As I can send data since a done form with applets to page html?

A question.
As I can send data since a done form with applets to page html?
I thank beforehand its aid.

Please re-write your English.

Similar Messages

I am getting a "not delivered" when I try to send a photo from my Ipad or iPhone via iMessage. I can receive photos in iMessage and I can send and receive photos other than with iMessage. I have tried restoring factory settings etc but no luck.

I am getting a "not delivered" when I try to send a photo from my Ipad or iPhone via iMessage. I can receive photos in iMessage and I can send and receive photos other than with iMessage. I have tried restoring factory settings etc but no luck. Is anyone else having this problem please?

I've been having this problem too, but here's the catch: originally it was only with my dad, and only sometimes. Now it's dad and husband, every time! Pix go through, via imessage, to everyone else, and they go through to dad/husband if I "send as text" after it fails.
And the other annoying thing- the blue bar will run all the way, and it will say "delivered". So I close out of imessage. When I reopen it again, the "delivered" has changed to "not delivered" with the red exclamation point. I just googled "imessage not sending photos" and founds TONS of people with the same problem, but no solutions. (I have rebooted phone, reset network settings, with no luck. I even had to backup/delete/restore my whole phone the other day for a different reason, and hoped that would fix it, but now it won't send to my dad OR my husband (who is on not just the same carrier, but the same family plan as me)

I have purchased a new iPhone on the online store, but how come Apple can send me an repacking old device (with scar on both the border and the cable port)!!!! And after I phone to their hotline for the issue, they asking to give me hk$400 cash coupons??

I have purchased a new iPhone on the online store, but how come Apple can send me a repacking old device (with scar on both the border and the cable port)!!!!
And after I phone to their hotline for the issue, they asking to give me hk$400 cash coupons???? This action make me very angry. I have pay for my goods, but they are giving me some repacking rubbish, and trying to treat me as a beggar????
I have make the request to give me back a new device in good conditions, I will wait and look for what they will delivery.

Do you feel better now that you have vented?
This is a user to user forum... if you want/need assistance, contact Apple directly.

WAD error: done , but with errors on page!

Hi,
when i try to display query on web, it is displaying a partial report with almost no data on the page and right at the bottom i could see the message
"Done, but with errors on page"
what can be done to remove this error?
Thanks,
Ravi

hi Ravi,
try to click the error message, see if it will pop up more detail message.
as mentioned, seems you use some javascript in your web template,
see the detail message and check your javascript code,
it can be object not define etc, please note that it's case sensitive,
so e.g if you use object/variable or call function, check it's exactly same.
hope this helps.

Done, but with errors on page.?

Hi there,
I was wondering if someone can help me?.
I built a site http://www.pawsofeskbank.co.uk/ i had problems with the "£", every time i used the £ it came up with "Ã" i replaced the "£" with "£" this worked great, but now when up open the site at the bottom of the browser it says "Done, but with errors on page.?". I open the details and it says "invalid Charter" line 80 and so on but i have no idea how i get ride of this???
Can anyone point me in the right direction, Cheers

Cheers mate,
Much appreciated, its been driving me nuts for a week…is there any way I could spot that sort of thing if it happens again?
Cheers

Sending Date parameter from the form to Report

Dear Friend
Hi everybody, I am sending the date parameter to my report through a form ,and my date format in the form and in the report as follow : DD/MM/YYYY but when I enter the date as 18/1/2004 the system pass this value as follow : 18-JAN-04 but I want the system to pass my date format as 18/1/2004 not as 18-JAN-04 ,how can I do that
Best regards
Jamil

Ino,
thanks for your answer.
You're all rigth abouth the index issue. So I've written my SQL like you say in your post. But i get an error : "ORA-... Non-character found where character expected... " or something like that. I've checked nls_date_format in my client machine and the server (DB 8.1.7.4), and also the regional settings in both machines, and all are set to 'DD-MON-YY'. What can be wrong?
Thanks again for your time.
Jaime.

I have a scenario, ECC-PI-Message broker. ECC sending IDOC to PI, PI execute mapping and sending data to Message borker.(with almost one to one mapping)., IDOC(AAE)-PI-JMS. Now my requirement is., from PI after mapping we need to save file in SAP fold

I have a scenario, ECC-PI-Message broker. ECC sending IDOC to PI, PI execute mapping and sends data to Message borker(thru JMS channel).(with almost one to one mapping)., IDOC(AAE)-PI-JMS. Now my requirement is., from PI after mapping we need to create file with same data what ever send to Message broker and put the file in SAP folder without touching mapping. Is it possible? Please advise with the steps. We are using the ICO for this senario. Quick response is appriciated.

