As of today photoshop 11 will not recognize my scanner.

As of today, Photoshop 11 will not recognize my scanner. It was working fine before. My scanner is connected via wifi. Yesterday I lost the wifi connection so i reinstalled the scanner (cannon printer MG6120). Now it prints photos ok but I can not scan. It gives me an error that says I must connect my scanner to the computer.

Brian, Thank you for your help. I went to preferences and changed to a different printer and know it works. Thanks again.
From: LittlePaleFace
To: [email protected]
Sent: Friday, January 25, 2013 1:42 PM
Subject: As of today photoshop 11 will not recognize my scanner.
Re: As of today photoshop 11 will not recognize my scanner.
created by LittlePaleFace in Photoshop Elements - View the full discussion

Similar Messages

Photoshop 7 will not recognize my fire wire drives as scratch disks

Photoshop 7 will not recognize my fire wire drives as scratch disks.
Using Photosop 7.0.1 & Mac OS X Tiger on G4 Tower with AGP Graphics.
Any Ideas?
Thanks in advance,
Tom

The drives need to be formatted as Macintosh HFS+ Extended (not Windows or FAT32, for instance), and you must have full read/write permissions to them.
Otherwise, Photoshop will not let you select them as scratch disk drives. Of course, formatting will completely erase the entire drive, so if you have anything on them you need to keep, you'll need to back it up first.
If necessary, do a Get Info (Command I) on the icon of the drive in the Finder and check "Ignore Ownership on this drive"; but first the drive needs to be formatted as Macintosh Extended.

My photoshop cs5 will not recognize raw photos from my canon eos 70d

my photoshop cs5 will not recognize raw photos from my canon eos 70d

No. DNG is a RAW format. There are a few small manufacturer specific items that are left out when converted to RAW (for example, Nikon's Active D lighting) that aren't maintained, as well as some Meta data and focus points, etc. Personally I never noticed the difference, but perhaps some do. There is no impact to the image quality, you have just as much post production freedom with DNG.
I did it for a couple years before upgrading to CS6. It's an extra step, but you get used to it and it's not a huge deal. I would put my card in my reader, and download to a temp file. While that downloaded I would go to the fridge and grab a beer [Edit - you can substitute the beverage of your choice ]. Then I would run the RAW to DNG converter, and drink my beer. It was usually done before my beer (if not I got another). I saved the CR2 files as a backup at first, but once I got comfortable trusting DNG I stopped doing that.
Another option is to get Lightroom and use that for your developing. You can then send over a TIFF file with the edits. But in this situation you couldn't send the image over as a smart object (I think, I assume this would use ACR?).

Photoshop CS3 does not recognize the scanner Epson Perfection 1670

I'm an new Mac-User on an iMac 24", 2,4 GHz with Leopard. So I will scan some photos, but the Epson Scanner will not be recognize under CS3. Somebody, who can help???
Thanks so much!

Jaclyn.
That is as expected, if you are running a Mac-Intel machine.
When you run CS on a Mac-Intel box, it runs in Rosetta, which emulates a PPC Mac (non-Intel box).
But CS3 runs native in Universal Binary, so it needs Universal Binary drivers.
You can get your scanner to run with CS3 if you set CS3 to run in Rosetta emulation software, but you will experience a substantial performance hit.
The best solution is to scan outside of Photoshop.
This has been covered to death here. Please do a forum search on
Rosetta.

WiFi 3G IPad 2 not recognizing WiFi and only recognizing 3G. Have only had the device 4 days and was working until today. Now will not recognize WiFi and will only run on 3G.

Received new IPad 2 4 days a ago. Set-up WiFi on home network and 3G on At&T service all has been working until today. I turned 3G off Thursday so that WiFi was the primary source. Yesterday went to a friends house and IPad recognized WiFi and was able to use. Today not able to use WiFi at home only 3G. WiFi is working on my laptop so that is not the issue. Is there something that I am missing?

WiFi is on, but system is not recognizing it. I am not fimiliar with Ask feature, what is this? I have noticed from other posts that my WiFi indicator in the top left is grayed out. I have tried restore settings that some people have recommended. Sounds like alot of people are having problems with the newest launch of the IPad 2. I had put that I have the iOS 4.3.2 but it is iOS 4.3.3. Is there any problems with this operating system?

Photoshop CS6 will not recognize my creative cloud serial number

application manger asks for a serial number, but when i enter the one on my account for my subscription it tells me its invalid. Mutliple calls to support are disconnected. Chat is a 45 minutes and counting...any suggestions as to how i might be able to use my lisenced software?

There are no serial numbers for Cloud apps. They're activated via your Adobe ID.
There should be a License This Software button when you launch the app.
http://forums.adobe.com/message/4397400

PHOTOSHOP CS4 DOES NOT RECOGNIZE MY SCANNER

I just installed Photoshop CS4 64 bit in a new computer with Windows 7. I downloaded and installed Twain Driver and Epson Scan Utility v3.04A as recommended by Epson for my Epson Perfection 4990 Photo Scanner to use with Windows 7. The scanner works fine as a stand alone and works with Microsoft Paint, so the drivers seem to be installed correctly. But when I open PSCS4 and go to file/automate, the scanner is not seen.
I spoke with Epson tech support who tells me I am missing a 64 bit twain plug in for PSCS4 which is required for the scanner to be recognized by PS. They said there is no problem with 32 bit, but I need to wait for this 64 bit Twain Plug in to be released by either Adobe or Microsoft in order for this to work with my set up.
What are people doing with PSCS4 and Windows 64 bit and Epson scanner? I realize I can scan outside of Photoshop as a work around, but this is not ideal. Any suggestions.
Thanks,
Matthew Kraus

As John Joslin suggested... try VueScan. Excellent scanning software, very reasonably priced, unlimited upgrades, less than U$ 100. Just check if your scanner is supported (i just checked and it seems to be).
http://www.hamrick.com/
I used to use it and found it excellent. In fact, one of the cool things was that i could do all my scans in one session and then open the images in PS when i wanted / needed to work on them.

