As on date stock
Dear Gurus,
How can I get the stock quantity & valuation as on date at info cube level.
SP
Have you already implemented the Inventory scenario?
Please check the Inventory Help section as it has the necessary details.
http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
Regards
Anujit Ghosh
Similar Messages
-
No stock showing in Inventory on date stock report
Hi
I have created a Stock on date query at plant material level using standard cube 0IC_C03
to get stock quantity on posting date i have restricted 0TOTALSTCK
by 0CALDAY variable .
Correct me if any thing wrong to get on date stock.
When i m executing that report for date 20.07.2009 , it shows 0 qty for a given Plant(1001) and a given material(ABC)
where MB5B report in R/3 with same date show sum stock qty.
again i executed the report with 17.07.2009 , on which the material(ABC) was lastly transacted for that given plant(1001)
for this date i m able to match the qty with MB5B.
Then i check sum other stock report which is at 0CALMONTH level wen executed with 07.2009 shows correct qty.
Now my question is y it is showing 0 qty wen the stock is there in it ? is query definition not proper to get stock on date ?
Thanks and regards,
Sonal....Hi,
No need to restict.
in rows, calday, plant, materials
in column 0TOTALSTCK.
for 2 days data will look like this.
19/07/2009 -- 1001 -- 011235 --- 256 KG
20/07/2009 -- 1001 -- 011235 --- 280 KG
stock as on 19 in MB5B, after recipts and issue is 256 KG.
stock as on 20 th in MB5B, after recipts and issue is 280 KG.
based on issues and recipts, data will be added to total stock.
yes, stock will be last date posting date. as on today we can validate data till yesterday.
one more thing for plant whose values are not matching, did to drill down stock type and stock category and check data.
use RWBE t-code also for validation.
Best Regards. -
All Inventories Value Report&Inventory Ageing Report& Current And as on Date Stock not matching
Hello All,
I am new to inventory. I need some help.
After opening the periods of purchasing and inventory for the month of April'15. The below reports should match in costing.
But they are not matching. Kindly help on this as its PROD.
Inventory Ageing Report
Current And as on Date Stock Statement With Value Report
All Inventories Value Report - Average Costing
Thanks
RRMBEWH is the valuation history, this is only updated with the first movement after a period closure. And the period is a month.
There is no table in SAP that holds the stock information on daily basis.
You have to develope this yourself. Easiest method by copying a table like MBEW and MARD daily to a Z-Table.
A stock situation at a certain date can be calculated with MB5B.
Edited by: Jürgen L. on Aug 5, 2008 4:06 PM -
Calculating as on date stock as in MB5B
Hi Team,
i debugged MB5B & MD04 and searched in SDN too but did not get the logic.
in my current logic i am using mara, marc mard, mkpf and mseg tables...
i've joined mara and marc tables. joined mkpf and mseg tables.
i am calucating mard(labst umlme insme speme einme retme) data also.
But could not able to get the as per the input given date.
Could anyone please let me know the procedure to calculate the as on date stock.
Regards,
ChinnaDid you look at this?
MB5B Report -
Hi
We are customize the report refer to MB5B.
in mb5b it show the total value and the stock for the material for the date that we gvien. ( even in the old date)
we trying to capture the value for stock for stor location wise.
we need to know that how the system calculate the old price of the particular day stock.
suppose i need to calculte stock 100 pc on 01.01.2009.
from which table system pick the particular price of the material.hello,
can you please tell me the logic that you have used to ahceive this.
THanks
Sam -
Dear Sir,
Require one report for material inward and outward purpose, like below :----
Stock ledger date wise ________________
Posting Date Material code Opening Stock qty Receipt qty Issued qtyc losing Stock Mvt
This require with WBS /Project/Sales Order also .
*_Kindly note - SAP Standred report MB5B not usefull for us.
Thanks & Regards
Mukesh Chejara
SAP
+9198702226621Concerning posting date you check in the table MKPF.
So to summarize you use the Tables MSEG et MKPF
regards -
Hi, Abap Experts,
I have to make a batch wise back dated stock report.
Can any one help me to give name of stocks table for required query.
Any help will be appresiable.
Regards
Rajiv singh.Hi Rajiv,
Stock as per storage location is stored in MARD table and for batch related stocks we have the table MCHB.
However, for history we also have history tables for each of these, viz.
MARDH for Storage Location History and
MCHBH for Batch Stock History
Cheers,
Aditya -
Modification in MB5B prg...material stock between a date range
Hi experts
I have to modify mb5b tranx prg . presently we are using date as selection criteria..but now onwards user wants G/L account along with date as selection criteria. I created one selec-option for field HKONT type hkont-bseg. Now in select queries i need ur help ..Kindly tell me where i need to use this field in my select queries to fetch RELEVANT data.
Regards
Anu
CODE:
REPORT ZRM07MLBD NO STANDARD PAGE HEADING MESSAGE-ID M7 LINE-SIZE 280.
********my change*******
tables : BSEG.
TYPE-POOLS: IMREP, " Typen Bestandsführungsreporting
SLIS. " Typen Listviewer
INCLUDE ZRM07MLDD.
DATA FLAG(1) TYPE C VALUE ' '.
DATA BAL_QTY TYPE P DECIMALS 2.
DATA BAL_AMT TYPE P DECIMALS 2.
