(as of June, 2011) Latest laptop model to run "Solaris 10"? (but not Sol11)

I want to install X64 Solaris 10 (instead of Solaris 11 Express).
Anyone got an X64 laptop pretty recently and successfully installed and configured Solaris 10? Maybe in the past couple of months?
I'd appreciate if you can share your experience.
If possible, I want to buy one from either Costco or Fry's Electronics in the price range of $300 and $600.
But, because of "Solaris 10" compatibility with graphics and networking (both wired and wireless), I've been delaying to buy a laptop.
Thanks!
- Young

OK, thanks for the correction! The Oracle download page that I tried couple of weeks ago had U8 as the latest, and I assumed it's the latest version for x86 or x64.
Do you know that "x86 Solaris 10 U9" on the link will work on a 64-bit CPU?
My main purpose of looking for a laptop is to run Oracle 11g, which is available only for x64 (and not for x86), and as long as video and Ethernet NIC drivers are working with X64 Solaris 10 U9, that should be good enough.
I don't even expect a laptop's wireless NIC and audio working.
- Young
Edited by: user7259518 on Jul 1, 2011 11:32 AM

Similar Messages

How to setting up new (June 2011) TC to do wireless time machine backup but not connected to network?

Hello. Just got new (refurbished June 2011, 2TB) Time Capsule. My building has a shared wifi network, and I'm assuming it's hard to join the network with Time Capsule and still be satisfied with security/privacy/performance. (Of course, if I'm assuming wrong, please let me know!)
My understanding is that I can use Time Capsule wirelessly to do Time Machine backups by switching out of my wireless network to - I assume - a new Time Capsule generated network(?). It's an extra step, but that beats connecting cables to the computer everytime I need to do backup. Basically it's like an external wireless hard drive that I have to join everytime the backup is updated, right? (Again, if there is a better way to go about doing this, please let me know.)
So how do I go about doing this? The setup manual isn't helpful (not at all).
Here's more detail if necessary. I have 10.8 Macbook Air (which I plan to upgrade to 10.9 soon) and my spouse is running 10.9 Macbook Pro. I am also assuming I don't have to partition Time Capsule, and when the Time Machine backs up, it'll figure who's who.
Thanks in advance.

Hello. Just got new (refurbished June 2011, 2TB) Time Capsule. My building has a shared wifi network, and I'm assuming it's hard to join the network with Time Capsule and still be satisfied with security/privacy/performance. (Of course, if I'm assuming wrong, please let me know!)
Security is ok.. but performance is abominable.
The TC unfortunately has some design limitations that Apple imposed that makes it rather poor for anything but ethernet.
There is a couple of ways around the problem of sequential internet or backups.
1. Get a wireless bridge that is suited to your in-building system.. and plug that into the TC so it can take normal router settings .. This will give you double NAT but I doubt your in building system will be handing out public IP anyway. An airport extreme can do this. Although it is pricey for the same results as a $35 standard wireless bridge. All devices in your place will then get both internet and backup direct to the TC.
One flaw here could be the download limits.. if you have two connections do you get double the downloads.. ??
ie how many IP are allocated to you?? And is it divided between all of them or the more IP clients the more download bandwidth?
2. Use a USB wireless stick in the Mac.. these can be tiny little things now.. just buy Mac compatible ones.. use that for internet and use the internal (faster) wireless for local connections. there are some manual setup tricks needed here but nothing hard.

I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM... I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM? Is there any way to get more VRAM to play games on steam?

