AS01 Asset Master - Problem with Cost Center in Time Intervals

Hello experts,
I need your help to solve this problem, in the tab Time-dependent - More Intervals - Overview of time intervals
When i add a new interval and change the Cost Center, the system modify all the previos intervals setting the last Costo Center to all, i dont know why the system do that, thanks.

Hi Gaetano,
check that the prerequisites which are explained in [Note 684659|https://service.sap.com/sap/support/notes/684659] are fulfilled.
I assume that you are on a release R/3 Enterprise or higher.
- KOSTL activated in ACSET
- cost element existing
- field status allows KOSTL in the account
- cost center maintained in asset master record
Regards,
Markus

Similar Messages

I've problem with Game Center . I can't sign in Game Center on my iPad . I tap on the Game Center icon but the page is blank. I tried go to setting, my Apple ID appear but the page keep on loading and nothing pop up. How to resolve this issue?

I've problem with Game Center . I can't sign in Game Center on my iPad . I tap on the Game Center icon but the page is blank. I tried go to setting, my Apple ID appear but the page keep on loading and nothing pop up. How to resolve this issue?

Hi, bamboo64.
Try closing all open applications in multitasking and power cycling the device. Once this is done test the results. If the issue persists, I have included a couple troubleshooting articles that I would recommend going through.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers,
Jason H.

Exchange Rate Difference in PO with cost center assignment

Hi All,
In case of exchange rate difference in a PO with a cost center assignment the system Do not post the difference in the exchange rate difference account (maintained under transaction type - KDM - in T-code OBYC). However if the PO is a normal material PO it posts the exchange rate difference to the exchange rate difference account.
I want the exchange rate difference to be posted to the exchange rate difference accout for PO's with cost center assigned as well.
I have searched for SAP notes and found that note # 980402 & 1102481 provides a solution for this issue - but it seems both the notes are valid for 4.6 and 6 release only. We are on ECC 5.0
I have also checked note # 1136145 for this and implemented in the system successfully without any luck.
Can some one please help me with a solution for this issue.
Thanks and regards,
Ankur

Even I have implemented this note in our 4.6C system for account assigned POs, but no luck. Please let me know if are successful.
Thanks
Neel

Master record for cost center/activity type

Hi all;
How create a master record between an cost center and activity type?
Thank you

Hi
You can create master data between cost center / activity type.
You can link the two by planning for activity qty the combination of a cost center / activity type in KP26. Then you do a detailed planning for costs for the cost center / activity type / cost element in KP06.
I hope it is clear..
Regards,
Suraj

Finance and Controlling report in combination with Cost center, GL account, Internal Order

Hi Members,
Finance and Controlling report in combination with Cost center, GL account, Internal Order.
Please provide any slandered report in all 3 dimension.
Thanks
Dileep Kumar

Search this query in FI Controlling forum am sure you will get useful results there.
This kind of reports related to Controlling are usually created using Report Writer tool.
In fact majority of reports in Controlling component is created using Report Writer only.

Problems with webcam center

Hi
I bought webcam instant yesterday,i downloaded the newest drivers for it...
But it doesn't work.
Everytime i start webcam center the camera turns off...
I tried it with msn messenger...but it worked perfectly...
HELP!!!!

...the version is .0.02.0729
just try google.....
but i'm still searching for the solution of the problem with webcam center!!!!

Problem with DAQmx and Real Time PCI-7041/6040E.

Problem with DAQmx and Real Time PCI-7041/6040E.
I have a problem with the Real Time card PCI-7041/6040E, I think it is properly installed because my software run with the traditional NI-DAQ. When I try to use the new DAQmx to acquire one signal, Labview doesn't see any device for de DAQ card 6040E.
Information, I work on Windows XP and LabView v7.0.0 (NIDAQ RT v7.0.0, NI-Serial RT v2.5.2, NI-VISA v3.0.1 and NI-Watchdog v2.0.0).
Could Labview RT run with new DAQmx ?
What can I do to use DAQmx with PCI-7041/6040E?
Thanks for your help !

