYPE C,
DL_FILE(128) TYPE C,
DOSLINE(72) TYPE C.
DATA: BEGIN OF DOSDIR OCCURS 0,
TEXT(72),
END OF DOSDIR.
DATA: BEGIN OF I_PROG OCCURS 0,
NAME(40),
END OF I_PROG.
DATA: BEGIN OF I_PROGT OCCURS 0,
NAME(40),
END OF I_PROGT.
DATA: BEGIN OF I_INCLUDE OCCURS 0,
NAME(40),
HANDLED(1) TYPE C,
END OF I_INCLUDE.
DATA: BEGIN OF I_INCL OCCURS 0,
NAME(40),
END OF I_INCL.
DATA: BUFFER(1024).
DATA: WINSYS(3).
DATA: GLOBAL_FILEMASK_MASK(20), GLOBAL_FILEMASK_TEXT(20).
DATA: GLOBAL_FILEMASK_ALL(80).
DATA: T_FILENAME(128),
TMP_FILENAME(128),
T_MODE(1),
FIELDLN TYPE I.
DEFINE_TABLE I_DYNPFIELDS DYNPREAD 0. "dynpro fields to be updated
DATA: I_FLDS LIKE HELP_VALUE OCCURS 0 WITH HEADER LINE.
FIELD-SYMBOLS: <F>.
/ Parameters */
SELECTION-SCREEN BEGIN OF BLOCK A1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS REPID FOR TRDIR-NAME OBLIGATORY .
PARAMETERS:
FUNCTION(1) TYPE C OBLIGATORY, "Function
DSNAME(40) TYPE C, "Data set name
INCLUDES(1) TYPE C DEFAULT 'N', "Resolve Includes
IMASK(40) TYPE C, "Include Mask
CLASS LIKE TRDIR-CLAS,
AUTHOR LIKE TRDIR-CNAM, "Author
APPL LIKE TRDIR-APPL,
PATH(88) TYPE C DEFAULT 'A:\',
REL3(1) TYPE C.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(70) TEXT-004.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(70) TEXT-005.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(70) TEXT-002.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(70) TEXT-003.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK A1.
/ Check users workstation is running WINDOWS, */
/ WINDOWS 95, or WINDOWS NT. OS/2 no good for */
/ this application. */
CALL FUNCTION 'WS_QUERY'
EXPORTING
QUERY = 'WS'
IMPORTING
RETURN = WINSYS.
IF WINSYS(2) NE 'WN'. "Win 3.X no good either
WRITE: / 'Windows NT or Windows 95/98 is required'.
EXIT.
ENDIF.
/ Get names of programs to be handled. */
/ Name can be a single value, many values or ranges */
/ as per standard SELECT-OPTIONS on selection screen */
/ On Download read TRDIR and store program names in a table */
/ as per selection options. */
/ On upload read the specified directory for all files of */
/ type .EEE from specified directory */
/ compare file names with selection criteria */
MOVE FUNCTION TO FUNC.
MOVE 'Y' TO MAIN.
CASE FUNC.
WHEN 'U'. "Upload required
PERFORM READ_DOS_DIRECTORY.
PERFORM GET_RANGE_UL. "Get list of progs to process
WHEN 'D'. "Download required
PERFORM GET_RANGE_DL. "Get list of progs to process
WHEN OTHERS.
WRITE: / 'Function not performed due to user request'.
EXIT.
ENDCASE.
SORT I_PROG.
DELETE ADJACENT DUPLICATES FROM I_PROG.
For download INCLUDE handling can be resolved via function
module call.
All Includes within Includes are also resolved by the function
module call.
Note that this method does not work if program itself is of type
I (it's an include)
In this case we can still search the source.
IF FUNC = 'D'.
IF INCLUDES = 'Y'.
PERFORM GET_INCLUDES_DL.
PERFORM PROCESS_INCLUDES_DL.
ENDIF.
ENDIF.
Program list from selection criteria i.e excluding INCLUDES found
LOOP AT I_PROG.
MOVE I_PROG-NAME TO R1-NAME.
APPEND R1.
DESCRIBE TABLE R1 LINES I.
WHILE I NE 0.
PERFORM EXECUTE-FUNCTION.
ENDWHILE.
REFRESH R1.
ENDLOOP.
We need to check now for INCLUDES on DOWNLOAD when the INCLUDE
program itself is of type I. In this case the function call
will not return the INCLUDES. For example we could be
downloading ZTESTTOP (an Include itself) which as an include
ZTEST01.
The process fortunately is the same as the UPLOAD function
except of course we need to read the library instead of the
DOS directory
process INCLUDE modules for Upload
On upload the procedure is more complex as Includes within
Includes can only be resolved by scanning the code and
searching if the program exists in the directory.
To get all INCLUDES within INCLUDES entries in table I_INCL
that do not exist in I_INCLUDE are copied to table I_INCLUDE
after each entire pass of table i_INCLUDE and table is then