*include: rm07mldd. " reportspezifische Datendefinitionen
"n571473
define the selection screen here "n571473
"n571473
SELECTION-SCREEN BEGIN OF BLOCK DATABASE-SELECTION
WITH FRAME TITLE TEXT-001.
Text-001: Datenbankabgrenzungen
SELECT-OPTIONS: MATNR FOR MARD-MATNR MEMORY ID MAT
MATCHCODE OBJECT MAT1,
BUKRS FOR T001-BUKRS MEMORY ID BUK,
WERKS FOR T001W-WERKS MEMORY ID WRK,
LGORT FOR T001L-LGORT,
CHARG FOR MCHB-CHARG,
BWTAR FOR MBEW-BWTAR,
BWART FOR MSEG-BWART.
PARAMETERS SOBKZ LIKE MSEG-SOBKZ.
SELECTION-SCREEN SKIP.
SELECT-OPTIONS: DATUM FOR MKPF-BUDAT NO-EXTENSION,
**********my change**************
HKONT FOR BSEG-HKONT.
********END CHANGE************
SELECTION-SCREEN END OF BLOCK DATABASE-SELECTION.
SELECTION-SCREEN BEGIN OF BLOCK BESTANDSART
WITH FRAME TITLE TEXT-002.
Text-002: Bestandsart
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS LGBST LIKE AM07M-LGBST RADIOBUTTON GROUP BART DEFAULT 'X'.
SELECTION-SCREEN COMMENT 4(50) TEXT-010 FOR FIELD LGBST.
Text-010: Lagerort-/Chargenbestand
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS BWBST LIKE AM07M-BWBST RADIOBUTTON GROUP BART.
SELECTION-SCREEN COMMENT 4(50) TEXT-011 FOR FIELD BWBST.
Text-011: bewerteter Bestand
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS SBBST LIKE AM07M-SBBST RADIOBUTTON GROUP BART.
SELECTION-SCREEN COMMENT 4(50) TEXT-012 FOR FIELD SBBST.
Text-012: Sonderbestand
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK BESTANDSART.
Commented By Rachit Material group Not Required
improved definition of parameters for scope of list "n599218
*SELECTION-SCREEN BEGIN OF BLOCK MARA WITH FRAME TITLE TEXT-040.
**selection-screen begin of line.
*PARAMETERS P_MATKL LIKE MARA-MATKL.
**selection-screen end of line.
**SELECTION-SCREEN COMMENT 4(50) TEXT-030 for fieLD s_matkl.
*SELECTION-SCREEN END OF BLOCK MARA.
SELECTION-SCREEN BEGIN OF BLOCK LISTUMFANG
WITH FRAME TITLE TEXT-003. "Listumfang
the following 3 parameters became obsolete do not use "n599218
anymor. They are still here to inform the user about "n599218
that he is using old variants or SUBMIT commands "n599218
PARAMETERS : "n599218
XONUL LIKE AM07M-XONUL NO-DISPLAY, "n599218
XVBST LIKE AM07M-XVBST NO-DISPLAY, "n599218
XNVBST LIKE AM07M-XNVBS NO-DISPLAY. "n599218
7 new categories for the scope of list "n599218
"n599218
cat. I docs I stock on I I stock on I Parameter "n599218
I I start date I I end date I "n599218
---+--+--------++------+-------- "n599218
1 I yes I = zero I = I = zero I pa_wdzer "n599218
2 I yes I = zero I <> I <> zero I pa_wdzew "n599218
3 I yes I <> zero I <> I = zero I pa_wdwiz "n599218
4 I yes I <> zero I <> I <> zero I pa_wdwuw "n599218
5 I yes I <> zero I = I <> zero I pa_wdwew "n599218
I I I I I "n599218
6 I no I = zero I = I = zero I pa_ndzer "n599218
7 I no I <> zero I = I <> zero I pa_ndsto "n599218
"n599218
definition of the pushbutton : show or hide the following "n599218
parameters for the scope of list "n599218
SELECTION-SCREEN PUSHBUTTON /1(20) PB_LIU "n599218
USER-COMMAND LIU. "n599218
"n599218
text line : materials with movements "n599218
SELECTION-SCREEN BEGIN OF LINE. "n599218
SELECTION-SCREEN COMMENT 1(55) TEXT-072 "n599218
MODIF ID LIU. "n599218
SELECTION-SCREEN END OF LINE. "n599218
"n599218
with movements / start = zero = end = zero "n599218
1 I yes I = zero I = I = zero I pa_wdzer "n599218
SELECTION-SCREEN BEGIN OF LINE. "n599218
SELECTION-SCREEN POSITION 2. "n599218
PARAMETERS : PA_WDZER LIKE AM07M-MB5B_XONUL "n599218
MODIF ID LIU. "n599218
text-083 : no opening stock ; no closing stock "n599218
SELECTION-SCREEN COMMENT 5(70) TEXT-083 "n599218
FOR FIELD PA_WDZER "n599218
MODIF ID LIU. "n599218
SELECTION-SCREEN END OF LINE. "n599218
"n599218
with movements / start = zero = end <> zero "n599218
2 I yes I = zero I <> I <> zero I pa_wdzew "n599218
SELECTION-SCREEN BEGIN OF LINE. "n599218
SELECTION-SCREEN POSITION 2. "n599218
PARAMETERS : PA_WDZEW LIKE AM07M-MB5B_XONUL "n599218
