AS01, setting the option "manage historically" ... where to put the form?

Hi all,
creating an asset (AS01), setting the option "manage historically", SAP gives me the message
"Asset class ATTREZZA is not yet assigned to a form"
Where could I assign any forms in customizing?
Thanks

Hi
Try SPRO - FA'g - Asset Accounting - Information System - Define or Assign Forms
Thank You,

Similar Messages

  • In the first itunes i had the option show dubbel parts but whit the newer one i cant find that option annymore, where is it?

    in the first itunes i had the option show dubbel parts but whit the newer one i cant find that option annymore, where is it?

    palkia wrote:
    in last 4 days, i been using the new ip4 to take important photos and creating new contact.my new ip4 never snyc to itunes
    There's your problem right there... ^
    Whatever you did prior to plugging it in and answering yes to start the restore is gone forever.

  • Where is in OS X Lion the option to turn on or off  the Magic Mouse scroll.

    I have not found anymore on OS X Lion the option to turn on or off  the vertical scroll of Magic Mouse. The problem is That I use Corel Draw with Parallels, and Corel Draw does not work with the scroll on, he gets mad. I always turn off the scroll option of Magic Mouse in OS X Leopaed before entering Windows XP. Now I had to put a conventional mouse and stop using the Magic Mouse because I dont find this option in the settings of the mouse preferences.
    Anyone know how to solve this problem?
    Many Thanks
    Marcelo Silveira

    1. Make sure software is up to date
    2. Make sure FaceTime is enabled; Settings>FaceTime
    3. Make sure Date and Time is correctly set; Settings>General>Date and Time>Set Automatically>On
    4. Make sure Push Notification is enabled
    5. Make sure phone number or email address is correct
    6. Restart device

  • Add the option for a close button on the Scattered setting .

    Add the option for a close button on the Scattered setting ... like you have with all the other options - needed for touch devices as the roll out is no use on an ipad or iphone etc etc....

    This was the original code I got:
    Main FLA: (on AS layer inside DropDownButton Movie Object)
    function removeF() {
    removeChild(myLoader);
    var myLoader:Loader=new Loader ();
    page1_mc.addEventListener(MouseEvent.CLICK, page1content);
    function page1content(myevent:MouseEvent):void {
    var myURL:URLRequest=new URLRequest("page1.swf");
    myLoader.load(myURL);
    addChild(myLoader);
    EXTERNAL FLA: (on main time line of this file)
    close_mc.addEventListener(MouseEvent.CLICK, closeMC);
    function closeMC(myevent:MouseEvent):void {
    MovieClip(parent.parent).removeF();
    Main.FLA
    myLoader=bigboreLoader (my new loader)
    page1_mc=btnbb2 (the button who event will call external swf)
    page1content = bigborecontent (name given to SWF being loaded???)
    myURL=bigboreRequest (my new URLrequest for bigbore)
    page1.swf=moduletemplate.swf (actual address of what I am loading)
    External.FLA
    close_mc=button that will close external swf
    closeMC=movie clip to close?

  • Can not see the option Execution with Data Change in the infoprovider?

    Hi team,
    i am using query designer 3.x, when i go into my bex brodcaster settings and schedule my report
    i can not see the option "Execution with Data Change in the infoprovider",
    i can only see 2 options
    Direct scheduling in background process
    create new scheduling
    periodic,
    is there any setting which i would be able to see the option "Execution with Data Change in the infoprovider"?
    kindly assist

    Hi Blusky ,
    check the below given link.
    http://help.sap.com/saphelp_nw04/Helpdata/EN/ec/0d0e405c538f5ce10000000a155106/frameset.htm
    Regards,
    Rohit Garg

  • I changed my iPhone lately but i can't restore my last backup since it keeps saying "itunes could not restore backup because the password was incorrect" but I don't know where to put the password to make it happen... Any suggestions?

