As I see the "Command denied" in Failed Attempts report

Hello.
In Failed Attempts report, under "Author-Failure-Code" I get "Command denied". Is there any way to record the commands that the user wanted to enter?
Thanks!.

Thanks for responding.
failed in the report do not show me the Command denied . attached configuration.
I am using
CiscoSecure ACS
Release 4.2(0) Build 124 Patch 13
***Tacacs+ Configuration
aaa new-model
aaa authentication attempts login 1
aaa authentication login default group tacacs+ local
aaa authentication enable default group tacacs+ enable
aaa authorization console
aaa authorization config-commands
aaa authorization exec default group tacacs+ local
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 0 default start-stop group tacacs+
aaa accounting commands 1 default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa accounting connection default start-stop group tacacs+
aaa accounting system default start-stop group tacacs+
tacacs-server directed-request
tacacs-server key Presharedciscoxx
tacacs-server host 192.168.1.10
ip tacacs source-interface Loopback0
aaa authorization commands 15 default group tacacs+ if-authenticated

Similar Messages

I have a new HP Officejet 6500A plus. I cannot get it to connect to my Airport Extreme V5.6. It see the wifi signal but Fails on "Filtering" and possibly the channel. Does anyone know how to reset or reconfigure filtering

I have a new HP Officejet 6500A plus. I cannot get it to connect to my Airport Extreme V5.6. It see the wifi signal but Fails on "Filtering" and possibly the channel. Does anyone know how to reset or reconfigure filtering and channel on the old airports?

This is a part of the larger MacBook Pro connectivity issue. There are several related threads dealing with the MBP's networking problems. If your unit is suffering from this type of difficulty, good luck ... (or a long ethernet cable)
(PS Everybody please make noise on this one so apple comes up with a solution.)
< Edited by Host >

Wbadmin in powershell: ERROR - Command syntax incorrect. Error: Component'. See the command

Hello,
I want to backup server from powershell script:
wbadmin
start
backup
-backuptarget:\\?\Volume{3651776b-fc60-4ccb-af2b-48b702256f55}
-hyperv:"ComputerName1,Host
Component" -vssfull
-quiet
but I am gettting following error:
ERROR - Command syntax incorrect. Error: Component'. See the command
syntax below.
In CMD it works fine but I am unable to get it working in PS. Can anyone help? Thank you.
Pete
sfs

Please see the following article for how to pass arguments for executables in PowerShell:
Windows IT Pro: Running Executables in PowerShell
Basically all you should need to do is quote the entire argument to the -backuptarget parameter, as in:
"-backuptarget:\\?\Volume{3651776b-fc60-4ccb-af2b-48b702256f55}"
You probably also need to quote the entire -hyperv argument as well:
"-hyperv:ComputerName1,Host Component"
You can use the ShowArgs.exe tool in the article download to see the actual command line that PowerShell is really passing to the executable.
-- Bill Stewart [Bill_Stewart]

Airport see the drive but "connection failed" when trying to connect.

Hello everyone.
I connected a USB drive to my airport extreme. it does show in finder but whenever u try to access it I get the.
I can also see the drive in airport express utility but nothing shows up in Airport Disk Utility!
Any ideas???

Hello all-
I have the same problem. I have a WD 250GB My Book Drive (FAT32 Formatted). When I connect the drive to the AEBS, I get two problems:
1) When I select the option to secure the disk with the Airport Base Station Password, and then enter the password when asked, I get an error "User ID and Password are incorrect." However, if I secure it with a disk password, there is no problem.
2) My drive shows up as a Shared Drive in Finder, and I can read and write to it with no problems. However, it does not show up in the Airport Disk Utility as an Airport Shared Disk. Also, it does not show up in the menu bar either as a shared disk.
Any ideas?
Message was edited by: P-Train

I can't see anything! The websites are either all black, or all white. The farthest I have gotten to seeing anything was the Google page, and that went black immediately. I cannot even see the commands at the top of the page!

