As set up a certain number of users per connection handled by a WLC AP

HELLO community need an access point configured in the user minimum because I was looking and some had up to 49 LAP connections at the same time. I have a WLC 4402VERSION 7.0.98

You can't set a max user on a given AP unless you are running 7.2. The 4400 can't do that. Also its up to the client to decide what ap it will try to associate to. So depending in your ap locations and density of user and devices, all that can factor into why you see more clients on a AP and not on others.
Thanks,
Scott Fella
Sent from my iPhone

Similar Messages

  • Estimating number of users per instance

    hi gurus,
    This is a simple but critical question for me. How to estimate number of users per instance.
    example if database size is 1.2 terrabytes then how many users can we have? and how can we know the num of users for a exixting instance?
    Reddy

    Hi Reddy,
    Basically it is sizing question, and it depends on the hardware you have, the performance level you expect, and how well the system is tuned...
    Transaction ST07 shows how many users are currently on the system.
    Thank you,
    Victor

  • Maximum number of users Per Conference on monthly reports

    Can anyone has SQl query to fetch the maximum number of users per conference in Lync 2010 on monthly basis .
    in monitoring report this report is not coming so please give some workaround .
    Ashwani Thapa

    Have you seen this? http://blogs.technet.com/b/rischwen/archive/2014/01/17/per-user-conference-joins-grouped-by-uritype-sql-query.aspx
    If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
    Georg Thomas | Lync MVP
    Blog www.lynced.com.au | Twitter
    @georgathomas
    Lync Edge Port Check (Beta)
    This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Maximum number of users per Front End, assuming no AV

    I know that MS recommends 80,000 user limit per pool, and 6000 per Front End server, but that's certainly going to be assuming you are using the Front End services to some degree.
    A/V, I'm certain, is a fair overhead. Is there any kind of idea what the user limit per Front End server is if we assume the Front End is *only* doing IM and Presence?

    Using the capacity planner at a server built out with full specs, it's still suggesting 6600.  Without Mobility, 7200.
    Microsoft doesn't publish more than that so the rest is an at your own risk.  If you have enough users that it would be a concern, I'd just stick within the supported models.  You could start low and scale up by adding a front end or start
    high by removing a front end.
    http://www.microsoft.com/en-us/download/details.aspx?id=36828
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications

  • Number of users per room limit = 5000

    Hello,
    Regarding the 5000 users limit per room in LCCS:
    Is it an automatic limitation, or is there a way to over pass this limit?
    And why do you apply this limit?
    In a previous discussion, i was answered: "ideally if you want to build a really scalable app, you should distribute connections in multiple rooms"
    But if i have multiple chat rooms, the user will have to endure the connection time (not so short) every time he changes chat room. When i use a single LCCS room for all my chat discussions, i can limit to only one connection time for the whole App, which is much better user experience.
    And if i need a global chat room available for all logged in users?
    Moreover, i also use the global room connection between all users to keep some common informations updated live, especially for example to keep the online users, and the online state of chat rooms hosts. How can i do differently without connecting every  user at same time?
    If i can't get over this 5000 limitation, what solution Adobe has to offer, to get the great LCCS features, whitout limitations? A FMS server? but i'll have to recreate all LCCS services myself?
    To be clear: I need a scalable realtime service between all users of my app (not only a restricted chat room at a time). How can i do?
    Thanks,
    Regards,
    Seb

    Hello,
    Thanks for the detailed answer.
    I should read more about those customizable LCCS contracts, but are those contracts still rulled by the "you pay what you use" basis?
    And about the servers. You say the FMS servers are not unlimited. But is the LCCS service not based on cloud infrastructure?
    I thought cloud computing, was able to create virtually unlimited servers sizes, which would be perfect for the scalability of FMS heavy uses.
    Am i wrong about cloud computing?
    is LCCS not totally based on cloud instratucture?
    can i get over those limitations if i use my own FMS server on Amazon EC2 recently announced? (or another Adobe product?) but in this case, ill have to create my own LCCS implementation, from scratch, which is quite some work to do
    I am a bit disappointed from those limitations (even over 5000) because i love the LCCS business model and powerfull fonctionnalities.
    It is so great to say: "you pay only when you have success" (because with a good business model of a web project earnings growth along with success), and you can have a success from 2 users to potentially millions without worries about technical background and its price.
    Thanks,
    Regards,
    Seb

  • Expanding Creative Cloud number of users?

