As a mobile me user I uploaded my photographs for clients to view and download. How do I do this in ICloud?

As a mobile me user I uploaded my photographs for clients to view and download. Can and how do I do this in ICloud?

You can't.  The Gallery service in MobileMe does not exist in iCloud.  You will need to switch to another photo hosting web site.

Similar Messages

  • I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build.  The same call works fine when running on the device

    I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
    I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
    The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
    I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
    I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
    By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
    Anyone have an idea on other things to try to debug/resolve this?
    Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
    Thanks!

    After a week's worth of debugging, I found the issue.
    The Java type returned from the call was defined as ArrayList.  Changing it to List resolved the problem.
    I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid.  And, why it works in Debug mode and not in Release build is even stranger.  Maybe someone can shed some light on the logic here to me.

  • HT1527 I have windows 8.1 and cannot access itunes store even creating a new apple id. With other users on the same computer I can access itunes store. How can I solve this?

    I have windows 8.1 and cannot access itunes store even creating a new apple id. With other users on the same computer I can access itunes store. How can I solve this?

    i had the same problem before using a fresh install of Windows 8.1.  I have resolved this issue by running the program compatibility wizard.  This I did by right-clicking on the iTunes icon in the desktop, selecting Troubleshoot compatibility, waited for it to detect compatibility issues and when presented with the following options: 1.) Try recommended settings; 2.) Troubleshoot program, I chose the latter.  When asked what problems I noticed, I checked the following: "The program worked in earlier versions of Windows but won't install or run" and "The program requires additional permission"
    After that, it tired to resolve the issue, and provided the necessary settings to run iTunes.  Now it's running flawlessly.  I have Avast anti-virus installed though.
    HTH!

  • I have reinstalled itunes multiple times but apple mobile device doesn't download. how can i fix this or download apple mobile device

    I have reinstalled itunes multiple times but apple mobile device doesn't download. how can i fix this or download apple mobile device

    Type "apple mobile device service" into the search bar at the top of this page by "Support" and read the resulting articles.

  • Data Source to upload plan data for CO_OM_CCA_: CC: Costs and Allocations

    Hi Guru's,
    We have Data source that which upload Actual data for CCA (0CO_OM_CCA_1 - Cost Centers:cost and allocations).  Every time it is full upload before loading the data deletion of previous load request will be done.
    One more information required that i have checked in the BW cube for plan data it is available in the info cube for one cost center and rest of the costcenter i don't have the data now the users are requesting to upload the plan data for rest of cost centers.
    Now as per the business requirement the users are requesting to upload the plan data in to the same i am not sure whether it will pull the plan data with actuals in to BW cube. Is there any alternate with the same data source or else is there any specific data source for uploading Costs and Allocations plan data
    Please suggest me how can i go a head with this requirement.
    Thanks in Advance.
    Ganni

    You can use the same datasource to load plan/budget data to the cube for all the costcenters. And regarding the actuals, you can use 0CO_OM_CCA_9 datasource to load to actuals cube and create a multi on top of both plan and actuals cube for reporting purposes.

  • Firefox will not save my user name and password for one of my sites. How can I fix this problem. It is getting annoying having to reenter every time I check this site. Is there a solution.

    I had my user name and password saved for my library site. My grandson hit something and now the saved user name and password are gone. It asks me every time to enter it and it is getting annoying. How do I fix this. I want Firefox to remember these codes.

    You can create a bookmark with the JavaScript code via a right-click on the "Remember Password" link on the squarefree.com website and choose "Bookmark This Link" and select the "Bookmarks Toolbar" as the destination folder for easy access.
    * https://www.squarefree.com/bookmarklets/forms.html#remember_password
    You need to use the "Remember Password" bookmarklet before or after filling the name and password field on the website with the <u>login form</u>, but before submitting the login form by clicking a button on the web page.
    If the site is using autocomplete="off" then you see a number not equal to 0 (i.e. attributes were removed) in the pop-up alert from the bookmarklet and Firefox should offer to remember the name and password via a drop down dialog of the key icon that will appear on the location bar (Firefox 4+) or via an info bar at the top (Firefox 3).

  • When the user press the button Calculate Tax (see attached doc) and click on Tax details then this should be updated automatically. But it does not work it is empty and the user has to update manually.

    When the user press the button Calculate Tax  and click on Tax details then this should be updated automatically. But it does not work it is empty and the user has to update manually.
    All setup looks fine.
    Please let me know what can be done on this?
    Regards,
    Peu

    HarryAustralia wrote:
    I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
    The iPad cover lock is for when you use a cover with magnets in it to lock and unlock the iPad when you close the cover or open it. Try running a refrigerator magnet along the sides of the iPad and see if that trips the iPad Cover Lock back into the settings.
    That is not the same thing as the iPad Auto Lock setting which allows you to set an allotted time before the iPad goes to sleep.
    You can try resetting all settings to see if the Auto Lock feature retinrs to the iPad.
    Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. This can be a little time consuming re-entering all of the device settings again.

  • I re-installed Firefox on my laptop; but other users did not get the program installed under their log-in; how do I fix this?