re-looped through. Programs in table I_INCLUDE that have already
been processed have a "Y" indicator set in I_INCLUDE-AVAIL.
if func = 'U'.
IF INCLUDES = 'Y'.
DESCRIBE TABLE I_INCL LINES I.
IF I > 0.
W_ITERATE = 'Y'.
ELSE.
W_ITERATE = ' '.
ENDIF.
WHILE W_ITERATE = 'Y'.
PERFORM PROCESS_INCLUDES_UL.
PERFORM LOOP_THROUGH.
DESCRIBE TABLE I_INCL LINES I.
IF I > 0.
W_ITERATE = 'Y'.
ELSE.
W_ITERATE = ' '.
ENDIF.
ENDWHILE.
endif.
ENDIF.
DESCRIBE TABLE I_INCLUDE LINES I.
IF I > 0.
SKIP 1.
WRITE: / ' Included Programs found'.
SKIP 1.
LOOP AT I_INCLUDE.
WRITE I_INCLUDE-NAME TO LINE(40).
CONDENSE LINE.
WRITE: / LINE(80).
ENDLOOP.
ENDIF.
/ Table R contains ABAP names to up / download. */
/ Loop through table R and perform up / download */
/ for each program. */
/ Table R1 contains INCLUDE names found (if any) */
/ As each */
FORM EXECUTE-FUNCTION.
LOOP AT R1.
MOVE-CORRESPONDING R1 TO R.
APPEND R.
ENDLOOP.
REFRESH R1.
LOOP AT R.
REFRESH : T, E1, H1, F1, S, U.
PERFORM PROCESS.
MOVE 'N' TO MAIN.
ENDLOOP.
REFRESH R.
DESCRIBE TABLE R1 LINES I.
ENDFORM.
/ Build file names for UP/DOWNLOAD */
/ 3 files are generated per ABAP. */
/ 1) ABAP Path\PROGNAME.EEE (ABAP, Attr,Texts) */
/ Logic Path\PROGNAME.EEE (Dynpro Source Logic) */
/ CUA Path\PROGNAME.EEE (CUA components - keys etc) */
/ 2) Header Path\PROGNAME.HHH (Dynpro Header) */
/ 3) Fields Path\PROGNAME.FFF (Dynpro Field definitions )*/
/ ( If alternate file name specified -DSNAME- this will */
/ be used instead. This is only valid for the main program. */
/ INCLUDED programs will have file names as specified */
/ above). */
/ By using this scheme it saves the user from having to */
/ be prompted for 3 file names. */
/ If you want multiple copies / versions on disk either */
/ rename the old versions or specify a different directory in */
/ the path parameter. */
FORM PROCESS.
MOVE PATH TO FN1.
CASE MAIN.
WHEN 'Y'.
IF DSNAME NE SPACE.
WRITE DSNAME TO FN1+66. "rel 4
ELSE.
WRITE R-NAME TO FN1+66. "rel 4
ENDIF.
WHEN OTHERS.
WRITE R-NAME TO FN1+66. "rel 4
ENDCASE.
MOVE FN1 TO FN2.
MOVE FN1 TO FN3.
WRITE '.HHH' TO FN1+124(4). "rel 4
WRITE '.FFF' TO FN2+124(4). "rel 4
WRITE '.EEE' TO FN3+124(4). "rel 4
CONDENSE FN1 NO-GAPS.
CONDENSE FN2 NO-GAPS.
CONDENSE FN3 NO-GAPS.
NAME = R-NAME.
CASE FUNC.
WHEN 'D'.
PERFORM DOWNLOAD_OBJECTS.
CLEAR LINE.
WRITE : 'ABAP : ' TO LINE.
WRITE R-NAME TO LINE+8.
WRITE 'has been unloaded' TO LINE+55.
CONDENSE LINE.
WRITE: / LINE.
DESCRIBE TABLE T LINES I.
IF I = 0.
WRITE: / 'No Dynpros were found for unload function'.
ELSE.
WRITE: / 'The following Dynpros have been unloaded : '.
PERFORM LOOP_THROUGH_T.
ENDIF.
WHEN 'U'.
PERFORM UPLOAD_OBJECTS.
DESCRIBE TABLE T LINES I.
CASE I.
WHEN 0.
WRITE: / 'No Dynpros were found for restore function'.
WHEN OTHERS.
WRITE: / 'The following Dynpros have been restored : '.
PERFORM LOOP_THROUGH_T.
ENDCASE.
IF MAIN EQ 'Y'.
CASE OLDNAME.
WHEN SPACE.
CLEAR LINE.
WRITE : 'ABAP : ' TO LINE.
WRITE R-NAME TO LINE+8.
WRITE 'has been restored' TO LINE+55.
CONDENSE LINE.
WRITE: / LINE.
WHEN OTHERS.
CLEAR LINE.
WRITE : 'ABAP : ' TO LINE.
WRITE R-NAME TO LINE+8.
WRITE 'has been restored - original name :'
TO LINE+55.
WRITE OLDNAME TO LINE+92.
CONDENSE LINE.
WRITE: / LINE.
ENDCASE.
ELSE.
CLEAR LINE.
WRITE : 'ABAP : ' TO LINE.
WRITE R-NAME TO LINE+8.
WRITE 'has been restored' TO LINE+55.
CONDENSE LINE.
WRITE: / LINE.
ENDIF.
ENDCASE.
ENDFORM.
/ print progname + dynpro nrs that have been processed. */
FORM LOOP_THROUGH_T.
LOOP AT T.
CLEAR LINE.
WRITE R-NAME TO LINE.
WRITE T-NUMBER TO LINE+50.
CONDENSE LINE.
WRITE: / LINE.
ENDLOOP.
ENDFORM.
/ Download Objects */
FORM DOWNLOAD_OBJECTS.
PERFORM UNLOAD_ABAP. "ABAP source, texts, attr
SELECT SINGLE * FROM TRDIR
WHERE NAME EQ R-NAME.
IF TRDIR-SUBC = 'I'.
CASE INCLUDES. "Included file wanted
WHEN 'Y'.
PERFORM SCAN4-INCLUDES.
ENDCASE.
ENDIF.
PERFORM UNLOAD_CUA. "CUA stuff