MODIF ID LIU. "n599218
text-084 : no opening stock ; with closing stock "n599218
SELECTION-SCREEN COMMENT 5(70) TEXT-084 "n599218
FOR FIELD PA_WDZEW "n599218
MODIF ID LIU. "n599218
SELECTION-SCREEN END OF LINE. "n599218
"n599218
with movements / start stock <> 0 / end stock = 0 "n599218
3 I yes I <> zero I <> I = zero I pa_wdwiz "n599218
SELECTION-SCREEN BEGIN OF LINE. "n599218
SELECTION-SCREEN POSITION 2. "n599218
PARAMETERS : PA_WDWIZ LIKE AM07M-MB5B_XONUL "n599218
MODIF ID LIU. "n599218
text-085 : with opening stock ; no closing stock "n599218
SELECTION-SCREEN COMMENT 5(70) TEXT-085 "n599218
FOR FIELD PA_WDWIZ "n599218
MODIF ID LIU. "n599218
SELECTION-SCREEN END OF LINE. "n599218
"n599218
with movements / with start and end stocks / different "n599218
4 I yes I <> zero I <> I <> zero I pa_wdwuw "n599218
SELECTION-SCREEN BEGIN OF LINE. "n599218
SELECTION-SCREEN POSITION 2. "n599218
PARAMETERS : PA_WDWUW LIKE AM07M-MB5B_XONUL "n599218
MODIF ID LIU. "n599218
with opening stock ; with closing stock ; changed "n599218
SELECTION-SCREEN COMMENT 5(70) TEXT-086 "n599218
FOR FIELD PA_WDWUW "n599218
MODIF ID LIU. "n599218
SELECTION-SCREEN END OF LINE. "n599218
"n599218
with movements / with start and end stock / equal "n599218
5 I yes I <> zero I = I <> zero I pa_wdwew "n599218
SELECTION-SCREEN BEGIN OF LINE. "n599218
SELECTION-SCREEN POSITION 2. "n599218
PARAMETERS : PA_WDWEW LIKE AM07M-MB5B_XONUL "n599218
MODIF ID LIU. "n599218
with opening stock ; with closing stock ; non-changed "n599218
SELECTION-SCREEN COMMENT 5(70) TEXT-087 "n599218
FOR FIELD PA_WDWEW "n599218
MODIF ID LIU. "n599218
SELECTION-SCREEN END OF LINE. "n599218
"n599218
text line : materials without movements "n599218
SELECTION-SCREEN BEGIN OF LINE. "n599218
SELECTION-SCREEN COMMENT 1(55) TEXT-073 "n599218
MODIF ID LIU. "n599218
SELECTION-SCREEN END OF LINE. "n599218
"n599218
materials without movements / stocks = zero "n599218
6 I no I = zero I = I = zero I pa_ndzer "n599218
SELECTION-SCREEN BEGIN OF LINE. "n599218
SELECTION-SCREEN POSITION 2. "n599218
PARAMETERS : PA_NDZER LIKE AM07M-MB5B_XONUL "n599218
MODIF ID LIU. "n599218
text-083 : no opening stock ; no closing stock "n599218
SELECTION-SCREEN COMMENT 5(70) TEXT-083 "n599218
FOR FIELD PA_NDZER "n599218
MODIF ID LIU. "n599218
SELECTION-SCREEN END OF LINE. "n599218
"n599218
materials without movements / with start or end stock "n599218
7 I no I <> zero I = I <> zero I pa_ndsto "n599218
SELECTION-SCREEN BEGIN OF LINE. "n599218
SELECTION-SCREEN POSITION 2. "n599218
PARAMETERS : PA_NDSTO LIKE AM07M-MB5B_XONUL "n599218
MODIF ID LIU. "n599218
with opening stock ; with closing stock ; non-changed "n599218
SELECTION-SCREEN COMMENT 5(70) TEXT-087 "n599218
FOR FIELD PA_NDSTO "n599218
MODIF ID LIU. "n599218
SELECTION-SCREEN END OF LINE. "n599218
"n599218
SELECTION-SCREEN END OF BLOCK LISTUMFANG.
SELECTION-SCREEN BEGIN OF BLOCK EINSTELLUNGEN
WITH FRAME TITLE TEXT-068. "Settings
parameter for totals only - hierseq. list
corresponding display variant
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 1.
PARAMETERS XSUM LIKE AM07M-XSUM.
SELECTION-SCREEN COMMENT 4(60) TEXT-090 FOR FIELD XSUM.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(30) TEXT-091 FOR FIELD PA_SUVAR.
*Commented by Rachit
SELECTION-SCREEN POSITION 40.
PARAMETERS: PA_SUVAR LIKE DISVARIANT-VARIANT.
SELECTION-SCREEN END OF LINE.
parameter for totals only - flat list + corresponding display variant
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 1.
PARAMETERS PA_SUMFL LIKE AM07M-XSUM.
SELECTION-SCREEN COMMENT 4(60) TEXT-092 FOR FIELD PA_SUMFL.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(30) TEXT-091 FOR FIELD PA_SFLVA.
SELECTION-SCREEN POSITION 40.
PARAMETERS: PA_SFLVA LIKE DISVARIANT-VARIANT.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 1.
PARAMETERS XCHAR LIKE AM07M-XCHRG.
SELECTION-SCREEN COMMENT 4(50) TEXT-015 FOR FIELD XCHAR.