I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM...
I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM?
Is there any way to get more VRAM to play games on steam?
I've learned by reading other topics that I can't upgrade my graphics card on my Macbook Pro because it's soldered into the motherboard or somthing like that, but please tell me if there is any way to get more video ram by chaning some setting or upgrading something else. I'd also like to know why I only have 256MB of VRAM when I have 8GB of RAM, since I have 8GB of RAM I thought I was supposed to have 560mb of VRAM...
So the two questions are...
Is there any way to upgrade my VRAM, so that I can play games on steam?
Why do I only have 256MB VRAM when I have 8GB total RAM?
Other Info:
I have a quad core i7 Processor.
My graphcics card is the AMD Radeon HD 6490M.
I am also trying to play games on my BOOTCAMPed side of my mac, or my Windows 7 Professional side.
THANK YOU SO MUCH IF YOU CAN REPLY,
Dylan

The only two items that a user can change on a MBP are the RAM and HDD (Retinas not included). You have what the unit came with and the only way you will be able to change that is to purchase a MBP with superior graphics
If you are very much into gaming, the I suggest A PC. They are far superior for that type of application to a MBP.
Ciao.

Fx:Model works with mx datagrid but not spark ??

Using the Lynda example,... the Mx DataGrid works but the Spark does not????
Model is new to Flex 4, shouldn't it work with spark?
<fx:Declarations>
<fx:Model id="productModel" source="data/products.xml"/>
</fx:Declarations>
<mx:DataGrid dataProvider="{productModel.product}"/>
<s:DataGrid dataProvider="{productModel.product}"/>

In Flex 4 there is no spark equivalent for all halo components. So there is no spark datagrid available in Flex 4. So <mx:DataGrid/> works but not <s:DataGrid/>.

My new Apple ID created on my PC laptop has populated to my phone but not my Pad?

Sorry to jump... long time listener, first time caller... I changed my Apple ID and password from my PC laptop. It populated to my 4s ok but not my iPad2... any thoughts?

If you updated your existing account then try logging out of it on the iPad by tapping on the id in Settings > iTunes & App Stores and then log back in and see if that 'refreshes' the account on the iPad.

My ipod is about 6 years old. I recently hooked it uo to my laptop and can sync my music but not my playlists

My ipod is about 6 years old. I recently hooked it up to my laptop and downloaded ITunes. I can sync my music but not my playlists in ITunes. My ipod is a classic 30GB ipod

One common cause of this is interference...try searching for other WiFi networks near you, see what channels they are using. Most folks just turn on their routers & the default channel is usually channel 1. You can try changing channels, with 1, 6 or 11 being the best, but find a channel that no network near you is using. See if that fixes things.

10.5.2 iTunes on Windows 7 x64 bit laptop - Quick Time will play videos but not iTunes

I'm hoping you can help, I've looked for a solution to this for a while now.
I store my itunes library on an external hard drive. I completed a clean install of x64 bit Windows 7 on my laptop - all went perfectly. Downloaded and installed the 64 bit version of 10.5.2 iTunes and located my library...the music plays fine but no videos. I opened iTunes in safe mode and it said that I needed the up to date version of Quick Time. Downloaded and installed that...no problems. Now my vidoes will play in the Quick Player but still not in iTunes! They apprear in the "Now Playing" pane but the timer doesn't move - even after pressing pause and play. Can anyone help me please? Do I need to open iTunes in 32 bit mode? If so, how do I do that in Windows 7? i can only find solutions for Mac's....
Thanks in advance

I should have posted this earlier, but anyway. I restored my laptop to factory version after backing up any useful data, and the first thing I the laptop was restored was connect to the internet, download and install the latest version of iTunes. And Bingo! It worked.
Apple helps you find Original Sin with the Windows.

Laptop monitor stays black with Windows but not with Ibuntu

Can someone tell me why my daughter's Compaq laptop has no video, monitor is black, in Windows Vista but works fine with Ibuntu? The service shop said it is a bad video card but wouldn't that apply to the computer and not work in either operating system. I keep trying to repair it in Vista but this has me really puzzled. If it works with one OS shouldn't it work with the other?

