As im recording videos on Photo Booth, my movements seem late. then when i play back the video, the sound comes in really late. how do i fix this?
theres like a 5 second delay from when i say something to when the sound of my voice actually comes in when i play back movies in photobooth.i tried restarting my computer and even turning on *auto flip new items. when i turn that on the problem is fixed for only one video. when i try to record the next one its back to the delay. is there anyway to trouble shoot this? or do i have to take my mac to the apple store. to top it all off ive only had my computer for 5 days. help please !!!!
I had the same problem since my moutain lion update, too.
I fixed it in the following way.
-Search for utilities on the HELP option on the top taskbar
- Go to utilities and open your audio-midi-setup.
- check your input and output properties
- Change input and output 44100khz and 16-BIT for both.(these are the most common properties)
my sound and video are not ouf sync in photo booth anymore.
let me know if it works for you!
cheers
Similar Messages
-
When i move my video into the timeline its zoomed in..how do i fix this? Please tell me what I can do to fix this. I may need to be walked through the process.
Your sequence settings do not match the footage specs.
Mylenium -
after exporting a video from imovie, to quicktime, the audio has been duplicated. How can I fix this?
iMovie works best with uncompressed audio. If your track is MP3 or AAC, you may get better results by converting your track to the AIFF format and then using that in iMovie.
You can do this in iTunes. Go to iTunes/Preferences and click the General button. On the General page, click the Import Settings button. Choose IMPORT USING: AIFF ENCODER.
(note: remember what you changed it from so you can change it back later, before you import another CD)
Now, in iTunes, select your track. Then click FILE/CREATE NEW VERSION/AIFF VERSION. -
Everytime I open iphoto, my computer tells me, A photo has been found in the iPhoto Library that was not imported. Would you like to import it. If I import it, a message comes up Unreadable file, the following file could not be imported. them it tells me where the file is and it cannot be opened. If I do not import, then it says,The photo has been placed in the folder /Users/patrick*******/Pictures/iPhoto Library Recovered Photos_4. It will just keep adding to recvovered photos. This drives me crazy!!!!!!! How do I fix this?
I had this problem some months ago and the following solution from Terrence Delvin put things right:
Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for a Folder called 'Import' or 'Importing'.
Drag it to the Desktop. *Make no other changes*.
Start iPhoto. Does that help?
If it does then look inside that folder on your desktop. Does it contain anything you want? If not you can trash the folder.
However, since connecting a memory stick to my computer, I now have the same problem again. This time there is no folder called 'Import' or 'Importing' so what should I do? -
Whenever I play videos, I get a green screen. How do I fix this?
Hi,
I have an iPod Touch 4th generation running on iOS 6.1.6. Whenever I try to play a video of any kind (via Youtube, Vine, videos I've taken, etc), only the audio works and I can only see a green screen (sometimes black). This problem happened to me before, but the videos worked normally after about a week. But now it's been like a month. Does anyone know how I can fix this? I tried to reset settings, turning it off/on, erasing all website data, but nothing is working....- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device. -
When I talk on Skype or record something, even my system sounds can be heard. How do I fix this?
When I use Skype or record something, everything can be heard: not only mi internal mic, but even system sounds. I tried lowering the mic volume to 10, but nothing changes.
Any suggestions?It all depends a bit on how & what you backed up, and how you restored it. Select an affected track. Press CTRL-I to Get Info. Click Cancel when asked to locate the file. Look at the location given on the summary tab. Now look through your computer for file in question. What are the two paths? iTunes could be using the wrong layout (pre or post iTunes 9) in error. Or your library could have been split on the previous system, and not restored to preciesly the same path. Posting back the two paths should make things clearer.
tt2 -
what settings in preference and project settings can i set to fix this. i have a windows desktop
asus m11
windows 8
64 bit
intel core i5
2.8 ghz
8gb ram
i hav the software on my c drive and in scratch disks preferences i have the rest on my 2tb external drive same as project. thanx in advance...........FNGTF84
Thanks for the follow up. Sorry that the news was not better.
As for project settings (project preset)....that should be set to match the properties of the media that you import. Only one project preset per project, so, if you have more than one format, you need to set priorities for the project, and then work everything else around that prime choice. But, for now, assuming all the project content have the same format.