PERFORM DOWNLOAD_DATA. "Download EEE file to PC
PERFORM BUILD_T. "Build table of all dynpros in ABAP
DESCRIBE TABLE T LINES I.
CASE I.
WHEN 0. "if no dynpros exist then cannot download any
PERFORM DOWNLOAD_DATA. "Download EEE file to PC
WHEN OTHERS.
PERFORM UNLOAD_DYNPROS. "Get Raw dynpros from SAP
PERFORM UNLOAD_DYNPRO_COMPONENTS."Convert to table
PERFORM DOWNLOAD_DATA. "Download ABAP etc. to PC
PERFORM DOWNLOAD_BIN_H1. "Download dynpro header
PERFORM DOWNLOAD_BIN_F1. "Download dynpro fields
ENDCASE.
ENDFORM.
/ Split ABAP up into its component parts */
/ A) Program source (72) */
/ B) Texts (132) */
/ C) Attributes (117) */
/ D) CUA stuff (Various) */
FORM UNLOAD_ABAP.
/ Get ABAP language. Only required on download. */
SELECT SINGLE * FROM TRDIR
WHERE NAME EQ R-NAME.
MOVE TRDIR-RLOAD TO R-LANGUAGE.
READ REPORT R-NAME INTO S. "Get source into table S
MOVE '????SRCE' TO S-TXT.
INSERT S INDEX 1.
/ Text elements, Numbered texts, headings, selection texts */
/ Read text elements with logon language. If they don't */
/ exist read with the value taken from TRDIR. */
READ TEXTPOOL R-NAME INTO U LANGUAGE SY-LANGU.
IF SY-SUBRC NE 0.
READ TEXTPOOL R-NAME INTO U LANGUAGE R-LANGUAGE.
ENDIF.
DESCRIBE TABLE U LINES I.
CASE I.
WHEN 0.
WHEN OTHERS.
MOVE '????TEXT' TO S-TXT.
APPEND S.
LOOP AT U.
MOVE U-TXT TO S-TXT.
APPEND S.
DELETE U.
ENDLOOP.
ENDCASE.
/ Retrieve Attributes from TRDIR and add to table S */
/ Change language to logged on language */
MOVE '????ATTR' TO S-TXT.
APPEND S.
SELECT SINGLE * FROM TRDIR
WHERE NAME EQ R-NAME.
MOVE SY-LANGU TO TRDIR-RLOAD.
MOVE-CORRESPONDING TRDIR TO DIR.
MOVE DIR TO S-TXT.
APPEND S.
ENDFORM.
/ retrieve CUA stuff and append to table S. */
FORM UNLOAD_CUA.
MOVE R-NAME TO EU_KEY-NAME. "Program name for CUA
MOVE 'D' TO EU_KEY-SPRSL. "CUA seems to want D as lang
MOVE R-LANGUAGE TO EU_KEY-SPRSL. "Language "rel 2.2
IMPORT STA FUN MEN MTX ACT BUT PFK SET LAST INC STX DOC "rel 2.2
IMPORT STA STX FUN MEN MTX ACT BUT PFK SET LAST INC DOC "rel 3.0
ATT FDN MDN SYM FIN "rel 3.0
FROM DATABASE EUDB(CU) ID EU_KEY.
IF SY-SUBRC NE 0. "No statuses
EXIT.
ENDIF.
read titles in logged on language. If not present use
language from TRDIR.
CASE REL3.
WHEN SPACE. "(rel 4)
SELECT * FROM RSMPTEXTS WHERE PROGNAME EQ R-NAME
AND SPRSL = SY-LANGU.
MOVE-CORRESPONDING RSMPTEXTS TO FTX.
APPEND FTX.
ENDSELECT.
IF SY-SUBRC NE 0.
SELECT * FROM RSMPTEXTS WHERE PROGNAME EQ R-NAME
AND SPRSL = R-LANGUAGE.
MOVE-CORRESPONDING RSMPTEXTS TO FTX.
APPEND FTX.
ENDSELECT.
ENDIF.
DESCRIBE TABLE FTX LINES I.
IF I > 0.
MOVE '????FTXT' TO S-TXT.
APPEND S.
LOOP AT FTX.
MOVE FTX TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
WHEN OTHERS.
SELECT * FROM TITLE WHERE PROGNAME EQ R-NAME
AND DDLANGUAGE EQ SY-LANGU.
MOVE-CORRESPONDING TITLE TO TIT.
APPEND TIT.
ENDSELECT.
IF SY-SUBRC NE 0.
SELECT * FROM TITLE WHERE PROGNAME EQ R-NAME
AND DDLANGUAGE EQ R-LANGUAGE.
MOVE-CORRESPONDING TITLE TO TIT.
APPEND TIT.
ENDSELECT.
ENDIF.
ENDCASE.
DESCRIBE TABLE STA LINES I.
IF I > 0.
MOVE '????STAT' TO S-TXT.
APPEND S.
LOOP AT STA.
MOVE STA TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE FUN LINES I.
IF I > 0.
MOVE '????FUNC' TO S-TXT.
APPEND S.
LOOP AT FUN.
MOVE FUN TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE MEN LINES I.
IF I > 0.
MOVE '????MEN1' TO S-TXT.
APPEND S.
LOOP AT MEN.
MOVE MEN TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE MTX LINES I.
IF I > 0.
MOVE '????MTX1' TO S-TXT.
APPEND S.
LOOP AT MTX.
MOVE MTX TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE ACT LINES I.
IF I > 0.
MOVE '????ACTN' TO S-TXT.
APPEND S.
LOOP AT ACT.
MOVE ACT TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE BUT LINES I.
IF I > 0.
MOVE '????BUTN' TO S-TXT.
APPEND S.
LOOP AT BUT.
MOVE BUT TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE PFK LINES I.
IF I > 0.
MOVE '????PFKY' TO S-TXT.
APPEND S.
LOOP AT PFK.