Text-015: nur chargenpflichtige Materialien
Das Kennzeichen 'xchar' bestimmt die Art der Listausgabe entweder
auf Material- oder Chargenebene.
SELECTION-SCREEN END OF LINE.
the function "No reversal movements" is only "n571473
available from relaese 4.5B and higher "n571473
( TEXT-026 : No reversal movements ) "n571473
SELECTION-SCREEN BEGIN OF LINE. "n571473
SELECTION-SCREEN POSITION 1. "n571473
PARAMETERS NOSTO LIKE AM07M-NOSTO. "n571473
SELECTION-SCREEN COMMENT 4(50) TEXT-026 "n571473
FOR FIELD NOSTO. "n571473
SELECTION-SCREEN END OF LINE. "n571473
SELECTION-SCREEN END OF BLOCK EINSTELLUNGEN.
*Rachit
SELECTION-SCREEN BEGIN OF BLOCK LISTE WITH FRAME TITLE TEXT-040.
PARAMETERS: P_VARI LIKE DISVARIANT-VARIANT.
SELECTION-SCREEN END OF BLOCK LISTE.
HAUPTPROGRAMM *********************************
F4-Hilfe für Reportvariante -
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_VARI.
PERFORM F4_FOR_VARIANT.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR PA_SFLVA.
PERFORM VARIANT_VALUE_REQUEST_F4
USING PA_SFLVA G_S_VARI_SUMFL.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR PA_SUVAR.
PERFORM VARIANT_VALUE_REQUEST_F4
USING PA_SUVAR G_S_VARI_SUMHQ.
"n599218
INITIALIZATION "n599218
"n599218
"n599218
INITIALIZATION.
CLEAR : G_S_VARI_SUMHQ, G_S_VARI_SUMFL.
REPID = SY-REPID.
VARIANT_SAVE = 'A'.
preprae the working areas for the variants
MOVE : REPID TO G_S_VARI_SUMHQ-REPORT,
'SUHQ' TO G_S_VARI_SUMHQ-HANDLE,
REPID TO G_S_VARI_SUMFL-REPORT,
'SUFL' TO G_S_VARI_SUMFL-HANDLE.
MOVE-CORRESPONDING : G_S_VARI_SUMHQ TO G_S_VARI_SUMHQ_DEF,
G_S_VARI_SUMFL TO G_S_VARI_SUMFL_DEF.
PERFORM GET_THE_DEFAULT_VARIANT
USING PA_SFLVA
G_S_VARI_SUMFL
G_S_VARI_SUMFL_DEF.
PERFORM GET_THE_DEFAULT_VARIANT
USING PA_SUVAR
G_S_VARI_SUMHQ
G_S_VARI_SUMHQ_DEF.
PERFORM INITIALISIERUNG.
get the parameters from the last run "n547170
PERFORM ESDUS_GET_PARAMETERS. "n547170
set flag when INITILIZATION is processed
MOVE 'X' TO G_FLAG_INITIALIZATION.
"n599218
AT SELECTION-SCREEN "n599218
"n599218
Prüfung der eingegebenen Selektionsparameter, -
Berechtigungsprüfung -
AT SELECTION-SCREEN.
the following 3 parameters XONUL, XVBST, and XNVBST "n599218
became obsolete; send error when they should be filled. "n599218
This could be possible if the user works with old "n599218
selection variants or this report is launched by a "n599218
SUBMIT command "n599218
IF XONUL IS INITIAL AND "n599218
XVBST IS INITIAL AND "n599218
XNVBST IS INITIAL. "n599218
ok, the old parameters are empty "n599218
ELSE. "n599218
text-088 : note 599218 : obsolete parameter used "n599218
MESSAGE E895 WITH TEXT-088. "n599218
ENDIF.
did the user hit the pushbutton "Category" ? "n599218
CASE SSCRFIELDS-UCOMM. "n599218
WHEN 'LIU '. "n599218
yes, the pushbutton "Category" was hit "n599218
IF G_FLAG_STATUS_LIU = C_HIDE. "n599218
show the 7 parameters on the selection srceen "n599218
MOVE C_SHOW TO G_FLAG_STATUS_LIU. "n599218
ELSE. "n599218
hide the 7 paramaters "n599218
MOVE C_HIDE TO G_FLAG_STATUS_LIU. "n599218
ENDIF. "n599218
ENDCASE. "n599218
"n599218
go on only if the user wants to launch this report "n599218
CHECK : SY-UCOMM = 'ONLI' OR "n599218
SY-UCOMM = 'PRIN' OR "n599218
SY-UCOMM = 'SJOB'. "n599218
only one sum function can be processed
IF XSUM = 'X' AND
PA_SUMFL = 'X'.
SET CURSOR FIELD 'XSUM'.
select one sum list only
MESSAGE E895 WITH TEXT-093.
ENDIF.
PERFORM EINGABEN_PRUEFEN.
SET CURSOR FIELD 'PA_SFLVA'.
PERFORM VARIANT_CHECK_EXISTENCE
USING PA_SFLVA
G_S_VARI_SUMFL
G_S_VARI_SUMFL_DEF.
SET CURSOR FIELD 'PA_SUVAR'.