    My company already have Creative Cloud  set up for maximum number of users. However we need it for two more employees. Is there a way to pay to expand the amount of users we can give access to or would we have to buy another full price adobe creative cloud? Thanks a million!

    This is an open forum... I think you need Sales... by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • Remote Desktop Connection attempted with 2 users already connected no longer gets dialog showing who is connected and option to force user off

    On Windows 2008 Server R2, when the maximum number of users are connected via Remote Desktop (2) and another user attempts to connect via Remote Desktop, the user is prompted with a login dialog. Upon login, a dialog is shown with the User Id's of the
    users who are connected, their current state (active or idle for x minutes) and it gives you the option to request access from a user or to force a user off. Recently our server stopped displaying this message and now only gives an error message that it cannot
    connect. It does not show the login dialog, just an immediate connection error message. So now we don't know who is logged into the server. This presents a problem with many users who need to deploy software or manage server resources. What setting could have
    changed that would stop displaying the login and the current users dialog? Thanks!

    i can't seem to reproduce this, I played around with my server's NLA settings, looked at RDS GPOs, the options in the RDP listener, checked the user account in AD, just can't see what would be blocking this
    would it make a difference if one of the RDP spots is occupying the server's console or not?
    are the users trying to come in when the two sessions are already used up using the /admin or /console switch?
    in the meantime, you can try using tsadmin.msc to kick people off
    you may also want to try testing this with various different OS and RDP client versions to see if that's the issue. win7 with RDP 8.1 client doesn't seem to have any problems for me

  • How many users are connected ?

    Hi
    what is the metric that indicates the number of users actually connected to my OAS ?
    I think it's connection.active from .../Apache/ entries but i'm not sure.
    Regards
    Den

    Hi
    Finally my choice is to select the connection.active and request.avg only for the ohs server and compare it on time.
    Result (after text corrections) is
    date;time;connection.active;request.avg
    08/22/07;19:10:03;45925;226
    08/22/07;19:20:03;45799;226
    08/22/07;19:30:03;45674;226
    08/22/07;19:40:03;45550;226
    08/22/07;19:50:03;45427;226
    08/23/07;07:00:04;46210;3
    08/23/07;07:10:03;46228;8
    is it a good way to monitoring oas activity ?
    Regards
    Den

  • Thread number per connection crash 4.16

    We are using a program in a loop, we add 500 entry in 2 minutes. If the
    thread number per connection is set to 5 or 10, the Netscape Directory
    Server 4.16 got disorderly shutdown and dump a core. If we set this as 1,
    the server works fine.
    Could you please tell me what is the problem? Is this version not reliable?
    Thanks,
    Peter

    Peter Pan wrote:
    We are using a program in a loop, we add 500 entry in 2 minutes. If the
    thread number per connection is set to 5 or 10, the Netscape Directory
    Server 4.16 got disorderly shutdown and dump a core. If we set this as 1,
    the server works fine.
    Could you please tell me what is the problem? Is this version not reliable?What does it say in your error log? Is the number of threads per connection times the number of connections greater than the
    threadnumber? Are you sure you have tuned your kernel parameters to allow a large number of threads per process and per kernel?
    >
    >
    Thanks,
    Peter

  • Logoff Portal users beyond a certain number

    Dear All,
    We are interested to implement a solution wherein if the number of users increase to a particular number say 5000 in portal, they are automatically logged off. I heard that this can be done by customizing the header module file com.sap.navigation.masthead. par. Can someone help in this regard.
    Please note that we have already tried to restrict users by defining 300 max. users per server node as well as from the load balancer but still the portal is not able to take the load.
    Thanks
    Ankur

    Hi Ankur,
    But at the same time a user may have multiple sessions running on a server node.
    Regards,
    Biroj...

  • Word Count, but only words over certain number of letter...?

