AS IS TOBE

dear all
what is  AS IS TOBE,
WHAT U HAVE TO CREATE CUSTOMAIZATION & END USERS  DOCUMENTS IN IMPLEMENTATION,
WHAT IS USER ACCEPTANCE AND SECURITY TESTINGS,
plz kindly explain above queries
regards,
sunny

Hi Sunny!
In ASAP(Accelarated SAP) Methadology there are five phases involved in implementing SAP for a Client.
5 Phases:
Project Preparation
(ii) Business Blue Print
(iii) Realization
(iv) Final Preparation
(v) Go-Live and Post Go-Live Support
In which, the AS-IS and To-BE study plays the part in the "Business Blue Print"(second Phase) Phase.
Before implementing SAP, client might have worked in a way of approach/processes dealts with in necessity to meet their Business objective.
The existing Business processes needs to be clearly studied, examined and also to be recorded to the lowest minimum - which is a AS-IS study. In other words, it is termed as CSBP(Current State Business Process)
Once the existing Business process is studied, the process needs to be mapped with SAP best practices to help the client in achieving/ exceeding their expectation in Target. This mapping scenario how the business process adopted into SAP ERP is TO-BE Process. IT is also termed as FSBP(Future State Business Process)
In REALIZATION phase-(Third Phase), the Configuration(or Customization) of Client's business process in SAP development server needs to be done.
Once this Configuration is done, the necessary testing will happen based on the scope of the project, for eg,Development server ->Quality Server->Pre-Production Server -- Sequence of testing after transporting to the required clients/Servers.
Once the same is accompolished, we need to prepare the Testcases(Business process Sequence  check list) and the User acceptance Tesing needs to be done by the client with Consultant support.
The EndUser Doc's is simply a custommized manual for the client business process to work in SAP Easy Access Screen to execute their Day-to Day Business Transactions/Processes in SAP-ERP.
Hope the above explanation will give some inputs on your queries. Please let me know for any clarifications
Njoy SAP
-Saravanan
Edited by: Saravanaganesh Chandrasekaran on Dec 24, 2008 6:25 AM

Similar Messages

  • PO pending for Approval   -   tobe sent as mail for Approver (intimation)

    Hi ,
    PO tobe relased tobe sent(Intimated )  as mail for Approver
    what are the options for configuring this .
    With Rgds,
    Krishna.
    Edited by: Krishna L on May 27, 2011 3:28 PM

    Hi Krishna,
    Standard SAP comes with the workflow WS20000075 for release of purch. documents. You have to activate its linkage to the event PurchaseOrder.releaseStepCreated. This is done in trs SWETYPV - locate the entry BO BUS2012 RELEASESTEPCREATED or create one if it doesn't exist. Then make sure the receiver type is WS20000075 and the column "type event linkage" is checked.
    In customising for MM > PO > Release > Release proc. > Workflow define the recipients of the WF for each release code. If you assign the WF to an organisational unit rather than to a user, you will have to allocate users to this org. unit in trs PPOME.
    Good luck!
    Raf
    PS. For more details, check this link in the [system documentation|http://help.sap.com/erp2005_ehp_02/helpdata/en/04/92775546f311d189470000e829fbbd/frameset.htm].
    Edited by: Rafael Zaragatzky on May 29, 2011 6:24 PM

  • Problem with Powerbuilder MAPI / Mozilla Thunderbird / Tobit David

    Hello,
    since PB 12.6 (Build 4035) we have problems using the "mailsession" object with programs like "Mozilla Thunderbird" or "Tobit David".
    Although e.g. Mozilla is the default email client on the users computer, the mailsession object always tries to send mails using Outlook.
    With PB 12.5 it worked as it should.
    I read that you changed the mailsession object to "extended mapi". Do we have to rewrite our code to send mails with Mozilla again?
    We send mails like that:
    mailSession     mSes
    mailMessage     mMsg
    mSes = CREATE mailSession
    mSes.mailLogon()
    mMsg.Subject          = "Subject"
    mMsg.NoteText         = "Body"
    mMsg.Recipient[1].Name               = "Test"
    mMsg.Recipient[1].Address           = "[email protected]"
    mMsg.Recipient[1].RecipientType  = MailTo!
    mMsg.AttachmentFile[1].Pathname    = "c:\print\invoice.pdf"
    mMsg.AttachmentFile[1].FileType    = mailAttach!
    mMsg.AttachmentFile[1].Position    = 1
    mRet = mSes.mailSend(mMsg)
    mSes.mailLogoff()
    Regards
    Stefan