The program is set up to have the project select the project preset based on its analysis of the properties of the first source you drag to the Timeline. If it cannot do that for some reason, it does not give you the closest project preset for what you need, instead it gives you its default NTSC/AVCHD/Full HD 1080i30 or its PAL counterpart if you are working in a PAL setup. You can always check to see what the project set. See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Size, and Pixel Aspect Ratio (even if they look grayed out). You can view project settings there, but you cannot make significant changes in what has been set. So, you start a new project if the settings are not right.
The manual way for you to set the project preset....
File Menu/New/Project and Change Settings
In Change Settings, change the project preset to match the properties of your source file. OK out of there.
In the New Project dialog that you see next, change the name of the project, and make sure to have a check mark next to Force Selected Project Settings On This Project. OK out of there.
Back in the Expert workspace, import your source media using the project's Add Media/Files and Folders.
If you setup according to my suggestions in post 3 and are still have previewing issues, then I think we should look deeper into the video card/graphics card. See Device Manager/Display Adapters to verify what your computer is using. And, then go to the web site of the manufacturer of that card to determine if you have the latest driver for that card.
Please consider.
Thank you.
ATR -
My video will play on keynote only on my mac, not my iPad how do i fix this?
I have a video that will only play on the keynote on my mac. when i switch it over to my ipad it wont work! only on my mac will it work, i just do not understand what is wrong. I've also emailed this video to another computer (that didnt have Quicktime Player), it wouldnt play. The video only works through Quicktime too. Another thing is, its not an .mp4 file, instead its an "MPEG layer 3, GIF"... weird, i dont know what to do could you help me out please?
The only video formats that will play on iPad are these:
H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
MPEG‑4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format -
So I can no longer hear the sofware amp/effects while I'm playing my guitar , but I can hear the software amps/effects during playback after I have done a recording . What's up ? This has happened after my last GarageBand update . I'm using an Apogee Duet .
BryanI am monitoring through my KRK 8's. I have changed nothing other than the update . I used to be able to hear all of the amps/effects real time , but now it is only after the recording is done and I play it back that I can I hear the amp/effects that I selected for the recording .
-
WHen i sync my new iPad Air IOS 7 , all my photos sync in landscape mode. How can I keep the original orientation of photos? If I edit and rotate, it is saved in camera roll, not in the album.
Just to conclude, and give hope for any still suffering, I succesfully upgraded my iPAD to ios5 yesterday evening.
I did have a conversation with Apple support a couple of days agao, in line with many others I was given various reasons why things oustide the Apple environment might be the root cause such as
- ports blocked on the network I was using (although when I asked which ones they weren't certain - "80 and 442 we think" was the response
- a fault on the iPAD
- slow network connection
The more interesting part of teh conversation was Apple was that the firmware update part of the install actually involves quite a lot of interaction with apple servers. My conclusion would be that the well documented performance problems in the early days after ios5 release were the root cause of my problem - reference to network ports. iPAD faults were just a smokescreen.
My key learning - don't upgrade soon after a major release, I already knew this but when offered an update I didn't go back and check precisley when it had been released so I should have paid more attention :-) -
Continuing from the original question above...
The full error message reads:
Application Error
General Exception
Name: com.aurigma.imageuploader.ImageUploader
ClassNotFoundException: com.aurigma.imageuploader.ImageUploader.class
This seems to be tied in with an update to Java 7, but my software won't allow me to proceed w/o the update. As soon as I update Java, the system gets corrupted and I just continually get the above message. I've done all I know to do, and I'm on my 4th 'restore', all the way back to June 14th. I really need this resolved, as my livelihood depends, in part on uploading pix I take in the field.
I'm using a 2.3Gh dual-core PC w/ 4 Gs of RAM on a totally updated WIndows XP operating system using Mozilla Firefox.
PLEASE, if there's a fix readily available, or if you can help me find one, I would be most seriously grateful.
Thank you!!!Does this software run in Firefox, or is it a stand-alone program?