MOVE PFK TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE SET LINES I.
IF I > 0.
MOVE '????SETS' TO S-TXT.
APPEND S.
LOOP AT SET.
MOVE SET TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
IF LAST NE SPACE.
MOVE '????LIST' TO S-TXT.
APPEND S.
MOVE LAST TO S-TXT.
APPEND S.
ENDIF.
DESCRIBE TABLE INC LINES I.
IF I > 0.
MOVE '????INCL' TO S-TXT.
APPEND S.
LOOP AT INC.
MOVE INC TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE STX LINES I.
IF I > 0.
MOVE '????STXT' TO S-TXT.
APPEND S.
LOOP AT STX.
MOVE STX TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE DOC LINES I.
IF I > 0.
MOVE '????DOCN' TO S-TXT.
APPEND S.
LOOP AT DOC.
MOVE DOC TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE TIT LINES I.
IF I > 0.
MOVE '????TITL' TO S-TXT.
APPEND S.
LOOP AT TIT.
MOVE TIT TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
Next 5 tables are rel 3.0 specific (ATT, FDN, MDN, SYM, FIN)
DESCRIBE TABLE ATT LINES I.
IF I > 0.
MOVE '????VATT' TO S-TXT.
APPEND S.
LOOP AT ATT.
MOVE ATT TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE FDN LINES I.
IF I > 0.
MOVE '????VFDN' TO S-TXT.
APPEND S.
LOOP AT FDN.
MOVE FDN TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE MDN LINES I.
IF I > 0.
MOVE '????VMDN' TO S-TXT.
APPEND S.
LOOP AT MDN.
MOVE MDN TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE SYM LINES I.
IF I > 0.
MOVE '????VSYM' TO S-TXT.
APPEND S.
LOOP AT SYM.
MOVE SYM TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE FIN LINES I.
IF I > 0.
MOVE '????VFIN' TO S-TXT.
APPEND S.
LOOP AT FIN.
MOVE FIN TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
ENDFORM.
/ Upload Objects. */
FORM UPLOAD_OBJECTS.
PERFORM UPLOAD_EEE. "ABAP,texts,attr dynpro logic
DESCRIBE TABLE E1 LINES I.
IF I > 0. "Do dynpro components exist
PERFORM UPLOAD_HHH. "dynpro header
PERFORM UPLOAD_FFF. "dynpro fields.
PERFORM RECONSTRUCT_DYNPROS. "load + gen dynpros
ENDIF.
ENDFORM.
/ Build table containing dynpro names and numbers */
FORM BUILD_T.
SELECT * FROM D020S WHERE PROG EQ R-NAME.
T-NUMBER = D020S-DNUM.
T-NAME = D020S-PROG.
APPEND T.
ENDSELECT.
ENDFORM.
/ Split dynpros into constituent parts. */
FORM UNLOAD_DYNPROS.
MOVE 'Y' TO FIRST-TIME.
LOOP AT T.
REFRESH: F, E.
CLEAR: H, F, E.
PERFORM BUILD_HHH. "Dynpro Header
PERFORM BUILD_FFF. "Dynpro Fields
PERFORM BUILD_EEE_DYNP. "Dynpro Logic
ENDLOOP.
ENDFORM.
/ Header H length 284. */
FORM BUILD_HHH.
MOVE T-NAME TO DYNNAME(40). "rel 4.
MOVE T-NUMBER TO DYNNAME+40(4). "rel 4.
IMPORT DYNPRO H F E M ID DYNNAME.
MOVE T-NAME TO H1-NAME.
MOVE T-NUMBER TO H1-NUMBER.
MOVE-CORRESPONDING H TO H1.
APPEND H1.
ENDFORM.
/ Fields D021S Len 87. */
FORM BUILD_FFF.
MOVE T-NAME TO F1-NAME.
MOVE T-NUMBER TO F1-NUMBER.
LOOP AT F.
MOVE-CORRESPONDING F TO F1.
APPEND F1.
DELETE F.
ENDLOOP.
ENDFORM.
/ Dynpro Logic D022S E */
FORM BUILD_EEE_DYNP.
MOVE T-NAME TO E1-NAME.
MOVE T-NUMBER TO E1-NUMBER.
LOOP AT E.
MOVE-CORRESPONDING E TO E1.
APPEND E1.
DELETE E.
ENDLOOP.
ENDFORM.
/ Unload Constituent parts of dynpro. */
FORM UNLOAD_DYNPRO_COMPONENTS.
MOVE '????LOGC' TO S-TXT.
APPEND S.
LOOP AT E1.
MOVE E1 TO S-TXT.
APPEND S.
DELETE E1.
ENDLOOP.
FREE E1.
LOOP AT T.
MOVE 'N' TO FOUND.
SELECT SINGLE * FROM D020T "use logged on language
WHERE PROG EQ T-NAME
AND DYNR EQ T-NUMBER
AND LANG EQ SY-LANGU.
IF SY-SUBRC NE 0. "try original language.
SELECT SINGLE * FROM D020T
WHERE PROG EQ T-NAME
AND DYNR EQ T-NUMBER
AND LANG EQ R-LANGUAGE.
ENDIF.
IF SY-SUBRC EQ 0.
IF FOUND = 'N'.
MOVE '????DTIT' TO S-TXT.
APPEND S.
MOVE 'Y' TO FOUND.
ENDIF.
MOVE T-NAME TO S-TXT.
WRITE T-NUMBER TO S-TXT+8(4).
WRITE D020T-DTXT TO S-TXT+12(60).
APPEND S.
ENDIF.
MOVE 'N' TO FOUND.
SELECT * FROM D021T
WHERE PROG EQ T-NAME
AND DYNR EQ T-NUMBER
AND LANG EQ SY-LANGU. "logged on language
IF FOUND = 'N'.
MOVE '????DTXT' TO S-TXT.
APPEND S.
MOVE 'Y' TO FOUND.
ENDIF.
MOVE-CORRESPONDING D021T TO DTXT.
MOVE DTXT TO S-TXT.