PERFORM VARIANT_CHECK_EXISTENCE
USING PA_SUVAR
G_S_VARI_SUMHQ
G_S_VARI_SUMHQ_DEF.
check whether FI summarization is active and other "n547170
restrictions could deliver wrong results "n547170
PERFORM F0800_CHECK_RESTRICTIONS. "n547170
- the user wants to surpress the reversal movements : "n497992
process warning M7 392 "n497992
IF NOT NOSTO IS INITIAL. "n497992
emerge warning ? "n497992
CALL FUNCTION 'ME_CHECK_T160M' "n497992
EXPORTING "n497992
I_ARBGB = 'M7' "n497992
I_MSGNR = '392' "n497992
EXCEPTIONS "n497992
NOTHING = 0 "n497992
OTHERS = 1. "n497992
"n497992
IF SY-SUBRC <> 0. "n497992
SET CURSOR FIELD 'NOSTO'. "n497992
to surpress the reversal movements could cause ... "n497992
MESSAGE W392. "n497992
ENDIF. "n497992
ENDIF. "n497992
carry out special authotity check for the tax auditor "n547170
PERFORM TPC_CHECK_TAX_AUDITOR. "n547170
does the user wants a selection via company code or a plant ?
fill range table g_ra_werks
REFRESH : G_RA_BWKEY, G_RA_WERKS, G_T_ORGAN.
CLEAR : G_RA_BWKEY, G_RA_WERKS, G_T_ORGAN, G_S_ORGAN.
REFRESH : G_0000_RA_BWKEY, G_0000_RA_WERKS, G_0000_RA_BUKRS.
CLEAR : G_0000_RA_BWKEY, G_0000_RA_WERKS, G_0000_RA_BUKRS.
DESCRIBE TABLE BUKRS LINES G_F_CNT_LINES_BUKRS.
DESCRIBE TABLE WERKS LINES G_F_CNT_LINES_WERKS.
IF G_F_CNT_LINES_BUKRS > 0 OR
G_F_CNT_LINES_WERKS > 0.
fill range tables for the CREATION OF TABLE G_T_ORGAN
MOVE : WERKS[] TO G_0000_RA_WERKS[],
BUKRS[] TO G_0000_RA_BUKRS[].
PERFORM F0000_CREATE_TABLE_G_T_ORGAN
USING C_ERROR.
ENDIF.
save the parameters of this run "n547170
PERFORM ESDUS_SAVE_PARAMETERS. "n547170
"n599218
AT SELECTION-SCREEN OUTPUT "n599218
"n599218
"n599218
AT SELECTION-SCREEN OUTPUT. "n599218
"n599218
IF G_FLAG_INITIALIZATION IS INITIAL. "n599218
the process time INITIALIZATION was not done, so "n599218
carry out the functions here "n599218
MOVE 'X' TO G_FLAG_INITIALIZATION. "n599218
"n599218
PERFORM INITIALISIERUNG. "n599218
"n599218
get the parameters from the last run "n599218
PERFORM ESDUS_GET_PARAMETERS. "n599218
ENDIF. "n599218
"n599218
how to handle the 7 paramaters for the scope of list ? "n599218
LOOP AT SCREEN. "n599218
modify the selection screen "n599218
CASE SCREEN-GROUP1. "n599218
WHEN 'LIU'. "n599218
IF G_FLAG_STATUS_LIU = C_SHOW. "n599218
SCREEN-ACTIVE = '1'. "show parameters "n599218
ELSE. "n599218
SCREEN-ACTIVE = '0'. "Hide parameters "n599218
ENDIF. "n599218
"n599218
MODIFY SCREEN. "n599218
ENDCASE. "n599218
ENDLOOP. "n599218
"n599218
adapt the icon on the pushbutton depending on the status "n599218
CASE G_FLAG_STATUS_LIU. "n599218
WHEN C_HIDE. "n599218
MOVE TEXT-081 TO PB_LIU. "@0EQ@ Scope ... "n599218
WHEN C_SHOW. "n599218
MOVE TEXT-082 TO PB_LIU. "@0HQ@ Scope ... "n599218
WHEN OTHERS. "n599218
ENDCASE. "n599218
"n599218
"n599218
START-OF-SELECTION
START-OF-SELECTION.
*SET PF-STATUS 'TEST'.
create the title line
If no date is given at all, the range is set to the maximum
extend (1.1.0000 - 31.12.9999).
If only datum-low is set, it is interpreted as the day for
which the analysis is wanted --> datum-high is filled up.
IF DATUM-LOW IS INITIAL.
DATUM-LOW = '00000101'.
IF DATUM-HIGH IS INITIAL.
DATUM-HIGH = '99991231'.
ENDIF.
ELSE.
IF DATUM-HIGH IS INITIAL.
DATUM-HIGH = DATUM-LOW.
ENDIF.
ENDIF.
MOVE: DATUM-LOW(4) TO JAHRLOW,
DATUM-LOW+4(2) TO MONATLOW,
DATUM-LOW+6(2) TO TAGLOW,
DATUM-HIGH(4) TO JAHRHIGH,
DATUM-HIGH+4(2) TO MONATHIGH,
DATUM-HIGH+6(2) TO TAGHIGH.