I just downloaded the most Recent version of Firefox and I cannot see anything. Everything just goes blank, and I can't even see the toolbar up to try and get into the settings!

Did you check the default text and background colors?
*Tools > Options > Content : Fonts & Colors > Colors :
Also check [X] "Allow pages to choose their own colors, instead of my selections above"<br />

How to see error message for a failed crystal report in CMC BO XI 3.1

Hi,
I do not have much knowledge on CMC.
Currently there is a crystal report failing on server.
I can see the error message on CMC as "Object failed to run due to an error while processing on the Job Server".
Is there any way i could see the actual error message causing this issue.
Attached is the error message.
Please suggest.
Thanks
Rahul

Hi rahul,
Can u try these
:Object failed to run due to an error while processing on the Job Server.
2 )Object failed to run due to an error
3 )Object failed to run due to an error while proc... | SCN

User cannot see the "-" signs on amounts in ALV report

Hi all,
We have a problem with a user, who cannot see the signs on the amounts in an ALV report:
<a href="http://img66.imageshack.us/img66/1424/nataliabr9.jpg">Report without signs</a>
The user has tested this report with his user, and another test user, on his computer and on another computer. It does not change anything, he cannot see the signs "-" on the amounts.
But when I launch the same report on the same client, I cann see the signs:
<a href="http://img398.imageshack.us/img398/1203/moigl3.jpg">Report with signs</a>
So, I think it does not come from his user (he has tested with two different users), or from his computer (he has tested on two different computers).
Do you have any ideas?
Thanks for your help.

Having seen and "played" with an NB100-12a the other day I must agree that the grey letters on black keys
aren't a clever idea - its bad enough that the keys are so small also.
I currently own a satellite Pro with which I am very happy ( apart from the inclusion of Windows Vista which I
don't particularily like ) and found this machine easy to "drive" BUT due to the keyboard size and lettering
I won't be buying one ( unless they do a redesign - an acer aspire one keyboard and touchpad or NC10 style
design ) and I think that the price of these machines has recently dropped from approx £300 to approx £270
due to poor take up by the public mainly for the above reasons.
Sorry Toshiba looks like i'll be buying an NC10 - unless I hear of a possible redesign.#
Mike

Unable to see the SD billing revenues in COPA report

HI,
I am doing the COPA report. Ours is a service providing company and hence no MM is used,
we create a sale oreder afor services, invoice the same and bill the same.
The characters I have used are Country, Company Code, Sales Employee, Customer, Sales Order, Region,Project and Employee.
The value fields I have used are Revenues and Caost of goods sold.
I have selected both the Account based and costing based COPA .
I am able to see all the direct expenses in all the dimensions, but while I post a sale order and pass an invoice and later bill it, that billing amount is not captured in the COPA report.
I have checked KE4I and I have already given the link from SD to COPAi.e, I have linked
PR00 (Price) from SD to VV010 (Revenue) in COPA
VPRS (Costs) from SD to VV140 (Cost of goods Sold) in COPA.
I am also able to see the billing document comming and sitting in accounts in FB03.
But, unable to find out why the revenues are not flowing from SD to COPA.
PLease let me know where else I have to check.
Thanks in advance,
Shilpa.

Hi,
I assume the CO_PA document itself is created but the revenue value is missing (value field VV010 is empty).
As an addition to Ajay's posting ensure that your value field VV010 is not resetted for the billing doc. type in T-Code KE4W.
And check also, if there is some coding in include ZXKKEU08 activated/processed which might manipulate the values from this value field.
Best regards, Christian

Anyone else seeing the page-curl bug I just reported to Apple?

