AS2 adapter error during inbound processing
Hello,
We have upgraded PI to version 7.1 and now we are testing the Seeburger AS2 adapter.
We have received a testmessage from an AS2 partner and it is shown in the message monitoring of the Seeburger adapter workbench, with status succesfull.
Only the message is not on the integration server. The message is not shown in sxmb_moni or the message monitor of the RWB.
In the RWB the communication channel (CC_AS2_Sender) gives the following error:
"Message inititiation failed: Processing error"
The message itself gives the following error:
"Inbound message processing failed! performing rollback
Can anyone help us with this?
Thanks in advance.
Regards,
Marco
Hi Marco,
the message is not forwarded to the intergration egine because there might be an error in your communication channel.
Are there any other modules in the module chain of this communication channel?
Can you check "default_trace" and "application_log" for exceptions (/j2ee/cluster/serverXX/log)?
Did you also restart the Java Stack after the Upgrade?
regards,
Daniel
Edited by: Daniel Rexter on Jun 30, 2010 2:59 PM
Similar Messages
-
UMS Adapter Error during ums adapter endpoint activation
Hi,
I have well configured the usermessagingdriver-email on SOA11g driver for both imam/stmp protocols, but on deploying process with UMS Adapter (Reciving Notification) i got the error "UMS Adapter Error during ums adapter endpoint activation" with following
javax.resource.ResourceException
at oracle.tip.adapter.ums.inbound.UmsEndpoint.registerUmsAccessPoints(UmsEndpoint.java:212)
at oracle.tip.adapter.ums.inbound.UmsEndpoint.registerApplication(UmsEndpoint.java:99)
at oracle.tip.adapter.ums.inbound.UmsEndpoint.<init>(UmsEndpoint.java:92)
at oracle.tip.adapter.ums.inbound.UmsPollerEndpoint.<init>(UmsPollerEndpoint.java:47)
at oracle.tip.adapter.ums.UmsResourceAdapter.endpointActivation(UmsResourceAdapter.java:183)
at oracle.integration.platform.blocks.adapter.fw.impl.AdapterFrameworkImpl.endpointActivation(AdapterFrameworkImpl.java:492)
at oracle.integration.platform.blocks.adapter.fw.jca.lifecycle.JCAEndpointActivation.performEndpointActivation(JCAEndpointActivation.java:649)
at oracle.integration.platform.blocks.adapter.fw.jca.lifecycle.JCAEndpointActivation.activateInboundJcaEndpoint(JCAEndpointActivation.java:633)
at oracle.integration.platform.blocks.adapter.fw.jca.lifecycle.JCAEndpointActivation.performActivation(JCAEndpointActivation.java:387)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterServiceRevisionRegistry$AdapterServiceRevision.endpointActivation(AdapterServiceRevisionRegistry.java:593)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterServiceRevisionRegistry$AdapterServiceRevision.activate(AdapterServiceRevisionRegistry.java:445)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterServiceRevisionRegistry$AdapterServiceRevision.setDefaultRevision(AdapterServiceRevisionRegistry.java:409)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterServiceRevisionRegistry$AdapterServiceSeries.setDefaultRevision(AdapterServiceRevisionRegistry.java:334)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterServiceRevisionRegistry$AdapterServiceSeriesSet.setDefaultRevision(AdapterServiceRevisionRegistry.java:140)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterServiceRevisionRegistry.setDefaultRevision(AdapterServiceRevisionRegistry.java:103)
at oracle.integration.platform.blocks.adapter.AdapterService.defaultRevisionChanged(AdapterService.java:348)
at oracle.integration.platform.kernel.FabricKernelInitializerServlet$1.processDefaultInSeries(FabricKernelInitializerServlet.java:824)
at oracle.integration.platform.kernel.FabricKernelInitializerServlet$1.run(FabricKernelInitializerServlet.java:773)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Also when I have received email in my mailbox nothing is happened, no new istance has created, but on start soa server 11g all messages which are currently located in mailbox had been processed and ( on usermessagingdriver-email I can saw Messages Received Successfully)
Thanks,
MilosHi Saravana
Have you tried : http://technology.amis.nl/2012/05/18/proces-email-with-the-new-ums-adapter-of-soa-suite-ps5/ ?
