AS1/2 - need help controlling mc from another mc

I'm mostly a point-and-click user of flash. I'm in CS5 and have built a simple flash website (with A/S1-2) having a primary swf (content.swf) and other transparent swf (home.swf, contact.swf, etc.) that load in for each menu button. When another menu button is clicked, my A/S instructs to unload all mc's from level 1 and load in the next swf in that same level.
My challenge. I need to have a button in "home.swf" go to, say, "contact.swf". How can this be done?
Thanks, John

You can probably use whatever you have now though it may require and added argument or so (unless you don't understand what you have now).  The main file as it currently is could load sections based on a function being passed an argument that identifies which section is to be loaded.  So you click a button and that button calls the loading function, passing the name of the file that will be loaded.  The main file's function does the loading work.  Your loaded section(s) can do the same by using a _root reference to call that function (or possibly a _level0 reference).

Similar Messages

  • I need to transfer music from another itunes library to my current. my last computer crashed and i do not want to lose all of the music stored on my nano. Please help!

    I need to transfer music from another itunes library. My last compter hard drive failed. I have several hours of songs and I don't want to lose these. Is there a way to transfer music from another libray to current? I have recovered the purchased music but would like to transfer other. I have a mini without a disc drive so it makes loading the same music difficult. Please help.

    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • Need help coping project from one computer to another.

    I need help coping project from one computer to another.  I loaded all video on computer 1, copied events and project folder to computer 2.  I was told I only needed to copy the project folder back to computer 1 since the events folder is already there.   I copied project folder back to computer 1 but the files wont open.  I dont have computer 2 available. 
    Please help!!!

    Hi
    No that's not the way to do it - iMovie gets confused and in some cases the problems might be un-repairable.
    You've got several problems
    • iMovie'08 - CAN NOT MOVE PROJCTS - You NEED iMovie'09 or iMovie'11 - I see no other working solution
    • Never MOVE or alter any folder named
    iMovie Projects - or -
    iMovie Events
    on DeskTop/Finder - This might be very harmful
    • Moving (Projects) and Events - HAS TO be done within the iMovie Application.
    You've got an Evets window and here You can view Your Events in two ways - Yearly - or - Yearly per Hard disk
    Here You can move within this "window" to another location
    • Projects - NO they do not contain Your full movie - only a document on howto use the material in Event folder
    and there might be worse if You added Photos from iPhoto and Audio from iTunes/Garageband - then You have
    to get this over to the second Mac too, to be able to continue editing.
    So to move Your projects to another Mac You need
    • iMovie'09 or 11
    • an external hard disk -
    MUST BE Mac OS Extended formatted - as UNIX/DOS/FAT32/Mac OS Exchange will not work for VIDEO
    Should be a FireWire one - as UBS/UBS2 performs badly when used for video
    • Then move/copy over within Project resp Events window in iMovie Application
    Hopefully I've been not to confusing or badly structured to be followed.
    Yours Bengt W

  • How to open the 10g Database Control Webpage from another computer ?

    it is a freshly installed Oracle 10gR2 EE on windows xp professional.. all settings are default by installer.
    i can open the Database Control Webpage on the database machine by typing http://localhost:1158/em in IE.
    however when i try to open it from another pc on the same LAN by using http://database_pc_ip_address:1158/em in IE, it says the page can not be found.
    what else need to be done before i can open the Database Control Webpage from another PC?
    thanks for the help !

    You have a configuration problem on your database machine, LOCALHOST is resolved to the internal loopback address 127.0.0.1, not to the actual IP-Address of the machine. Such a configuration works only locally, for remote access you have to specify a hostname known to the network. Check the installation guide for the correct setup (machines connected to a network or not, DHCP or not):
    http://download-uk.oracle.com/docs/cd/B19306_01/install.102/b14316/reqs.htm#BABBDGBI
    Werner

  • Unable to open 10g Database Control Webpage from another computer

    Unable to open 10g Database Control Webpage from another computer
    Hi Gurus
    I have just installed Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 on my PC Windows XP , created database and configured DB control
    I can open Database Control Webpage on the database machine by typing
    http://USI2374993VND0.vlgdw2k.visteon.com:1158/em
    or
    http://136.18.70.189:1158/em
    But can not open it from another PC
    When I do following from another PC
    1. http://USI2374993VND0.vlgdw2k.visteon.com:1158/em
    Get error: [code=DNS_NO_DATA] The IP address was not found during the DNS lookup. Contact your system administrator.
    2. http://136.18.70.189:1158/em
    Get error:Can not display web page
    I can ping 136.18.70.189 but not USI2374993VND0.vlgdw2k.visteon.com
    On the other PC I also tried adding 136.18.70.189 to
    tools - internet options - security - local internet - sites - advanced - add this web
    site to the zone as http://136.18.70.189
    But it did not work
    Please help with any ideas
    Thanks a bunch
    New DBA

    Firewalls?
    DNS translation issues?

