As I re installed OS after formatting, I've lost the registration details of FCS 6 X. Based on serial key(bar code key), can I retrieve my registration details?

Ask this question in FCP Studio forum.

Similar Messages

After formatting I have lost the Ilife soft

How can I recover the I life soft lost after formatting due to virus?
Keyboard is losing keys' paint

Wowowowow...
...formatting due to virus?
What virus??? You could become famous as you'll be (one of) the first having one on a Mac!
Keyboard is losing keys' paint
As a result of the 'virus'? Or are you hoping that iLife will bring the paint back, too?
Anyhow...
How can I recover the I life soft
It probably came with your Mac when it was new. As you seem to have received it with Snow Leopard installed, you should have some media from which you can install it.
If not, you'll need to purchase it from the App Store.

I am trying to re-install CS3 after having to replace my Hard drive, but it will not accept my serial

I am trying to re-install CS3 after having to replace my Hard drive, but it will not accept my serial #. How can I get it to allow me to continue using my software?

If you had registered your CS3, you can get the serial number from your Adobe account when you log in through the Adobe corporate web site. Just go to My Products to find it in your account.
Adobe applications show you a truncated s/n to discourage software piracy. Legitimate Adobe s/ns have 24 digits.

Can I re install logic after I purchased it from the app store?

can I re install logic after I purchased it from the app store? They say you can, but it won't allow me. Finally got logic pro 9 loaded. I recorded a test session,saved it,closed logic and when I went to re open logic the next day. My Logic icon was different ( it was the application icon not the silver record icon ) and I am unable to open my session or go to the app store to re install it. I can't find logic pro anywhere in my folders other than the application icon and that won't open.

anybody answer me fast

After updating to iOS 7 the contact photos no longer appear when I receive a call. How can I get them to show again?

After updating to iOS 7 the contact photos no longer appear when I receive a call. How can I get them to show again?

I'm having the identical problem on my iPhone 4 after upgrading to IOS 7--no ability to update apps or download new apps. Here is what Apple tech support emailed to me:
I understand that you are unable to download or update applications after updating iOS7 on your iTunes. I know you must be eager to get this resolved and I will be happy to help you today.
... to help you better with this issue I would request you to please try this steps given below to resolve your issue.
Please follow this steps:
1) Double tap the home button
2) Hold down on an icon
3) Tap the red "X" on iTunes, and the App Store.
4) Tap Settings > Store > Tap your Apple ID, and choose sign out
5) Tap Settings
6) Tap General
7) Tap Reset
8) Tap Network Settings
Once it has been closed with multi-tasking, and you have rebooted the device in the network settings reset, please sign in, and try again.
Howevr, if you are facing the same issue than for this issue, you may need to call our AppleCare technical support team. A technical Advisor will be able to tell you about Apple's complimentary and fee-based support. The technical Advisor can also assist you in determining what option might be most helpful to you in this case.
Mildly amusing that the instructions for force-closing a program are the IOS 6 instructions, which do not work on IOS 7.
Otherwise I'm having a little success with this. Some apps (not all) are updating. It seems that a few more apps update each time I go through the process (close everything, sign out, and either reset or reboot, then go to the app store, sign in and try to update all). So far it has been a very lengthy, iterative process.

After recent upgrade i lost the contacts icon on the screen

after recent upgrade i lost the contacts icon on the screen

Before doing a Reset (which will wipe out a whole lot of things that you have to reenter) check to make sure the Contacts app didn't simply get pushed to another page by the addition of the Newstand app to the first homescreen.

Install acrobat pro when i have lost the original download file?

ow can I install acrobat pro when I have lost the original download file?

thank you so much.
I have just recently subscribed to the CC and am enjoying it so much.
I consider myself to be an accomplished computer user but OMG this is
taking me on such a massive learning curve right now... My brain is about
to explode with all this new found knowledge !!!
There is so much to learn, discover, remember and try out I just don't know
where to start
Getting this subscription made me realise how disorganised my filing system
was, hence why I spent some time sorting it out and accidentally deleted
the acrobat pro files in error (noob mistake I know)
Thank you for helping rectify my problem so quickly

Purchase, licensing, payment Why after i paid $150 for the product do i have to buy a serial number to use lightroom for more then 30 days?

Purchase, licensing, payment Why after i paid $150 for the product do i have to buy a serial number to use lightroom for more then 30 days? Why doesn't a serial number come with my online purchase? should people have to register a product they bought from the same website? why wouldn't this all be tied together with your purchase? total headache.... also i downloaded the free trial for 30 days and when my trial was up i went to buy the product and found it nearly impossible to find without joining something that has a monthly fee. Is this the standard for buying things online these days?

When you purchased Lightroom you should have received an e-mail with your serial number. Better go back and check your e-mails that you received from Adobe. I think one of them should be a receipt, and should have the serial number printed on it.

HT5457 I installed iOS6 on my iPhone4 and lost the Camera. How do I get it back?

I installed iOS6 on my iPhone4 and lost the Camera. How do I get it back?

Welcome to the Apple Community.
Try checking for rentals (Settings/General/iTunes Store/Check for Rentals)

After Mavericks upgrade I lost the current I Movie project I was working on. All that is left is the video clips, no photographs, music, transitions or titles. Three weeks work gone!

