As i'm installing itunes, I have this problem come up I have tried installing reinstalling all components and still doesn't work this is the error message?
"could not write value quicktime task to key \SOFTWARE\Microsoft\Windows\CurrentVersion\Run verify that you have sufficient access to that key, or contact your support personnel.
if anyone can help that would be great thanks!
I have tried that but still doesn't work, I have right clicked the itunes setup right as administrator, still has the key problem, this time, it is the ituneshelper key same location, but ituneshelper key
Similar Messages
-
I notice many of us seem to have the same problem, does anyone ever answer our questions online?
We paid to use this program, we would not have bought the program unless we had a use for it. I thought this would be much faster than OCR, but I am finding that it is worthless unless it works and so far that isn't happening.Hi itsjudyj,
Can you please tell me a bit more about the files that you're converting? How large are they (there's a 100MB file-size limit), and are they text, images, or both? File size or complexity can cause the ExportPDF service to time out before it can process the files.
Other things to check:
Clear the browser cache and try again.
Make sure that you're using a supported web browser (http://www.adobe.com/acom/systemreqs/)
Try a different browser
Please let us know how it goes.
Best,
Sara -
Hi,
my phone is in recovery mode and wont restore. instead i receive the error message 1604. i have used alternative usb cables and am at a loss. has anyone else had this problem?Hi there hstear93,
You may find the information in the article below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
-Griff W. -
I have synced my IPhone 3GS to the newest iTunes version to get IMessage, it worked for a while but now it doesn't work and I have tried resyncing my phone but it still doesn't work. what should I do?
Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device.
If you have been through ALL of the troubleshooting steps and you're still having problems, then you'll need to bring your phone to Apple for investigation. -
I am unable to access my LR5.7 Catalog of my recent holiday. I am running Windows 7 (64Bit) and recently installed and then uninstalled DxO Optics Pro. The error message says it "cannot be opened because another application already has it opened.Quit the other copy of Lightroom before trying to launch" The problem is, that I can only see one copy of LR5 open and cannot locate the ".lrcat.lock" file for the specific catalog I want to open. I have tried re-booting my computer, but this did not work.
Thanks Geoff. I was finally able to locate the ".lrcat.lock" file relevant to the catalog I want to open. Once I deleted it, LR5 was able to access my images. Problem solved. THANK YOU
-
How do I find which photo iPhoto is telling me I have a problem with?
I'm trying to buy a book I've formatted, but in place of the filename, it just calls it "(null)".
All of the photos I'm using have names.That same one others seem to have gotten: "Unable to Assemble Book -- There is a problem with the photo with the filename “(null).” The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your book"
I've tried restarting iPhoto with the option and command keys pressed, and asking it to repair permissions, but still have the same message... -
When I sync my iphone with Windows 7, the contact moves to my computer, but the contact is not complete. No phone numbers. What am I doing wrong? I have also tried sync-ing with Yahoo, and that doesn't work either.
The music sync is one way - computer to iphone. The only exception is itunes purchases. File>Transfer Purchases
It has always been very basic to always maintain a backup copy of your computer for just such an occasion. Use your backup copy to move everything to your new computer. -
I reinstalled acrobat 8 on my computer but when I try to print to a pdf it states that the program isn't activated. I tried to install and reinstall it but it still doesn't work. It shows that it is activated. I tried to deactivate and reactivate but that doesn't help either. Everything else seems to work.
Hi tspcat,
What operating system are you using, and what version? You may be running into a compatibility issue between your older version of Acrobat and the OS that you're running.
Please let us know a bit more about your setup, so we can get to the bottom of this printing issue.
Thanks,
Sara -
Hi, I am wondering why my iphone won't send pictures through messages, I have MMS on and I have tried sending it with 3G on aswell and still doesn't work. Someone please help me :)
Hey lozza567,
Thanks for the question. I understand that you are experiencing issues sending MMS messages. The following resource may provide a solution:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Issues with sending and receiving MMS
You will need these to send and receive MMS:
- An iPhone 3G or later.
- iOS 3.1 or later.
- A cellular data connection. MMS isn't available if you are using only Wi-Fi.
- A domestic MMS plan from your cellular provider. You may need an international messaging plan to send MMS to an international contact. Contact your carrier for more information.
- A roaming MMS when using a cellular provider's network different from your billing cellular provider's network. Learn more about roaming and contact your carrier for more information.
To resolve issues with sending and receiving MMS, follow these steps first
1. Go to Settings and turn airplane mode off.
2. Go to Settings > Messages and turn MMS Messaging on.
3. Go to Settings > Cellular and turn Cellular Data on.
4. Go to Settings > Cellular and turn Data Roaming on if you are roaming on a cellular provider network different from your billing provider's network.
5. Verify that you have a cellular data connection in the status bar at the top left of your iPhone.
6. Go to Settings and turn Wi-Fi off. Open Safari and navigate to www.apple.com to verify that you have a data connection. Turn Wi-Fi back on to continue using Wi-Fi for other features. If your cellular data connection isn't available, follow these steps.
