As of 2015: Best SSD for 9,2 Macbook Pro (mid-2012 non Retina)

Hi All, this is my first post in the community, so I apologize ahead of time if it is evident in my query.
I currently purchased a Mid-2012 Macbook Pro Non Retina. Model ID: MacBookPro9,2.(i7, 2.9 GHz)
My question is: as of today (April 2015) what is the best SSD available (around 500GB in size) for my specific laptop? I've searched quite a few communities and just around Google and have found numerous options that people swear by and the same options that people swear against. What's been difficult is a lot of the posts were created much earlier on (which is expected for a MBP from 2012). I have read good (and bad) things about Samsung 840, 850 pro, 850 evo; as well as hearing good things about Crucial's M4, Mx100, Mx200. My preference is to spend approximately $200 for a 500GB unless there is clear evidence that I need to splurge on an OWC Mercury Extreme Pro because the Samsung/Crucial drives will just cause me trouble.
If anyone can lead me to the SSD's that Apple themselves use, I would be much appreciative. As of now, I'm not even sure which Controller they utilize (Marvell?) and if they support TRIM. Any information to shed some light on this would be great as a lot of my knowledge has purely been from the articles I've been reading in the past few days.
I know this question has been asked over and over again; but again, I am asking it to try and find the best SSD as of late.
Thanks ahead of time!

"I thought the non Retina MBPs were still connected via a SATA connection. "
That is correct and that is why I was recommending that people buy that 2012 MBP non Retina that Apple was selling until just recently. Having the SATA connection while slower than PCIe allowed you more flexibility in purchasing upgraded drives.
"I currently purchased a Mid-2012 Macbook Pro Non Retina"
So you bought one of these? Be aware that if you modify the laptop in any way your warranty will be void unless the work is done by an Apple approved tech if Apple becomes aware of it.
That said you could put a 480 SSD from OWC:
http://eshop.macsales.com/shop/SSD/OWC/Mercury_6G/
That can be had for $229 currently.
I'd be wary of installing a Samsung in there because of problems like this:
Samsung 850 EVO in Early '11 MBP
A lot of people are running that drive just fine but now and then....
I've installed 6 OWC SSDs in various Macs and have had 0 problems and 0 hassles formatting and installing them.

Similar Messages

Macbook Pro Mid 2012 Non Retina. SSD/HARDRIVE

Processor 2.3 GHz Intel Core i7
Memory 4 GB 1600 MHz DDR3
Graphics Intel HD Graphics 4000 384 MB/
NVIDIA GeForce GT 650M
500gb sata disk
My question is that i was thinking about upgrading my my hadrive to an ssd, im not sure how to go about it, also my my memory to 16gb. any suggestions on what hardware i can use in my computer?

Go to the OWC website. Any of these SATA drives will be compatible with your MBP. Other options can be found with other vendors, but this is a good place to start;;
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Ciao.
16 GB RAM is the maximum that your MBP will accept.
Message was edited by: OGELTHORPE

MacBook Pro (summer 2012) non-retina display and SSD upgrade?

Looking to upgrade to a SSD in my MacBook Pro (summer 2012) non-retina display. Are there ones that work better in a MacBook Pro?

In theory at least, any SSD will work fine. There are some additional considerations to make, however. It mostly revolves around updating the drive's firmware. Many SSD companies do not offer Mac-friendly ways to perform this procedure. From the list Clinton provided, you can drop Corsair and Samsung immediately for this reason.
I would not consider OWC, Intel, or any SSD that uses a Sandforce chipset because of spotty reliability. Yes, improvements have been made, but I still do not trust them. Of the dozens of SSDs I've owned and deployed over the last 2-3 years, the only ones to need replacement were ones with Sandforce.
That leaves Crucial, Plextor, and OCZ. The former two basically use the same Marvell chipset. While I can't speak for Plextor, Crucial's firmware updates are OS agnostic. You simply down an .iso file, burn it to CD, boot from that disc, and perform the update. It works perfectly on a Mac. Doing a quick check of Plextor's support site, it seems the proedure is the same.
For OCZ, I'm only focusing on the Vector and Vertex 4. The former is brand new, having just hit the market within the last couple weeks. If you're looking to buy right now, I would stick with the Vertex 4 as it's a more proven commodity. OCZ has created a suite of tools that you copy to a USB flash drive. You can boot from it, and it takes you to what I think is a very heavily modified Linux distribution. From there, you can do a firmware update, check drive health, and perform a SATA secure erase to return the drive to its "out of the box" state. To get the most from the tools, you should have a USB mouse plugged in. Also, firmware updates require the use of a hard-wired Ethernet cable; you can't use wireless.
Bottom line - for an SSD upgrade, stick with Crucial, Plextor, or OCZ as they are the most Mac-friendly (aside from original Apple parts, of course).