    Hi,
    Does anyone know of a way to do a word count, but only count the words with a certain number of letters. For example all words with 4 letters or more?
    Thanks

    I never guessed that I will read such a question but why not ?
    --(SCRIPT word4Count.app]
    --==========
    Enregistrer le script en tant qu'Application ou Progiciel : word4count.app
    déplacer l'application créée dans le dossier
    <VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Pages:
    Il vous faudra peut-être créer le dossier Pages et même le dossier Applications.
    menu Scripts > Pages > word4count
    Le script affiche (ou insère à l'emplacement du curseur )
    le nombre de mots de la couche texte et
    le nombre de mots des blocs texte
    dont la longueur est supérieure à la valeur définie par la property limite.
    --=====
    L'aide du Finder explique:
    L'Utilitaire AppleScript permet d'activer le Menu des scripts :
    Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
    Cochez la case "Afficher le menu des scripts dans la barre de menus".
    --=====
    Grace au programme gratuit ThisService, il est possible d'encapsuler ce script dans un service.
    Télécharger ThisService depuis:
    http://wafflesoftware.net/thisservice/
    Lors de la création du service, cliquer le bouton "Produce output".
    Il est possible d'associer un raccourci clavier au service.
    --==========
    Copy the script in the clipboard
    Paste in a blank window of Script Editor
    Save it as an Application or an Application Bundle
    Move the newly created application into the folder:
    <startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Pages:
    Now, enter your Pages document.
    Click where you want.
    Go to
    menu Scripts > Pages > word4count
    The script will count the words whose length is higher than the value stored in the property limite.
    The wordcount will be pasted at the insertion point
    --=====
    The Finder's Help explains:
    To make the Script menu appear:
    Open the AppleScript utility located in Applications/AppleScript.
    Select the "Show Script Menu in menu bar" checkbox.
    --=====
    Thanks to the free program ThisService, we may encapsulate this script in a Service.
    Download ThisService from
    http://wafflesoftware.net/thisservice/
    When creating the service click the button "Produce output"
    We may link the service to a shortcut.
    --==========
    Yvan KOENIG
    19 février 2009
    --=====
    property limite : 4
    property affiche : true
    --=====
    property theApp : "Pages"
    property ws : {}
    --=====
    on process()
    set rezult to my commun()
    tell application "System Events"
    activate
    display dialog rezult
    end tell
    return ""
    end process
    --=====
    on commun()
    local liste1, liste2, ng, c1, c2
    --set my ws to {}
    tell application "Pages" to tell document 1
    set liste1 to words of body text
    set liste2 to {}
    set ng to count of graphic
    repeat with i from 1 to ng
    tell graphic i
    try
    copy items of (get words of object text) to end of liste2
    end try
    end tell -- graphic i
    end repeat
    (* Working this way we are counting the words as they are defined by Pages *)
    end tell -- document 1 of Pages
    if liste1 is not {} then
    set my ws to liste1
    set c1 to my compte4()
    else
    set c1 to 0
    end if
    if liste2 is not {} then
    set my ws to liste2
    set c2 to my compte4()
    else
    set c2 to 0
    end if
    set my ws to {}
    if my parlefrancais() then
    return "Nombre de mots dont la longueur dépasse " & limite & return & "dans la couche texte : " & c1 & return & "dans des blocs : " & c2
    else
    return "Count of words whose length is greater than " & limite & return & "in text layer : " & c1 & return & "in text blocks : " & c2
    end if
    end commun
    --=====
    on compte4()
    local wc, w
    set wc to 0
    repeat with w in my ws
    if length of (w as text) > limite then set wc to wc + 1
    end repeat
    return wc
    end compte4
    --=====
    on parlefrancais()
    local z
    try
    tell application theApp to set z to localized string "Cancel"
    on error
    set z to "Cancel"
    end try
    return (z = "Annuler")
    end parlefrancais
    --=====
    on run
    set rezult to my commun()
    if affiche then (*
    display the results *)
    tell application theApp to display dialog rezult
    else (*
    insert the results in the text body *)
    tell application "Pages" to tell document 1 to set selection to rezult
    end if
    end run
    --=====
    --[/SCRIPT]
    Yvan KOENIG (from FRANCE jeudi 19 février 2009 15:45:56)

  • How to find the number of users  connected to database from OS level(Linux)

    Hi All,
    Could anyone know , how to find the number of users connected to database without connecting with sql*plus
    is there any command to find it?
    example we have 10 databases in one server, how to find the number of users connected to particular database without connecting to database(v$session)?
    oracle version:- 10g,11g
    Operating System:- OEL4/OEL5/AIX/Solaris
    any help will be appreciated.
    Thanks in advance.
    Thank you.
    Regards,
    Rajesh.