Hello,
I refer to your posts because i am using the PCI 7041/6040E card as
well but without any success to make it work. The problem I have
already described in the following thread:
http://forums.ni.com/ni/board/message?board.id=170&message.id=120198
Would be nice if you had a look on it, maybe you can help me. BTW, the
thread starts with a problem of someone else, the difficulties I
encountered are to be found a little bit to the bottom of the thread's
page.
Thank you!
Dirk Völlger
Darmstadt
Message Edited by ratschnowski on 07-28-2005 07:14 AM

Problem with drill down in time dimension - OBIEE 11G

Hello There,
I have a problem with drill down in time dimension. The hierarchy for time dimension is " Fiscal Year---> Fiscal Quarter---> Month(Name)--->Date". When I select a Time dimension and click results its getting opened in a Pivot table view. The problem here is, when I click the "Total" its getting drilled down to Year ---> Quarter but when I click on "+ sign next to quarter" it should drill down to month for that particular quarter for that particular year but its drilling down to month for that particular quarter for all years.
Any suggestions are much appreciated.
Thanks,
Harry.

1.) Congrats for resurrecting a year-old thread.
2.) Your answer is here: "Check the level key of the quarter level...it should include both quarter and year columns. Since a specific quarter occurs every year, quarter column alone can't be used as the level key."

HT5361 Today, I experienced a problem with my mail. the time and date on each email received and sent is 18-06 and the date is 22nd July irrespective of the actual time

Today, I experienced a problem with my mail. the time and date on each email received and sent is 18.06 and date as 22nd July. Thank you John

Incorrect date or time displayed in various applications

Freight Costing - Problem of G/L account with Cost Center

Dear Gurus,
In VI02, I have the following u201CAccount Assignmentu201D message of error:
u201CG/L account 60900000 cannot be used (please correct)u201D
u201CComparison of the field selection strings from the G/L account 60900000 and the account assignment category K reveals that there is an incompatible combination of field selections for the field selection group 'Earmarked Funds'.u201D
Questions:
Bearing in mind that I am in the Shipment Cost cockpit, I need to mention that the system directly allocated me the following Account Assignment Category: u201CKu201D for u201CCost Centeru201D.
1- I could there either way create another Account Assignment Category for Shipping instead of Cost Center
2- The system tells me about an incompatible combination of field selection, how can I change that field selection to make it compatible? There are so many possibilities that I get bogged down in choosing the right combination.
I have been to OME9 and OB14 to try to maintain fields, however those fields have different values or names.
My aim here is to coordinate a G/L account group with a Cost Center for Freight Costing
Can anyone help?
Thanks
Chris

Dear Zafar,
If you desire you maintain two different cost centers for the two company and you need to have both of them posted on the same G/L account and Cost element, I would advice you to:
- create a Z table where by controlling area you define where the specific cost center need to get posted
- include this validation check in the exit for validation for controlling
- include this validation check in the exit for validation for finance
- include this validation check also in the sales order user exit
Standard SAP seems do not have direct link between cost centers & cost elements. For this reason ideal solution is to generate a table where you may define you needed structure.
E.g.: some ideas on the table you may create
Controlling area
Cost element from
Cost element to
Cost center from
Cost center to
I hope this suggestion may answer to your need.
Regards,
Viviana A.

Crm- Contracts problem with profit center!

HI All, I am facing a problem in profit center posting, when billing a contract (VF01, VF44) and MIGO
Contract Scenario,
I am Creating Contract In CRM and replicating it as a contract in ECC to performe Billing(VF01) and Revenue recog(Vf44) the contract created is replicating to ECC with Internal order as a real account assignment object on the contract , when we are billing / revenue recog the dummy profit center is getting populated inthe accounting entries , the senario is explained as below
I have replicated contract with 4 line items, with different profit centers (Say P1, P2, P3, P4 and assigned to same real internal order(IO1),as i am using single object controlling and controlling senario at the transaction level) to all the line items ,when ever the line item is Billed(Vf01) or the Revenue recognized on the Contract(Vf44) the Accounting Entries are getting populated with Dummy profit center as the AUFNR u2013 prctr is u201CDummyu201D
I there a way we change the profit center on the accounting document on billing and revenue recognition
Goods receipt:
I am Creating Contract In CRM and line item in the contract which is backlined with the princial will generate a PR in ECC with Account assignment cat "F" When ever a Po with u201CFu201D account assignment is created and GR is done on the Same , Dummy profit center is getting populated in the Accounting entries
I there a way we change the profit center on the accounting documents (derive the profit center from the Cost center _ prctr rather than the AUFNRu2013 PRCTR) and even though the Internal order is assigned to the line item
We are not using the Document Splitting Functionality, I am aware that when ever there is real cost object assignment, profit center will be populated from the cost object only
I require your help very badly , Please guide me .
Thanks

Hi,
Did you try using substitution rules for CRm processes ?