Adata sp900 sdd 128-GB ssd, optibay optical drive to replace superdrive, and 16 GB upgrade for macbook pro mid 2012.

Hello everyone,
Thank you in advanced for all of the support. This is my first post to the communities. I just bought a 2.9 GHz core 17 processor MacBook pro mid 2012 13" with 8 GB of RAM and I am in the process of upgrading it. When I bought the MacBook pro originally, I was told that I would never mac out the performance because I do not do a lot of photo/video editing. This is true, but I am an academic researcher and tend to multitask often, having 20+ safari tabs open, SPSS (a statistical program), full screen mail app, full screen calendar app, and preview, iTunes open all at the same time. I often get slow performance and error messages that state low memory. This is why I am interested in upgrading the laptop. I am getting ready to go to medical school and I want to have a powerful laptop. I also want to future proof because I plan on having a dual boot system to mac OS and windows OS.
Because I know I will be maxing out the performance of the computer, I want to take full advantage of upgrades, especially now because the cost of the components is reasonable at the moment. The following are the proposed upgrades:
1. Upgrade my current 8-GB ram (2x4-GB) with 16-GB ram (2x8-GB). I plan on using crucial RAM.
Crucial 16-GB Ram: http://www.amazon.com/dp/B008LTBJFW/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&coli d=2B1KHELSPJPNN&coliid=IYGJWGQDH8LV0&psc=1
2. Replace my optical drive with a hard drive. I will place a SSD into my current hard drive position and then install my current HDD into the optical drive bay with the optibay optical drive caddy. I am doing this because I plan to use the SSD as the boot drive and my current HDD as my backup and files drive. I am putting the SDD into the HDD because I have read it is better to place it in this bay for performance. I will put the other HDD in the optical drive because the performance of that one will not be as important.
Adata SSD: http://www.amazon.com/dp/B008LTBJFW/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&coli d=2B1KHELSPJPNN&coliid=IYGJWGQDH8LV0&psc=1
Optibay Optical Drive Caddy: http://www.amazon.com/dp/B0058AH2US/ref=wl_it_dp_o_pd_nS_ttl?_encoding=UTF8&coli d=2B1KHELSPJPNN&coliid=I3GI8MGWAKXY79
My questions:
1. Is the listed RAM appropriate and sufficient for my MacBook pro?
2. Is the listed SSD appropriate and sufficient for my MacBook pro?
3. Is the listed Optical Drive Caddy appropriate and sufficient for my MacBook pro?
4. Is there still a firmware problem that does not allow for SATA 3 (6Gb/s) support in the optical drive?
5. Would it be easier to format the new SSD outside of the MacBook using a SATA to USB adapter?
6. Does working on any of the listed components void my AppleCare (I plan on keeping all of the original components so I can replace them, if I ever need to see apple support)?
7. What is the best way to put Mavericks onto the SSD to make this my boot drive?
8. What is the best way to make all of my files remain on the HDD, but link to the SSD with the operating system?
9. Has anyone ever successfully upgraded to 16-GB RAM and used their optical drive for a secondary hard drive?
10. Is there any miscellaneous advice for this project?
Please feel free to give partial answers. I know this was a lot of information, but I wanted to be efficient in my post. I am very appreciative of everyone who will contribute.
Thank you!

rmichaud91 wrote:
Hello everyone,
I just bought a 2.9 GHz core 17 processor MacBook pro mid 2012 13" with 8 GB of RAM
16 GB of RAM is the best you can do.
The optibay HD will null and void your warranty.

SSD Upgrade MacBook Pro Mid 2012 (Model: 9,2)

Hey guys!
Well as some of you might already have read, I will upgrade the RAM of my MacBook Pro, and since I decided to do this, I tought that why maybe not do the SSD as well. I want to know which is the best option for an High Quality SSD for my MacBook Pro Mid 2012 (Intel Core i5 2.5 MHz, 4GB RAM (upgrading to 16GB). I've read that Crucial, but I want an SSD with more than 512 GB which is the amount my Mac came with in the default HD.
Thanks!
Later.