Regards
A -
Hi Experts,
We have a web service hosted on PI and getting the Tax Jurisdiction values from Taxware via ECC(ECC has a TCP/IP connection to connect to Taxware system, From there ECC gets Taxjurisdiction Codes and gives back to PI).
When we make a call to this Web service following Error response has been given. Please let us know what could be the reason.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Inbound Proxy
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1 />
<SAP:P2>ZCL_GET_TAX_IN</SAP:P2>
<SAP:P3>GET_TAX_JURISDICTION_SYNC</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing Message E TAX_TXJCD 110 cannot be processed in plugin mode HTTP</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Thanks,
Sekhar.JHi,
We are using XI adapter. The same Web Service is working good in Development and Quality Enviroments, I am wondering why it is failing in Production Environement intermittently. And also in ECC we are using TCP/IP connection to fetch Tax Jurisdiction codes from TaxWare System. This TCP/IP connection was configured in SM59 of ECC. PI will make call to ECC and ECC will make call to TaxWare and returns the result back PI.
Thanks,
Sekhar.J -
DYNAMIC_CALL_FAILURE Error during proxy processing An exception with the ty
Hi,
SRM 7.0 contains 2 clients:
Sender: 100 for EBP, logical system is CLNT100
Receiver: 200 for SUS, logical system is CLNT200
both the clients are connected through PI 7.0, logical system of PI is CLNT001.
From SPROXY of 100EBP, i'm executing the outbound proxy, in moni sent msg success.
In PI also msg is processed.
But in SUS200, it is showing below error msg:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Inbound Proxy
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
<SAP:P2>CL_BBPX_TRADING_PARTNER_SUS_IN</SAP:P2>
<SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application Error</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Pls help in resolving the same....
tnx n rgds,
baluHi,
How did you solve the issue? Can you please provide the solution.
Thanks,
-Devi Swain -
Error In inbound Processing IDoc
Dear All,
I am facing error while inbound processing of IDoc
In status record of IDoc following errors are occuring
Status 60 : EDI: Syntax error in IDoc (mandatory segment missing)
The segment E1MAKTM has the attribute 'Mandatory' in the syntax description of the basic type MATMAS05 (customer enhancement ). However, the segment is missing in the IDoc
Status 51: Application Document not posted
Log details :
Error : Material Number should be filled.
When i checked IDoc all 4 fields in E1MAKTM have the values in inbound IDoc.
Please guide me how to resolve these issues so that IDoc will be posted and Material Master will get created in reciever system.
ThanksHi Praveen,
I checked the data in IDoc for this segment.
It is ok as required in basic message type.
e.g. the error says that mandetory segment E1MAKTM is missing.
when i check basic type
MSGFN : Function
internal data type : CHAR
Internal length : 000003 characters
Position in segment : 001, Offset : 0063. external length : 000003
SPRAS : Language Key
internal data type : LANG
Internal length : 000001 characters
Position in segment : 002, Offset : 0066. external length : 000001
MAKTX : Material Description (Short Text)
internal data type : CHAR
Internal length : 000040 characters
Position in segment : 003, Offset : 0067. external length : 000040
SPRAS_ISO : Language according to ISO 639
internal data type : CHAR
Internal length : 000002 characters
Position in segment : 004, Offset : 0107. external length : 000002
is information.
and data in segment of IDoc is
MSGFN 005
SPRAS E
MAKTX MANATA2000 TEST ALE
SPRAS_ISO EN
which i think is ok.
I have no clue why this syntax error is coming.
Thanks
Niketan -
Error during proxy processing An exception with the type CX_BBPX1_STD_MESSA
Hello,everyone!
My PI version is 7.11,SRM SUS version is 7.0,ECC version is 6.0 ,When I import XI SRM CONTEN,sending IDOC in ECC,there is a error some of the mesages:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
<SAP:P2>CL_BBPX1_SUSPO_IN</SAP:P2>
<SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application Error</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Detialed error from SXMB_MONI,
Error in XI interface: Exception occurredE:BBP_PD:147 -Enter a country for partner 0015111411 with type 'Vendor' I:R5:553 -'Different country' field contents deleted because identical to 'Country' E:BS:002 -"Create" is not allowed (SUS Purchase Order 7100076527 ) Program: CX_BBP_BD_ERROR===============CP; include: CX_BBP_BD_ERROR===============CM002; Line:
This issue only ocuured for partner 0015111411, but we tried with other partner ID and those messages are processed sucessfully and PO is created.
