As an abaper, do I need to learn BI/BO to get in to HANA?

I have heard that HANA uses SQL and SQLscripts and modelling tools.
I am willing to learn the same.
As my organisation does not yet has hana, I would like to know from someone who has tried it out.

Hi Arun,
HANA uses SQL and SQL acripts to design some complex scenarios and we have graphic designer modeler as well.
we can create reports on HANA using BI 4.0 tools, we have few more tools using which you can develop reports.
1) BODS
2) MS Excel also.
So learning BI 4.0 will be an added advantage to you.
If you need brief introduction about HANA and SQL and SQL scripts, gor though the below documnets in SDN.
http://www.sdn.sap.com/irj/sdn/in-memory?rid=/webcontent/uuid/c022341c-5ed1-2e10-0b98-9b6a3314dd25
and check out the blogs in SDN on HANA
Regards,
Venkatesh

Similar Messages

What topics i need to learn in ABAP to work on BW in realtime

hi,
can you pls tell me on what topics i need to learn in ABAP if i had to work on BW in real time.
pls give me the list of topics in ABAP required to work with BW in realtime.
thanks.

"I always work in realtime, by the way, did you find a way to work in the past or future?"
Sometimes I do work, which should have been done the day before!
ec

Need to learn abap objects plz help me

hi to all sdners ,
i need to learn oops in abap plz send me material and tutorials for learning it. please help me .you can send all the materials to my mail id [email protected] will rewarded.

hi
Object Oriented prg
A programming technique in which solutions reflect real world objects
What are objects ?
An object is an instantiation of a class. E.g. If Animal is a class, A cat
can be an object of that class .
With respect to code, Object refers to a set of services ( methods /
attributes ) and can contain data
What are classes ?
A class defines the properties of an object. A class can be instantiated
as many number of times
Advantages of Object Orientated approach
Easier to understand when the system is complex
Easy to make changes
Encapsulation - Can restrict the visibility of the data ( Restrict the access to the data )
Polymorphism - Identically named methods behave differently in different classes
Inheritance - You can use an existing class to define a new class
Polymorphism and inheritance lead to code reuse
Have a look at these good links for OO ABAP-
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sapgenie.com/
http://help.sap.com
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com.
http://www.sapgenie.com/abap/OO/index.htm
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
/people/dirk.feeken/blog/2007/07/06/abap-trial-version-for-newbies-part-17--your-first-abap-object
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/why%20use%20abap%20objects
Hope this helps
if it helped, you can acknowledge the same by rewarding
regards
ankit

Need to learn data transfer

hi to abapers,
need to learn learn data transfer bdc,bi,ct,lsmw .plz send me links.or send it to my mail [email protected] material will be rewarded