Hi Pratik,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42?quicklink=index&overridelayout=true
This link might help.
regards
Anupam

How can one encrypt the source code of a given web page(html, jsp, etc.) ?

Good Day! I'm just having a hard time of thinking how to encrypt the source code of a given web page(html, jsp, etc.) without affecting how it is previewed in an Internet Browser. What I plan is to disable the capabilities of some malicious Internet users of copying the source codes of my web pages by using the "View Source" option of Internet Explorer and the equivalent function in Netscape Navigator. Please somebody help me in this matter (I'm planning to use an IDEA algorithm using JCE)....
It would be big help if a running code is supplied.
Thank you very much in advance.
God Bless!!!
- Jonathan Untalan([email protected])

don't know theses softs. What i know about encrypted web pages, is that you need a secure socket connection (https).
Your web page will be ciphered, send to the user, and decipher by the browser with the signature file associated to your https connexion.
It isn't possible to encrypt your page directly, and then decrypt them when requested.
For the download time, only the server is responsible for this.
if it is overloaded, then it will slow down its upload.
Maybe you use some encryption method that require a lot of CPU time.
For summary : you can only cipher the pipe transport, but not the transported pages.
Good luck in your search.

Saving data in Planning web form with about 270 columns failed

Hi all and please help!
We developed a number of planning forms with a lot of columns (business requirement:() and faced issues with entering data in both web form and excel via smartview.
As I undersood already that it's not about 'service.olap.dataQuery.grid.maxColumns' property in essbase.properties file for APS.
For test I developed some planning forms with different number of columns (and only one row) from 255 to 300 and saving stops to work when the number of columns exceeds 257 columns. It's rather close to default value for maxColumns property=255 but not equal. I essbase log we could see short spreadsheeting request and then restarting of Essbase server.
And at the same time if we transposed columns into rows - saving works properly.
Please help!
Thanks in advance,
Gregory Taxelman

Hi, Alp
Thank you for you answer. I've checked your link and it's amazing that information like this was written not in admin but in user guide.
Another thing i've wondered that it depends on setting of Calculate Currencies calc script (run on save). But it's just a think men must know and do I think.
Unfortunately I can't see how does it work, although I've done this settings.
If I set local currency for one of the entity as GBP then I can enter data in GBP of course and Calculate Currencies script runs ok. I can see exact values for local (GBP) and default currency (USD) just on planning form as I set currency dim in page.
But in my case when i set local currency for this entity back to USD entered value in GBP always changed back to USD regardless of Calculate Currencies script settings. It happens during save on the form
Can I get a bit more information about some other settings to be done to make this functionality work?
BR,
Vladimir

Date Validation problem in form with report

Hi,
I am stuck on this date validation issue in a form with report that I am working on-
I have an Active_date_start and an Active_date_end field. I want to validate the form in such a way that if the user enters the Active_date_end < active_date_start then it should error out appropriately asking to change the active_end_date . Also another problem is that the changes are made to the active_date_end they should reflect in the table. How do I accomplish this.
Appreciate all the help offered.
Thanks.

Hi,
Thanks for the code.Now the APPLY CHANGES works fine except that it throws an error when I change the end date to a date which is less than the start date . So it does show me my error and does not go further but also shows me the error -
Invalid PL/SQL expression condition: ORA-06550: line 1, column 29: PLS-00306: wrong number
or types of arguments in call to 'NVL' ORA-06550: line 1, column 7: PL/SQL: Statement
ignored Invalid PL/SQL expression condition: ORA-06550: line 1, column 29: PLS-00306:
wrong number or types of arguments in call to 'NVL' ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
I looked up the error number and it says its a generic error type where the error can be found on the line number specified. But in this case how and where do I look for the error line?. This is the code I am using-
DECLARE
vACTIVE_DATE_START DATE;
vACTIVE_DATE_END DATE;
BEGIN
vACTIVE_DATE_START := TO_DATE(:P4_ACTIVE_DATE_START, 'DD/MM/YYYY');
vACTIVE_DATE_END := TO_DATE(:P4_ACTIVE_DATE_END, 'DD/MM/YYYY');
IF vACTIVE_DATE_END < vACTIVE_DATE_START THEN
RETURN 'End date is before start date';
ELSE
RETURN NULL;
END IF;
END;
My base table has the active_date_start as NOT NULL. Now I have the exact same code for APPLY CHANGES
in other form and it works fine not giving the above error. I am at a loss to know how I can get rid of the error.
Any suggestions!.
Thanks in advance,
A

Can I set up a bracket form with iWorks?