  • TS1389 I need help removing UAC from itunes..

    I need help removing UAC from itunes so it will not allow me to open itunes. Everything I have read from other comments that you shouldn't turn off your user account control. I just to be able to open itunes. Can anyone help me with this problem?? Greg, ogrady612@yahoo,com

    I had this problem too but you do not need UAC to be turned on.
    Click on start and search for 'uac' in the search box at the bottom and click on 'Change User Account Control Settings' when it comes up. Move the slider to the bottom when the window appears and save the changes and your done!
    It's worked for me and my uac has been off for months without causing me any problems!
    Hope this helped

  • Need to run midlet from another midlet

    Need to run midlet from another midlet
    How to do it?
    In my midlet user get link to web-page, and i want to start mobile browser with this page.

    Hi,
    In order to run midlet from another midlet you may use push registry. Go through the API of that I am not sure but as far as I know push registry is the only solution to that
    Sunil
    Software Developer - J2ME

  • I need help removing CS3 from Windows 7 so I can reinstall

    I need help removing CS3 from Windows 7 so I can reinstall

    Before trying to remove try re-installing CS3 right on top of the current install.  Often re-installing Photoshop on top of itself fixes the install.  If it does be sure to apply the cs3 updates.
    Download Adobe CS4 and CS3 Free Trials Here (incl. After Effects) | ProDesignTools
    your product key can be retrieved from here https://www.adobe.com/account/my-products-services.html
    use these links for the updates.
    Adobe - Photoshop : For Macintosh
    Adobe - Photoshop : For Windows

  • Please i need help with switch from the us store to malaysian store how i can switch

    Please i need help with switch from the us store to malaysian store how i can switch

    Click here and follow the instructions to change the iTunes Store country.
    (82303)

  • I DESPERATLY NEED HELP TRANSFERING SONGS FROM IPOD TO ITUNES LIBRARY

    hi my computer crashed downstairs and i need help moving all my songs from my ipod to my itunes library, on the other computer...will someone please help me?

    Hello Markatkis,
    Make sure your not connecting it to more than one PC. A new iPOd is set to "Auto Update" by default. With this setting all you do is plug the iPOd into the PC and iTUnes automaticly opens, loads all the songs it has listed in iTunes to the iPod, and after its done, ejects the iPOd.
    If you connect it to another PC tho with iTUnes on it you usually get a promtp that in short says "iPOd library linked to another PC, do you want to link to this one" if you click yes, it wipes the iPOd clean and loads only whats on that PC.
    Since your new to all of this a great place for you may be the "iPod 101" site. It will show you all the bacis ropes of using your iPOd, using iTUnes, and using them both together. http://www.apple.com/support/ipod101/

  • I need help restoring data from my time machine.

    1)  On the time machine, where do I find the TRASH file that is located on the dock in my desktop?  I'd like to restore that to a prior date but can't find it.
    2)   I DID A VERY BAD THING & need help to get back to where I was before.   I wanted to delete files that were taking up lots of space.  My OTHER section  was using 160G.  I downloaded OmniDiskSweep and found that 120G was being used by my virtual machine (I run Quicken in Windows, through VMware).  I started to delete files that were called Snapshots assuming these were the snapshots that the program regularly takes of my files. Apparently they were not. I also deleted the program Windows XP Professional because that was never used.  When I try to open VM or quicken program, it says it is missing a particular snapshot, i.e. Snapshot 11104.  I deleted about 20 of these. I left all the other files that said Windows XP Home Edition.  But now it shows that I only have the Professional Edition, even though that's what I deleted.  I'm trying to restore from Time Machine and it looks like the information is not there - I've tried various different backups and nothing seems to have the information I need.  The earliest back up I have is from 5/7 when I started time machine on a new external 1TB HD.  Would that have the information I need since it's the very first back up?  Please Help.