    Hi Stefan,
    Engineering did get back to me and they will implement a fix to check whether the default client supports Extended MAPI and if not, use SImple MAPI.   I've opened CR 781930 to add this check into the MAPI implementation.
    As these are not email clients we use, could you please export the registry entries for these mail clients from this registry key below.
    HKEY_LOCAL_MACHINE\SOFTWARE\Clients\Mail
    Please rename the .reg files to .txt and attach them here.
    Thanks,
    Pat

  • HT204382 i need to learn in how to down load music from u tobe.but i need to learn on how to star from the bottom.

    I need to leran in how to dawn load music from you tobe.but I need to start from the bottom can someone help?

    If there is no download button under the video you are looking at, then Youtube's terms forbid downloading someone else's property. Because they forbid it, we would be violating the terms of these forums if we were to try to help - sorry.

  • Distributing Reports from BOEXI via Tobit Faxware Fax Server

    Has anyone any experience with sending reports by fax server, in particular Tobit Faxware from Tobit Software AG?
    I have recently joined a company using this and, before I made changes to a report in CRXI and saved it back to BOEXI R1, this application was working fairly well, and now not at all.  The application relies on control codes preceded by @@ symbols, which are interpreted by Tobit and stripped out before pages are sent out by fax.  The application is being used for the distribution of Statements and Arrears Letters, which are crucial to the business.  These were originally created with CR9 and CR10 and distributed with CE10.  I'm wondering if there are any differences in how report pages are rendered by the different versions.
    I am interested to hear from anyone with similar experiences.
    RobPimlott
    [email protected]

    Hello,
    Thanks for confirming.
    I believe the reason is CR Designer is built in and uses C++ code and the DEVMODEW to do the printing. .NET uses the Framework which is limited on what it maps over from the Printers DEVMODE to the Framework devmode ( what ever it uses - I have not dug into it just heard from Developers on other limitations we've run into) and doesn't work the same ways a DEVMODE.
    I doubt we'll ever be able to make it work as it does in the Designer, CR generates an EPF ( Proprietary file format ) and sends that to the printer as a "picture"
    Possible work around... Try exporting it to Word ( Editable ) Because I believe we do better at what you see in the designer is what you get in the export. Your fax program may be able to get those control codes.
    PDF may be another option....
    You'll have to add code to print the Word Doc but that should not be too much work...
    Thanks
    Don

  • New Depreciation Area tobe added to the existing Assets

    Hi,
    I had Run OAYZ to activate a depreciation area for a Asset Class
    I run AFBN to add this new depreciation area to the existing assets.
    When I go to Assets Explorer (AW01N) I get following area
    Values for Ordinary deprec. have changed in dep. area 13 in fiscal year 2007
        Message no. AU390
    Diagnosis
        Depreciation terms were changed in depreciation area 13 since the last
        time depreciation was recalculated. The values for Ordinary deprec. that
        were saved in the database in fiscal year 2007 are therefore different
        from the newly calculated values by an amount of
        476.41-.
    Procedure
        Check if the newly calculated values are correct. If they are, then
        carry out a depreciation recalculation. You should be aware that if you
        recalculate depreciation, new values could arise for all open fiscal
        years, and these would then have to be posted to the general ledger by
    means of a depreciation posting run.
    If, on the other hand, you want to keep the values that are saved in the
    database, you have to set the depreciation terms back to how they were
    at the time of the last depreciation recalculation.
    To see a comparison of the old and new values, you can use the Display
    dep. calc. function in the asset value display or the Recalculate values
    function in the Asset Accounting menu.
    Proceed
    Now if I try to click on proceed and recalculate the depreciation (AFAR) the system gives error
    40001        0    WRK SURF FOR RDQ WRKPROJCT RMS-RSCH DATA OP.   2007 Error
    in dep. calculation
        Message no. BL001
    Pl. guide me for the same.
    REgards,
    Sanjay Soni
    [email protected]