I have a doubt that, is there functionality in proxy to compare the country with partner in SRM system. Could please anyone help me one the same.
Regards,
Baskaran KHI,
This is a standard proxy. I'm not sure how to debug the proxy with payload. Could you please tell me the steps.
We have one more error message
<FAULT_TEXT>Error in XI interface: Exception occurredE:BBP_PD:147 -Enter a country for partner XY91 with type 'Sold-to Party' E:BS:002 -"Create" is not allowed (SUS Purchase Order 7100076526 ) Program: CX_BBP_BD_ERROR===============CP; include: CX_BBP_BD_ERROR===============CM002; Line: 57</FAULT_TEXT>
Is there any table to check these details like Sold-to Part, Vendor etc in SRM system?
Regards,
Baskaran K -
Permanant Error in Inbound Processing in BPM
Hi All,
i have done a File1->JDBC(Synch)->File2 scenario using BPM.
It works fine when i have data in input file ie File1. However when my input file empty my scenario shows green flag in "OutboundStatus" and in queue gives error "Permanant error in Inbound Processing". When i tried to see the error in details got exception in START_PROCESS....
After deleting this entry from queue and sending file with data it works fine.....
I just want to know why it happens....? My input file can be empty as i am using it for triggering the scenario.
Do i need to do any settings in BPM or scenario to handle this?
Thanks,
Atulhi atul,
in the rec step where u set the start process check box, you give the message. it is this message that is used to start the BPM process and not ur input file... the input file is used to trigger ur scenario not ur process. therefore u have exception in 'start process'.
hope it helps.
regards,
latika. -
Error during Proxy Processing from ECC system
Hi All,
I had created Webservice using ABAP in ECC system with Message interface designed in XI system. This Webservice will simply displays employee address when you enter employee id and address type.During my testing of Web service in ECC system via Tcode WSADMIN, I am getting below error
"An error has occurred. Maybe the request is not accepted by the server: "
"Error during proxy processing"
Request
POST /sap/bc/srt/xip/sap/Z_ADDRESS_01?sap-client=100 HTTP/1.1
Host: rpmsap3.rapidigm.com:8080
Content-Type: text/xml
Connection: close
authorization: <value is hidden>
Content-Length: 389
SOAPAction: ""
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema"><SOAP-ENV:Body><ns1:Request_Message xmlns:ns1='http://sap2webservice'><Employee_Id>MM01</Employee_Id><Address_Type>AM</Address_Type><Date>11/11/2006</Date></ns1:Request_Message></SOAP-ENV:Body></SOAP-ENV:Envelope>
Response
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema"><SOAP-ENV:Body><ns1:Request_Message xmlns:ns1='http://sap2webservice'><Employee_Id>MM01</Employee_Id><Address_Type>AM</Address_Type><Date>11/11/2006</Date></ns1:Request_Message></SOAP-ENV:Body></SOAP-ENV:Envelope> HTTP/1.1 500 Internal Server Error
set-cookie: sap-usercontext=sap-client=100; path=/
content-type: text/xml; charset=utf-8
content-length: 270
sap-srt_id: 20061111/154215/v1.00_final_6.40/A901A40749EEA74BB8D8AB72B56C02A7
server: SAP Web Application Server (1.0;640)
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/"><soap-env:Body><soap-env:Fault><faultcode>soap-env:Server</faultcode><faultstring xml:lang="en">Error during proxy processing</faultstring></soap-env:Fault></soap-env:Body></soap-env:Envelope>
Appreciate any help on above issue
Regards
Manish MundraHi All,
Please help on below issue.
Thanks in Advance
Regards
Manish -
Hi All,
I am facing the following problem in production server when even the file got processed successfully .