    Hey guys,
    I just bought a new iPhone but i can't restore my backup files beacuse it keeps saying "itunes could not restore backup because the password was incorrect" but I really don't know where to put the password to restore it. I really have some files that are meaningful for me so I really need help. Any suggestions anyone?

    Select your iDevice in the iTunes.
    Choose the Summary screen (tab) and scroll to the bottom of the screen.
    Then un-select Encrypt iPhone backup.
    iTunes will then prompt you to “Enter the password to unlock your iPhone backup”, enter the password you set originally.

  • Where to put the commit in the FORALL BULK COLLECT LOOP

    Hi,
    Have the following LOOP code using FORALL and bulk collect, but didnt know where to put the
    'commit' :
    open f_viewed;
    LOOP
    fetch f_viewed bulk collect into f_viewed_rec LIMIT 2000;
    forall i in 1..f_viewed_rec.count
    insert into jwoodman.jw_job_history_112300
    values f_viewed_rec(i);
    --commit; [Can I put this 'commit' here? - Jenny]
    EXIT when f_viewed%NOTFOUND;
    END LOOP;
    commit;
    Thanks,
    - Jenny

    mc**** wrote:
    Bulk collect normally used with large data sets. If you have less dataset such as 1000-2000 records then you canot get such a performance improvent using bulk collect.(Please see oracle documents for this)
    When you update records Oracle acquire exclusive lock for that. So if you use commit inside the loop then it will process number of records defined by limit parameter at ones and then commit those changes.
    That will release all locks acquired by Oracle and also teh memory used to keep those uncommited transactions.
    If you use commit outside the loop,
    Just assume that you insert 100,000 records, all those records will store in oracle memory and it will affect all other users performance as well.
    Further more if you update 100,000 records then it will hold exclusive lock for all 100,000 records addtion to the usage of the oracle memory.
    I am using this for telco application which we process over 30 million complex records (one row has 234 columns).
    When we work with large data sets we do not depends with the oracle basic rollback function. because when you keep records without commit itb uses oracle memory and badly slowdown all other processes.Hi mc****,
    What a load of dangerous and inaccurate rubbish to be telling a new Oracle developer. Commit processing should be driven by the logical unit of a transaction. This should hold true whether that transaction involves a few rows or millions. If, and only if, the transaction is so large that it affects the size constraints of the database resources, in particular, rollback or redo space, then you can consider breaking that transaction up to smaller transactions.
    Why is frequent committing undesirable I hear you ask?
    First of all it is hugely wasteful of rollback or redo space. This is because while the database is capable of locking at a row level, redo is written at a block level, which means that if you update, delete or insert a million rows and commit after each individual statement, then that is a million blocks that need to go into redo. As many of these rows will be in the same block, if you instead do these as one transaction, then the same block in redo can be transacted upon, making the operation more efficient. True, locks will be held for longer, but if this is new data being done in batches then users will rarely be inconvenienced. If locking is a problem then I would suggest that you should be looking at how you are doing your processing.
    Secondly, committing brings into play one of the major serialization points in the database, log sync. When a transaction is committed, the log buffer needs to be written to disc. This occurs serially for multiple commits. Each commit has to wait until the commit before has completed. This becomes even more of a bottleneck if you are using Data Guard in SYNC mode, as the commit cycle does not complete until the remote log is notified as written.
    This then brings us two rules of thumb that will always lead a developer in the right direction.
    1. Commit as infrequently as possible, usually at the logical unit of a transaction
    2. When building transactions, first of all seek to do it using straight SQL (CTAS, insert select, update where etc). If this can't be easily achieved, then use PL/SQL bulk operations.
    Regards
    Andre