Hi,
BDC:
Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system or from a non-SAP system to SAP System.
Features :
BDC is an automatic procedure.
This method is used to transfer large amount of data that is available in electronic medium.
BDC can be used primarily when installing the SAP system and when transferring data from a legacy system (external system).
BDC uses normal transaction codes to transfer data.
Types of BDC :
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as CLASSICAL METHOD.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sap-img.com/abap/learning-bdc-
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
LSMW
Please check this link and you can download LSMW Workbench documents.
http://www.erpgenie.com/sap/saptech/lsmw.htm
Go thro these steps..
Using Tcode MM01 -- Maintain the source fields are
1) mara-amtnr char(18)
2) mara-mbrsh char(1)
3) mara-mtart char(4)
4) makt-maktx char(40)
5) mara-meins char(3)
the flate file format is like this as follows
MAT991,C,COUP,Srinivas material01,Kg
MAT992,C,COUP,Srinivas material02,Kg
AMT993,C,COUP,Srinivas material03,Kg
MAT994,C,COUP,Srinivas material04,Kg
MAT995,C,COUP,Srinivas material05,Kg
goto Tcode LSMW
give Project Name
Subproject Name
object Name
Press Enter -
Press Execute Button
It gives 13 radio-Button Options
do the following 13 steps as follows
1) select radio-Button 1 and execute
Maintain Object Attributes
select Standard Batch/Direct Input
give Object -- 0020
Method -- 0000
save & Come Back
2) select radio-Button 2 and execute
Maintain Source Structures
select the source structure and got to click on create button
give source structure name & Description
save & Come Back
3) select radio-Button 3 and execute
Maintain Source Fields
select the source structure and click on create button
give
first field
field name matnr
Field Label material Number
Field Length 18
Field Type C
Second field
field name mbrsh
Field Label Industrial Sector
Field Length 1
Field Type C
Third field
field name mtart
Field Label material type
Field Length 4
Field Type C
fourth field
field name maktx
Field Label material description
Field Length 40
Field Type C
fifth field
field name meins
Field Label base unit of measurement
Field Length 3
Field Type C
save & come back
4) select radio-Button 4 and execute
Maintain Structure Relations
go to blue lines
select first blue line and click on create relationship button
select Second blue line and click on create relationship button
select Third blue line and click on create relationship button
save & come back
5) select radio-Button 5 and execute
Maintain Field Mapping and Conversion Rules
Select the Tcode and click on Rule button there you will select constant
and press continue button
give Transaction Code : MM01 and press Enter
after that
1) select MATNR field click on Source filed(this is the field mapping) select MATNR and press Enter
2) select MBRSH field click on Source filed(this is the field mapping) select MBRSH and press Enter
3) select MTART field click on Source filed(this is the field mapping) select MTART and press Enter
4) select MAKTX field click on Source filed(this is the field mapping) select MAKTX and press Enter
5) select MEINS field click on Source filed(this is the field mapping) select MEINS and press Enter
finally
save & come back
6) select radio-Button 6 and execute
Maintain Fixed Values, Translations, User-Defined Routines
Create FIXED VALUE Name & Description as MM01
Create Translations Name & Description as MM01
Create User-Defined Routines Name & Description as MM01
after that delete all the above three just created in the 6th step
FIXED VALUE --MM01
Translations --MM01
User-Defined Routines --MM01
come back
7) select radio-Button 7 and execute
Specify Files
select On the PC (Frontend) -- and click on Create button(f5)
give the path of the file like "c:material_data.txt"
description : -
separators as select comma radiao- button
and press enter save & come back
8) select radio-Button 8 and execute
Assign Files
Save & come back
9) select radio-Button 9 and execute
Read Files
Execute
come back
come back
10) select radio-Button 10 and execute
Display Imported Data
Execute and press enter
come back
Come back
11) select radio-Button 11 and execute
Convert Data
Execute
come back
Come back
12) select radio-Button 12 and execute
Display Converted Data
Execute & come back
13) select radio-Button 13 and execute
Start Direct Input Program
--select the Program
--select continue button
--go with via physical file
--give the lock mode as 'E'
and execute
Refer these links,
LSMW
http://www.sapgenie.com/saptech/lsmw.htm
http://service.sap.com/lsmw
http://www.sapbrain.com/TUTORIALS/TECHNICAL/LSMW_tutorial.html
http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
Regards

ABAP for beginner, need help

Hello! I'm PI consultant, and now I need to learn ABAP. Could you advise me some Step-by-step guides on SDN ?
Now I'm really know nothing about ABAP and need very beginning guides.
Thanks!

Hi,
Use the sap help link.
http://help.sap.com
Hope this will help you.
Thanks&Regards

HT4910 i save my photos to camera roll. then back up but can't see it on icloud. why? we just lost 300 photos on my other iphone because we do not get proper help. that's why i need to learn now.

i save my photos to camera roll. then back up but can't see it on icloud. why? we just lost 300 photos on my other iphone because we do not get proper help. that's why i need to learn now.

You can't view your back up files at icloud.com.
You can't view your camera roll and you can't view your Photo Stream files at icloud.com.
The icloud back up plan allows you to "restore" your iOS device from the files you backed up at icloud.com.

Hello, i am new to the mac and i need to learn how to re image using an external hard drive

Hello, i am new, like baby fresh new,...lol, to the mac and i need to learn how to re-image using an external hard drive.

How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

New To Mac's Need to learn how to use it!

I recently have become the owner of a Power Mac G4. I am a longtime pc user and now I need to learn as much about the Mac. Where can I get good clear complete manuals or books on just how the Mac works and how do you move around in one, such as looking at directories, creating the same, installing software programs, etc.
Thanks!

