AS2 Adapter.. How i can receive the MDN messages?

Hi All,
Doing IDOC to EDI scenario.
Iam using AS2 adapter to send the messages to partner system and i need to receive the MDN from partner system.
1. what are configuration settings i need to provide in AS2 receiver adapter?
2. I need to put option as Refer MDN to XI system..?
3. Is it necessary to create one more Sender channel and sender agreement to recevie the MDN?
4. Why we have the option as Asynchronous MDN settings in AS2 sender adapter ?.
Kindly let me know if anyone knows the answers.
Thanks & Regards
Seema.

Thanks Anoop for the answer.
So if i want to do the scenario for Idoc to EDI.
then the steps will be..
1.
- AS2 rcv adapter -- to send the message to partner.
- all remaining steps like sx agreement,rx agreement,interface deter,Rx determination to send the actual msg.
2.
- Again one AS2 sender channel to receive the MDN from partner for the same scenario
- one sender agreement for MDN.
TO receive the MDN.. no need of rx agreement,interface determination,rx agrrement??
If we want to see the MDN.. how we can see it?
3.I have a scenario where, once i receive my MDN message and with the help of Data in MDN message , i need to update my custom table in SAP by inbound processing.Is it possible??
Please help me.
Regards
Seema.

Similar Messages

How i can read the short message using j2me?

I want to read or access the short messages of the phone using j2me programming ,but it seems the jsr not support ?

Hi Darry!
i also has a requirement to read SMS msgs from inbox through MIDlet .
but i only found that we can only access an SMS by receiving at a particular port number. Once the SMS reached the inbox there is no way of reading it in J2ME.
can you explain hw it can be done.
Have you done it before on any device ?
Thanks in advance

Seeburger AS2 Adapter - How to extract copy of file sent out ?

Hi Experts,
The scenario is SAP R/3 sends idoc to PI. PI converts this into a flat file and sends to Trading Partner through Seeburger AS2 adapter.
We can trace the message content in XML format within PI using SXMB_MONI or RWB. How to extract a copy of the Flat file converted by AS2 adapter and sent to Trading Partner ?
Thanks very much for you help !
Thanks,
Rukmani

>>Was hoping for a method that does not need additional coding.
None of the two methods I suggest require coding. First method just require adding 1 line in module config in your communication channel. Second method requires one addition config in receiver determination and agreements.
>>is there a way to get the converted message content from SeeBurger Workbench even for successful messages ?
No. If you have purchased Message Tracking, then you could configure that for your scenarios to view payloads. However, this method will definitely need some coding.
Regards,
Prateek Raj Srivastava

AS2 Sender adapter.. How we can receive 2 messages from same partner??

Hi all,
I have to receive 2 AS2 messages from my partner like ORDERS and REMADV information.
I kept Message Subject as * for both my AS2 Sender adapters.
I configured both the scenarios and i ask my partner to send the messages and he got the error as
"403 : FORBIDDEN" .
But these two scenarios are working when i delete one scenario and run the other by keeping message subject as *
I felt like the messages can be diffferentiated only with Message subject when we are dealing with AS2 adapters.
Questions :
Is there any option in AS2 sender adapter where we can differentiate the messages apart from Message subject because my partners are sending the messages without any message subject.
Kindly let me know.. its urgent.
Regards
Seema.

Hi Swarup,
Thanks for the reply.
I think you totally misunderstood my question.
Here i will explain clearly..
Sender Party : PartyA
Sender AS2ID : A-AS2
Recevier party: PartyB
Receiver AS2ID : B-AS2
PartyB will be receiving messages from PartyA.
Say it is receving ORDERS and REMADV messages.Both are XML files.
So PartyB will be configured with two complete new scenarios and 2 AS2 sender adapters to receive the messages.I kept Message subject as * in both the sender adapters.
The messages are not coming in and clearly there is a confilct in selecting the correct communication channel.
Actually i read in one of the thread that the messages which are coming to XI will be picked up based on two things:
1) AS2 ID of the partner which is dicussed above and the second one is
2) Message subject
But from my partners we are receving the messages without any Message subject.
So in this situation how we can differentiate each messages and how the messages will go to correct communication channel.??
Regards
Seema.

When I open my computer I receive the following message: The procedure entry point sqlite3_wal_checkpoint couldnot be located in the dynamic link library SQLite3.dll How can this be corrected? I never got this message before and I have a iPhone and iPad

When opening Windows 7 I'm receiving the following message The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.......I have never rec'd this before............I have a iPhone and iPad...............How can this be corrected without interferring with the information on my computer? Thanks

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

I received a Pages attachment in email, but I can't open it. Says it's missing an "index.mlx" -- any idea what that is and how I can open the file?

Received a Pages attachment in email, but can't open it. Error message says it's missing an "index.mlx" -- any idea what that is and how I can open the file?

Many thanks ... after many trials and effort, the sender admitted he doesn't know what he did - he's new to Apple - so guess he'll have to get some training!

