As a result of qty correlation, dlv.grp 002 from sls.ord.*** will be delete
I create a sales order with sales BOM which one component is short of stock that reserve no qty. And then I create outbound delivery, but error log happens as below and the delivery order has nothing in the item lines:
As a result of qty correlation, dlv.grp 002 from sls.ord.*** will be deleted.
But after creating SO, I updated the customizing of BOM material's item category, and change "create delivery group" from A to space.
How can I solve this problem to create partial delivery order in spite of some component materials are short of stocks?
Please check Note 350468.
Also check the note 774347 for collective notes on BOM.
Hope this helps
Regards
Sai
Similar Messages
-
I'm apple user. some one has hacked my user ID profile & has changed my security questions. Also hacker has give rescue email , which is absolutely unknown to me.Resultantly i can't make any purchase from apple. How apple can help me.
Thanks in anticipation.You will need to contact Support in your country to get the security questions reset (these are user-to-user forums) : Apple ID: Contacting Apple for help with Apple ID account security (if your account's password has been changed then they should also be able to reset that for you)
When they've been reset you can then use the steps on this page to change the rescue email address to an account that you have access to, for potential future use : Manage your Apple ID primary, rescue, alternate, and notification email addresses -
Hello, trying to download the latest iTunes software version, a pop up comes with a "invalid signature" message. Try to do download only with the same results. I can buy and download from iTunes but can't get the latest version?
Transfer Purchases = iTunes > File > Transfer Purchases
http://support.apple.com/kb/HT1848 -
When I type a word into the address/url/awesome bar that is a word I know I have used as a tag on several bookmarked pages, only 4 of the results in the drop down are bookmarked pages. The rest of the pages in the drop down are other pages suggested from the web. Because only 4 of the results are pages I've tagged, the page I want (and have tagged) often doesn't show up. Is there a setting I can change to make it show more tagged results? Or is there a way after I get the original results to have it add additional tagged/bookmarked items?
That can be a problem with the Fastestfox extension.
See [[Troubleshooting extensions and themes]]
In the FastestFox Options, uncheck "Enhance Awesomebar"
See image 10 in the image gallery: https://addons.mozilla.org/firefox/addon/9825
https://addons.mozilla.org/img/uploads/previews/thumbs/37/37975.png -
Hi All,
I am crawling documents from a file server. I created a new content source and crawled the documents. All documents are crawled successfully.
Then I went to my enterprise search center site collection and created a new result source. I have added the query to use above content source.
After that, on a page I am trying to configure the search results web part to display documents using this result source. Now the problem is:
It displays all the documents that are crawled without searching for anything. I mean first it should not display any results. If a user searches for something , then according to that search it should display results.
Any idea how to do this in the web part? I am using SharePoint 2013 on premise enterprise edition. No code. Totally OOTB.Hi Mohan,
What did you use for the Query text in the result source?
I could reproduce this issue when I used Query text like: {searchTerms} Path:”http://sps2k13sp/sites/First/Shared%20Documents”
Then I changed the Query to
{?{searchTerms}
Path:"http://sps2k13sp/sites/First/Shared%20Documents"}
, then Search result web part didn’t return results without searching.
So , check your result source, and use the Query like the above(adding "{?...}").
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
Should cancelled mailbox moves result in any moved mail data removed from target server?
I was moving mailboxes from 1 DB to another. 3 out of 120 were left running for 12 hours; they were the biggest ones and it was very slow to process the items. There were also reports of slowness on the server so I had no choice but to cancel the moves.
My question is should cancelled mailbox moves result in any moved mail data being removed from the target database? It doesn't appear that my disk as increased in space again so I'm wondering if it's there as whitespace maybe? There is an event logged to say
the mailbox has been deleted from the target.
Would appreciate if someone can clear this up and possibly explain exactly what occurs during this type of scenario.
Thanks.Hi,
Thank you for your kindly remind.
In Exchange 2000, 2003 and 2007 mailboxes become unavailable during movement, when a mailbox move takes place, the mailbox isn't actually moved, it's just copied to the destination location. Once that copy has finished, AD is updated to point to the new location
and the old mailbox is deleted from the source EDB file.
The most different between Exchange 2010 and legacy version in move mailbox is that allows end-users to be online in their email accounts. On completing the move users just needs to reopen their Outlook clients.
Mailbox Move Requests are a new feature set of Exchange 2010 and requires running a series of Cmdlets to perform asynchronous online mailbox moves with the help of a service agent called Mailbox Replication Service (MRS). MRS is available on all Exchange 2010
Client Access Servers.