Hello, @cliftram
I see that the screen is black on your daughters notebook. That you've installed another OS and it was working. I will try to help you with this.
The short answers to your questions, would you're right.
"wouldn't that apply to the computer and not work in either operating system" - Yes, if the issue was a faulty graphics's card neither OS would work.
"If it works with one OS shouldn't it work with the other?" -- same answer as above.
What this indicates, is there's an issue on the Windows side.
As i'm on sure where the black screen occurs, but try booting into Safe Mode. If you can do this, then something may be going on with the OS or driver.
If you got into safe mode, try a clean boot first. Restart and try starting up normally. If this works an application on the computer is causing the issue. If to doesn't try, using the HP Recovery Manager to restore all the drivers on the notebook. (if your model doesn't have this, pleas let me know).
If you cannot even boot into Safe Mode, the only option left (if you haven't tried it), is a System Recovery (for the Windows side). Make sure you back up prior to doing this.
Let me know what you're able to do.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

CODE running in MAIN but not in a model class called by servlet

Here is my simple code to connect Weblogic server 10.3.3 using iiop protocol to use the MBeanServer. It is running perfectly when it is run as a simple java application in main() but when I try to call this code from a servlet placing it in a simple method to get an arraylist it is throwing Exception.
* I have an Admin Server and a Managed server in 10.0.32.145
* and another Managed Server on 10.0.32.146. I need to monitor these servers in a portal.
* I have a jsp which refreshes in every 10 seconds and invoke a servlet,that calls this
* method to populate data in three beans(AdminServerBean,ManSer1Bean,ManSer2Bean),add these
* beans into arraylist and return to the servlet.The servlet adds these attributes to the
* request scope and send back to jsp.
import javax.management.MBeanServerConnection;
import javax.management.ObjectName;
import javax.management.remote.JMXConnector;
import javax.management.remote.JMXServiceURL;
import javax.management.remote.JMXConnectorFactory;
import com.beans.*; //My Beans package
import java.util.ArrayList;
import java.util.Hashtable;
public class JMXCore {
     @SuppressWarnings("unchecked")
     public ArrayList<Object> connect2FetchData() throws Exception {
     ArrayList<Object> arr = new ArrayList<Object>();
JMXConnector jmxCon1 = null;
JMXConnector jmxCon2 = null;
JMXConnector jmxCon3 = null;
ObjectName on1 = new ObjectName("com.bea:ServerRuntime=AdminServer,Name=AdminServer,Type=JVMRuntime"); // Admin Server
ObjectName on2 = new ObjectName("com.bea:ServerRuntime=ManSer1,Name=ManSer1,Type=JVMRuntime"); // Managed Server 1
ObjectName on3 = new ObjectName("com.bea:ServerRuntime=ManSer2,Name=ManSer2,Type=JVMRuntime"); // Managed Server 2
try {
JMXServiceURL serviceUr1 = new JMXServiceURL("service:jmx:iiop://10.0.32.145:7001/jndi/weblogic.management.mbeanservers.runtime");
JMXServiceURL serviceUr2 = new JMXServiceURL("service:jmx:iiop://10.0.32.145:9001/jndi/weblogic.management.mbeanservers.runtime");
JMXServiceURL serviceUr3 = new JMXServiceURL("service:jmx:iiop://10.0.32.146:9001/jndi/weblogic.management.mbeanservers.runtime");
System.out.println("Connecting to: " + serviceUr1);
System.out.println("Connecting to: " + serviceUr2);
System.out.println("Connecting to: " + serviceUr3);
Hashtable env = new Hashtable();
env.put(JMXConnectorFactory.PROTOCOL_PROVIDER_PACKAGES,"weblogic.management.remote");
env.put(javax.naming.Context.SECURITY_PRINCIPAL, "contact");
env.put(javax.naming.Context.SECURITY_CREDENTIALS, "contact158");
jmxCon1 = JMXConnectorFactory.newJMXConnector(serviceUr1, env);
jmxCon2 = JMXConnectorFactory.newJMXConnector(serviceUr2, env);
jmxCon3 = JMXConnectorFactory.newJMXConnector(serviceUr3, env);
jmxCon1.connect();
System.out.println("Hello");
MBeanServerConnection con1 = jmxCon1.getMBeanServerConnection(); // MBean Server Connection No 1
System.out.println("CONNECTION TO WEBLOGIC 10.3 ESTABLISHED VIA jmxCon1");
Integer jvm_AdminServ = (Integer)con1.getAttribute(on1,"HeapFreePercent");
String status_AdminServ = null;
if(jvm_AdminServ<10){status_AdminServ = "red";} else {status_AdminServ = "lime";}