  • Architecture question...where to put the code

    Newbie here, so please be gentle and explicit (no detail is
    too much to give or insulting to me).
    I'm hoping one of you architecture/design gurus can help me
    with this. I am trying to use good principals of design and not
    have code scattered all over the place and also use OO as much as
    possible. Therefore I would appreciate very much some advice on
    best practices/good design for the following situation.
    On my main timeline I have a frame where I instantiate all my
    objects. These objects refer to movieClips and textFields etc. that
    are on a content frame on that timeline. I have all the
    instantiation code in a function called initialize() which I call
    from the content frame. All this works just fine. One of the
    objects on the content frame is a movieClip which I allow the user
    to go forward and backward in using some navigation controls.
    Again, the object that manages all that is instantiated on the main
    timeline in the initialize() function and works fine too. So here's
    my question. I would like to add some interactive objects on some
    of the frames of the movieClip I allow the user to navigate forward
    and backward in (lets call it NavClip) . For example on frame 1 I
    might have a button, on frame 2 and 3 nothing, on frame 4 maybe a
    clip I allow the user to drag around etc. So I thought I would add
    a layer to NavClip where I will have key frames and put the various
    interactive assets on the appropriate key frames. So now I don't
    know where to put the code that instantiates these objects (i.e.
    the objects that know how to deal with the events and such for each
    of these interactive assets). I tried putting the code on my main
    timeline, but realized that I can't address the interactive assets
    until the NavClip is on the frame that holds the particular asset.
    I'm trying not to sprinkle code all over the place, so what do I
    do? I thought I might be able to address the assets by just
    providing a name for the asset and not a reference to the asset
    itself, and then address the asset that way (i.e.
    NavClip["interactive_mc"] instead of NavClip.interactive_mc), but
    then I thought that's not good since I think there is no type
    checking when you use the NavClip["interactive_mc"] form.
    I hope I'm not being too dim a bulb on this and have missed
    something really obvious. Thanks in advance to anyone who can help
    me use a best practice.

    1. First of all, the code should be:
    var myDraggable:Draggable=new Draggable(myClip_mc);
    myDraggable.initDrag();
    Where initDrag() is defined in the Draggable class. When you
    start coding functions on the timeline... that's asking for
    problems.
    >>Do I wind up with another object each time this
    function is called
    Well, no, but. That would totally depend on the code in the
    (Draggable) class. Let's say you would have a private static var
    counter (private static, so a class property instead of an instance
    property) and you would increment that counter using a
    setInterval(). The second time you enter the frame and create a new
    Draggable object... the counter starts at the last value of the
    'old' object. So, you don't get another object with your function
    literal but you still end up with a faulty program. And the same
    goes for listener objects that are not removed, tweens that are
    running and so on.
    The destroy() method in a custom class (=object, I can't
    stress that enough...) needs to do the cleanup, removing anything
    you don't need anymore.
    2. if myDraggable != undefined
    You shouldn't be using that, period. If you don't need the
    asset anymore, delete it using the destroy() method. Again, if you
    want to make sure only one instance of a custom object is alive,
    use the Singleton design pattern. To elaborate on inheritance:
    define the Draggable class (class Draggable extends MovieClip) and
    connect it to the myClip_mc using the linkage identifier in the
    library). In the Draggable class you can define a function unOnLoad
    (an event fired when myClip_mc is removed using
    myClip_mc.removeMovieClip()...) and do the cleanup there.
    3. A destroy() method performs a cleanup of any assets we
    don't need anymore to make sure we don't end up with all kinds of
    stuff hanging around in the memory. When you extend the MovieClip
    Class you can (additionally) use the onUnLoad event. And with the
    code you posted, no it wouldn't delete the myClip_mc unless you
    program it to do so.

  • Hello there, am new here and very stressed, i have an Imac core i3 which is logging off itself after a few seconds of login, it goes back to the login menu where i put the password. I have tried to repair the os but my pioneer rom is not reading the disk.