Assuming it is a stand-alone program:
If you need to stick with an older version of Java until that software is updated, you can disable Java in your web browers to protect against its vulnerabilities. Naturally this will disable some website features (for example, this uploader on sites that use it). To disable Java in all browsers, you can use the Java control panel, security tab and uncheck the box to use Java in browsers.
(I don't know whether that takes effect immediately or after exiting and restarting the browsers.) -
Imovie crashes when i try to view the video full screen or export it. How do i fix this?
iMovie crashes when i try to view the project full screen and export it. How do i fix this?
Close out of the camera app, double tap the home button and completely close out of the app.
Then do a reset, no data loss. Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
Then check your camera roll again. -
I imported videos from photo into iMovie when I set up iMovie (obvious mistake) and now iMovie doesn't work properly, nor can I move specific videos into a folder where I want them. How do I fix this? I even tried deleting iMovie, bought a new copy and installed it, but the folder "iPhoto Videos" is still there and I can't get new clips loaded to iMovie, especially where I want them. Please help.
The iPhoto Videos do occasionally have problems. I've seen a lot of people write messages to this Discussion group describing similar problems. The only thing that seems to get around this problem is to pull the video clips out of iPhoto then import them directly into iMovie. Once the troubles with iPhoto Videos starts, I haven't yet seen anyone write back with something that they did to fix it.
The most difficult part of doing this is the movies in iPhoto might be a little difficult to track down. But you can create a smart alum that does that for you. Go to iPhoto > File Menu > New Smart Album:
Set the first pulldown menu to keyword, second to contains, then in the last box type Movie with a capital 'M'. Then click OK. This smart album more or less does as search of the whole iPhoto Library and only displays items that match your search tearm of "Movie" exactly. In that smart album then you can find the original Movies you want to move out of iPhoto and into iMovie, <CTRL> click on the Movie clip, then choose Reveal in Finder. That will jump you out of iPhoto temporarily and into the iPhoto Library folder. From there you can move that movie file to the desktop. Move all the clips you want, once they're all collected up go to iMovie and go to the File Menu > Import Files. Then point it to the desktop where you moved your video clips.
This will put all those videos into an Event folder in iMovie and bypass iPhoto Videos altogether. -
In my system preferences, my sharing folder will not let me access it. All my photo booth share button is grayed out. One more thing, My photoshop will not let me import any photographs. I believe this all has to do with this. Any way to fix this issue?
The iTunes Store has no phone support and never has. Contacting them has always been via web form. Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards. -
Record video no sound!
<Edited by Host>I used my iPad video for the first time and had the same problem. After reading the replies, I went to Settings>Privacy>Microphone, and there is nothing there!
Then I went to the Video app and swiped up to get to the Control Center. I saw that the Volume setting was turned very low. I set it as high as it would go and did a test video. It worked! But there still is nothing in Settings>Privacy>Microphone.
That doesn't work for Siri, though. And probably Facetime doesn't work. I can't try calling anyone now, it's too late.
I'm not a techie, so I don't always understand the comments about how to fix things.
Maybe you are looking for
-
I am trying to pay my bill online. However, when I click the "submit" key, it tells me my "nickname" is incorrect. What the heck is a nickname? I have never had this trouble before.
-
Error while sending the file to GXS
Hello, I need to send the file to a bank which is using a GXS server. GXS uses a VAN networ and it is expecting a specific command to place the file on it's server. The put command is - boldput localfilename %localfilename%SECUPGPENA%GPEXRIP%%B
-
Bluetooth adapter with digital input
I'm interested to purchase a bose solo tv speaker together with a bluetooth adapter so that i can play music from my laptop using the bose speakers. Do you have any bluetooth adapters that I can plug into the digital input of the bose speakers instea
-
LabVIEW exits while editing block diagram unexpectantly
Hi all, while editing block diagram in LabVIEW 2010, I have experience some strange behaviour from the software. I have two monitors, one has the front panel of main VI and the other - block digram of the specifed VI. When I switch from block diagram
-
class QueryAction extends AbstractAction // Constructor QueryAction(String name) super(name); String iconFileName = "Images/" + name + ".gif"; if(new File(iconFileName).exists()) putValue(SMALL_ICON, new ImageIcon(iconFileName)); public void aFunc(){