As Integrate SAP PS and c_Project
Hi every body
We are an organization that finance projects in Different countries, they do the implementation them selves. What we do is monitoring them and disburse the money based on each contract they issue for each equipement , so for us we need to keep information about these contracts and the disbursement. Most the activites which we need from contacting and sharing information and direct requests, contracts information can be done using c_Projects and c_Folders , but the actual contracts componants and disbursements needs PS as we think(using full PS system is too much for us), my question is what is the best practice and how can we integrate PS and c_projects for our case.
Thanks
Jamal
Hi Jamal,
You have raised this in wrong component.You can raise this issue in
ERP Financials or SAP PLM(product lifecycle management) system.
regards,nishant
please reward points if this helps.
Similar Messages
-
How to integrate sap bw and sap pi system
Hi all,
I am doing interface to integrate SAP BW and SAP PI syetms .here i want to send data from SAP BW infocube to pi after that i need to send the data sap apo system.sap bw and sap pi intergration part is pending so how integrate these two systems and how to send data from infocube i am not clear abt process.i came to know tht do with proxy.but process i dont know clearly.
Can anyone tell me the process to integration process and any outbound sap bw to pi scenario blogs are information is very helpful.
Thanks
SG>> Can anyone tell me the process to integration process and any outbound sap bw to pi scenario blogs are information is very helpful
Basically you need to use client proxy.
A) Create data type , mesg typ, service inteface, message mapping and interface mapping as usual in ESR
B) In Integration Directory, YOu dont need sender communication channel and sender agreement. Because you are using client proxy. rest are all same
C) You need to do proxy configuration between SAP BW and PI to establish connection
Note: PI to sap apo system communication is already known. Then in PI target message follow that system structure in ESB and use the supported adapter for that system in Integration Directory.
Hope this helps -
Adapters to Integrate SAP XI and Siebel system
Hi,
Can anyone guide as to which Adapters would be useful to integrate SAP XI and Siebel system.Can we use SAP standard adpaters if so which one ..please let me know ?
Thanks.Hi ,
The new Siebel versions includes CORBA and MQ APIs .you could use the JMS Adapter from XI ( which is for free ) and connect to MQ to that.
and as such there are no Siebel adapters for Xi apart from using them from iWay which i agree with Frank.
Have a great day!
Venkat -
Adapters to integrate SAP XI and Siebel.
Anyone who would provide detailed info as to which adapters would integrate SAP XI and Siebel systems
iWay provides an Adapter to integrate XI with Siebel. Check this link on the service marketplace for more information on available 3rd Party Adapters for XI:
https://websmp104.sap-ag.de/~sapidb/011000358700008673832004E/index.htm
Best regards
Christine -
Integrate SAP Mobile and Web Dynpro
Hi,
I would like to know if there is some problem to access Web Dynpro of MI Client.
We have a process on our application that ask high performance and we are thinking to do this process with Web Dynpro.
The application is used on Windows Mobile 5.0.
Thanks and Regards,
BrunoHi Bruno,
Go through the link attached, It will help you with prequistes for renderdering Webdynpro Pages on PDA and other Mobile devices.
http://help.sap.com/saphelp_nw04/helpdata/en/7d/28fa3e7cb1d861e10000000a114084/content.htm
Cheers,
Mohan. -
Integrate Sap XI and Microsoft technologies
hi
i waana integrate, Microsoft Navision also called as
Microsoft Nynamics Nav,which is an erp used for small
scale companies, with XI .
Any Ideas.Hi
check the below link for reference
download.microsoft.com/download/9/4/9/949C821A-FE2F-4A7D-A528-5FE485AF1FF3/nav_tech_wp_netweaver.doc
reward points if found helpfull
regards
chandra.k -
Hi Experts,
Please provide me some links to integrate SAP TEM and Performance Management with MSS. Whether these views are available in the standard business package?, If yes, olease tell which iView should I use.
Regards / GuruNot sure if this helps, but you can have a looking @ the BP for Talent Development Specialist
http://help.sap.com/erp2005_ehp_03/helpdata/EN/44/0d232d250d5cfbe10000000a155369/frameset.htm
Thanks,
GLM -
Basic steps to integrate SAP PM with GIS and SCADA
Dear Team,
Can somebody tell me how we can integrate SAP PM with GIS and SCADA
I want to know whether in any industry this kind of integration has been initiated or not.
Regards,
Amar JadhavHi,
There are some interface options for GIS, not sure about SCADA.
Check under SAP for utilities:
http://www.sap.com/industries/utilities/index.epx
You should also ask in the IS-Utilities forum:
SAP for Utilities
-Paul -
Integrate SAP postal code in PA30 and ESS scenario
Hai Experts,
does anyone have a manual how to integrate SAP postal code in PA30 and ESS scenario.
SAP does have postal code tables which by customizing can be integrated in SAP HCM.
I need to know which customizing i need to do to activate the postal functionality en the progam to read and updat the SAP tables with the postal codes and address data delivered by out national post host!
Grtz en thanks in advance
RIchardThis solution is for NL country localization:
Activate NLADR feature with X; "For infotype Address Data (0006) this will result in the system checking the postal code for a given address."
The rest of what you need is in MP00064N include logic subroutines verify_address_nl.
*& Form verify_address_nl
Verification of address data in infotype 6 against the address
data in Central Address Management.
-->P_STRAS Streetname
-->P_HSNMR Housenumber
-->P_PSTLZ Postal code
-->P_ORT01 City
-->P_LAND1 Country
FORM verify_address_nl USING p_stras
p_hsnmr
p_pstlz
p_ort01
p_land1.