I need to be able to set up pedigree forms for my horse business. Can I do this with iWorks and if so, do I need the whole program or just a part of it?
If it has the capability to draw line of whatever length I choose and space the lines as I wish, I could set up a pedigree in that way.
I can set up a pedigree type form on Text Edit, but it is so plain looking and I would like to be able to put a picture on the document if possible.
If iWorks won't do this, can you recommend a program with a reasonable price that I could use for this?
Sheila K

Yes. Apple now provides an iOS version of the AirPort Utility.

Losing data on a tabular form when submitting a page with validation errors

I have a window that has a regular HTML form at the top that has several items. Then on the bottom of the page, I have a tabular form where the user can enter multiple rows of information. Unfortunately, when the page is submitted, if there are any validation errors, any changes that were made in the tabular form are lost.
Any suggestions

Fair enough :)
Actually what I was meaning was could I use a collection to repopulate the tabular form when I receive errors. It appears as if it may work. However, I am hitting one snag.
I have created a PL/SQL Process that runs On Submit and Before Computations/Validations. In this process, I have saving the values in the tabular form to a collection.
I was then hoping to create another process that ran after any errors occur. However, it does not appear as if any processes run when the screen redraws after a validation issue. Is there a process that runs after validations when the screen is redrawing? Will I need to do this using javascript?
Thanks

Can I combine 2 forms with different master pages?

I have two forms that need to be in one PDF together, but have different master pages. The forms are flowed, so the master pages are necessary to keeping the header and footer content in place. Is there any way to combine two forms?

Hi guys, I figured out a kinda fudged answer.
You can make as many master pages as you need, the problem is getting them to appear on the correct pages. I couldn't get the flowing first page to be as long as it needs, then start using the second master page for the next section. If anyone knows how to do that, I still need to know.
How I fudged this was I put the entire form on the master page in a table to position it correctly and keep it flowed. Then I set the master page to a minimum occurance of 1. - There you go. Not the right answer, but it works.

How can I make Edit/Default Customization form with Java ?

In previous portal relise developers have simple way to rendering Edit/Default Customization form:
<% PortletRendererUtil.renderCustomizeFormHeader(portletRequest, out, null, "services_action", null, null); %>
<TABLE BORDER="0" CELLPADDING="0" CELLSPACING="2">
<TR>
<TD>Days</TD>
<TD><INPUT TYPE="text" NAME="services_days" VALUE="<%= days %>" SIZE="10"/></TD>
</TR>
<TR>
<TD>Rows</TD>
<TD><INPUT TYPE="text" NAME="services_rows" VALUE="<%= rows %>" SIZE="10"/></TD>
</TR>
</TABLE>
<% PortletRendererUtil.renderCustomizeFormFooter(portletRequest, out); %>
In current portal version I can not find these methods, these methods not exists in JavaDoc and in jar's. And all old code do not works!!! Why?
I must hide portlet borders and use <renderContainer>false</renderContainer> in provider.xml. Then portal do not render Edit/Default Customization form in Edit/Default mode. In previous relise I can make this form with Java code.
My question: how I can get Edit/Default Customization form in Edit/Default mode with Java code?
Thanks in advance
Cheslav

Hi George, the trick is to figure out which browser is your default now, and remove that designation using the Android settings for Apps. It might be Chrome or it might be something Samsung provides.
This article has more information: [[Make Firefox the default browser on Android]].
Does it work?

Send the fields of a form with POST method

I have a form based on a table, used to insert news. The problem is that I have to send the fields of the form to another aplication when I push the INSERT button, but I have to send them using the POST method.
I tried to insert code in the event of the INSERT button to do that, but I think it uses the GET method and the other application doesn't receive anything.
Thank's.

FWIW, the usual explanations in regards to this are wrong more often that they are right.
For example, the Acrobat License Agreement says nothing about emailing extended documents or posting extended documents on a web site, but rather simply deploying them.
Also, it only mentions instances of an extended document in relation to how many the licensee may extract information from if the document was deployed to more than 500 recipients and returned to the licensee.
If there are 500 or fewer recipients, the licensee may extract information from an unlimited number of instances of an extended document.
George

As I can send data since a done form with applets to page html?

Similar Messages

Maybe you are looking for