APPEND S.
ENDSELECT.
CASE SY-SUBRC.
WHEN 0.
WHEN OTHERS. "try original language
SELECT * FROM D021T
WHERE PROG EQ T-NAME
AND DYNR EQ T-NUMBER
AND LANG EQ R-LANGUAGE.
IF FOUND = 'N'.
MOVE '????DTXT' TO S-TXT.
APPEND S.
MOVE 'Y' TO FOUND.
ENDIF.
MOVE-CORRESPONDING D021T TO DTXT.
MOVE DTXT TO S-TXT.
APPEND S.
ENDSELECT.
ENDCASE.
ENDLOOP.
ENDFORM.
/ Build the original dynpro component tables. */
/ Table H1 contains 1 entry for each dynpro. H1 contains */
/ the header for the dynpro prefixed by the program name */
/ and dynpro number. */
/ By looping round this table we can re-build the F */
/ (Fields) and E (Logic) components. By stripping off the */
/ program name and dynpro number the original tables are */
/ re-created. (Tables F1 and E1 also have a prefix of */
/ Program name and dynpro nr). */
/ After the original set of tables has been re-created we */
/ use R3 - SYSTEM-CALL (rel 2.2) to generate the screen */
/ and then get the next entry in table H1 to build the */
/ next screen. For releases 3.0 and higher use generate */
/ dynpro. */
FORM RECONSTRUCT_DYNPROS.
LOOP AT H1.
CASE MAIN.
WHEN 'Y'.
if h1-name ne repid.
IF H1-NAME NE R1-NAME.
MOVE H1-NAME TO OLDNAME.
ENDIF.
ENDCASE.
PERFORM RECONSTRUCT_F.
PERFORM RECONSTRUCT_E.
MOVE-CORRESPONDING H1 TO H.
IF MAIN = 'Y'.
move repid to h-prog.
MOVE R1-NAME TO H-PROG.
move repid to dynname.
MOVE R1-NAME TO DYNNAME.
ELSE.
MOVE H1-NAME TO H-PROG.
MOVE H1-NAME TO DYNNAME.
ENDIF.
MOVE H1-NUMBER TO H-DNUM.
WRITE H1-NUMBER TO DYNNAME+40(4).
EXPORT DYNPRO H F E M ID DYNNAME.
SYSTEM-CALL GENERATE-SCREEN DYNNAME. "Up to rel 2.2
GENERATE DYNPRO H F E M ID DYNNAME "R 3.0, 4.0, 4.5
MESSAGE DYNPRO_MESSAGE
LINE DYNPRO_LINE
WORD DYNPRO_WORD.
REFRESH: M, F, E.
CLEAR: M, H, F, E.
ENDLOOP.
ENDFORM.
/ Re-build Fields table */
FORM RECONSTRUCT_F.
LOOP AT F1 WHERE NAME EQ H1-NAME AND
NUMBER EQ H1-NUMBER.
MOVE-CORRESPONDING F1 TO F.
APPEND F.
ENDLOOP.
ENDFORM.
/ Re-build Logic table */
FORM RECONSTRUCT_E.
LOOP AT E1 WHERE NAME EQ H1-NAME AND
NUMBER EQ H1-NUMBER.
MOVE-CORRESPONDING E1 TO E.
APPEND E.
ENDLOOP.
ENDFORM.
/ scan for included files (Upload) */
FORM SCAN4-INCLUDES.
IF FUNC = 'D'. "Downloads - whole table needs to be scanned
LOOP AT S.
PERFORM SEARCH-FUNC.
ENDLOOP.
ENDIF.
IF FUNC = 'U'. "On upload scan line by line as we are re-building abap
PERFORM SEARCH-FUNC.
ENDIF.
ENDFORM.
/ scan for text INCLUDE xxxxxxxx */
/ reject INCLUDE STRUCTURE as structure not a valid */
/ program name */
FORM SEARCH-FUNC.
CONDENSE S-TXT.
SEARCH S-TXT FOR '.INCLUDE .'.
CASE SY-SUBRC.
WHEN 0.
IF S-TXT+8(9) EQ 'STRUCTURE'
OR S-TXT+8(9) EQ 'structure'
OR S-TXT+8(6) EQ '<ICON>' "rel 3.0c 3.0d
OR S-TXT+8(6) EQ '<icon>'
OR S-TXT+8(6) EQ '<type>'
OR S-TXT+8(6) EQ '<TYPE>'
OR S-TXT+8(9) EQ '<methods>'
OR S-TXT+8(9) EQ '<METHODS>'.
EXIT.
ENDIF.
IF SY-FDPOS EQ 0. "INCLUDE must be in pos 1 (by reason of condense)
PERFORM VALIDATE_INCLUDE.
ELSE.
EXIT.
ENDIF.
ENDCASE.
ENDFORM.
/ Validate INCLUDES . */
FORM VALIDATE_INCLUDE.
SEARCH S-TXT FOR '...' STARTING AT 9 ENDING AT 39.
CASE SY-SUBRC.
WHEN 0.
WHEN OTHERS.
SEARCH S-TXT FOR '. .' STARTING AT 9 ENDING AT 38.
IF SY-SUBRC NE 0.
EXIT.
ENDIF.
ENDCASE.
IX = SY-FDPOS.
ASSIGN S-TXT+8(IX) TO <F>.
Now check for Include Mask for example if include mask was set to
Z* then only include programs whose first letter starts with a Z.
1) get length of the INCLUDE program name. Must be less than or
equal 40.
2) Compare it with the Include mask.
3) If Ok add include program name to include table
clear i_include.
move <f> to i_include-name.
CLEAR I_INCL.
SEARCH IMASK FOR '.*.'.
IF SY-SUBRC = 0.
CONDENSE IMASK.
ENDIF.
IF ( <F> CP IMASK OR IMASK = ' ' ).
READ TABLE I_INCL WITH KEY = <F>.
IF SY-SUBRC NE 0.
MOVE <F> TO I_INCL-NAME.
move 1 to i_include-count.
collect i_include.
APPEND I_INCL.
ENDIF.
ENDIF.
ENDFORM.
/ Download table S. */
FORM DOWNLOAD_DATA.
CLEAR TXLINE.