Best Regards,
Allen Wang -
Creation of BOM with Items whose qty is not fixed derived from a formula.
Bom need to be created for a finished product whose Item quantities are ot fixed. The scenario is explained below.
Raw milk(cow and buffalo) is a Raw Material recd from Vendors in litres.It is converted to
kg as 1L = 1.027Kg.Finished Header material is Toned milk with Fat 3%
and SNF 8.5%.UOM for FG is in Litre only.
Fat and SNF(Protien)% is measured at incoming stage and recorded and Fat
content will vary from 3 to 6.5% and SNF content will vary from 7 to 9%.
Based on the measured Fat and SNF% value the required Fat and SNF% is
calculated for the Finished Header Material.For each measured value
target Fat% and SNF% will vary.
Then again after calculating the requuired Fat and SNF%,If excess Fat
and SNF found in the raw milk they are extracted. If Fat and SNF
contents are less than the target value additional Fat/SNF will be
added.For extraction and addition they follow certain percentage.
Can pls let us know how to create a BOM for such scenario. I am at Customer
place for implementation.I have given the calculation method below.
Formula used:
1)Available (Fat or SNF) % in 1027Kg = Available (Fat or SNF) % per Kg * Input Milk Qty in Kg(1027)
2)Required (Fat or SNF) % in 1027Kg = Target (Fat or SNF) % per Kg * Input Milk Qty in Kg(1027)
3)Excess/Less (Fat or SNF)% in 1027Kg = Available (Fat or SNF)% in 1027 Kg - Req (Fat or SNF) % for 1027Kg
4)Addition Fat to be added or Extracted = Excess or Less Fat % in 1027Kg * 72%
5)Additional SNF to be added or Extracted = Excess or Less SNF% in 1027 * 95%
Note: 1) In The above formula Available Fat% per Kg of Raw milk may vary from 3 to 6.5%
Note: 2) In The above tformula Available SNF% per Kg of Raw milk may vary from 7 to 9%.Hi
U need to use master recipes for this kind of scenario(PP-PI)
First Create char like SNF , FAT ect what ever u want to use in formulas
Then assign these char to Batch class (023) and assign to your ROH , HALB, FERT in Classification view
Create BOM for u r FERT and later Master recipe
In Master recipe u can use material calculations using in put char values like % FAT ect
Then u r BOM Comp qty will change automatically as per the % FAT in Raw milk
In this way u can map the req in SAP. I hope this info will be useful
Regards
Brahmaji -
All I can say is wow! My PS CS6 results keep blowing away those I got from PS CS5!
If you use Photoshop to prepare photographs and can spare some time, here's a great idea:
In the Photoshop CS6 beta, re-process some of your photos on which you've done your best work before, then compare your results.
I'm betting you will be able to make them look better than you were ever able to do with any prior version of Photoshop. Maybe even night and day better!
I've been doing just that.
Not only am I able to achieve results directly and quickly with Photoshop CS6, but they're just coming out better looking. A lot better. Everything just seems to work more smoothly and accurately, from the more accurate cursors helping with selections, to the UI that's easier on the eyes, to the great stability of this beta. The improvements in Camera Raw 7 give the images the best start yet, and touch-up and whatnot in Photoshop proper just goes smoothly.
To show you what I mean, here's a raw file, which I shot in 2008 with my Canon EOS-40D and 28-135 zoom lens. The first link below is to the best result I was able to achieve using Photoshop CS5 back a few years ago. The second link is what I just managed with Photshop CS6. I thought I had done really well before, and was quite proud of that result. But my more recent Photoshop CS6 result has more presence and just feels nicer. See if you don't agree.
Warning: These are large 25 megapixel files.
http://images.ProDigitalSoftware.com/Mustang_25MP.jpg
http://images.ProDigitalSoftware.com/Mustang_25MP_CS6.jpg
In a recent thread Jeff Schewe pointed out that technology advances such as what have gone into the PV2012 process of Camera Raw are allowing us to take our raw data further than was ever possible before, and wow, he wasn't kidding!
-NoelHudechrome wrote:
The creative side is just that and no amount of tech wizardry can overcome and guarantee that the results from re-visiting with an upgrade will consistently provide a better result
I agree, there's a degree of subjectivity in all this. And I'm only one person saying I think my results look better - others might not like them so much.
But every image I've tried this on - and I've done it quite a few times now, just to get to know Photoshop CS6 - I've come up with a better result, and virtually always in less time. I've had 2+ decades of experience with Photoshop, so I don't think I'm still learning to do things better at this rapid a rate.