    I am assuming it's real data because it's taking up storage on my HD.  It falls in the category "other" and the total of this section is 160G. Here is a snapshot of the virtual machine.
    I also took a shot of the VM snapshots & it tells how much space is being taken up by the snapshots.
    I've now changed the number of snapshots taken down to 12 (didn't know I had this option) & I can delete alot of the 21 snapshots that have already been saved.  I have no idea how much of the HD was set aside for the VM because someone else installed it for me 5 years ago.  I've had enough problems with it over the years that I've wanted to switch to Quicken for Mac or find another financial program to use. I've upgraded the VM 2x over the years, but didn't want to spend $100 for Version 5.   I understand the concept of a VM but that's about all.
    I did do the disk cleanup in Windows on the C drive.  I deleted 700 MB of temporary files and then compressed 4G of data down to 2G.  While the cleanup was progressing it said that the C drive was 30.99G and 78% of it was free.  That just doesn't make sense to me.  It recommended a defrag, so I did that also.
    I'm pretty sure it's real data because I recently had to switch from a 320G external HD for TM, to a 1T HD.  One TM backup was over 300G which I found to be excessive because I basically use my computer for mail, some word processing, and my financial data.
    Thanks again for all your help. I really appreciate it.

  • Control iView from another iView

    Hi,
    I would like to know, how I can control on iView from another iView. Is there any HowTo-Guide about this? Or a simple example, maybe a list of links in one iView and the displaying of those links in the other iView.
    Kind regards,
    Dominik

    Hi Dominik
                           You can do that using the client side eventing framework (EPCF) provided in EP.
    Please go through this
    http://help.sap.com/saphelp_nw2004s/helpdata/en/ce/3e98408d953154e10000000a1550b0/frameset.htm
    Hope this helps,
    BR,
    Goutam.

  • Need help in migration from Layer2 to layer3

    HI Guys
    Need u r help in migration from layer2 switched network to layer3.
    here is the setup there are 9 sites connected with a 10gig backbone in a ring.each site has a 6513 but at the data centre site we having two 6513.we are having a combination of voice and data vlans.at present all the sites are connected with layer2 trunks.all the trunks are teminated at the core ie datacentre site.so how should i procedd and what are the advantages of it ie migration.
    Thanks
    Mahmood

    For this migration you first need to assign IP addresses to your connections between switches. This could be /30 (or /31, if supported) subnets. You should also consider running some dynamic routing protocol such as OSPF between switches.
    Hope this helps.

  • Desperately needs help burning DVD from iPhoto

    I am using iPhoto 6.0.6. I desperately need help burning a DVD of a slide show that I created for my daughter's wedding.
    I put several songs together by opening them and then combining them using QuickTime Pro. I imported the audio into iTunes and created a slide show using iPhoto. The slide show is perfect! The slides are finally in sink with the music just as I want them! But I don't know how to burn the slide show as a DVD.
    I tried exporting the video from iPhoto to my computer, but at the end of the export, I get this message: please note that the music included in the slideshow can only be played on authorized machines. And when I try to play the video (after the export), most of the music on the video cannot be heard. When I try to authorize my machine, I am told that it's already authorized.
    If someone would send detailed instructions on how to proceed, I would greatly appreciate it.
    Greg

    Is your problem the DRM audio tracks you purchased from iTunes store?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • I need help please, upgrading from OS 10.6.8...

    Please help me - I'm such a technophobe!! I need help upgrading from OS 10.6.8... I get part way through the process and get a box saying "The link needs to be opened with an application" and I don't know what to do next...

    The only way to upgrade from 10.6.8 (which is high as Snow Leopard goes) is to obtain Lion or Mountain Lion from the Online Apple Store or Yosemite from the Mac App Store.
    The requirements for Lion are:
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price (though it's reported to have been removed from sale in some countries so may well cease to be available generally) but there seems little point as the system requirements are the same for Yosemite (10.10.x) - which is free - unless you need to run specific software which will run on Mountain Lion only. Mavericks (10.9.x) is no longer available.
    The requirements for Mountain Lion and Yosemite are:
    OS X v10.6.8 or later
    2GB of memory
    8GB of available space
      and the supported models are:
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    Xserve (Early 2009)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    Yosemite is available from the Mac App Store (in Applications). Mountain Lion can be obtained the Online Apple Store.
      You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

Maybe you are looking for