WRITE 'Downloading ' TO TXLINE.
WRITE R1-NAME TO TXLINE+12.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 0
TEXT = TXLINE
EXCEPTIONS
OTHERS = 1.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = FN3
FILETYPE = 'ASC'
TABLES
DATA_TAB = S.
ENDFORM.
/ Download Binary files H1 */
FORM DOWNLOAD_BIN_H1.
DESCRIBE FIELD H1 LENGTH J.
DESCRIBE TABLE H1 LINES I.
NR_OF_BYTES = I * J.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = FN1
FILETYPE = 'BIN'
BIN_FILESIZE = NR_OF_BYTES
IMPORTING
FILELENGTH = FILESIZE
TABLES
DATA_TAB = H1.
ENDFORM.
/ Download Binary files F1 */
FORM DOWNLOAD_BIN_F1.
DESCRIBE FIELD F1 LENGTH J.
DESCRIBE TABLE F1 LINES I.
NR_OF_BYTES = I * J.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = FN2
FILETYPE = 'BIN'
BIN_FILESIZE = NR_OF_BYTES
IMPORTING
FILELENGTH = FILESIZE
TABLES
DATA_TAB = F1.
ENDFORM.
/ Upload data from file .EEE */
FORM UPLOAD_EEE.
CLEAR TXLINE.
WRITE 'Uploading ' TO TXLINE.
WRITE R1-NAME TO TXLINE+10.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 0
TEXT = TXLINE
EXCEPTIONS
OTHERS = 1.
MOVE 'Y' TO FIRST-TIME.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = FN3
FILETYPE = 'ASC'
IMPORTING
FILELENGTH = NR_OF_BYTES
TABLES
DATA_TAB = S1.
LOOP AT S1.
IF S1-TXT(4) = '????'.
MOVE S1-TXT(8) TO NEW-FUNC.
IF FIRST-TIME = 'Y'.
MOVE S1-TXT(8) TO OLD-FUNC.
MOVE 'N' TO FIRST-TIME.
ELSE.
PERFORM STORE_COMPONENT.
MOVE NEW-FUNC TO OLD-FUNC.
ENDIF.
ENDIF.
IF S1-TXT(4) NE '????'.
PERFORM REBUILD-COMPONENT.
ENDIF.
ENDLOOP.
PERFORM STORE_COMPONENT. "last component still to be processed
PERFORM REBUILD-CUA. "re-build CUA, statuses, pfk etc
ENDFORM.
/ Upload Dynpro headers (HHH) and fields (FFF) */
/ titles and dynpro logic is contained in file .EEE */
/ and has already been processed. */
FORM UPLOAD_HHH.
CASE REL3.
WHEN 'X'.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = FN1
FILETYPE = 'BIN'
IMPORTING
FILELENGTH = NR_OF_BYTES
TABLES
DATA_TAB = H2.
LOOP AT H2.
MOVE H2-CNAME TO H1-NAME.
MOVE H2-CNUM TO H1-NUMBER.
MOVE H2-NNAME TO H1-PROG.
MOVE H2-NNUM TO H1-DNUM.
MOVE H2-CTIM TO H1-TGEN.
WRITE '19' TO H1-DGEN(2).
WRITE H2-CDAT TO H1-DGEN+2(6).
WRITE H2-FILL TO H1+88(39).
APPEND H1.
ENDLOOP.
WHEN OTHERS.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = FN1
FILETYPE = 'BIN'
IMPORTING
FILELENGTH = NR_OF_BYTES
TABLES
DATA_TAB = H1.
ENDCASE.
LOOP AT H1.
MOVE H1-NAME TO T-NAME.
MOVE H1-NUMBER TO T-NUMBER.
APPEND T.
ENDLOOP.
ENDFORM.
/ Upload Binary file F1 - Dynpro fields */
FORM UPLOAD_FFF.
CASE REL3.
WHEN 'X'.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = FN2
FILETYPE = 'BIN'
IMPORTING
FILELENGTH = NR_OF_BYTES
TABLES
DATA_TAB = F2.
LOOP AT F2.
OLD_F1 = F2.
APPEND OLD_F1.
ENDLOOP.
LOOP AT OLD_F1.
MOVE-CORRESPONDING OLD_F1 TO F1.
APPEND F1.
ENDLOOP.
WHEN OTHERS.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = FN2
FILETYPE = 'BIN'
IMPORTING
FILELENGTH = NR_OF_BYTES
TABLES
DATA_TAB = F1.
ENDCASE.
ENDFORM.
/ Re-construct data from file .EEE */
FORM REBUILD-COMPONENT.
CASE OLD-FUNC.
WHEN '????LOGC'. "Dynpro LOGIC.
CASE REL3.
WHEN 'X'.
SHIFT S1-TXT+8 RIGHT BY 32 PLACES.
ENDCASE.
MOVE S1-TXT TO E1.
APPEND E1.
/ Load ABAP Source code, CUA, pfkeys etc to int tables */
WHEN '????SRCE'.
MOVE S1-TXT TO S-TXT.
APPEND S.
CASE INCLUDES. "Included file wanted
WHEN 'Y'.
PERFORM SCAN4-INCLUDES.
ENDCASE.
if restoring / uploading rel 3.1 or lower different cua tables
are used. At generate CUA time these will be converted by the
system to rel 4.0
WHEN '????STAT'.
CASE REL3.
WHEN 'X'.
MOVE S1-TXT TO OLD_STA.
APPEND OLD_STA.
WHEN SPACE.
MOVE S1-TXT TO STA.
APPEND STA.
ENDCASE.
MOVE 'Y' TO CUA-FLAG.
WHEN '????FUNC'.
CASE REL3.
WHEN 'X'.
MOVE S1-TXT TO OLD_FUN.
APPEND OLD_FUN.
WHEN SPACE.
MOVE S1-TXT TO FUN.
APPEND FUN.
ENDCASE.
MOVE 'Y' TO CUA-FLAG.
WHEN '????MEN1'.
CASE REL3.
WHEN 'X'.
MOVE S1-TXT TO OLD_MEN.
APPEND OLD_MEN.
WHEN SPACE.
MOVE S1-TXT TO MEN.
APPEND