SET TITLEBAR 'MAN'
WITH TAGLOW MONATLOW JAHRLOW TAGHIGH MONATHIGH JAHRHIGH.
create the headlines using the titelbar "n599218
PERFORM CREATE_HEADLINE. "n599218
calculate the offsets for the list header
PERFORM CALCULATE_OFFSETS.
for the representation of tied empties "n547170
PERFORM F0700_PREPARE_TIED_EMPTIES. "n547170
create table g_t_mseg_fields with the names of all
wanted fields from MSEG and MKPF
PERFORM F0300_GET_FIELDS.
set a break-point : is IS-OIL active ? "n599218 A
"n599218 A
check whether this is a IS-OIL system "n599218 A
PERFORM CHECK_IS_OIL_SYSTEM. "n599218 A
"n599218 A
IF G_FLAG_IS_OIL_ACTIVE = 'X'. "IS-OIL ? "n599218 A
the 2 IS-OIL specific data fields will be inserted into "n599218 A
working table G_T_MSEG_FIELDS. Then these fields will "n599218 A
transported from database table MSEG, too "n599218 A
APPEND 'MSEG~OIGLCALC' TO G_T_MSEG_FIELDS. "n599218 A
APPEND 'MSEG~OIGLSKU' TO G_T_MSEG_FIELDS. "n599218 A
ENDIF. "n599218 A
create the ALV fieldcatalog for the main list always
MOVE 'G_T_BELEGE' TO G_F_TABNAME.
PERFORM F0400_CREATE_FIELDCAT.
do not print the ALV-statistics and selection criteria
CLEAR G_S_PRINT.
G_S_PRINT-NO_PRINT_SELINFOS = 'X'.
G_S_PRINT-NO_PRINT_LISTINFOS = 'X'."
create the range table for the storage location
PERFORM F0600_CREATE_RANGE_LGORT.
- show the current activity and the progress "n599218
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR' "n599218
EXPORTING "n599218
TEXT = TEXT-063. "Reading current stocks "n599218
get the stock tables
PERFORM AKTUELLE_BESTAENDE.
PERFORM TABELLEN_LESEN.
- show the current activity and the progress "n599218
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR' "n599218
EXPORTING "n599218
TEXT = TEXT-064. "Reading MM documents "n599218
PERFORM F1000_SELECT_MSEG_MKPF.
PERFORM BELEGSELEKTION.
END-OF-SELECTION
END-OF-SELECTION.
results of all the autority checks
PERFORM F9100_AUTH_PLANT_RESULT.
- show the current activity and the progress "n599218
IF BWBST = 'X'. "n599218
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR' "n599218
EXPORTING "n599218
TEXT = TEXT-066. "Calculating Stocks and Values "n599218
ELSE. "n599218
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR' "n599218
EXPORTING "n599218
TEXT = TEXT-067. "Calculating Stocks "n599218
ENDIF. "n599218
PERFORM SUMMEN_BILDEN.
PERFORM BESTAENDE_BERECHNEN.
PERFORM LISTUMFANG.
- show the current activity and the progress "n599218
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR' "n599218
EXPORTING "n599218
TEXT = TEXT-065. "Preparing list output "n599218
stop if table bestand is empty
LOOP AT BESTAND.
SELECT SINGLE MATKL FROM MARA INTO CORRESPONDING FIELDS OF BESTAND
WHERE
MATNR = BESTAND-MATNR.
MODIFY BESTAND INDEX SY-TABIX.
ENDLOOP.
DESCRIBE TABLE BESTAND LINES G_F_CNT_LINES.
IF G_F_CNT_LINES IS INITIAL.
Keinen Eintrag zu den Suchbegriffen gefunden/selektiert
MESSAGE S083.
perform anforderungsbild.
ELSE.
process log function if the use is a tax auditor "n555246
and the database selection was successful "n555246
IF G_FLAG_TPCUSER = '1'. "n555246
PERFORM TPC_WRITE_LOG. "n555246
ENDIF. "n555246
PERFORM FELDGRUPPEN_AUFBAUEN.
sort table with header data per material
IF BWBST IS INITIAL.
SORT BESTAND BY MATNR WERKS CHARG.
ELSE.
SORT BESTAND BY MATNR BWKEY.
ENDIF.
which function does the user want ?
IF XSUM = 'X'.
hierseq. alv with sums
PERFORM CREATE_TABLE_TOTALS_HQ.
PERFORM CREATE_FIELDCAT_TOTALS_HQ.
PERFORM ALV_HIERSEQ_LIST_TOTALS.
ENDIF.
IF FLAG NE 'X'.
IF PA_SUMFL = 'X'.
elseif pa_sumfl = 'X'.
show the sums only in a flat ALV
PERFORM CREATE_TABLE_TOTALS_FLAT.
PERFORM CREATE_FIELDCAT_TOTALS_FLAT.
PERFORM ALV_FLAT_LIST_SUMS_ONLY.
ELSE.
display the full list using the APPEND ALV
PERFORM BESTAENDE_AUSGEBEN.
ENDIF.
ENDIF.
FLAG = ' '.
ENDIF.
CLEAR: G_T_MSEG_LEAN, G_T_BSIM_LEAN, BESTAND. "n443935
*& PF_STATUS_SET_TOTALS
FORM PF_STATUS_SET_TOTALS "#EC CALLED
USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'STANDARD' EXCLUDING EXTAB.
ENDFORM. "PF_STATUS_SET_TOTALS
user_parameters_save
FORM USER_PARAMETERS_SAVE.
GET PARAMETER ID 'BUK' FIELD G_SAVE_PARAMS-BUKRS.