Here are two images that represent my latest comparison, best I did with a snapshot in harsh lighting in CS5 vs. best I could do in CS6. I feel the second has a bit more presence and depth. I welcome your opinion.
Hudechrome wrote:
The bottom line: Do the tools free or constrict? With a suite like Photoshop, both are in evidence in every release I have encountered from Photoshop5 to CS6.
Just a week certainly isn't enough time to try EVERYTHING but I have to say I've not found much of anything that I feel works worse in PS CS6 so far. The more I use this thing, from the small tweaks to the new features, to the fact that it's MORE stable than Photoshop CS5, the more I am impressed.
-Noel -
Result comes out to Zero for program from Fahrenheit to Celsius!
Hello,
I have a minor glitch in my program. It comes out to zero for the result each time. Could anyone take a quick look to see what I"m overlooking. Any help would be greatly appreciated. Much Regards,
Here is the code:
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class Temperature extends JFrame {
private JPanel p;
private JLabel label1;
private JLabel label2;
private JTextField F;
private JTextField C;
public Temperature() {
label1 = new JLabel( "Enter temperature in degrees Fahrenheit: " );
label2 = new JLabel( "The temperature in degrees Celcius is: " );
F = new JTextField (10);
F.addActionListener(
new ActionListener() {
public void actionPerformed(ActionEvent e) {
int iF,iC ;
iF = Integer.parseInt( F.getText());
iC = (int) ((5/9) * (iF - 32));
C.setText(String.valueOf(iC));
} // end actionPerformed()
} // end ActionListener()
C = new JTextField(10);
C.setEditable(false);
p = new JPanel();
p.setLayout (new BorderLayout());
p.add (label1, BorderLayout.NORTH);
p.add (F, BorderLayout.CENTER);
p.add (label2, BorderLayout.SOUTH);
Container c = getContentPane();
c.setLayout(new BorderLayout());
c.add(label1, BorderLayout.NORTH);
c.add(p, BorderLayout.CENTER);
c.add(C, BorderLayout.SOUTH);
setSize(300,150);
show();
} // end Temperature()
public static void main(String args[]) {
Temperature app = new Temperature();
app.addWindowListener(
new WindowAdapter() {
public void windowClosing(WindowEvent e)
System.exit(0);
} // end main()
}// end class TemperatureChange your calculation line to...
iC = (int) ((5.0/9.0) * (iF - 32));
The problem was that (5/9) is an integer divided by an integer which gives an integer result (0).
Regards,
Tim -
Once I connect my iPhone to the compjuter to sync., the computer crashes, and continues to reboot as long as the charge cable is connect between the iPhone and the computer, once I disconnect it, then the computer and iTunes will function normally.
I had uninstalled and reinstalled the iTunes 3 different times, still I am getting the same results, I therefore had to uninstall the iTune from my computer to be able to do my work, and charge the iPhone at the same time. Please note that few weeks ago, everything was working fine.
What can I do to resolve this issue.
Thank you.
MagdiIf you have photos in the Camera Roll on your iPhone and have preferences set to open an image azure application on your pc when a camera is connected, your pc will do just that. That's how one transfers photos taken with the phone to a PC.
You can do two things to avoid this.
1. Just quit the image capture application and open iTunes. You do have iTunes 10.7 or higher installed on your pc, right?
2. You can change the preferences on your pc to do nothing when a camera is connected. And you can set the preference in iTunes to open iTunes when your iPhone is connected. -
Hi, My computer recently got wiped. When everything was re-installed I found that I had no music in my itunes account. It is all on my ipod touch (and very old ipod) but I cannot figure out how to transfer it from the ipod touch into my itunes. Can anyone help? Thanks in advance A
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
-
Result shown in Bex Report is different from Infocube
In BI, Flat file loading, I got data correctly into the cube. But when I tried to generate the report its showing all the key figure values divided by 10. Keyfigures are of type Amount. And when I checked for scaling factors, its showing nothing 1 only (ie nothing).
I am working in BI 7.0 and the reporting tool Business explorer is 3.x version. is this can be a problem?
Can some one help me to solve out this problem?As my currency is OMR, I required three decimal points. So in SPRO it should be maintained as 3.
I checked the scaling factor. Nothing is maintained.
Eventhough I mentioned while creating key figures that decimal places 3, in the infocube its coming only two decimal points.
So if the value is 335.824, I am getting 335.82 in the InfoCube and 33.58 in the report.
I created the keyfigure with fixed currency OMR. But in the flat file the currency filed is not there. So while writing the transformation I gave the currency as NO Conversion.