Which module is best for me !

Hi,
I am 2006 passout B.Tech graduate (Electronics & Commn).Right now I got into a rpivate company who is going to give me training on different modules .Which module should I select in SAP HR/MM/PP/SD or PS...so that I can built a good carreer. Is PS best for me
Regards,
David

Dear David,
I advice you to go only for ABAP to start with. Any other module at his stage should be your short term goal. I advice you even if the situation persists you to undergo training in one of the modules you have mentioned, better to learn ABAP yourself. Your profile suits best to Technical role and later on you can assume the position of a techno functional consultant.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh
P.S. you can send me a mail at my mail id [email protected] for any specific details

Call ABAP function module from script?

Hi,
I have an ABAP function module, which works fine when I call it in a transformation.
Since I don't need to execute this function for each record but rather for each file I process, I would like to move the call from the DataFlow to a script in the WorkFlow. When I click on the 'functions' button the ABAP FM is available in my SAP Datastore, so I drag and drop it into my script. I also make sure to populate all required variables.
There are no error messages or warning when I check my job definition.
When I execute it, I get the following RFC error:
Function call <xxx ( abcd ) > failed, due to error <150413>: <RFC CallReceive exception <FUNCTION_NOT_FOUND>.>.
Is it just not possible to call an RFC enabled function module in SAP from a script or am I doing something wrong here?
Thanks,
Jan.