    Hi Sanjay,
    Execute T Code AFBN and add the new depreciation areas to the existing assets. This will add the new dep area to all the assets under the particular char of depreciation.
    regards
    Sridhar

  • Vendor tobe searched on the base of Vendor Account Group

    Hi,
    I want to search a vendor on the base of their account group of that vendor
    Eg. While creating a PO in ME21N for vendor field in F4 option , i want to get the vendor account Group also to simplify my search.
    is it possible thru search help customizing or else whether ABAPer help is required.
    With Rgds,
    Krishna.

    Hi Krishna,
    Go to ME21N--Click on Vendor and press F4.
    Select the Tab for " Vendors". Here you can see the field as "Account group".
    NOw here you can refine your vendor search based on  account group.
    Rgds
    Utsav

  • Tax tobe calculted on payments

    hi sap gurus i need ur help regarding taxation
    as our client needs the taxes to be calculated on payments insted of invoice.
    i tried it by selecting the tax code option and selecting the calaculate tax but is giving the  same amt with calculating the taxes. can u guys help me in this issue . as this is a matter of urgency.
    thanks in advance

    Hi,
    Please specify the tax u r talking abt wheter sales tax, custom or wht.
    Warm Regards

  • I am trying to set up my e mail account on my i pad and do not seem tobe getting my e mails I have checked the wifi and it is connected? what can I do?

    I am trying to set up my mail account on my i pad.  I have checked the wi-fi connection and all seems ok but I still do not have my emails yet I followed the on screen info required?  please help?

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
     Cheers, Tom

  • Airport extreme locks up then needs tobe restarted.

    My Airport extreme locks up and then has to be powered down and restarted before it will work again.

    Just a few more details might help forum members identify or understand your issue better....
    Are your computers / devcies all connected using Ethernet?
    All connected using wireless?
    Or, are some connecting using Ethernet and others wireless?
    Does the AirPort Extreme work OK for awhile, then lock up, or does it lock up immediately when you power back up?
    Was the Extreme working OK in the past and now is having problems, or is this a new device that you are trying to configure?
    What type of modem are you using to connect to the AirPort Extreme?

  • [SOLVED]Why does .bash_profile seem tobe read in non-login shells too?

    ~/.bash_profile:
    . $HOME/.bashrc
    ~/.bashrc:
    export PATH=$PATH:$HOME/code/shell
    (irrelevant lines left out)
    (I have no ~/.profile, ~/.bash_login or * ~/.bash_logout. I have also never edited /etc/profile or /etc/bash.bashrc.)
    I've read that in a login shell (e.g. TTY1) only the former is read, which in my case sources the latter. Running "export -p" in TTY1 gives a result consistent with this:
    declare -x PATH="/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/usr/bin/core_perl:/home/lazar/code/shell" (/home/lazar/code/shell is only listed once)
    I've also read that in a non-login shell (e.g. xterm) only the latter is read. However, when I run "export -p" in xterm or urxvt I get an unexpected result:
    declare -x PATH="/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/usr/bin/core_perl:/home/lazar/code/shell:/home/lazar/code/shell" (/home/lazar/code/shell is listed twice!)
    This implies that ~.bashrc is read twice, perhaps because .bash_profile is read in non-login shells too, even though it shouldn't be, should it? It doesn't seem to matter really, but I can't help but wonder why...
    [EDIT]
    I've found the answer. Exports from .bash_profile are done at boot time and *remain* active while X is active. Opening a non-login shell will cause .bashrc to export as well. Hence the duplication. My solution:
    ~/.bash_profile:
    export PATH=$PATH:$HOME/code/shell
    . $HOME/.bashrc
    ~/.bashrc:
    (lines other than export commands)
    Last edited by Lazar (2011-02-14 07:57:56)

    As I wondered, I think it's a problem with passwd. I don't have a dbus entry and must have missed it when I was copying things around between my version and the .pacnew. Downloading an install disc now since I can't seem to change it from the recovery console due to mounting root read-only.
    I'd love to know of a way to boot that avoids starting dbus and other things that might break while still having read/write access to root. Will mark solved once I update /etc/passwd and reboot.