I upgraded to Maverick from Mountain Lion.
I also upgraded the various Apple Software applications that appeared after the upgrade to the operating system. I opened I Movie to continue work on a project I was working on and as requested I allowed I Movie to update the projects to allow it to work with the upgrade.
As it was doing this a dialogue box came up showing an error had been encountered and advised me to quit I movie. I did this and when I reopened it the project I had been working on had lost all of the photographs, music, transitions and titles. All that was left were the thirty-seven video clips and nothing else. Where has all my work gone and how can I retrieve it.

rob2433 wrote:
I upgraded to Maverick from Mountain Lion.
I also upgraded the various Apple Software applications that appeared after the upgrade to the operating system. I opened I Movie to continue work on a project I was working on and as requested I allowed I Movie to update the projects to allow it to work with the upgrade.
As it was doing this a dialogue box came up showing an error had been encountered and advised me to quit I movie. I did this and when I reopened it the project I had been working on had lost all of the photographs, music, transitions and titles. All that was left were the thirty-seven video clips and nothing else. Where has all my work gone and how can I retrieve it.
It should still be on your backup drive. Try reimporting it.
Pete

Since I installed Mavericks I seem to have lost the comforting whooooosh that I used to hear when mail was sent.

Since I installed Mavericks I have lost the comforting whooosh I used to get when mail is sent. And I cant find anything in the preferences to get it back.

This happens to me a lot. Quiting Mail, and re-launching brings it back (looks like a bug)

4g and after an upgrade I lost the zoom for my camera

After I updated my camera lost the ability to zoom

Don't you just hate that? Thanks for sharing.
Please post back again when you have a question.

After ios5 update i lost the change button in my contacts so i cant change phones, email, adresses...

After i did the iOS 5 update i lost the ΄΄changes΄΄ button in my contacts. So now i cant change anything...phones, email etc.How can i take the button back?

This is what I fixed to get all my data back - if everything works correctly you shouldn't lose anything... http://discussions.apple.com/thread.jspa?threadID=2478473&tstart=0

G5 won't recognize install disc after formatting

Hi all,
I recently found a G5 tower at my work that wasn't being used. It had a Debian on it so I formatted it with my OS 10.4 disc in order to install tiger but now it won't recognize any kind of startup disc.
When I turn on the comp and hold option it gives me the window where I can choose my startup disc, but no disc is ever found. When I start the computer up with out hitting any keys or holding C it just gives me a globe icon and never finishes booting.
Am I doing something wrong?
Mike

Hi BDAqua and thanks for the suggestions,
the CMD-OPT -SHIFT-DEL key combo didn't seem to have any affect on the computer, and I'm not sure what a firmware password is.
I actually have a couple of install discs, one for 10.3.5 that has the 2Z691 numbering on it, and another for 10.3.7 that has a 691.... numbering on it. I'm not sure which of these came with the computer but they both say power mac g5 on them and neither of them has worked so far. I've also tried using a debian for ppc install disc with no luck on that either.
When I start the computer up it'll either show me a folder with a question mark or square with a globe in it, and when I hold option it'll look for a drive to start from but will never find one.

Can I use the HP Recovery partition after formatting and repartitioning the rest of the hard drive?

I recently had my HP Pavilion dv4 2145dx laptop (Windows 7 64-bit) go kerput. The Geek Squad said that the motherboard died. I've purchased another laptop, and I'm using that one for now, and I am using the hard drive from the old dv4 as an external.
I'm planning to keep using the hard drive from the old dv4 as an external for now, but I'd like to be able to fix the dv4 at some point in the future. Here's the problem: to get the most out of the old dv4's drive as an external, I'd like to repartition it so that there is one NTFS partition and one HFS+ partition. That way I could use it easily with both my Mac and Windows machines.
But if I do that, I'm not sure if the HP Recovery image would still work. If it didn't work, then if/when I get the old dv4 a new motherboard, I couldn't restore the OS from the Recovery partition. This is a problem, because I didn't create Recovery Disks (stupid, I know - I'm definitely making them for the new machine).
So I'd like to do one of these two things:
1) Create my dv4 Recovery Disks. Can I do this if the dv4's drive is mounted in an external enclosure?
2) Format and partition the dv4 drive (leaving the Recovery partition intact), and later recover the system from the Recovery partition. Would the Recovery partition still work under those conditions?
Thanks for any help anyone's got.
This question was solved.
View Solution.

Hi:
Anything you do to the C:\drive will render the recovery partition inoperable.
You won't be able to create a set of recovery disks unless the drive is operable in the notebook.
Can you still read all 25 characters of your W7 product key on the bottom of your busted notebook?
If so, you can do this...
If you can read the 25 character Microsoft windows 7 product key, you can download plain Windows 7 ISO files to burn to a DVD for the version of windows that came installed on your PC, and that is listed on the Microsoft COA sticker on your PC's case.
Burn the ISO using the Burn ISO option on your DVD burning program and burn at the slowest possible speed your program will allow. This will create a bootable DVD.
Or use the Windows 7 USB/DVD installation tool to compile the ISO file you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB method of compilation.
http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool
Use the 25 character product key on the PC to activate the installation.
The key will activate either a 32 or 64 bit installation.
Then go to the PC's support and driver page to install the drivers you need.
Link to the W7 ISO file downloads is below.
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
Or, you can probably still order a set of recovery disks for your notebook from HP.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&tmp_task=solveCategory&cc=us&dlc=en&lan...
Paul

As I re installed OS after formatting, I've lost the registration details of FCS 6 X. Based on serial key(bar code key), can I retrieve my registration details?

Similar Messages

Maybe you are looking for