    I recently un-installed Firefox on my Windows Vista laptop; when I re-installed it, the program is only available to me (the administrator of the laptop); two other users are not able to use the program. I've tried "right-clicking" on the Firefox icon, clicking on Properties, then Security, and adding the two other users to the list, but after clicking on "apply" and then "OK", the other users still don't have access to the program. How do I fix this? Thanks!

    First and foremost, learn punctuation and capitalization so we can read what you're writing properly.

  • I have inadvertently removed my "Upload Photo" plugin for Facebook in Lightroom 5. How do I get it back?

    I was having trouble uploading photos from Lightroom directly to Facebook. I thought maybe the plugin was out of date or something, so I paid for and downloaded the "Upload Photo" plugin. It's supposed to allow for direct uploads to several social media sites, not just Facebook. I followed the install instructions, followed the troubleshooting directions. Finally I "removed" it, thinking I could reinstall it. Now I can't get it back. It was supposed to have been already available in LR5. Any ideas?

    Hi @kiefercreative
    Well the good news is that any product you acquire with Add-ons are stood in the Cloud so even if you remove them you can always install them again from My Add-ons:
    https://creative.adobe.com/addons/my_addons
    In terms of your specific issue of getting the plug-in to work, its walkways best to first contact the producer and for every producer we have their contact email on their producer page so in this case it's: [email protected]
    They do provide a good guide on their website. So I suggest that if you have completely removed the plug-in you first get the zip file again by installing from my Add-ons, you may need to click the Remove button first but after that you just click Install. After that follow the instructions here:
    Installation | Lightroom plug-ins
    Hope that helps.
    Jonathan

  • HT1473 I am a songwriter and new at this.  Can I upload my work for sale on Itune and does Itune interact with the Performing Arts organization?

    I am a songwriter and want to upload my work to itune but I need a few question cleared up.
    1.     Does Itune interact with the Performing Arts organization such as BMI in order for artist to be paid or do i just set up a paypal account and pay artist myself?
    2.     What percentage of sales does itune take or is it a flat rate?
    3.     When i upload does itune give me an option to set price for my work.?

    TownSquareTheMusic wrote:
    I am a songwriter and want to upload my work to itune but I need a few question cleared up.
    1.     Does Itune interact with the Performing Arts organization such as BMI in order for artist to be paid or do i just set up a paypal account and pay artist myself?
    2.     What percentage of sales does itune take or is it a flat rate?
    3.     When i upload does itune give me an option to set price for my work.?
    Town Square,
    In addition to the iTunes Store, you may wish to check out some of the online stores that may be a bit more flexible for artists just starting to sell online:
    NoiseTrade
    BandCamp

  • LIghtroom on my mobile phone doesn't work anymore because the "trial" period is over. How do I fix this so I can use it on my mobile phone again?

    I'm just trying to get Lightroom to work on my mobile phone again......help.

    Hi Charles. please read this article...Lightroom mobile unavailable to Education memberships | Kivuto
    Creative Cloud memberships purchased from a third-party provider (e.g. Kivuto) do not provide access to Creative Cloud services, including Lightroom mobile.
    Guido

  • HT204406 My itunes library will not upload. It just says an error occurred.  How do I fix this?!!!!!

    My Itunes music has a cloud with an exclamation point and I cant upload to icloud.  It was working fine until I updated to mountain lion and now my icloud has no songs.  The library is still there and I can play everything in itunes.  What can I do to fix this?

    Search the error code in the support search and you should find something that will walk you through it, but without an error code it's a little hard to know what you're talking about

  • There is an ad for firefox mobile on the google start page that is in some foreign language. How do I correct this?

    I just installed Firefox 4 and on my start page, below the Google Search box, there appears to be a link to download firefox 4 for mobile devices in some strange language. How do I get rid of/correct that?''

    Any chance you are using TrendMicro?

  • My Time Machine keeps repeating the error message "Time Machine could not complete the back- The back-up disk image "/Volumes/Data/User's iMac.sparsebundle" could not be accessed (error -1). How can I fix this?s/

    My Time Machine could not complete the back-up.  The error message says "The backup disk image "/Volumes/DataUser's iMac.sparsebundle" could not be accessed (error-1).  How can I fix this problem?

    Welcome to the Apple Support Communities
    See > http://pondini.org/TM/C17.html

  • HT201317 My iPad can upload photos in photo stream but it cannot download them. Why is this?

    This is shared photo stream, not my photo stream. My iPhone has no problem regarding this, only my iPad2.

    Depending on the update, 1.4GBs may not be enough.
    If you go to Settings>General>Usage again and wait for the list of apps to open, you will get an idea of what is using the space on your phone.  You may need to tap Show all Apps in order to see them all.  Look through the list and see if you can determine the apps using most of your space.
    You might also want to connect your phone to your computer using your usb cable, open iTunes, then click on the name of your phone in iTunes and look at the segmented usage bar at the bottom.  Hover your mouse over the yellow segment on the right to see how large "Other" is (see image below).  If it's significantly larger than 1-2GBs you probably need to restore your phone to clear unnecessary cache files.
    This will also give you an idea what categories of data are using most of the space on your phone.

Maybe you are looking for