GET PARAMETER ID 'WRK' FIELD G_SAVE_PARAMS-WERKS.
GET PARAMETER ID 'MAT' FIELD G_SAVE_PARAMS-MATNR.
GET PARAMETER ID 'CHA' FIELD G_SAVE_PARAMS-CHARG.
GET PARAMETER ID 'BLN' FIELD G_SAVE_PARAMS-BELNR.
GET PARAMETER ID 'BUK' FIELD G_SAVE_PARAMS-BUKRS.
GET PARAMETER ID 'GJR' FIELD G_SAVE_PARAMS-GJAHR.
ENDFORM. "user_parameters_save
user_parameters_restore
FORM USER_PARAMETERS_RESTORE.
SET PARAMETER ID 'BUK' FIELD G_SAVE_PARAMS-BUKRS.
SET PARAMETER ID 'WRK' FIELD G_SAVE_PARAMS-WERKS.
SET PARAMETER ID 'MAT' FIELD G_SAVE_PARAMS-MATNR.
SET PARAMETER ID 'CHA' FIELD G_SAVE_PARAMS-CHARG.
GET PARAMETER ID 'BLN' FIELD G_SAVE_PARAMS-BELNR.
GET PARAMETER ID 'BUK' FIELD G_SAVE_PARAMS-BUKRS.
GET PARAMETER ID 'GJR' FIELD G_SAVE_PARAMS-GJAHR.
ENDFORM. "user_parameters_restore
*& USER_COMMAND_TOTALS
FORM USER_COMMAND_TOTALS "#EC CALLED
USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CLEAR G_S_BESTAND_KEY.
CASE R_UCOMM.
WHEN '&GRPT'.
SORT BESTAND BY BWKEY MATKL.
FLAG = 'X'.
PERFORM GRP_TOTAL(ZGRP_TOTAL) TABLES BESTAND.
IF FLAG = 'X'.
EXIT.
ENDIF.
WHEN '&STR'.
IF BWBST = 'X'.
IF FLAG = 'X'.
clear: LGBST,BWBST ,SBBST.
PERFORM GRP_TOTAL(ZGRP_TOTAL1) TABLES BESTAND.
SUBMIT ZRM07MLBD2 WITH LGBST = 'X'
WITH WERKS = '1000'
WITH BUKRS = '1001'
WITH XSUM = 'X'
WITH PA_WDZER = PA_WDZER
WITH PA_WDZEW = PA_WDZEW
WITH PA_WDWIZ = PA_WDWIZ
WITH PA_WDWUW = PA_WDWUW
WITH PA_WDWEW = PA_WDWEW
WITH PA_NDZER = PA_NDZER
WITH PA_NDSTO = PA_NDSTO
WITH LGORT IN LGORT
WITH DATUM IN DATUM
WITH MATNR IN MATNR VIA SELECTION-SCREEN
AND RETURN.
CLEAR: LGBST.
ELSE.
MESSAGE E345(0) WITH 'First see the grp total'.
ENDIF.
ELSE.
MESSAGE E345(0) WITH 'Stock type chosen was not valuated'.
ENDIF.
Quarter Ending----
WHEN '&QTRE'.
TYPES: BEGIN OF TY_MTART,
MATNR LIKE MARA-MATNR,
MTART LIKE MARA-MTART,
END OF TY_MTART.
DATA: L_REC_QTY TYPE P DECIMALS 3,
L_ISS_QTY TYPE P DECIMALS 3,
L_REC_AMT TYPE P DECIMALS 3,
L_ISS_AMT TYPE P DECIMALS 3,
L_OTHERS_QTY TYPE P DECIMALS 3,
L_SALE_QTY TYPE P DECIMALS 3,
L_SALE_AMT TYPE P DECIMALS 3,
L_OTHERS_AMT TYPE P DECIMALS 3.
DATA: IT_MAKT TYPE STANDARD TABLE OF MAKT WITH HEADER LINE,
IT_T023T TYPE STANDARD TABLE OF T023T WITH HEADER LINE,
IT_T134 TYPE STANDARD TABLE OF T134T WITH HEADER LINE.
DATA: IT_MTART TYPE STANDARD TABLE OF TY_MTART WITH HEADER LINE.Dear Experts,
Thanks all for the reply.
I have followed the OSS notes 194788
Only enter the selection criteria which are required for the selection of the stock management unit for which the opening stock balance and closing stock should be determined.
In MB5B I key in selection criteria which are :
material number : xxxxxx
company code : 1000
plant : 1500
batch : xxxxxx
special stock indicator : orders on hand
selection date : 01.08.2009 to current date
stock type :special stock
and the result comes out :
there is initial balance of 3000 kg on 01.08.2009 - INCORRECT ( our team never enter this initial balance but still came out )
therefore the stock of current date also WRONG
if the total stock is adjusted using stock take , the accounting journal will be created, and reduce the financial asset with the same amount of 3000 kg (WRONG EFFECT)
how to solve this issue without affecting the accounting journal ?
Thanks
Pauline -
Back Date Storage location Stock / Subcontractor Stock
Dear SAP Guru (s)
Please confirm can we get back date stock at storage location with value and quantity. Also tell me how can we take one subcontractor stock at any particular date.
We are using MB5B, but it is giving only quantity at storage location level and value at plant level.
Full points if problem solved.
Regards
IshuExecute MB5B with special stock and O for special stock indicator, and then double click the material number, you can get all the material document NO.