AdminServerBean asb = new AdminServerBean(String.valueOf(con1.getAttribute(on1,"Uptime")),String.valueOf(jvm_AdminServ),(String)con1.getAttribute(on1,"JavaVersion"),(String)con1.getAttribute(on1,"OSVersion"),String.valueOf(con1.getAttribute(on1,"HeapFreeCurrent")),String.valueOf(con1.getAttribute(on1,"HeapSizeMax")),String.valueOf(con1.getAttribute(on1,"HeapSizeCurrent")),(String)con1.getAttribute(on1,"OSName"),status_AdminServ);
arr.add(asb);
jmxCon2.connect();
MBeanServerConnection con2 = jmxCon2.getMBeanServerConnection(); // MBean Server Connection No 2
System.out.println("CONNECTION TO WEBLOGIC 10.3 ESTABLISHED VIA jmxCon2");
Integer jvm_ManServ1 = (Integer)con2.getAttribute(on2,"HeapFreePercent");
String status_ManServ1 = null;
if(jvm_ManServ1<10){status_ManServ1 = "red";} else {status_ManServ1 = "lime";}
ManSer1Bean msb1 = new ManSer1Bean(String.valueOf(con2.getAttribute(on2,"Uptime")),String.valueOf(jvm_ManServ1),(String)con2.getAttribute(on2,"JavaVersion"),(String)con2.getAttribute(on2,"OSVersion"),String.valueOf(con2.getAttribute(on2,"HeapFreeCurrent")),String.valueOf(con2.getAttribute(on2,"HeapSizeMax")),String.valueOf(con2.getAttribute(on2,"HeapSizeCurrent")),(String)con2.getAttribute(on2,"OSName"),status_ManServ1);
System.out.println("Manserver1 Heap Free : "+String.valueOf(jvm_ManServ1));
arr.add(msb1);
jmxCon3.connect();
MBeanServerConnection con3 = jmxCon3.getMBeanServerConnection(); // MBean Server Connection No 3
System.out.println("CONNECTION TO WEBLOGIC 10.3 ESTABLISHED VIA jmxCon3");
Integer jvm_ManServ2 = (Integer)con3.getAttribute(on3,"HeapFreePercent");
String status_ManServ2 = null;
if(jvm_ManServ2<10){status_ManServ2 = "red";} else {status_ManServ2 = "lime";}
ManSer1Bean msb2 = new ManSer1Bean(String.valueOf(con3.getAttribute(on3,"Uptime")),String.valueOf(jvm_ManServ2),(String)con3.getAttribute(on3,"JavaVersion"),(String)con3.getAttribute(on3,"OSVersion"),String.valueOf(con3.getAttribute(on3,"HeapFreeCurrent")),String.valueOf(con3.getAttribute(on3,"HeapSizeMax")),String.valueOf(con3.getAttribute(on3,"HeapSizeCurrent")),(String)con3.getAttribute(on3,"OSName"),status_ManServ2);
arr.add(msb2);
System.out.println("MBean SERVER CONNECTION OBTAINED...ArrayList Created");
     return arr;
catch(Exception e){
     System.out.println("in Catch");
     System.out.println(e.getMessage());
     e.printStackTrace();
     return null;
     finally {
          jmxCon1.close();
          jmxCon2.close();
     jmxCon3.close();
     System.out.println("CONNECTION CLOSED");
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Here is the original stacktrace:
java.io.IOException: Failed to retrieve RMIServer stub: javax.naming.NameNotFoundException: Name weblogic.management.mbeanservers.runtime is not bound in this Context
     at javax.management.remote.rmi.RMIConnector.connect(Unknown Source)
     at javax.management.remote.rmi.RMIConnector.connect(Unknown Source)
     at com.tcs.sbi.psg.monitoring.models.JMXCore.connect2FetchData(JMXCore.java:57)
     at com.tcs.sbi.psg.monitoring.servlets.Weblogic_10_Connect.doGet(Weblogic_10_Connect.java:23)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:627)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:729)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:172)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:108)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:174)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:873)
     at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
     at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
     at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:689)
     at java.lang.Thread.run(Unknown Source)
Caused by: javax.naming.NameNotFoundException: Name weblogic.management.mbeanservers.runtime is not bound in this Context
     at org.apache.naming.NamingContext.lookup(NamingContext.java:770)
     at org.apache.naming.NamingContext.lookup(NamingContext.java:153)
     at org.apache.naming.SelectorContext.lookup(SelectorContext.java:137)
     at javax.naming.InitialContext.lookup(Unknown Source)
     at javax.management.remote.rmi.RMIConnector.findRMIServerJNDI(Unknown Source)
     at javax.management.remote.rmi.RMIConnector.findRMIServer(Unknown Source)
     ... 20 more
getMessage() returns this:
Failed to retrieve RMIServer stub: javax.naming.NameNotFoundException: Name weblogic.management.mbeanservers.runtime is not bound in this Context
-------------------------------------------------------------------------------------