Here's the bug:
If you import AVCHD footage into iMovie (or even a screen recording made in QuickTime Player) in "Large" (not full size), the page-curl transition will corrupt when iMovie tries to play it back at the original footage's size or larger (i.e.,the effect will corrupt if you have the editing sub-window showing fairly large in the main editing window, or if you use full-screen playback, or you export the final project in a large size, such as 720p, to iTunes). This doesn't seem to affect footage shot with a Mac's iSight camera.
What will happen is, in, say, a 25-frame-long page curl (either right or left), roughly Frames 5, 6, and 7 will show plain dark gray, where they're supposed to be showing those frames of the first clip in the transition.
I've been able to reproduce this bug in iMovie 9.0.7 and 9.0.6, on both a late 2009 iMac i7 and late 2009 13" MacBook Pro. My AppleCare Senior iMovie technician was able to reproduce this on both a 2010 and 2011 21" iMac. (I wonder if this also appears in Final Cut Pro?)
I first noticed this when I upgraded my OS from Snow Leopard (OS X 10.6) directly to Mountain Lion (now running 10.8.1), as Mountain Lion "broke" every single page curl in every single project I'd made in iMovie (which had worked fine until then) over the last two years. I don't know if this bug was introduced in Lion, since I skipped that OS. Anyone out there know/care to run a test?
The AppleCare tech told me that the chance of this bug's getting fixed depends, in part, upon the volume of users like you who report it to Apple (at www.apple.com/feedback/imovie.html), and here on the boards.
So chime in (here, and at the feedback link above) if you have any observations to add. Thanks!

I saw something that appears to be possible curl corruption today in:
curl 7.21.4 (universal-apple-darwin11.0) libcurl/7.21.4 OpenSSL/0.9.8r zlib/1.2.5.
It stopped outputting the response content 9 characters before the end of the endline-less response and started spitting out a long string of characters that were based on the next thing it was trying to output which was the prompt:
Last login: Wed Sep 19 18:06:37 on ttys001
(my prompt that starts with mac-...)$ curl -v -H "Content-Type: application/json" -H "Accept: application/json" -X POST -d '{"name":"testing"}' http://localhost:3000/companies.json
* About to connect() to localhost port 3000 (#0)
* Trying ::1... Connection refused
* Trying 127.0.0.1... connected
* Connected to localhost (127.0.0.1) port 3000 (#0)
> POST /companies.json HTTP/1.1
> User-Agent: curl/7.21.4 (universal-apple-darwin11.0) libcurl/7.21.4 OpenSSL/0.9.8r zlib/1.2.5
> Host: localhost:3000
> Content-Type: application/json
> Accept: application/json
> Content-Length: 18
>
< HTTP/1.1 500 Internal Server Error
< Location: http://localhost:3000/companies
< Content-Type: application/json; charset=utf-8
< Cache-Control: no-cache
< X-Request-Id: d9dc4adfc8cbf612feedc3d52b17c0b4
< X-Runtime: 0.150121
< Content-Length: 89
< Server: WEBrick/1.3.1 (Ruby/1.9.3/2012-04-20)
< Date: Thu, 20 Sep 2012 12:23:45 GMT
< Connection: Keep-Alive
<
* Connection #0 to host localhost left intact
* Closing connection #0
{"errors":["No route matches {:action=>\"show\", :controller=>\"companies\", :id=>mammamacmacmac-mmac-mac-mmac-mac-mac-mmac-mac-macmac-macmacmac-macmacmacma cmac-mac-macmac-mamacmamamamamamacmacmamacmamammmmmmmmmmmmamamamamamacmammmmmmmm
followed immediately by my prompt which begins "mac-". It did this only once when I ran it as the first thing in that terminal session.
Feel free to post that in your support ticket or send me a link and I can post it. There is definitely a bug.

What happens when you reach the maximum number of failed attempts on the lock screen password of iPod Touch?

Do you get the screen that says, "iPod is disabled. Connect to iTunes", or do you get that screen when you reach the maximum number attempts on the restrictions password?

Thank you. I am out of town traveling and my daughter sent me a picture saying the got the before mentioned message. She told me she forgot her lock screen password, and that just boggled my mind considering she locks and unlocks that thing 1000 times daily. I automatically assumed she was trying to guess the password I put on the restrictions page.

Can't see the Vertical line command in the main window of SAP Script.