Error during proxy processing An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause The system tried to insert a data record, even though a data record with the same primary key already exists
Can you please suggest how it can be handled?
Regards,
SarasYou need to debug your proxy program and check all the insert statemrnts. Looks like there is an exception being thrown in the proxy (may be after the completion logic to push the data in to db) which is not being caught.
Proxies are object oriented and it is a good practice to implement Exception Handling mechanism.
VJ -
AS2 Adapter Error: Error while parsing AS2 message: AUTHENTICATION_ERROR #
Hi,
Following Scenario: Inbound.
i have been receiving messages via Seeburger AS2 Adapter with the following Error message
Error while parsing AS2 message: AUTHENTICATION_ERROR #
I have done the following in the AS2 adapter as per findings in the forum
1. Unchecked the Authentication Required Flag.
2. AS2 Certificates are fine.
3. Use Authentication: Disabled (there is no authentication)
even though every thing seems to be fine i am not able to receive messages successfully. Please let me know what could have gone wrong here.Hi Venkatesh,
>> Everything is provided in the Sender Agreement. Partners Certificate, Self Encryption & Signing certificate
How come you are using encryption when you are receiving the message. I think it might be decryption.
1. Anyway please cross check whether you provide the following correct details in Sender agreement.
Sender Configuration
Authentication Certificate : Partner's public certificate.
AS2 Receiver Configuration
Decryption Key : Own private key.
Signing Key : Own private key.
2. Can you please check and tell in the Seeburger Monitoring for the incoming message, whether they are sending the message with encryption and signing? This you can check in the Seeburger Monitoring. -
Planning - Recieving errors during configuration process
Hello,
We are currently installing System 11.1.1.1 using Weblogic 9.2 MP1. We have successfully installed and configured Shared Services, Workspace and Essbase. We have installed Planning but I keep recieving errors during the configuration process. The following errors are logged in the configtool_err.log file:
Feb 10, 2009, 07:18:10 AM), com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel, ERROR, The specified database is already configured.
(Feb 10, 2009, 07:19:59 AM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Error happen while trying to get Planning system DB info from registry.
(Feb 10, 2009, 07:30:10 AM), com.hyperion.cis.config.servers.WlsAppServer, ERROR, WebLogic Admin server has not started after about 10 minutes.
(Feb 10, 2009, 07:30:12 AM), com.hyperion.planning.HspDBConfigurator, ERROR, HP-9.5.0 product is not registered.
(Feb 10, 2009, 07:30:13 AM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Deployment failed. Admin server doesn't started.
(Feb 10, 2009, 07:41:35 AM), com.hyperion.cis.config.servers.WlsAppServer, ERROR, WebLogic Admin server has not started after about 10 minutes.
(Feb 10, 2009, 07:41:35 AM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Deployment failed. Admin server doesn't started.
(Feb 10, 2009, 07:50:05 AM), com.hyperion.planning.HspDBConfigurator, ERROR, HP-9.5.0 product is not registered.
Any thoughts or information would be much appreciated.
Thanks
TonyHi,
What O/S are you installing on?
Is it possible you can try and break down the configuration of planning.
So only have Shared Services / Open Ldap Services running, make sure you can log into shared services console
Run the configurator, choose planning > Configure Database (are you using a seperate database for each product, I am finding it helps with installations)
If you are select the "Perform 1st Time configuration of Database" - Chose Drop and re-create tables"
If successful move on to the configure - Deploy to application Server.
Cheers
John
http://john-goodwin.blogspot.com/ -
Error during propagation process in streaming
I am getting following error during propagation
ORA-12170: TNS:Connect timeout occurred ORA-12170: TNS:Connect timeout occurred
In order to resolve this i add following lines in sqlnet.ora on both nodes, but problem is still there....
SQLNET.SEND_TIMEOUT=300
SQLNET.RECV_TIMEOUT=300
SQLNET.INBOUND_CONNECT_TIMEOUT=300
SQLNET.DEFAULT_SDU_SIZE=32767
SQLNET.RECV_BUFF_SIZE=655336
SQLNET.SEND_BUF_SIZE=65536Need your help in resolving this issue........Hi,
What is Resp. Resolver Name and Decision Type in your Process Level Definition? Did you create custom agent BADI implementation?
