As identify if the call is stuck in the gateway h323

Hi Guys,
I would like know as is possible identify if the gateway h323 is stay stucking calls. What the command is used to verify this?
Thanks,
Wilson                   

Are ALL calls stuck in queue and never reaching an Agent?
Or is Supervisor Desktop just showing 1 or 2 calls "stuck" in queue, but most regular calls reach an agent?
Also what specific version are you running? There were some bugs in early 8.0(2) releases about calls showing in queue that weren't really there.  If however your problem is real callers not reaching agents, it probably sounds like a skill or resource group problem.
Tom

Similar Messages

  • UCCX 8.0(2) - As identify that the call is stuck in the queue

                    Hi Guys,
    My Customer complain that there are any Agent Ready, but, any calls are statying stuck in the queue. I read the documentation about the Cisco Site and the forum below, but, not is clear for me.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_0/configuration/guide/uccx801ag.pdf
    https://supportforums.cisco.com/message/3070648#3070648
    I would You like understand as identify that the calls really is stuck in the queue? Anybody explain for me
    Thanks a lot,
    Wilson

    Are ALL calls stuck in queue and never reaching an Agent?
    Or is Supervisor Desktop just showing 1 or 2 calls "stuck" in queue, but most regular calls reach an agent?
    Also what specific version are you running? There were some bugs in early 8.0(2) releases about calls showing in queue that weren't really there.  If however your problem is real callers not reaching agents, it probably sounds like a skill or resource group problem.
    Tom

  • Hello, I have an iPhone 4s, I noticed that when I am on a call (Phone) and I am done and I go to hang up, the iPhone is stuck on the screen and can not get new calls

    Hello, I have an iPhone 4s, I noticed that when I am on a call (Phone) and I am done and I go to hang up, the iPhone is stuck on the screen and can not get new calls or call to a new call

    Is there a case on the iphone?
    If so, then remove it and see if that solves it.
    Otherwise, make an appointment at the genius bar.

  • On my canon powershot A3300IS the lense is stuck in the extended position and will not close

    I have a canon powershot A3300 IS  the lense is stuck in the extended position and will not close. How can I fix this myself?

    Forneypamela,
    Please remove the battery from the camera for a few minutes.  Then, put the battery back in the camera and power it on again.  If the lens is still stuck in the extended position, the camera is going to need service.  I apologize for any inconvenience this may cause.
    To start your repair process, you'll need to complete a Repair Request on our website.
    If the camera is more than a year old, you may participate in the Canon Loyalty Program instead.  The Canon Loyalty Program option allows you to replace your current camera for a discounted fee, plus shipping.  The unit offered through this program carries a 90 day warranty.  The original non-functioning camera would then be returned to Canon USA for recycling using a prepaid shipping label that would be provided.
    If you would like to take part in this option, please call our Sales Department at (800) OK CANON (800-652-2666) seven days a week, 8am to Midnight.  Let them know you have been working with online support and the Canon Loyalty Program was offered.  Be sure to have your serial number for your camera at the time of your call.
    If this is a time sensitive-matter, additional support options are available at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • I tried to restore my phone this morning, but the phone is stuck on the screen showing I'm plugged into itunes. I have no service, and although my device registers in itunes, the right side of the screen is blank. I can't use my phone. Help!

    I tried to restore my I Phone today but now its not working. The screen is stuck with the plug in picture, and only allows me to make emergency calls. It says I have no service and I can't use my phone.
    Why does the device show in the left hand side of I tunes, but the right hand side is blank and shows no options?

    Walter...seems to be a multiplying problem. My problem appears to be the same:
    (Original iPhone Restore...HELP !!!
    I was having syncing issues with my iPhone (an original) and ultimately took the step to restore the factory default settings in an attempt to start over from fresh...iTunes 'sees' the iPhone device and seems to go through all the requisite restore, load, verify steps, but I can't get the iPhone to load the main menu. I continue to get a window that shows a USB Cable pointing to iTunes...I have had 800 call support technicians and genius bar techs look at the problem without result.
    Anybody run into this problem or have any ideas how to resolve? Thanks in advance for any assistance you might offer! regards, mdh)
    That was a post I put in LinkedIn hoping to find someone with a similar experience and perhaps a solution. Had intended to post here...then saw your post of what appears to be the same issue.
    HEEEEEEEEEEEELP! I want my iPhone back (please)

  • Just turned on my MBP 2007 and the screen gets stuck on the light blue before the normal log in page comes. Any Clues?

    Just turned on my MBP 2007 and the screen gets stuck on the light blue before the normal log in page comes. Any Clues?
    Worked fine last night. It's running Snow Leopard.

    Does your iMac fail to boot every time or only some of the time?  Here are some things to try:
    - Boot into "safe mode", which will run the equivalent of Disk Utility's "repair disk" operation.
    - Boot from the system install disc that came with that Mac with the "D" key held down to run the diagnostics.  Run them several times to see if any hardware problems are reported.
    - If you can't identify the problem or fix it any other way, download and install the OS X 10.6.7 "combo" updater.
    - If that still doesn't help, try reinstalling OS X 10.6 over the top of what's on the disk.

