As soon as a plug my ipod in it says it needs version 10.5 or later what do I do
As soon as I plug in the ipod it has a pop up say that it needs a version 10.5 or later to run. What do I do?
Update to the latest version of iTunes using the Apple Software Update utility for windows or download the newest version from Apple's website and install it over the current version.
http://www.apple.com/itunes/download/
B-rock
Similar Messages
-
When I plug my Ipod in, it says that there was a malfunction in the USB...
When I plug my Ipod in, it says that there was a malfunction in the USB deivce, and when I go to look at the drivers, it says no drivers are installed, and when I try to install/update them, it says that there is no better match.
Not if you first do a sync and have iTunes make a backup. However, if your only copy of the iTunes data is in the Touch, then you need to first copy the data to a new iTunes Library using third-party software such as Phone To Mac.
-
when i plug my ipod in it says ipod cant be read cuz the apple mobile device is not started.And i went to services and apple mobile device properties and start stops in the middle.and its on automatic.and there isnt a stop button.when i click start it says the apple mobile device services stopped in the middle then stopped.it said some services stop in the middle if not used by other services.and i just updated itunes before all a this and ever since ive had errors.
Have you looked at this article:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
When I plug my ipod in it says 'this ipod cannot be used because the Apple Mobile Service is not started" What should I do?
go here it helped mine
http://support.apple.com/kb/TS1567 -
How do i use an iphone 3g as ipod when it says i need sim card?
my friend has an old at&t iphone 3g which is just sitting there so she decided to use it as an ipod but it says it needs a sim card. is there any way to bypass that so she can use it as an ipod??
Using an iPhone without a wireless service plan
-
I just got an iPod 4th generation and Im trying to sync my iTunes songs and books from my dell laptop on to my iPod but it says I need iTunes 10.6.3. So I tryed to download it on the apple website but it keeps saying that there is an error. I have already tryed uninstalling all Apple Inc. programs on my laptop then trying to install iTunes again but that has had no success what so ever. I have started to get very frusterated with this . Hopefully someone can help. I would really appreciate it. Any suggestion?
So I tryed to download it on the apple website but it keeps saying that there is an error.
What does the error message say? (Precise text, please.) -
itunes is not recognising my ipod!! says i need to install 64 bit version, it is 64 bit version though!!
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
My iPod is disabled, but not because I forgot the password. It says I need to connect with iTunes, but when I try it says I need to enter the password. What do I do?
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
i tryed to add apps to my ipod but it says it need the newst softwear, i tryed to add apps to my ipod but it says it need the newst softwear.
how can i get the newst softwear for a 1 gen ipodYour 1st gen iPod Touch will not run iOS 4. It can only run iOS 3.1.3. This means that some apps will not run on your iPod Touch.
http://support.apple.com/kb/HT2052 -
Today was my ipod disabled. it says I need to connect to iTunes, but when I connect it brings up an error message that says I have to enter code but my problem is that I forgot the code!!!!
Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
HT4623 i wanna get an app on my ipod an it says i need ios 5.1
i wanna get an app on my ipod an it says i need ios 5.1
some apps need the latest software
which generation's ipod do you have? -
i bought a second hand ipod 5 and the original owner forgot the email and password and i can't restore the ipod and it says i need the original apple ID but i dont know it could anyone help me??
If you can access the device: Tap Settings -> General -> Reset -> Erase All Content and Settings.
If you can't do that then you need to Restore it as New:
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software.
You can also try using DFU mode:
Placing your device into recovery (DFU) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
until the red slider appears, then slide the slider. Wait for the device to turn off.
* If you cannot turn off the device using the slider, press and hold the
Sleep/Wake and Home buttons at the same time. When the device turns off,
release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
device. The device should turn on. Note: If you see the battery charge warning,
let the device charge for at least ten minutes to ensure that the battery has some
charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
how can i save me data stored on a non responding ipod classic and says you need to format before using it?
in another way : how can i save my date stored on my classic iPOD as a external hard .... when that msgs appears .... volume doesn't contain a recognized file system , make sure the file system is loaded .... then , you need to format ??? can anyone help ?It sounds like the iPod's storage has data corruption. You may be able to treat it like an external drive and use data recovery software on it, but it probably won't work because the system is telling you that the drive needs to be formatted before it is recognized.
If the problem is data corruption and there is no hardware-related problem on the iPod's hard drive, a Restore should fix the problem. But this will obviously erase the iPod's hard drive. -
I followed the steps detailed on the help page for resolving email issues with Hotmail (Live.com) did everything listed, followed all the steps, still can't send email, Ipod touch STILL says account information is incorrect (it's not) what now then???
Can you access the account on another device?
Have you tried when connected to another network?
Have you tried deleting the account from the iPod and reentering the settings since it is easy to make an error. -
when i turn on my ipod it tells me i need to connect to itunes i try connecting to itunes and it tells me i dont have the right driver so i try updating it and it says it is up to date how do i fix it?
Try here:
iOS: Device not recognized in iTunes for Windows
I would first remove and reinstall all the Apple software by:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Maybe you are looking for
-
Executed and failed alternatively while testing a bpel process
I have created a bpel process such that the response from the bpel is posted to a Queue. I have deployed the bpel and esb process successfully. While testing the bpel process,it is completely executed for the first time.(no error in esb and bpel cons
-
Photo sync leaving gallery on phone in a mess
Hi, I am trying to move some pictures to my Nokia 5230. I have downloaded and clean installed the latest Ovi-suite. I have connected the phone and chosen pc-suite data transfer mode. I then synced the photos between the PC and the phone. In Ovi-suite
-
I'm trying to install a cd application and I keep getting the message 'you do not have permission to use the application FSP OS X' Even after selecting always allow and entering my login details it still won't accept it. Help!!..
-
Importing file information to QT-files
Hi Could somebody save my time, please. I produce many differend kind of QT-movies from FCP project with Compressor in same session. I like to add some file information like Copyright, producer, owner, etc. (those which you can see in Command-I windo
-
Why does DEP keep closing photoshop cs6
why does DEP keep closing photoshop cs6