OWC offers a 960GB SSD with top reliability and storage capacity:
http://eshop.macsales.com/shop/internal_storage/SSD/Mercury_Electra_3G_Solid_Sta te
For a little less, Crucial has a reliable SSD available:
http://www.amazon.com/Crucial-2-5-Inch-adapter-Internal-CT960M500SSD1/dp/B00BQ8R GL6/ref=sr_1_8?ie=UTF8&qid=1373169624&sr=8-8&keywords=crucial+SSD
Personally, I chose Crucial.

What are the specifications for Internal Hardisk 500GB Macbook Pro (Mid-2012)?

I need to purchase a new internal hard disk for my Macbook, I'm gonna go for 500GB space.
Now. I need to know the specifications. I don't want suggestions, because I live in India and I may not be able to purchase the harddisk which you tell me to.
1. http://www.flipkart.com/wd-scorpio-blue-500-gb-laptop-internal-hard-drive-wd5000 lpvt/p/itmdnymtym9nrpnd?pid=IHDDHVGZAFMXBZK2
2. http://www.flipkart.com/toshiba-500-gb-desktop-internal-hard-drive-dt01aca050/p/ itmdcvv2csptdmbs?pid=IHDDCVQGQYZGZ6XK&ref=18872ea3-7bd1-4582-8e9a-5d4f40a94531
Will any of the above two harddisk work with my 13 inch Macbook Pro (Mid 2012) model?

Drive #2 would be your best bet - except for the fact that it's a 3.5 inch drive and you need a 2.5" x 9.5mm drive.
Look on your site for HGST 7k1000 drives - 1TB and it will 'fit' your machine exceptionally well.
Clinton
Message was edited by: clintonfrombirmingham
Here's a good one.

How can connect my macbook pro mid 2012 to my imac 21.5 inch mid 2010 ?? I want to use imac like a display for macbook.

How can connect my macbook pro mid 2012 to my imac 21.5 inch mid 2010 ?? I want to use imac like a display for macbook.

Target Display Mode: Frequently Asked Questions (FAQ)
with a mini display to mini display cable. Attach it to the Thunderbolt port on your MBP and to the mini display port on your iMac.
How do I enable TDM?
Make sure both computers are turned on and awake.
Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.

HT3986 Where can i download the driver for my network card? i have a macbook pro mid 2012, and are using windows 7 ultimate

Where can i download the driver for my network card? i have a macbook pro mid 2012, and are using windows 7 ultimate

uhm hey guys,
idk where else to get help so ima try here,
i got windows 8 installed with bootcamp on my macbook pro late 2010 (5, 5) and theres no sound coming out of it, so i installed an nvidia audio driver (idk, it could be the incorrect one) but i have nvidia GeForce 320 on my macbook.
do you know what i should install ?
but when i go onto my osx the sound is fine, so i figured im missing something on windows 8
Orrrr could i just go out and get parallels and hope it doesn't get the same problems?

Macbook pro mid 2012 backing up from disk ulitiy asking for "login" keychain?

I bought a "WD My passport For Mac 1TB" portable external hard drive since I can't get into my macbook pro mid 2012 10.9 because when I turn it on its just grey screen with apple logo and spinning wheel. I went to future shop to the geek squad and they did diagnose of it that is wasn't the hard drive but the operating system with problem. Which makes sense since I did the apple hardware test, disk repair/verfy, permissions repair/verify and they all came back with saying my volume is ok etc.
SO my question is to back up my files etc. I do the command + r and go to disk ulitiy and click on "Macintosh HD" and then click "New Image" and then select "My Passport for Mac" to save on there. What I want to know should I put "compressed", "read/write", "read only" or "DVD/CD master" for Image Format? AND For encrytion, do i pick "128-bit AES encryption (recommended)" or "256-bit AES encryption (more secure, but slower)"?
Also I have one more option before I go to my genius appointment on saturday is to do the "erase and reinstall" option. Of course I need to back up my files to do that which is why I am asking the questions above. Can any one link me to the "erase and reinstall" option OR tell me your experience on how to do it OR how to do in overall? Also, is it an effective method? I already have the important files on my google drive, have my microsoft disk stuff on my USB, the only app I kind of don't want to lose is my "Notes" app. Also for the apps I downloaded in Apple store they should be still there even if I erase my hard drive?
So I did the command + r and go to disk ulitiy and click on "Macintosh HD" and then click "New Image" and then select "My Passport for Mac" to save on there. I put "read/write" for Image Format AND For encrytion, i pick "128-bit AES encryption (recommended)"
I put in a password when prompted but after that it says "Disk Ultitiy wants to use the "login" keychain." I put in my ususally login password that I use to get on to my desktop but that doesn't work. I have the option to press ok or cancel. Can I just press cancel and will it contiune on backing my files to my external hard drive?
I pressed cancel and the progress bar to saving my macintosh HD to MY external hard drive portable isn't shown any blue bar progress for 9 mins now...
do u know what to do?