    Excellent.
    Tested, works as long as you set the ORACLE_SID first ( to change databases )
    ps -ef | grep $ORACLE_SID | grep "LOCAL=NO" | awk '{print $2}' | wc -l
    Thanks!
    select OSUSER
        from V$SESSION
    where AUDSID = SYS_CONTEXT('userenv','sessionid')
        and rownum=1;Best Regards
    mseberg

  • Use hardware to generate a certain number of pulses using PXI-5652

    Is it possible to generate a certain number of periods (turn on the output for a predetermined amount of time using hardware with micro-second resolution) using the PXI-5652.

    Hello Matt,
    If you had a Vector Signal Generator, this would be more controllable using something similar to this forum.
    Otherwise, the only way to control time on the 565x would be to use OOK modulation scheme. This will allow you to turn on the signal for a little time On and Off.
    There is a shipped example called "565x Digital Modulation.vi" (on versions 1.3 and later of the RFSG driver) that can perform this task. Basically it uses the function named "niRFSG Configure Digital Modulation User Defined Waveform.vi" to write the user bit sequence and with property nodes you will configure the OOK scheme and the symbol rate (refer to specifications of your card for the possible values).
    Hope this helps,
    Gerardo O.
    RF Systems Engineering
    National Instruments

  • How to set the maximum length that a user can enter in Msgstyledtextinput

    Hi Everyone,
    I'm currently using EBS 11.5.1 and 10.2g DB
    Is there a way that I can set the maximum length that a user can input?
    I changed the Maximum Length to lower number (from 150 to 100) but I get the following error.
    Developer Mode Exception encountered in item SaveLocation
    Error: The item SaveLocation has a maximum length (100)
             which is not equal to that of the corresponding VO attribute
           , SaveLocation length (150).
    Action: Make sure they are equal in size. There must be other way to set that value
    Thanks,
    Elmer

    You have to set the maximum length of column to 150 to avoid this error.
    You can set the same in Jdev.
    Thanks
    --Anil                                                                                                                                                                                                                                                       

  • How to display a certain number of channels...

    Hi!
    I am using LabVIEW 8.5 and I am trying to display a certain number of channels using multiple channels ...
    I can display them in a graph, but I am displaying the 16 analog input channels
    that NI 6024E have and I need to display only the channels that have something
    connected to them (I do not know which channel will have something connected to
    it). If they have a signal (temperature), I will like to display that channel/s in a graph and save that  channel/s in a txt file. If not
    I do not want to show or save the channel/s.
    How can I do that using DQA Assistance?
    I am able to do all this using one channel, I can display in
    a graph, I can save it in a txt file, but I am not able to do it for n number
    of active channels only. Any advice or suggestion will be appreciated.
    Sincerely,
    Julieta.
    Solved!
    Go to Solution.

    Hi,
    I am trying to give the user the opportunity of selecting how
    many channels he/she want to connect to the board… Now I only have two channels and I know what
    those channels are, but I want to do something that allow the user to select
    the channels that he/she needs (maybe the 16 or maybe only 3 or 7). I saw that
    in older versions of Labview there exists in Analog Input a “AI MULT PT” that
    maybe could allow me to input there specific channel (I am using 8.5 version of LabView).
    I am doing this to detect the channels, but it is not even
    close of how it supposes to be, because the user can not select… I just want to
    display the channels the user select and calculate the mean only for those
    channels.
    Any suggestion advice will be appreciated…
    Sincerely,
    Julieta.
    P.D.: My English is not so good…
    Attachments:
    Temperature.PNG ‏15 KB

Maybe you are looking for