Welcome to Mac-dom!
Here's another great Apple page with lots of instructional videos if, like me, you are a visual learner:
http://www.apple.com/findouthow/mac/
When you start thinking about hardware questions, consider posting in the other G4 forum here. You model number indicates you have a G4 "Quicksliver," one generation older than the ones covered in this forum. The forum labeling is so cryptic that is hard to figure out exactly where to post G4 questions. Either place will work, frankly.
Updating your equipment line in your profile will make it faster to get help. A lot of people don't know an M8493 is a Quicksilver, so use the name instead. Also do "About this Mac" from the Apple menu to find your processor speed and amount of RAM installed. Adding that to the equipment line helps everyone.
I hope you enjoy the Apple forums as much as I do. I've learned a lot here!
A

Need to learn how to create a slideshow in Flash

Hello All,
I'm new to Flash and I need to learn how to do a slideshow with exactly the same features as can be found in this link:
http://www.esppromo.com/index.asp
Just like at the link above, it needs to play through the slides automatically once the page is loaded, each slide needs to link to a specific URL, and I need controls similar to the boxes at the bottom so the viewer can click on any specific slide they wish to view (I'd like to have numbers in the boxes though). The transitions don't have to slide across like this. If a fade is easier, that would be fine.
Since I've looked online, but can't find any tutorials for doing this in Flash Professional, I think I'll pick up a book on Flash. There are some online tutorials that are close but nothing that is exactly what I'm looking for.
I'm just wondering if anyone can recommend a particular book that covers creating this type of slide show with the links and controls exactly as I need it to be. I see these types of slide shows on a lot of sites now, so I'm hoping that maybe someone else on this forum has had to learn how to do this and can recommend a book they used?
I was looking at Adobe Flash Professional CS5 Classroom in a Book and it looked like it may be what I'm after, but I am rather cautious, as I don't want to end up with instructions that are close to what I am looking for, but not quite right.
Actually, I thought I'd be able to do this fairly easily with Flash Catalyst, so I updated to Adobe CS5 Design Premium. I found that Flash Catalyst can be used to create a slide show like this, but unfortunately it won't play automatically when the page loads and the viewer has to manually click through the slides, which is not what I need. I could be wrong, but from what I've read, I need Flash Builder to add code so the slide show will play automatically if I create it in Flash Catalyst. Since it's not an option for me to buy more software at this time, I've decided to learn how to do this in Flash Professional.
I really want to learn how to do this. I expect to go on and create more using Flash, but for now I just REALLY need to figure this slide show out.
If anyone can help out, I'd really appreciate it!
Thanks,
William

Edit:
i'm sorry. it is a huge work to type this and will be confusing as hell. i'm already up to 1 full word page of explanation. Though i am able to do it, explaning it in full lengh is ... well.. very hard. Way harder than it is to make your flash itself.
I can however point you to some element you should read about how to make them:
- How to use timeline in flash cs4
- how to create a button in flash cs4
- How to make "CLASSIC TWEEN" in flash cs4
- How to use ActionScript 2 ( AS2) basic command like : GetUrl, Gotoandplay, Stop and how to put those script in the right location. ( AS2 allow you to put script directly on the button itself. however it is best to put it in the Action Layer that you will have to build in the timeline.
- How to import thing in library.
keep in mind that what you want to make is mostly a Logic probleme...
- Image 1 click = GetURL X,
- After Y time, Switch image 1 to image 2 with animation. Do the same for the button.
- If you click on button 1 while being on image 3, you have to set all the reverse animation in the timeline, and use a lot of Gotoandplay.
Hope this help you a little.
I'm sorry. i really wanted to help you do it, but it is just a monstruous job to write all this.

I am very new to mac products, I have a Mac Pro 13" I need to learn how to use it ? looking video courses any will helpI

I am very new to mac products, I have a Mac Pro 13" I need to learn how to use it ? looking video courses any will help .....

Go to www.apple.com for a start. See, also, Mac Basics.

I need to learn how to use all about java & mysql...help me!

I have a situation here, I need to learn how to use java with mysql
. Can I connect to a MYSQL DB with servlets?
how can I build an e-mail server with java (no matter how difficult)
please, I need help, and I really apreciate your help.
thank you very much!!