VC model fails for one user but not another - both have same auths

We have a VC model that we created and moved to Prod (portal NW04s connecting to BW 3.5 query). It works fine for user A, but user B gets error:
#1.5#0003BADBD644002D000000030000053D0004282F58AC16AC#1170083723088#com.sap.port
al.visualComposer_NWBIKit_logger#sap.com/irj#com.sap.portal.visualComposer_NWBIK
it_logger#DOBREGON#11523#####SAPEngine_Application_Thread[impl:3]_5##0#0#Error#1
#/System/Server#Java###Cannot execute BW query::Nested Exception. Failure to exe
cute native function. Nested Exception. INVALID_VARIABLE_VALUES
Both user have same authorizations in Portal and BW backend.
There is no trace info on the BW back end, so it seems like the hangup is occuring on the portal side.

It turns out it was the backend authorizations. The user was able to view the BW query via the BEX Explorer. But when she tried to access it via a VC Flex IView, we got that error. Initially I wasn't seeing any auth traces in the BW system, but then we expaneded the trace and determined the user was missing an activity. It's a strange error. Would be nicer to see a 'user not authorized' or something along those lines to better pinpoint the cause. But we're good now.

I have an HP laptop preloaded with Adobe Premiere Elements 10. For whatever reason Elements will "run" on click, but not even open the load screen or anything and then act like I never tried to open it? whats going on?

I bought my HP laptop in 2012, and it came preloaded with Adobe Premiere and Photoshop Elements 10
It worked fine and I even made a few video edits back in 2012 but for the last year Elements just REFUSES to work properly
I used to be able to open elements to at least the "what do you want to do?" screen
But now It won't even open this...I have no idea why...
If I double click the Elements application my computer slows down, bracing itself to load, and then ....thats it....it reverts to its normal speed and elements just doesn't open...
Any help would be great cause I feel like I've exhuasted all self-troubelshooting options and need to either get help from the forums or take the laptop in before I smash it in rage