-
Stock of a material as on given date
Hi all,
Is there any function module or any BAPI to calculate the opening and closing stock of a material as on the given date, based on which a customizing report is to be developed.. There was a Transaction MB5B to know the as on date stock, but it's taking longer time to use it in customizing report.Please let me know if any BAPI or any F.module is there to find the stock of a material as on given date.
Thanks in advance.
Edited by: Jaya on Apr 23, 2009 9:15 AMHi,
Try to develop a report using the logic of MB5B report and minimize the selection criteria
Regards,
Vikas -
Logic to build report to get the stock on a particular date
Dear Guru's,
We are trying to build a report for getting the stock on a particular date. It is not possible to copy MB5B that option is ruled out. We have also tried to get the data from MBEWH but that is also not helping as the table is not updated for all the periods.
Please advice
Thanks,
SamDear Sameer,
You can copy MB5B report and can modify as per your reuirement.
If you want get stock a paticular date.It is hard to get, why because you have to fetch all the Material documents
and you have to use MBEW table to get the current date stock and you have to do add/subtract from calculated stock.
Due to this there will performance issues also.
So try to copy MB5B and change as per your requirement.
regards
Subhash -
Plant Stock details for a given date
At present we are using MB52 for latest stock position of a plant. Is there any code for getting stock details for earlier date.
As we are facing lot of problems while audits....Hi
Please check the following link
Re: No stock showing in Inventory on date stock report
Cheers
Chandra -
Question regarding a method of stocking data
I know this thread already is in the "New to Java Technology" Forum, although I said the topic was closed there so I could open it back here.. I realized it would be more fitting here and it would probably get more replies...
I am working with a friend on a Client for Ultima Online and we have to stock data concerning the various objects and characters in the same sector as the Client. We have 3 ideas of what the best method could be, but we have no clue which method would be the most performant (concerning both speed and memory), or if there is a better method to do so.
Here's a description of the methods we thought about:
Method #1
Create many class files for each type of object, having the various related variables in their respective classes...
Exemple: A principal class called DataObject which holds the data common to all objects/characters. Classes which extends DataObject such as DataMobile (for the Characters) and DataItem (for the Items) in which the data specific to characters and items is stocked. And also various classes for the various types of objects such as Containers which will extend DataItem...
Method #2
Create a single class file which would hold an Array containing the various variables and of which the size would be the maximum amount of parameters possible. The array would work in relation with a byte which would hold the type of data stocked into the Array, this way we could know the structure of data and retrieve this data where it is in the Array...
M�thod #3 <= This one was the first idea and we know it is the worse one.. Telling you about it though
Create a single class file which would hold all the possible variables. These variables would only be used when necessary.
M�thod #4
Create a single class file which would extend java.util.Hashtable. The parameters would be stocked this way: The Key mapped to the value would be the type of parameter (represented by a Byte (not byte)) (type of parameter such as Serial, Name, Strenght, Dexterity, etc...). And the value would be stocked as a String, Integer, Short or Byte according to the case (once again, it isn't primitives, it is the classes from java.lang.*).
Thanks in advance for the suggestions :)This is not an advanced language topic. This is a beginner question, I would be very surprised if you got an answer in this forum.
-
Updating Master Stock Data Tab via DTW
Hi All
Im having problems updating Item Master Data Stock Tab , I want to update the warehouses on the Sales Items.
Any suggestions wich templates I must use and what format.
ThanksWhat do you want to update on the Inventory Tab
Do you want to Add more warehouses?
OR
Do you want to import inventory quantities?
Suda -
Logic at reporting level to compare two dates .
Dear Friends,
I have a scenario here , where i have a counter keyfigure in my DSO which has constant value 1 . there is two dates : Stock issue date & stock receipt date . At the reporting level , in selection screen there is an input on stock receipt date . Now i want to show key figure counter for which stock issue date lies between the stock receipt date which the user enters .
Kindly suggest on this matter .
Thanks & regards,
Ashutosh Singh1. Create a customer exit variable on Stock issue date. Pass on the value the user enters through exit to this variable.
2. Create a New formula with the counter keyfigure and restrict it based on the customr exit variable.
This will work correctly if Stock issue date and stock receipt date are not displayed in the report.
If it is displayed, then if the stock issue date lies between the stock receipt date it will have the value as 1 else 0.
Hope this helps.
rgds, Ghuru
Maybe you are looking for
-
Question on folder and document order
you used to be able to have a folder's contents changeable (in a list view). there used to be an option to arrange the folders first and then order the documents lower in the list rather than have all mixed up. is this feature gone?
-
Most of my photos are downloading from iphone5 as AAE files instead of jpeg
Most of my photos are downloading from iphone5 as AAE files instead of jpeg
-
Oracle Database and SQLData Interface
HI, I am facing a typical problem while using the SQLData Type. Its that. I have a table in db with a column numeric(2). and a UDT with the same..as above.. To pass the data from Java to Oracle. I am using. WriteSQL method of the SQLData Interface an
-
How do i contact itunes about app that don't do as they say
I bought an App (phone tracker) the only tracker app that works but it does not how do i contact Apple ANY Help Would Be Good
-
So this used to be a lot easier, but has gotten much harder to set up mail services, and get them to work. Not to mention that I'm in over my head.. So I can send mail thru the server from inside the office where the server is located, but not from o