Can anybody tell me how to send/receive the sms from java application

Hi All,
Can any body tell me, how to send/receive the sms from java application to mobile phones.
I have installed the jsms engine and when i try to connect to the mobile device ,the jsms server is giving
the following error.
Cannot connect to GSM Device, error : -11

Which jsms? Google finds several.
Try the website where you downloaded it.

Can any body tell me, how to send/receive the sms from java application

Hi All,
Can any body tell me, how to send/receive the sms from java application to mobile phones.
I have installed the jsms engine and when i try to connect to the mobile device ,the jsms server is giving
the following error.
Cannot connect to GSM Device, error : -11

The best place to ask your question is at the JSMS website, forum or mailing list since this is no error that directly comes from a class belonging to the core Java classes.

How to set up the iPhone 5 so that I can receive iMessage (incoming messages) and send text messages (outgoing) every time?

How do I set up the iPhone 5 so that I can receive iMessage (incoming messages) and send text messages (outgoing) every time? I have limited internet quota but unlimited sms!

Thanks!!
The reason I don't want to set it off is because I want to let others send me iMessage - most people prefer that according to their plan.
How do I bring this request to the hands of the people doing the ios updates? Maybe they could work on this for the future...

I can no longer log into my ichat linked to my gmail. right after opening up ichat, receive the following message: lost connection with jabber. the server has unexpectedly disconnected.

i can no longer log into my ichat linked to my gmail. right after opening up ichat, receive the following message: lost connection with jabber. the server has unexpectedly disconnected. how to troubleshoot? thanks.

Hi,
There can be many reasons why the Login is "up the creek".
Any break in the network at your end whilst logged in will cause an issue.
A sort of discrepancy between what iChat thinks the state should be and what the server thinks.
If they don't agree the server will refuse to accept.
A Crash at the server end which does not log you out properly will also do it.
Any file at any time can be come corrupted.
Luckily with the iChat .plists they are recreated if removed with an iChat Restart.
If it were AIM you can also get your Account Suspended and this will not log you in.
(It tends to happen from Chat rooms where people notify AIM about bad behaviour (as they see it) and you have to apply to get Un-suspended).
Most of the big IM services use multiple servers.
Sometimes these go out of Sync.
In the case of AIM this happens when they remove Old unused Screen Names from people's Buddy List prior to making them available for re-registration. I am not sure if this happens at Google.
You seem to be talking about an account that has worked at Work and having new computer at home.
As I mentioned the Priority thing you have not said that it has coincided with the new computer logging in (this will kick the work Computer out of Google whether you are logged in on the Web Mail page or in iChat)
IN addition to that iChat stays partially logged in for Off Line IMs
This is done in the background by a support app called iChatAgent
If your Computer is ON but ichat is not started people can still send you Messages.
Instead of saving these on the server until you login iChat will start up.
Depending if the home Mac is effecting the Work Login it may be holding sway over your Login.
Using your girlfriend's login may have booted her Off Line where she normally uses the name/login.
The AIM Side can be specifically set to allow Multiple Logins and therefore NOT allow them. If this happens you get a warning and messages to do something about it.
You do not get these in any Jabber or Google Login as the Priority setting is supposed to take care of it.
If the Login works at the Web Mail Login and on one computer then the .plist on the work computer is the most likely issue.
There is a small chance that a Corrupt Buddy Pic (Home Folder/Library/Caches/com.apple.iChat/Pictures) may be the cause.
Set this folder to icon view and also use the Finder's View Menu > Show View Options and select icon view.
This should show all pics as their icon.
Check that all display properly.
At this point I would try a COMBO version update install of the last Update you did over what you have.
This often corrects hard to trace things
The 10.5.8 COMBO is here
11:28 PM Monday; June 20, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Why am I receiving the "Unfortunately, Messaging has stopped" error message and how do I fix it?

Why am I receiving the "Unfortunately, Messaging has stopped" error message and how do I fix it?

I am so upset. Please read my messages from my postings. This has nothing to do with SIM Card, Hard Reset, Apps, Google Gmail Account, nothing. I have gone thru all of this and NOTHING has fixed this. I went to the store today and spoke to the manager on duty. He said he had to try and duplicate the problem before he could help me. I showed him "screen captures" I did, told him it's out here on the board, etc. etc. Needless to say I ended up coming home with the same phone, "he" erased the phone and started over again. Well guess what, it's not a error with "MY" Gmail account being corrupted because if that is the case Mrs. Hayden14 has a bad Gmail account too. If you guessed it, the phone just crashed again! I was able this time to capture a report with ALL the history in it and saved screen captures to PROVE to him this is not a joke. Even the report says "Crash". This time it was something else I don't even or ever have used. I have also wasted over a day , yes a full work day on this without question.
I have had to get the run around for the last day. This is totally ridiculous, including them putting me on hold for 55 min. Oh, that's another funny story. Anyways, tomorrow morning I am going to the Verizon store one last and final time and I hope they decided to do the right thing and give me a phone that does not crash and works. It would be handy at work for me, especially where I work at. I hope hope hope someone listens to and helps me. I would love for them to see me walk in, take my phone and say to me were going to get you another phone, hand it to me, see if it works and prove it's the device. I don't hear anyone having this issue on other phone types so sounds like its the phone type.
I have had 3 phones now in the matter of 2 weeks. I am sure the FedEx charges will add up to a cost of a new phone at some point and start to outbalance your requirement to give me the same phone when it has the same problem.
Can't wait to see what happens tomorrow.