    Hello there, am new here and very stressed, i have an Imac core i3 which is logging off itself after a few seconds of login, it goes back to the login menu where i put the password. I have tried to repair the os but my pioneer rom is not reading the disk. I press the :c" button on startup but its not picking up the disk in the rom, i have tried to put the disk in an external rom but same answer, am starting to think that my os disk is bad. Please help me.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    *Note: If FileVault is enabled under Mac OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • The option to create an instance of the source document  from a publication

    Hi,
    I have a question about the attitude of Business Objects Enterprise 3.1 with creating instances with scheduled publications.
    We have different publications scheduled with a deski report as source document. After running a publication always an instance is created behind the publication as a log file. If I look at the source document that was published  I donu2019t see an instance. I would like to automatically create an instance of the source document when the publication ran.
    In a few of my publications an instance is created on the(deski) source document when the publication ran successfully. How can I set the option to create an instance of the source document  of the publication?
    Thanks,
    Regards,
    Pieter

    Create an interface. say
    package MyPackage;
    public Interface APlugin {
         void runPlugin();
    }Then your plugin implements this interface. Then, to load and execute the interface:
    try {
          Class pClass = class.forName(className);
           APlugin plugin = (APlugin) pClass.newInstance();
            plugin.runPlugin();
       catch(ClassNotFoundException e) {
            .... plugin not found
       } catch(ClassCastException e) {
            .... plugin class found but doesn't implement APlugin
        } catch(InstantiationException e) {
            ... plugin badly defined e.g. doesn't have no-arg constructor
        } catch(IllegalAccessException e) {
            ... plugin or it's constructor not public
         }

  • The options tweet and facebook disappeared from the notification bar! What do I do?

    The options tweet and facebook disappeared from the notification bar! What do I do?

    Any restrictions set up in Settings/General/Restrictions?

  • Want to change the skin of tab , where i need the Graident mix to be used .

    Hi
    1. want to change the skin of tab , where i need the Graident mix to be used ... is it possible ?
    2. how to use Cool Animations( Fading of Old Panel to New Panel) while switching to next tab.

    Click the heading of the left-most column of numbers in order to reveal the current Play Order. When sorted on this column you can drag tracks up or down the list.
    When using another heading for sorting you can right-click on the playlist name and click Copy to Play Order to set an initial order which you can then manually refine.
    tt2

  • I have Adobe Photoshop Elements 10 and I wish to upgrade with Adobe Creative Suite 3 but the option is not coming up on the drop down menu

    I have Adobe Photoshop Elements 10 and I wish to upgrade with Adobe Creative Suite 3 but the option is not coming up on the drop down menu

    The first two issues sound like a video driver problem.
    What is the make/model of your video card/chip?
    What is the installed video driver number and date?
    For the last issue, it could be many things, including the video driver. I'd look over this ARTICLE, and if there is nothing in the first part, then move on to tuning up the OS an computer in the second part. That would probably be a good time to post the full specs. of your computer, and also both your Project and Source footage. Finally, part three covers many troubleshooting tips, and furnishes many links.
    Good luck,
    Hunt

  • I was wondering why the iPhone 5 has the option for a battery percentage and the iPod touch 5g doesn't? I mean... they are almost both the same thing... just the iPod does not have the phone.

    I was wondering why the iPhone 5 has the option for a battery percentage and the iPod touch 5g doesn't? I mean... they are almost both the same thing... just the iPod does not have the phone.

    One likely reason is the % battery is not that accurate because of the smaller battery capacity in the iPod compared to iPhone and iPad. Users why use a % battery app post that the % reading changes a lot.

  • I'm trying to record only part of my screen using my Quicktime 10.0, but once I press record in the "Screen recording" feature it automatically starts recording and doesn't give me the option to choose what part of the screen to capture. What gives?

    I'm trying to record only part of my screen using my Quicktime 10.0, but once I press record in the "Screen recording" feature it automatically starts recording and doesn't give me the option to choose what part of the screen to capture. What gives?

    QuickTime version 10 can only record the entire screen.
    10.1, 10.2 and 10.3 offer part of the screen recording.

Maybe you are looking for