Hope it helps,
Regards,
Antoine -
Procedure to Integrate SAP PI 7.1 with Teradata and IBM Data stage
Hi,
We are integrating SAP PI 7.1 with Teradata and IBM Data stage for retail customer.
Please provide the following information.
1. What are the connectors available in Teradata and IBM Data stage
2. What type of output/input, Teradata can give/take from/to SAP PI
3. What type of output/input, IBM Data stage can give/take from/to SAP PI
4. How to handle Bulk uploads between SAP PI and Terdata, SAP PI and IBM Data stage
Thanks,
RameshHi Ramesh,
Could you get answers for your queries. We have Teradata 13.10.2 in our landscape and I have exactly same queries that you asked. Can you possibly share your experience in this area.
Anand. -
SAP PI and Ariba integration (Master Data)
Hi All,
I have to integrate SAP with Ariba for master data interfaces.
We have certain transaction data scenarios where we are using webservice communication with Ariba, but for master data interfaces what should be the approach?
How we can use Ariba tool kit?
How we do batch processing with Ariba Tool kit.
Please advice.
Thanks
ShiviHi Shivanjali,
did you get chance to look at below liinks
http://scn.sap.com/community/pi-and-soa-middleware/blog/2013/05/24/configuration-of-ariba-network-adapter-with-client-certificate-in-netweaver-pi
http://scn.sap.com/docs/DOC-43653
http://scn.sap.com/community/high-tech/blog/2013/06/26/rapid-integration-with-the-ariba-network
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d060ac35-a269-3110-34b7-c7d3a1f54175?QuickLink=index&overridelayout=true&59064390272846
Regards,
Naveen -
Questions on SAP BI and SharePoint integration
Hi all,
I was looking into how we can integrate SAP BI with our SharePoint server.
Does anyone has got exposure to this type of integration?Is there anyway that we can achieve this integration using SAP Business Objects or Performance Points?
Please advise.
Thanks
KukkuHi all,
We would like to get some thoughts on SharePoint integration with SAP BI.Could you please help us in solving the following questions:
1. Which one is better? SharePoint integration through PerformancePoint Server 2007 or SAP Business Objects(SAP BO XI integration kit)?
2. What are the starting point(system requirements) to develop a prototype on both the methods?
I was able to find some info on both PPS and SAP Business Objects from the above link and also from sdn documents(those were really helpful,thanks!) but none of them provide some detailed insight into which one to opt for or how you can goahead.If someone has got more info on this please let us know.
Thanks
Kukku -
How to Integrate SAP Business One to R/3
Hi guys,
I have one client, this client is having the one head office and two branch offices. in the Head Office SAP R/3 is implemented
Now the Client wants to implement SAP Business One in the branches. and want to integrate SAP Business One to R/3.
i.e; if in the branch office creates Purchase Order then Automatically should create the Sales Order in SAP R/3.
This is the one Scenario. their are lot of scenario's.
Thanks in advance.Shiva,
Apologies as I am not sure what the question is. If your question is can you integrate SAP Business One with R/3 ... then yes using the SAP Business One Integration for SAP NetWeaver or B1i. You can find more detailed information on B1i on SDN here ...
SAP Business One Integration for SAP NetWeaver (B1iSN) [original link is broken]
HTH,
Eddy -
RFC calls with SAP JCO and IBM resource adapter for SAP - basic tuning
Hi experts,
we are working on a java portal connected to a backend system SAP by calling RFCs.
On our first integration tests, it appears to be quite slow fetching data from SAP by calling the remote functions from the custom portal. We are using SAP JCo 3.0.6 and IBM resource adapter for SAP 7.0.0.3 to integrate SAP with our portal.
Is there any basic tuning to achieve to improve performances or any hint of where to tune in SAP ?
Any help would be greatly appreciated.
Thanks a lot,
JamalHi Jamal,
I understand you have already checked performance issues in the SAP Server. We had some problems with certain RFC calls and it turned out to be a badly developed ABAP sentence.
I'd recommend you to use httpwatch or another tool to check the response times from the browser, so you can point accurately where the is.
Regards
Francisco -
Integrate SAP ERecruiting Newhire/Rehire with SAP HCM Process
How to integrate SAP ERecruiting Newhire and Rehire with SAP HCM Process and forms using SAP NetWeaver PI 7.3 , Could any one give me steps or docs..
I think standard content available in market place if no then try with Web service (sender side) and Proxy in receiver side,
Maybe you are looking for
-
Scanning multiple pages into one document
I have an HP8600 running off a MacBook Pro - I used to be able to scan multiple pages (both from the auto feed and manually) save them as one document. Lately though it is saving them each as its own document. This is happening with both MacBooks
-
Uploading data from legacy system to sap system
Hi, Uploaded 10 datas in Direct Input mtdit is successful; while the same no. of records are uploaded using call transaction, then it failswhat is the reason for it? points will be awarded.
-
Hi Can anyone tell me where/how to add my own layouts so they are available in the New File dialogue? I'm on CS3 by the way. I'm sure I managed this way back in MX but just can't remember how. Many thanks Jon
-
Vendor blocking for specfic materilas
Hi, Can someone explain me how to block a vendor from purchasing certain materials. MRP should also take this into account.
-
Error in loading 0PAPA_C02 cube
Hi experts, I`ve activated the 0PAPA_C02 cube from business content in order the steps SAP note 336229. It works fine till master data upload 0EMPLOYEE and 0PERSON. The problem is when I try to upload to 0PAPA_C02 cube from 0EMPLOYEE and 0PERSON mas