thrillhousecody
Thanks for the reply with additional information.
Recent history for Premiere Elements points to the program having problems when more than 1 video card/graphics card is
being used by the computer on which Premiere Elements is running. This observation may seem contra indicated by the fact
that you say that the program did work well about 2 years ago in the same setup. But other factors may have set in with regard
to drivers, drivers versions, and driver conflicts. But this factor, does need to be ruled in or out.
Can you disable one or the other card to determine the impact of this on your problem?
But, of prime concern with regard to video card/graphics card is the use of a NVIDIA GeForce card with Premiere Elements 10.
Even if your NVIDIA GeForce were the only card, Premiere Elements 10 will not work properly unless the NVIDIA GeForce driver
version is rolled back to about May 2013. This may be one of the major factors here.
a. Device Manager/Display Adapters and find out Driver Version and Driver Date
b. Read the background information for the Premiere Elements 10/NVIDIA GeForce issue
ATR Premiere Elements Troubleshooting: PE10: NVIDIA Video Card Driver Roll Back
Also see the Announcement at the top of this forum regarding the matter - also with full details of the situation and how to fix with the
driver version roll back.
Please review and consider and then we can decide what next.
Thanks.
ATR
Add On...This NVIDIA GeForce situation is specific for Premiere Elements 10. You should not expect to see the problem for
later versions of Premiere Elements.

Flow text in Word for Mac 2011 works from page 1 to page 2, but not from page 2 to page 1. Does anyone know a fix for this, please?

Does anyone know how to get text to flow from page 2 to page 1 in Word for Mac 2011, please?
To try it, create a fair size text box on page 2 and fill it right up with text.
Next, reduce the text box size so that the text box is over-full.
Then Flow this overflow into a new text box on page 1.
What appears also disappears, especially if you try to print.
Does anyone else have this problem?
Does anyone else know a

With some advice, I was able to solve my problem by opening Word and then Force Quit Word. When I re-opened Word, it had returned to normal.
Note: I had already tried the expedient of restarting my computer without solving my Word problem. But Force Quit did the job.
Acadieman

2011 Macbook Pro 13, green light on magsafe, but not charging, not powering on

Hi there, I have a Macbook Pro 13 early 2011 i5, and it's stoped working, when it's on the charger the green light comes on, when i pres battery indicator on the side of mbp there is only one green light flashing. when i press power button nothing hapends, mbp wont turn on, i have tried to do the reset, did not helped. Maby someone had, the same problem and knows how to fix it, or knows if its completle dead, and not worth to fix. Thanks

Take the machine to an Apple Store or an AASP and have them run diagnostics on it. They will give you a quote on how much it would cost to fix your machine. Then you can decide if it's worth repairing or if its just time to replace it.
I'm assuming that you didn't buy the extended AppleCare warranty? Too bad - if you had the machine would likely be repaired free of charge...
Clinton

I have Iphone 5 ... Started to download latest app for Candy Crush .. But not enough storage .. How do I stop .. Using data ... But not highlighted at the bottom of opened apps .. When I double button at bottom .. Thanks Sharn

I have Iphone 5 .. Tried to download latest version of Candy Crush .. Using data .. But can't stop it ... Have turned phone on and off .. Deleted some apps I don't use .. When I double tap button .. It's still there ... But unhighlighted ... Question .. How do I get rid of it before I have no free Data left.
Please HELP ... Thanks Sharn

1) There is no such thing as "free data".
2) Just because the app is stuck downloading does not mean it is actually downloading or using data.
3) Reset the device by pressing and holding the Home and Power buttons until the white Apple logo appears.
If this does not allow the app to finish downloading, simply delete it as you would any other app.

Lens models selectable for CR2 files, but not selectable for JPegs

Hi,
When applying the lens profile for CR2 images, Lightroom displays in extensive list of lens models to choose from. The list for CR2 images includes the Canon 18-200 IS lens that I use. However when developing a JPeg only image, the lens model list only displays about 20 canon lens models - which unfortunately doesn't include the Canon 18-200 IS lens. Any help appreciated to enable selecting the full list for jpeg only files?

What you're seeing is what's available. The lens profiles are for either jpg or raw, and there are fewer jpg profiles.
You could download Adobe's free utility that creates lens profiles and roll your own, or use the lens profile downloader that comes with the aforementioned creator to possibly download a profile for your lens created by another user (if one exists).
Hal

(as of June, 2011) Latest laptop model to run "Solaris 10"? (but not Sol11)

Similar Messages

Maybe you are looking for