Windows 10 will not recognize my scanner

My computer tells me I need a WIA driver. How do I do this?

I phoned HP Support. 15 minutes later the problem was solved.

Photoshop CS4 does not recognize raw photos taken with newer cameras. Anyone else have this problem?

Photoshop CS4 will not recognize RAW2 photos taken with my new Panasonic Lumix FZ100 camera. This camera is listed in Adobe's 6.2 Camera Raw update for Photoshop CS5 but cannot be loaded in CS4. I paid a lot of money for CS4 and don't want to buy CS5 just because I bought a new camera, but it appears that Adobe no longer updates Camera Raw for CS4 or with newer cameras. When I called the Help Desk to find out if there was some kind of patch I could get to make CS4 compatible with my new camera a gentleman in New Delhi informed me that he couldn't even answer my question until I paid $40 since answering questions about CS4 was a "paid service." I hung up in a rage. Does anyone else have this problem and is there a solution?

This camera is listed in Adobe's 6.2 Camera Raw update for Photoshop CS5 but cannot be loaded in CS4.
Adobe does indeed not update obsolete versions of Camera Raw for new camera types.
And guess what: It’s the camera producers who seem to like to change their raws – so how about spreading some of your indignation their way?
I paid a lot of money for CS4 and don't want to buy CS5 just because I bought a new camera
The upgrade is cheaper than buying the full version.
Anyway, you could try the free DNG Converter which should be able to handle everything the most recent version of Camera Raw can handle.
Edit:
http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Macintosh&promoid= HTENC

HT201335 It got nA new router today and wanted to turn on apple tv but my remote app on iPad and iPhone will not recognize apple tv. Btw- I do not have apple tv remote.

It got A new router today and wanted to turn on apple tv but my remote app on iPad and iPhone will not recognize apple tv. Btw- I do not have apple tv remote.

It reboots it but unplugging can also rectify communication issues like this. A restore would be the next step.

Adobe Photoshop Elements 9 will not recognize Epson V600 Photo scanner for film ?

For some reason the WIA support in PE9 will only recognize the scanner for reflective prints not film, why ?
But, in the PE 6 the Epson V600 scanner is recognized for film scanning,, in professional mode and automatic.
Any clues ?
Message was edited by:Photographer & Dell Technical Service solved this issue to-day 11/02/2015
Message was edited by: Bob Dix

See this Tech doc:
http://helpx.adobe.com/photoshop-elements/kb/twain-installed-photoshop-elements-11.html

Photoshop will not recognize my Canon D6 raw photos. Have run update,still not working.Suggestions

Photoshop CS5 will not open my Canon D6 images in raw. Tried both ps and bridge. Have run updates. Have installed Canon utility files. Still does not recognize the format. Any suggestions?

Hi,
Photoshop cs5 won't update to the camera raw plugin required (7.3) for the canon 6d camera raw files.
Other than upgrading to photoshop cs6 you could use the free 7.3 DNG Converter to convert your files to dng copies which cs5 should then open.
Or look at Lightroom which is cheaper than an upgrade to cs6.
dng converter:
mac:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5518
windows:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5519

Photoshop will not recognize upgraded RAM.

I recently upgraded my Mac Pro to about twice the RAM it had before. Sadly, my Photoshop CS5 does not recognize the upgrade and insists that my drive does not have enough RAM to open GL. It won't save preferences and doesn't recognize me as an administrator and will not recognize that photoshop is unlocked. Lots of issues. I've tried uninstalling and reinstalling the program with no success. Any suggestions.

Photoshop already recognizes your added RAM, because it gets the RAM information from the OS every time it launches. See the details in the performance panel of preferences.
But you're talking about a warning that tells you you don't have enough VRAM on your video card - and that has little or nothing to do with the DRAM installed in your machine.
For VRAM, you'd have to upgrade your video card/GPU.

I had no trouble syncing my ipod touch until today. The computer will not recognize it? I have tried everything on the troubleshooting recs. Please help!

I had no trouble syncing my ipod touch until today. The computer will not recognize it. I have tried everything on the troubleshooting guide. Help?!

http://support.apple.com/kb/TS1538
This fixed mine.

TS1363 my computer will not recognize my iphone

My iphone has been working fine with my computer. After I did an update for itunes today, the phone froze up and will not work at all. It has a picture stating to connect it to itunes, which it is. The itunes will not recognize the iphone now. help!

Phone not recognised in itunes
device not recognised by iTunes on PC or device not recognised by iTunes on Mac
Some of those things which concern itunes also help with your problem. In particular try rebooting the computer, try a different USB cable to attach the phone or try a different port

As of today photoshop 11 will not recognize my scanner.

Similar Messages

Maybe you are looking for