Could you please let me know how I can call an abap function module from a transformation? (from abap xslt program). I know how we can call methods of a class from the transformations, but no idea how we can call function modules. Any suggestions or a sample code snippet towards this will be very useful for me.
Thanks,
Shashi.

Function Modules for goods movement

Hi Expert,
I need FM Modules for goods movement from one bin to other bin and for Storage location to other storage location.which movement type we have to use for BIN to BIN and Sloc to Sloc.
How to find the stock of a material with respect to bin level.
-RK

Hello,
Hello have alook at below FM's:-
CALL FUNCTION 'MB_CREATE_GOODS_MOVEMENT'
CALL FUNCTION 'MB_POST_GOODS_MOVEMENT'
Regards,
Nikhil

After completed as an MBA HR & System, Which module is the best for freshers ??

Hi, I am Samrat Saha. I completed my post graduation as an MBA (HR&System). I did BCA in my graduation and did Higher secondary in commerce. I want to build my career in SAP. But I have some questions::
1. If i go for SAP then which module is the best for me..??
2. As a fresher is companies showing any interest to recruit..??
3. I hard a Course from Victoria University, Melborn, That Is "Master of Business (Enterprise Resource planning System) with SAP".. Is this Master degree worthy to do??
Message was edited by: Sarah Kellman

Hello Samrat,
It is not possible to provide guidance on what career path you should take. This is a conversation you need to have with a Career Planner or perhaps one of your professors. You should follow the path you are most interested in, be it a functional role or a technical role. Ideally you may want to consider getting some work experience in both fields, and then determine which area you wish to pursue.
You state you have an MBA in HR & System....System what?? System development? Technology? Programming? Data Warehousing? Even HR is a vast area within the SAP world. We have Payroll, Recruiting, Self Services, Compensation, Time Management, Learning Management Systems, etc. Most consultants select one or two areas to pursue. There is no such thing as a single person who knows the complete SAP HR solution...it's just too big!
I will suggest that you consider taking an SAP HR course so that you can get an idea as to how large the application is. There are lots of courses available in e-learning. I would recommend either SAPHRE or HR050E to start. Once you have completed one of these, you'll be in a better position to decide what you want to do, or at least decide what you don't want to do.
Good Luck!

How to run ABAP Function Module in Background Wchich Takes Long Time to Run

How to run ABAP Function Module in Background FOR LONG TIME
I am not that experienced with ABAP. I am on SAP BI 7.0. I WANT TO RUN A FUNCTION MODULE
RSDRT_INFOCUBE_DATA_COPY.
I used SE37 and then executed the module, I supplied the parameters on the form which opped-up and then program started running. . Program was however interrupted after 10 minutes by ABAP. How can I run it in background without interruption?
THANKS A LOT.

Hi,
You can call this FM in a program and run that program in background.
Regards,
Raju

Calling an ABAP function module

Hi friends,
I am developing an application in EP6 SP2 using JSPDynPage from which, want to call an ABAP function module that returns table and show the values from this table in this application.
I went thru various blogs and APIs. I am confused between SAP JCO, JCO client service and connector framework. Do u have any documentation on how to connect to R3 systems and call a function module, retrieve results etc.
Regards,
Nilz

JCo is the point to start. This gives you low level access to all rfc functions. Everything else (accept BSP and Web dynpro) are just layers of encapsulation around the low level JCo function.
The steps are always like this:
call the sap system for rfc login
prepare data areas and call in java
call the rfc in the R/3 system
handle exceptions
logoff and free ressource
continue with data obtained in R/3
There is a lot of material around jco. One book that is fairly ok is :
SAP Interface Programming
A comprehensive reference for RFC, BAPI, and JCo programming
J. Meiners, W. Nüßer
SAP PRESS ISBN 1-59229-034-5
This helps you navigate through the wealth of information also at SDN

Debugging of ABAP Function Module through ISA Application CRM B2C 4.0

Hi Experts
There is way to Debug ABAP FM through ISA CRM b2c Application by Modifying some XML Files as per Extn Guide.
I tried modifying the <APPLICATION_HOME>\WEB-INF\xcm\customer\modification\modification-config.xml After that I restarted the Application .
But it is not Breaking for Both Statefull & Stateless FM after running my Application.
With Some Help i found that if we try it on Remote System ( Means SAP GUI has to in Same System where CRM is Installed ???????????). but that is not Advisable Right !!!.
So if i am able to Debug ABAP Function Module through ISA Application from any Other remote System.
I think it will be very Useful.
Thanks & Regards
Ravi Sah

Ravi
It is other way around !!!
You should have SAP GUI installed on the machine in which you start(access) your B2C Application. This enables for ABAP Debugging.
We have tried this and works fine for us !!!
Thanks
Jack
<b>Allot points if my post helps !!!</b>

Calling ABAP Function Module in BODS, but not RFC_enabled

Hello Experts
We have an ECC ABAP Function Module takes 5 input parameters and returns Division Name for an Employee and Employee PERNR is one of the input parameters for the Function Module.
I tried adding a function call in the target schema of Query Transform and the output parm passes out as an Output column. But getting an error that ABAP FM is not RFC_enabled. I checked attributes, and it is not RFC_enabled.
So is there way to invoke this FM as part of BODS ABAP Dataflow?. Becuase the code executes on ECC, it does not need to be RFC enabled, I believe. But on the Query Transform, the option "New Function Call" isn't enabled or it is greyed out, I can't select it.
What is the solution to invoke this ABAP FM with enabling RFC on it ?
Please provide me your inputs.
thank you

Hi,
Create a custom wrapper FM which is Remote enabled & call the FM DD_DOMA_GET inside your custom Remote FM. Changing the std. FM would be a core code mod. hence above approach would be safe.
Thanks,
Best regards,
Prashant

As a abaper which module is good to give support

Similar Messages

Maybe you are looking for