Issue with Cost center in PO and Work Order

Dear Expert,
I am facing an issue with respect to cost center in Purchase Order and Work Order. The PO is made against a work order. There are two cost center associated with the work order. One is updated under u201CAdditional datau201D field and other is at u201Clocationu201D . So the cost center in PO should essentially be the same one mentioned under u2018locationu2019 field of work order. So the issue here is that while creating PO, the cost center is picked from the u201Cadditional datau201D field of work order not from u2018locationu2019 field of WO.
Is there any exit available that needs to be implemented for overriding the cost center in PO or any other way of solving this problem?
Thanks in advance.
Thanks
Deba

Hi,
I guess that there is already some user exit or enhancement in place, since this doesn't sound like standard SAP (picking the cost data from additional data, or even having it there).
Mario

Screen Enhancement on T-Code AS01 (Asset Master)

Hi Experts,
I want to add a filed of Customer Number( KUNNR) on the Asset Master Screen ( t-code AS01)
I have done a lot of work....
I have used the Enhancement AIST0002 ..... also make the Subscreen....
In Short, now my field is Displaying on the Asset master Standard Screen. also displaying the F4 help against it...
*Problem:*
when i save the Data ... it does not save the data...
I also check the table ANLU. there is no record exist... (boz i did not write any Code)
Can i have to Write the Update Query for save the Record?
Note: i am first time making the Screen Enhancement.
Regards,
Rizwan

Dear George Serfiotis,
i have find the solution completely ... now, not only my Screen is displaying but also working properly..
http://binarycse.com/joomla/index.php/sap-abap/screen-exits
<<CUT AND PASTE OF ABOVE LINK DELETED>>
<<REQUEST FOR POINTS DELETED. It was your question anyway...>>
Rizwan
Edited by: Matt on Nov 18, 2008 3:08 PM

Fbl3n disply. g/l with cost center vise

hi
Tcode; FBL3N for one particular G/L a/c....cost center wise not comng
plz tell me where i have to assing cost center to that particular g/l a/c
urgent plz
regards

Hi,
For creation of cost elements, there are 3 methods
Method 1: Creating Cost Element after GL was created
Tcode: KA01
Set the controlling area (Extras> Set Controlling area)
1. Cost Element: Give the GL account number
Give Valididty period
Enter
Basic Data: Cost Element Category: 1 (Primary Cost)
Save
Method 2: Creation of Cost Element along with GLTocde: FS00
Select your GL account and go to 'Change' mode
Click Edit cost element
It gets automatically redirected to Tcode KA01
Cost Eleemnt Category : 1
Save
Method 3: Creation of Cost Element automaticallyIMG-controlling-cost element accounting-master data - cost elements-automatic creation of pri/sec cost elements
a. Make default settings - Metion Ch of Accounts, Give starting and edning GL, COst element category:1 - Save
b. Create batch input session - mention the controlling area, from, to, session name and batch i/p - execute and check the report - back
c. Execute batch input session (SM35) - select ur session - click process
To assign expenses to cost center
FS00
For ur GL, seelct the FSG as G004 & SAve
Regards,
Sridevi
* Pls. give points, if useful as a way to say thanks

Internal order for AUC with cost center - 'Please Select proper plant code'

Hi All,
User is getting error 'Please Select proper plant code', while inserting 'cost center' in field 'Responsible CCtr' for new Internal order which is for AUC.
In Devlopment server also when we try to create asset through internal order we get same error.
For your information this is new Plant, profit center and cost center for which we are trying to create internal order for AUC.
If we try to post without Cost centre entry is saved. But we want to add cost center.
Please help to resolve.

Hi,
If it is a custom message then please check whether any Validation or USer exit is maintained for the IO master data. If yes, then update the cost centre accordingly.
Regards
Sreekanth

AS01 Asset Master - Problem with Cost Center in Time Intervals

Similar Messages

Maybe you are looking for