If you like you can also restore, via Disk Utility, the DMG onto another disk, but you will be able to read the contents, simply mounting the volume inside any version of OS X.
^ What do you mean by this?
Also, It says on here:Mac OS X v10.5, v10.6: How to back up and restore your files - Apple Support
When the imaging process is complete, select the newly created disk image in the device pane. Then, choose Images > Scan Image for Restore... from the menu bar, and let the scan complete.
Quit Disk Utility (press Command-Q). Then press Command-Q to quit the Mac OS X installer; you will be prompted to restart.
Restoring the backup disk image's contents to your internal Mac OS X disk
What does Images > Scan Image for Restore mean?
Also If I erase hard drive and then reinstall mavericks OS X from "command + r mode" and after that hopefully I can get back in would I hook my external hard drive and then open the copy of the "macintosh".dmg and drag everything back on? or...?

About macbook pro mid 2012 ssd or sshd problem

hi i have macbook pro mid 2012 computer.
i have problem about sad upgrade. and i tried mac os mountain lion and yosemite x
i uninstall normal hdd and i bought new 3 different brand ssd.
Kingston SSd now 120 GB
Samsung Evo 840 250gb
Sandisk X210 256 Gb
when i open i making cmd r then i making internet recovery.
my normal harddisk is making internet recovery and speed is very clearly, everything is normal.
but when i installed one of them ssd drive, its working very slow than my normal hard drive.
however, iam working with external hard drive box with include my ssd drive, its working normal and i can boot and i can using, everything is normal again.
as a result, except my macbook old hard drive from sata port and when i used with external harddrive box with my ssd drives everything is ok.
but ssd drive not working properly in data port cable.

sorry not data, sata
and not sad, ssd

What is the best site for selling a MacBook Pro

What's the best site to sell a MacBook Pro?

eden79,
how would you define “best” in this context?

Samsung SSD 840EVO not booting from macbook pro mid 2012 after cloning

Hello there,
I guess i'm so stuck with the SSD that i have purchased.
Here is the details:
SSD - Samsung SSD 840 Evo 250GB
MacBook Pro - 13-inch, Mid 2012
Model Identifier: MacBookPro9,2
Processor 2.5 GHz Intel Core i5
Memory 16 GB 1600 MHz DDR3
Graphics Intel HD Graphics 4000 1024 MB
Software OS X 10.9.1 (13B42)
Boot ROM Version: MBP91.00D3.B08
SMC Version (system): 2.2f44
I was running with the factory HDD (toshiba 500gb) and thought of replacing it with an SSD . Tried a clean installation of mavericks at first using Bootable USB drive having mavericks. So i went on and installed the ssd replacing the HDD i had and went on to boot up from the USB, prior the installtion i tired to partition it first with single partition MAC os extended journaled with GUID table. But then it did partition but after that it says trying to reinitialize the drive and it never came back although i tried more than five times. So then i went back to my HDD and tired cloning it to SSD using Carbon Copy Cloner, but even for that i had to do the partitioning which failed. Finally i had to go and return back that peice and they gave me another one convincing me that it might a defective peice.
Now, with the second one, at first i booted up my HDD normally and connected the new SSD the USB/sata converter and i successfully partitioned and using carbon copy cloner, i have cloned as well. Now to make sure if its all ok, before replacing the HDD in the main compartment, i just selected the startup disk as the new SSD and restarted the system... it booted up fine like a cheetah... was all gud... i thought everything is pretty fine. Then ofcourse i went ahead and replaced the HDD and powered up the system again, but then it's not booting up... it gives you that folder with ? mark and that's all...
And then i tried some other ways too... i even checked the firmware versions and i guess they are upto date as well. I just dont get the reason why it's not working.
Please help me.
Anjillan