I have a situation here, I need to learn how to use
java with mysql
. Can I connect to a MYSQL DB with servlets?Yes... documentation to help you connect to any database can be found at http://java.sun.com/products/jdbc. To connect to MySQL, you'll need drivers (sourceforge.net), and the specific connection URL for those drivers will be included in the documentation.
how can I build an e-mail server with java (no matter
how difficult)If you're fairly new to JSP/Servlets, you may be in over your head here, since an email server is no easy application to code. Here's a link to the source code for the JAMES project... Apache's Java email server... maybe you can find some useful information there...
http://www.ibiblio.org/pub/packages/infosystems/WWW/servers/apache/jakarta/james/source/

[Solved] WM similair to Awesome but without need to learn a PL.

Hello all.
I search for a WM similar to Awesome 3.4 but without needing to learn a programming language to configure it.
I think Ratpoison is nice ,but I can all that I can do with awesome-bar with it pop-up bar?
Is there something like that.
Thanks for that.
Last edited by SpeedVin (2010-03-07 21:25:39)

Dieter@be wrote:any WM as configurable as awesome is, needs some kind of scripting/programming lanuage to configure it. period.
if you want a WM that reads is config from static files (xml, ini-style, etc) you must realize:
1) it's in no way as flexible as something that uses a scripting/programming language.
2) it's not like awesome.
I know about that but by this I mean default built-in bar used by awesome and how it's configurable.
I know that using a PL in config file makes WM more configurable but you know I someone don't understand the syntax of PL in config file I not this.
keenerd wrote:
ScrotWM is similar to AwesomeWM. It is simple to configure, but it also does not have nearly as many features. Personally, I never used those features anyway (like line graphs or spiral layouts).
Here is a bit of the config file:
# set the menu key
bind[menu] = MOD+p
# set a binding to launch a terminal
program[term] = xterm
bind[term] = MOD+Shift+Return
Does not get much simpler than that.
Wow ScrotWM is nice I think it will be really easy to configure it , thanks.

Do ABAP WebDynpro objects need to be added to auth.object S_SERVICE in ECC6

do ABAP WebDynpro objects need to be added to authorization objects in PFCG in ECC6.0?
(Same as we add Java WebDynpro object names to S_SERVICE authorization object in PFCG)
Thanks,
Tiberiu

I found authorization object S_ICF where I can add the ABAP WedDynpro applications.....unless someone else has a different opinion, I plan to close this thread....
Tiberiu

Web Dynpro ABAP application users need a backend su01 account?

Hello Experts
i have been searching the forums trying to determine if all Web Dynpro ABAP application users need a backend su01 account?
thank you for assisting,
regards,
Thabiso

Solved

Advice needed regarding learning path

Friends, I have completed my OCP certification in 11g recently. I want to do OCM in 11g in long run. I need to learn skill-sets named RAC and Performance tuning before preparing for OCM. So what learning can I do next after OCP- RAC or Performance tuning ,any inputs will be highly appreciated !!

921871 wrote:
Thanks for your suggestions. I am already working as a production DBA for last 1.5 years for a organization. My project has no scope of RAC and performance tuning as of now. But I am very eager to learn them. I am confused what I need to start learning first, hence asked. In the long run, my aim is to gain practical exposure, experience along with OCM certification.
I am confused what I need to start learning first
Too many people seem to think learning is linear. Yes, there are some things you have to learn before you can learn some other things. But "learning" Oracle never ends. Pick a subject area (RAC, or SQL, or Performance Tuning, or .. or ..). Doesn't matter which. Spend enough time with it to get a fundamental, working understanding of it. Then do the same with another subject while at the same time keep your eyes open for adding to your understanding of the first subject. "Rinse and repeat". Spend time on this and one or two other high-quality oracle forums. Participate and be willing to take your lumps and learn when you offer advice that is shot down. Build yourself a virtual test system (Opinion | Ed Stevens, DBA) and then break it. And then fix it using only the facilities you would have available to you in the real world.

As an abaper, do I need to learn BI/BO to get in to HANA?

Similar Messages

Maybe you are looking for