7. Verify that you can send and receive SMS. If you are unable to send and receive SMS, see the "Issues with sending and receiving SMS" section, above.
8. MMS may not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports.
9. Restart your iPhone.
10. Tap Settings > General > Reset > Reset Network Settings on your iPhone.
11. Reseat your SIM card.
If you are still unable to send or receive MMS, follow these steps
1. Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
2. Go to Settings > Messages and turn on group messaging if you are sending a group message.
3. Make sure that you are using the area code with the contact's phone number. When sending messages internationally, you also need the contact's international code.
4. Verify a "Pay as you go" MMS plan has enough available balance. Contact your carrier if unsure of your MMS plan or available balance.
5. If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
6. If the issue occurs with a specific contact or contacts, delete and re-create the contact from the Contacts application. Create a new message to the newly created contact and try again.
7. Back up and restore your iPhone as new.
8. If your carrier has recently ported your phone number, the porting process may not be complete. Contact your carrier to confirm that the porting process is complete.
9. Contact your carrier to verify that you are provisioned to send SMS and are in an area with cellular coverage.
10. Contact your carrier to verify that there are no blocks or filters placed on your wireless account preventing you from sending SMS.
11. Your carrier may require APN settings to be modified to use MMS. Learn more about when you should adjust APN settings.
Thanks,
Matt M. -
I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?
Please quote the exact error message, word-for-word, verbatim.
What is your operating system?
What version of Lightroom? -
Updated iTunes to 10.5, iTunes won't work now! Everytime I open iTunes it just freezes and I can't click on anything. It says to take it out of compatibility mode and still doesn't work! any help??
Thank you. NickOkay, we'll try the technique from the following post. Be sure to be logged in to your usual user account when doing so. (Otherwise you'll be editing the wrong set of HKEY_CURRENT_USER keys.)
Re: How do I turn off the compatibility mode for ITunes.
Does that clear up the compatibility message? -
itunes doesn't open or work after update. Tried everything still doesn't work. HOW CAN I FIX THIS??????
Hello, llynitta.
Here are the best resources for troubleshooting the issue you are experiencing.
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1421
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Jason H. -
I have been trying to download items from itunes store, but keep getting the error message "your Apple ID has been disabled. I changed the password and updated billing information, but still get this error message. This involves free apps which I was trying to install.
I am having the same problem. I went through the process to have the ID unlocked (Changing password etc.) and was able to log in here on the website to post this message. Why am I still getting "Your Apple ID has been disabled" as a message after verifying the account here and signing in and out on my Device. This has been issue on my Ipad as well.
Thanks. -
I am getting an error message with my snap scan ix500 that says the Evernote is not installed properly when I try to transfer it. I have uninstalled/reinstalled evernote and the scan snap softward but it still doesn't work. Anyone know where evernote stores their files on a Mac? Or had this problem.
Are there any dialog boxes popping up behind your Yahoo screen?
I have intermittent problems attaching files in Yahoo mail and this is usually the reason. I'm also using an iMac (10.7.3) and this is likely the problem.
It is generally a Yahoo issue rather than a Mac problem. -
I down loaded the newest iTunes software to update my iPhone 4 and when I open it, it crashes. I have completely uninstalled it twice and reinstalled it again and still it doesn't work. Please help.
- First I would remove and reinstall all the Apple software using the following and then restoring the ipOd.
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
- Next see if manually placing the iPOd in recovery mode will allow a restore. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- Next try DFU mode:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Next try another computer/cable to help determine if you have a computer or iPod problem.
- If the other computer works and yours does not see:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
Maybe you are looking for
-
Ipad no longer 'registered' with my lap top
Hey guys. I recently had to send my lap top away to get repaired.Almost 4 weeks later i got it back...FORMATTED !!!. Now when i try to sync my ipad it tells me that it is no longer registered with this itunes account, when i try to sync i loose every
-
Help! understand cs4 flash "Project"
Ok, In cs3 flash project was nice it did what i needed but now it seems to take more time. the reason may be I'm not using it for the reason usually used so new operations and features where not geared to my usage. sorry for any spelling problems or
-
My ring tones are not listed in my Sounds to select as a ring tone any more
My *.mr4 ring tones show in my library and sync both on phone and itunes, but are not listed in my Sounds to select as a ring tone. Was all setup and working and have vanished when I installed latest update. How can I fix this?
-
I bought the new Compressor and still have cannot 'share' to anywhere
Instead, I get this: The operation couldn't be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1. Help!
-
Showing monitor data via custom MIB ?
Hi, I've run into an incident that caused the CPU of a router to spike to 100%, and in the process lost data. Details apart, I noticed that "max cpu percent" used in the last 5 minutes is not available in MIB (at least not in a 7200 running 12.4). I