  • Sub Contracting Components field tobe restricted

    Hi all,
    In sub contracting
    I want to restrict the users from changing the components consumed for the Finished Components at the time of MIGO - Goods receipt for FG
    any error customizing or authorization object to restrict.
    With Rgds,
    Vamsi

    This can be done through development. When subcontracting PO is created a reservation also gets created. So from EKPO you will pick the reservation number and go to reservation table and find out the list of components and quantity.you need to use enhancement spot MIGO-LMIGOKG1-(line 888) to write your code.
    You will have to put a check  the subcomponents or qty is not allowed to change. If so give a error message. This development is a little complicated but can be done as we had put a similar check with client i was working for,
    Regards

  • Using characteristic both in fields tobe changed and condition.

    Hi All,
    In my fox formula, I have defined for example Fiscal year/period as the 'field to be changed' and defined in the FOX formula code.
    But I also need to use it as a variable in the 'condition' of Planning function for that FOX formula.
    Is it possible, and if so, how can I have a characteristic in both my 'Condition' and 'field to be changed' in my planning function for the FOX formula.
    Thanks everyone.

    Hi,
    I already have a User-Specific variable for Fiscal year/period that I would like to use in the FOX code to form the basis of my data selection condition.
    My FOX code looks like this:
    DATA FRVERSION TYPE 0VERSION.
    DATA TOVERSION TYPE 0VERSION.
    DATA FRVTYP TYPE 0VTYPE.
    DATA TOVTYP TYPE 0VTYPE.
    DATA QTR TYPE 0CALQUARTER.
    DATA ENTRIES TYPE I.
    DATA COUNT TYPE I.
    DATA AMOUNT_EXISTS TYPE I.
    DATA RESULTS TYPE KEYFIGURE_NAME.
    FRVERSION = VARV ( ZBPSUS01 ).
    TOVERSION = VARV ( ZBPSUS02 ).
    FRVTYP = VARV ( ZBPSUS03 ).
    TOVTYP = VARV ( ZBPSUS04 ).
    FOREACH RESULTS.
      AMOUNT_EXISTS = 0.
        FOREACH QTR.
          IF {RESULTS,QTR,TOVERSION,TOVTYP} <> 0.
        AMOUNT_EXISTS = 1.
        EXIT.
          ENDIF.
        ENDFOR.
      IF AMOUNT_EXISTS <> 1.
        FOREACH QTR.
         {RESULTS,QTR,TOVERSION,TOVTYP} =
    {RESULTS,QTR,FRVERSION,FRVTYP}.
        ENDFOR.
      ENDIF.
    How can I incorporate the Fiscal year/period condition in here.
    In my Fiscal year/period variable I have defined the single values of 001/2006, 002/2006,003/2006.
    So I want the funnction to only read the data in these periods and use them as the basis of the copy. I do NOT want it to copy over any other periods.
    Or do I need to use the 'Do' statement to make it loop over the variables?
    Or will the 'Foreach' statement be fine?
    Thanks

  • MIRO number range tobe  separated at company code level

    Hi All,
    Can anybody tell me how to separate MIRO number range at Company code level. We have 3 company codes in the same client. Cant we have different company codes for 3 of them. If yes, where to do the required

    Hi
    Refer the below post
    Different No Range for invoice document no(MIRO) - company code wise.
    Thanks !
    E.Avudaiappan

  • COOIS - new field  tobe added in selection screen

    My requirement is ' batch field shud be added in COOIS Selection screen & output shud come for given batch '.
    can anyone give the details .

    Hi,
    You have to customize the Program according to business requirement.
    You can copy as ZCOOIS and assign a Tcode for that and do the necessary modifications as per need.
    Regards
    Arbind

Maybe you are looking for