yea... i have tried all those...
can you confirm if this is ok to buy:
http://www.ebay.ca/itm/New-HDD-Hard-Drvie-Cable-for-13-MacBook-Pro-A1278-MD101-M D102-821-1480-A-2012-/181269577616?pt=LH_DefaultDomain_0&hash=item2a34823f90&_uh b=1
or
http://www.ebay.ca/itm/NEW-MacBook-Pro-Unibody-13-A1278-2012-md101-102-HDD-Hard- Drvie-Cable-821-1480-A-/121183868039?pt=LH_DefaultDomain_0&hash=item1c371f1487&_ uhb=1
or this one..??
http://www.ebay.ca/itm/for-APPLE-MacBook-Pro-13-A1278-HDD-Hard-Drvie-Cable-MD101 -MD102-821-1480-A-2012-/331060187298?pt=LH_DefaultDomain_0&hash=item4d14b990a2&_ uhb=1
i guess i aint gotta buy those brackets again..?
Thanks
Anjillan

Can intel 520 series SSD be installed in macbook pro mid 2009

This is some of the information for the 180g SSD I want to replace my HD in my 13" macbook pro mid 2009
25nm NAND Flash Memory
2.5” form factor
SATA 6.0 Gb/s performance
My computer though has this information for its hard drive:
Product:          MCP79 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          1.5 Gigabit
Description:          AHCI Version 1.20 Supported
I know that the SATA 6.0 will be backwards compatible with my connection, but I was wondering if I am going to hit any problems. I am going to do a full time machine backup so I can have everything cloned onto the SSD, but want to know before I buy the SSD

Recently installed same type of SSD (Intel 520 120GB) in our 2010 Macbook (white) and runs just as well as its big bro. No problems at all. Storage isn't an issue since most stuff's in the cloud these days and we carry large files around on a USB stick. Way to go!

Best SSD for late 2008 Macbook?

Afternoon,
I'm also looking for an SSD for my late 2008 aliminum Macbook. It's the 2ghz model : model number- A1278.
Can anyone suggest one that's fast and reliable, but not too exspensive. I'm looking in the 250 GB range.
THANK YOU VERY MUCH IN ADVANCE!
BertieTBE

OCZ Vertex 3! Bar none!. For this model, only 2 SSD works reliably with the MCP79 problem that hosts the sata controller. OCZ did their best work to rectify this situation where it works flawlessly now. Crucial M4 SSDs also works well without any effort. Vertex is very fast and lower cost than most SSDs due to aggressive price pushing by OCZ.
Here is the right method of doing upgrade.
1) Use a desktop PC to update the firmware of the SSD before installing. Choose Mac version or latest version.
Set the sata 2 setting and temperature fix using the CD software of OCZ. Best firmware update anyone has ever created!.
2) Put SSD in USB enclosure and connect it to your Mac. Download SuperDuper software for Mac to clone your existing disk.
3) Run SuperDuper to clone. 1 hours or less.
4) Shutdown everything and swap the HDD with the SSD.
5) On Bootup, then quickly Reset SMC, Left-Shift Control Option (3 fingers on these) and Power button. Remove Magsafe power, remove the battery, Press POWER with all those things removed for 5 sec. Put battery back, Magsafe on and power up.
6) On Powering up, quicky do NVRAM reset with OPTION COMMAND P R keys. Hold it until it chimes twice, then release. See it boot in 15 seconds and "One More thing ....."
7) Last step, on boot up, Download TRIM Enabler 2.2 and run it. Check System profiler to see it is ON. Then enjoy. Remember to backup daily or weekly, SSDs can fail anytime without warning unlike HDD.
Note: This process can save people days of agony if they simply rush into the install without understanding the process and will cause all sorts of strange problems.

Whats the best ssd drive to get for a macbook pro mid 2012 model

Hi i am thinking of upgrading my 500 GB HDD drive on my macbook pro to either a 256 GB SSD or a 500 GB SSD
i really need some advice on which SSD should i buy . would anyone be able to advice which one is the best
i was looking at a samsung 840 series 2.5 inch sata 500 GB SSD not sure what that model is like so if someone would be able to advice me it would be great
Thanks in advance

you can use any 2.5" ssd in the world
and samsung you talking about , is good and will fit in your macbook
use only 2.5" ssd , dont buy 3"
thats all

As of 2015: Best SSD for 9,2 Macbook Pro (mid-2012 non Retina)

Similar Messages

Maybe you are looking for