Regards,
Masa -
HI..
I'm having an issue while installing obiee 11g(11.1.1.7.0) in windows server 2012 and using the database as ms sql server 2008. During configuration process after the installation process is completed , here the process is stopped at "Step:executing opmnctl start configuration_obisch1" status "failed"
Here is the error:
Error
opmnctl task failed
Step Executing: opmnctl start coreapplication_obisch1 failed
Configuration Action "Executing opmnctl start coreapplication_obisch1 " has failed. please check log files...
any help would be great
thanks..Friend,
Installer file size is:
Size: *1.23 GB (1,323,085,837 bytes).*
Size on disk: *1.23 GB (1,323,089,920 bytes).*
I tested also disabling antivirus on my PC and disconnect the power cord before starting the installation of JDeveloper. In both tests the result was the same.
Some additional recommendations to solve this case.
Thank you for supporting.
Edited by: Luis_vkacito on Nov 15, 2012 6:48 AM -
Seeburger As2 adapter error after upgrade
Hello,
After an upgrade from PI 7.01 to PI 7.11 we have problems with our AS2 seeburger adapter. We installed the compatible version of seeburger but got stuck on the following error:
Message could not be forwarded to the JCA adapter. Reason: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: java.io.IOException: org.bouncycastle.cms.CMSException: key inappropriate for algorithm., SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: java.io.IOException: org.bouncycastle.cms.CMSException: key inappropriate for algorithm.
Thanks a lot for any advice,
Regards,
ErikHi
Pls chk the security jar files. you can download the latest version of these from java portal. This might fix the issues related to Key.
Srikanth Srinivasan -
Seeburger AS2 Adapter Error :AUTHENTICATION_ERROR
i am doing the scenario for Purchase Order -> XI ->File
custumer is posting the purchase order
and XI Receives the PO using AS2 Adapter (Seeburger) and sends the output as File
i have done all the AS2 Adapter configurations as mentioned below but still i am getting the error in Seeburger Monitoring, the Error is Authentication_Error
1. Communication chennel
Adapter Type : AS2
Direction : Sender
Transport protocol : HTTP
Message Protocol : AS2
AS2 : Authentication Required is Enabled
Message Subject : Filled which is in Seeburger Monitor
2. Sender Agreement
Sender Communicational chennel which is created above
Security Setting
AS2 Sender Config :
Authentication Certificate : Customer public key
AS2 Receiver Config :
Decryption Key : Private key
3. in Party Identifiers
Party Name
AS2 ID
is there any settings missing to rectify the error "AUTHENTICATION_ERROR"Hi
Check with PIAPPLUSER authentication
With this Check the following content on AS2 may be you get more clue.
http://www.customware.net/repository/display/WMFAQ/AS2-authenticationfailureinreceivingEDIINT+MDN
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/135b0b94-0701-0010-f6a9-86a14057544a
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bpxproj/edi%2bwith%2bpi
Handling EDI interfaces using Seeburger BIC modules
Thanks
Gaurav
Maybe you are looking for
-
After iOS 8 update it won't let me send regular sms's
WWhenever I. Try send texts to people with iPhones it will say 'cannot send message: iMessage needs to be enabled to send this message' i have turned iMessage off and would like to keep it that way
-
The good news ICAL now shows up on my MAC ---year, after years!! BAD news won't print (Safari) BOOO
-
How to paste style on whole table and not one cell at a time?
Hi, I am copying a style and then trying to paste it on a whole table, but it will only allow me to paste the style on each cell separately, and it takes a long time. Is there a way to paste a style on the whole table? Thanks, Shani
-
I just switched over to Ubuntu 6.10, and for some reason Keyboard.readInt() doesn't work for me anymore, after I import cs1.Keyboard I get the error Error reading int data, MIN_VALUE value returned. when I try to do int x = Keyboard.readInt(); I assu
-
I/O error (6) when writing too large chunks to Datalog format
I have an application on an NI-PXI-8108, that writes large chunks of data to a datalog file. When it reaches a certain size, I get a generic file I/O error. The error appears at about 32MB per write action. So there might be a limit or optimization I