Where I went wrong, please advise me? -
i am here to share my feeling about apple and its co partner
i have been using apple iphone five s since five month i am happy with it but recently my iphone have some problem with its ear pices then i went to apple service center in abu dhabi
they took my phone for one day and tell me come for next day all will be okey
when i went to next day they say that your iclould account has been locked by apple so you need to wait for one week time
i have already a week and now when i went to meet them today they said just wait till apple reply to them and they are still waiting for that
what the disgusting situation can any one wait to have their phone for fifteen days in this world
such a well known company might not be given such a poor service
where can i contact for that please advice meIf there is a problem with your AppleID, you - and not the provider - must
straighten out the matter.
AppleID disabled:
http://support.apple.com/kb/TS2446
http://www.apple.com/support/itunes/contact/
https://getsupport.apple.com/Issues.action -
my macbook air had two partitions for Mac OS and Windows XP. Because XP partition is too small, I used disk utitility in Mac OS to shrink the Mac partition, and make a new FAT32 partition, which I expected to use it in windows. Till now, I can find three partitions in disk utitily, MacOS/FAT32(which is totally free)/Bootcamp(windows). And in system preference->boot disk, I can see both Mac OS X and Bootcamp Windows.
But when I reboot the computer and press "option" key while rebooting, I only see two boot device options, "mac os" and "recovery", no Bootcamp Windows.
Anybody can give me a hand to recover my previous windows and use the freed partition in windows? Thanks.Hi Stefan!
I have a rather similar problem having a BootCamp Windows 8 Partition. I actually have 2 NTFS partitions for windows and 1 for Mac OS. The situation is:
0 - for Mac OS
1 - BootCamp windows (NTFS - boot) - 60GB
2 - Windows (NTFS) - 100GB
After updating to Maverick I have no idea why, but now I have:
in Mac OS:
0 - Mac OS
1 - BootCamp - 160G
In Windows:
0 - Mac OS
1 - BootCamp - 60GB
I have tried recovering the partition with a windows program, but all it could do is find it, but without any files on it.
How can I restore my partition table to the way it was?!
WHY did Mac OS mess up my windows partition table?
WHY didn't I get a warning that the Boot Table will get altered?!
Thank you for any help -
Notify MRP controler 2 transf Req Qty based on Proces Order from diff Plant
Dear Experts,
Material A is Semi Finished goods, in-house produced in plant 1000
Material B is Raw Material, externally procured from vendors and stored in Plant 2000
Material B is the component required to produce Material A, and this has been created as part of the master data in the BOM in plant 1000.
A plant to plant transfer is done for material B when it is needed for production of material A in plant 1000 from plant 2000.
On creating my Process Order for material A, a reservation is created containing the required quantity of material B. This same quantity i can see on displaying the Materials List of the Process Order ( in the Requirement Quantity column).
Material B is only to be transferred to Plant 1000 based on the requirement quantity of the Process order.
How do I automatically get the MRP controller of Plant 2000 notified of this Requirement Quantity immediately a Process Order in plant1000 is released?
I mean how does the MRP controller in plant 2000 gets to know that there is a need of Raw Materials in Plant 1000 as specified in the Process Order created & released in plant1000?
Thanks for your expected responsesBisolaaina,
Use special procurement key 40:stock transfer for material B at plant 1000. This specifies that the material B is to be procured from another plant 2000. A requirement which arises in plant 1000 is then covered by stock from plant 2000
The following happens during the planning run: on detecting a shortage in plant 1000, the system automatically creates a purchase requisition for a stock transfer in plant 1000 and a release order for the purchase requisition in plant 2000. The date of the release order is determined during scheduling. When the stock transport requisition is converted into a stock transport order, the release order in plant 2000 is automatically converted into a reservation.
Tara
Maybe you are looking for
-
Ever since upgrading to OS 10.8.5 login keychain corrupted; keeps asking for pasword tor OSX, mail and Safari. Help!
-
[ACCEPT][PROMPT] Input not taken into account in the script
Hi, I'm preparing sql scripts to create schemas, one of the script is the main one. In that one I'm requesting the passwords for two users, and a path to create an oracle directory. The password for the first user and the path are taken into account.
-
Where can I get source for JMF tutorials. Oracle links don't work
I tried downloading JFM tutorials from http://www.oracle.com/technetwork/java/javase/index-140313.html but when I click on source code of particular sample I am returned to the above link.
-
Dear All, We are created a purchase order and before saving have checked the check box for creation of info record but when we go the info record and click on conditions to check the conditions but no condition exist. Secondly it gives an message "No
-
How do I copy 1-page of a 62-page document?
How do I copy a single page of a 62 page document?