Hi,
I have a peculiar situation where, I am not able to see the command through which vertical line separators are coded in the script within the main window. Can any one help me find this...?
Regards,
Owais...

Hi Ravi Kant,
       What does this mean?
/E           ITEM_YWERT
WH           &rwerter-wert(10)&,,&vline&
/E           ITEM_TAB
/:           CASE &VARPOSR-YZEILE&
/:           WHEN '0001'
/:           DEFINE &TAB& = ',,'
/:           WHEN '0002'
/:           DEFINE &TAB& = ',,,,'
/:           WHEN '0003'
/:           DEFINE &TAB& = ',,,,,,'
/:           WHEN '0004'
/:           DEFINE &TAB& = ',,,,,,,,'
/:           WHEN '0005'
/:           DEFINE &TAB& = ',,,,,,,,,,'
/:           WHEN '0006'
/:           DEFINE &TAB& = ',,,,,,,,,,,,'
/:           WHEN '0007'
/:           DEFINE &TAB& = ',,,,,,,,,,,,,,'
/:           WHEN OTHERS.
*           Tab. not defined
/:           ENDCASE

Could see pending command in v$sqlarea

Hello,
Please see the command and output below :
SQL> select FIRST_LOAD_TIME,SQL_TEXT from v$sqlarea where users_executing > 0;
FIRST_LOAD_TIME SQL_TEXT
2005-11-11/16:45:50 SELECT * FROM ratl_oplog
2005-11-18/14:44:01 select FIRST_LOAD_TIME,SQL_TEXT from v$sqlarea where users_executing > 0
The first entry in the output is pending since 11th Nov...and I think this is reulting in performance problems in my database.
Can somebody suggest some way to solve this issue..??
Thanks, Rajeev

Hello,
first off all have a look at select * from v$session_longops;
To solve this problem alter system kill session.
regards,
juergen_klinsmann

Time delay on seeing the changed data onto the webi reports

Hello,
I'm new to BOBJ and was hoping someone can help me with adjusting the time delay the reflects the changed data to the Webi reports.
I have a user that would update a form on our EP. Afterward, she would have to wait a while before she can see the changed data on our Webi reports.
can you please tell me the default time lag and show me where I can change it if required?
thanks.

Thanks for the reply.
Our BO is 3.1 SP4.
We just implemented PBF (Public Budget Formulation) and our forms are running on NWCE server. It's being written to our backend BW 7.01 SP8 server. I was told by our users that after she updates some new information on the form, it takes a while before she can see it on the reports. My understanding was the universe should see the updated data from our BW immediately after they refresh. Just as you both mentioned. But according to the users, its not. there's a time delay.
I'm going to test this myself if there's a delay. In the meantime and suggestion would be helpful.

Aaa max failed attempts/RADIUS

Is there an aaa command or server command that limits the maximum number of failed attempts one can try before getting cut off. I note there is one for local. but I fail to find one that applies to aaa that is auth against radius. am I missing somthing or does this not exist.
Or will I have to use aaa accounting, and work this out on my radius server/database schema. anyway, I would
rather not have to work through the details that way, I would prefer there be a way to do this via IOS....this is IOS 12.3 not pix/asa
Thanks for the help!
cg

have you tried, this command,
aaa authentication attempts login number-of-attempts
By default, if user fails authentication (no authorization), then user is allowed 3 attempts. This can be changed using above command.
In above case I am talking about administrative authentication to the device.
Regards,
Prem

"Disable account if failed attempts exceed x on" group object

When setting up a group in ACS 4.1, how do you include the "disable account if failed attempts exceed x" on the Group object. I see there have been some topics on this for older ACS versions (3.x) where it was not possible. Just wondering if anyone knows if this is possible on ACS 4.1 or possibly 4.2?

Hi,
In newer version also 4.x, this can only be set on only user setup.
Can't set this on group level.
HTH
JK
-plz rate helpful posts.

As I see the "Command denied" in Failed Attempts report

Similar Messages

Maybe you are looking for