  • My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

    My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

    Hello SamSax
    Check out the assist page below for troubleshooting call connectivity.
    Calls and connection issues
    http://www.apple.com/support/iphone/assistant/calls/
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • The call was cancelled by the caller before the remote party answered

    Hi,
    We have a Lync 2010 Enterprise deployment in a single site with 2 FE and Mediation Server collocated.
    When dialling a number from a PSTN phone the call gets routed via our PBX/PBX Gateway/Mediation Server/FE Server to the desktop Lync client successfully.
    As soon as the user answers the call with the Lync client the call 'hangs' and terminates without hearing anything on either side.
    The snooper logs show:
    Error:
    SIP/2.0 487 Request Terminated
    Partial Content:
    User-Agent: UCCAPI/4.0.7577.4398 OC/4.0.7577.4398 (Microsoft Lync 2010)
    Ms-client-diagnostics: 52092;reason="The call was cancelled by the caller before the remote party answered"
    Content-Length: 0
    Please help?
    Vinkie

    What kind of gateway are you using to connect to your PBX and how?  What is your media set to?  G.711 μ-law or a-law?  I'd check media settings there as a starting point. 
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".

  • My facetime starts connecting then fails to make the call ? ive tried the swtiching face time off switching macbook off then switching it back on the logging back in to facetime but still no joys. any help ?

    my facetime starts connecting then fails to make the call ? ive tried the swtiching face time off switching macbook off then switching it back on the logging back in to facetime but still no joys. any help ?

    my facetime starts connecting then fails to make the call ? ive tried the swtiching face time off switching macbook off then switching it back on the logging back in to facetime but still no joys. any help ?

  • Nokia N70 disconnect the calls and turn on the lou...

    Hi Dudes,
    I have Nokia N70 now i am facing the problem in N70 that is my Nokia N70 disconnect the calls and turn on the loud speaker automatically. i had gave my phone to nokia care center to fix this Bug. When i gave the phone the IEMI Number was same that is mentioned on the N70 Box, but now i have took my N70 back from the nokia care center i am facing the same problem again and my IEMI Number do not match my actual N70 Box.
    I am confused and afraid that something has happened to my phone.
    Please tell me what to do know...
    Urgent and quick response needed

    sounds like you there could of been a mix up or you got a recondintioned unit back try a factory reset and see how you get on did you not get a report from nokia?
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • I occasionally get a call and at the end of the call, it sounds like the camera is taking a picture.  Anyone else ever experience this

    I occasionally get a call and at the end of the call, it sounds like the camera is taking a picture.  Anyone else ever experience this?

    No, but when the other party hangs up first I have heard the click of the disconnect.

  • Why doesn't the iPhone 5 have the call bar feature like the 4S does?

    Why doesn't the iPhone 5 have the call bar feature like the 4S does?

    From the Swype website:
    Why isn’t Swype available for iPhone/iPad/BlackBerry/Windows Phone?
    Due to the technical design of some operating systems, it is not possible for third party keyboards (such as Swype) to be offered at this point in time. Please communicate to your device/OS manufacturer that you’d like to see Swype available as a keyboard option!
    Here is the link:
    http://www.swype.com/about/swype-faq-3/
    Cheers,
    GB

  • Error while executing the call list maintenance from the UI ???

    Hello All
    I am using CRM 6.0
    I am want to open the call list maintenance  from the IC manager screen the system sues transaction launcher to open it, the URL link defined in the back end is :
    sap/bc/gui/sap/its/webgui/!?~transaction=CRMD_TM_CLDIST
    but when the system calls the transaction, I got the error:
    Transaction CRMD_TM_CLDIST?SAP-C is unknown
    Then I have the SAP menu
    Regards
    Jacopo Françoise

    Hi
    i think this transaction can be called only in SAP GUI.
    SAP has left some transactions (especially those for managers) in SAP GUI.
    Regards
    Radek

  • Why is the call history time on the printout different than the phone?

    Why is the call history time on the printout different than the phone?

    How much different is it? A minute or two??
    Calls are triggered the minute you hit send, not answered. And the same when ending a call. So if off a minute or two for a call that is why.

  • Running a program on a disk and the window is stuck in the upper right hand corner, cant move it bc the menu bar is hidden, help?!

    Im running a disk from a text book and the window is stuck in the corner and i cant seem to get it to move. Ive tried restarting the computer and the disk, moving it to trash, changing screen resolution, using mission control, command+M, and nothing is working. Everytime I open it up it goes back to the same location on the screen. HELP!

    Remove the disc and don't use it again. 

Maybe you are looking for

  • EJB 3.0 Environment Variables

    I am trying to create environment variables within my project, but it doesn't seem to recognize the env-entry within the sun-ejb.jar.xml file. I am using EJB 3.0, which could be the problem... is there a replacement for env-entries? If yes... what is

  • Which way is used to allocate/deallocate memory for locals?

    Good afternoon. I would like to know how memory is allocated/deallocated for local variables in an activation record/frame. For example, in the following java code: 1 public void test() 2 { 3     {           4          { 5               String y = "a

  • Duplicate entry for WebUpdatePassword

    Hi, After siebel installtion , I found there is a duplicate entry for WebUpdatePassword in C:\sea78\SWEApp\BIN\eapps.cfg file. i.e. I can able to login to the siebel GUI after remove the duplicate line i.e "WebUpdatePassword = xxxxxxxxxxxxxxxxxxxxxxx

  • Slide show that wont go away

    I have a Muse slide show that will not go away.  I deleted it and uploaded the new files and it still shows up on the server.  I deleted the entire server and it still shows up. Ive quit Muse, reinstalled it and even did the 2014 update and the slide

  • Microsoft exchange server on C3

    Hi! Despite looking all around, I couldnt find a way to connect to my office mail on microsoft exchange using my Nokia c3. Isnt there a way out? Please guide me indetail.