How we can limit the number of concurrent calls to a WCF service without use the Singleton pattern or without do the change in BizTalk Configuration file?

How can we send only one message to a WCF service at a time? How we can limit the number of concurrent calls to a WCF service without use the Singleton pattern or without do the change in BizTalk Configuration file? Can we do it by Host throttling?

Hi Pawan,
You need to use WCF-Custom adapter and add the ServiceThrottlingBehavior service behavior to a WCF-Custom Locations.
ServiceThrottlingBehavior.MaxConcurrentCalls - Gets or sets a value that specifies the maximum number of messages actively processing across a ServiceHost. The MaxConcurrentCalls property specifies the maximum number of messages actively
processing across a ServiceHost object. Each channel can have one pending message that does not count against the value of MaxConcurrentCalls until WCF begins to process it.
Follow MSDN-
http://msdn.microsoft.com/en-us/library/ee377035%28BTS.10%29.aspx
http://msdn.microsoft.com/en-us/library/system.servicemodel.description.servicethrottlingbehavior.maxconcurrentcalls.aspx
I hope this helps.
Rachit
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Im having trouble changing my security questions, they are from years ago so i do not remember them and the reset email is no longer active,and i dont know how i can use the account because i added money to it but it asks for the questions. anybody help??

im having trouble changing my security questions, they are from years ago so i do not remember them and the reset email is no longer active.., and i dont know how i can use the account because i added money to it but it asks for the questions. anybody help??
this says it all..

Welcome to the Apple Community.
Contact Apple through iTunes Store Support, and explain that you have forgotten your 3 security questions, that you can reset your password, but doing so doesn't reset your security questions.
Remember, support will receive hundreds, if not thousands of requests per day, some from people trying it on, others with little explanation and others that are written extremely poorly. Take the time to explain your situation properly, be precise and concise, brief but comprehensive.

How we can see the abap memory data

How we can see the abap-memory data
fine the code below
import lsind
         report_title
         table_name
         report_field
         change_display
         show_hide
         conversion_exits
         table_description
         form_program
         select_form
         update_form
         line_size
         line_count
         records[]
         fields[]
         header_fields[]
         select_fields[]
         xrep[]
         from memory id 'LZUT5U11'.
Regards
santhosh
mail-id : [email protected]

Dear Santosh,
ABAP MEMORY:
A logical memory model illustrates how the main memory is distributed from the view of executable programs. A distinction is made here between external sessions and internal sessions .
An external session is usually linked to an R/3 window. You can create an external session by choosing System/Create session, or by entering /o in the command field. An external session is broken down further into internal sessions. Program data is only visible within an internal session. Each external session can include up to 20 internal sessions (stacks).
Every program you start runs in an internal session.
All "squares" with rounded "corners" displayed in the status diagram represent a set of data objects in the main memory.
The data in the main memory is only visible to the program concerned.
CALL TRANSACTION and SUBMIT AND RETURN open a new internal session that forms a new program context. The internal sessions in an external session form a memory stack. The new session is added to the top of the stack.
When a program has finished running, the top internal session in the stack is removed, and the calling program resumes processing.
The same occurs when the system processes a LEAVE PROGRAM statement.
LEAVE TO TRANSACTION removes all internal sessions from the stack and opens a new one containing the program context of the calling program.
The ABAP memory is initialized after the program is called. In other words, you cannot transfer any data to a program called with LEAVE TO TRANSACTION via the ABAP memory.
SUBMIT replaces the internal session of the program performing the call with the internal session of the program that has been called. The new internal session contains the program context of the called program with which it is performed.
When a function module is called, the following steps are executed:
A check is made to establish whether your program has called a function module of the same function group previously.
If this is not the case, the system loads the associated function group to the internal session of the calling program as an additional program group. This initializes its global data.
If your program used a function module of the same function group before the current call, the function module that you have called up at present can access the global data of the function group. The function group is not reloaded.
Within the internal session, all of the function modules that you call from the same group access the global data of that group.
If, in a new internal session, you call a function module from the same function group as in internal session 1, a new set of global data is initialized for the second internal session. This means that the data accessed by function modules called in session 2 may be different from that accessed by the function modules in session 1.
You can call function modules asynchronously as well as synchronously. To do so, you must extend the function module call using the addition STARTING NEW TASK ''. Here, '' is a symbolic name in the calling program that identifies the external session, in which the called program is executed.
Function modules that you call using the addition STARTING NEW TASK '' are executed independently of the calling program. The calling program is not interrupted.
To make function modules available for local asynchronous calls, you must identify them as executable remotely (processing type: Remote-enabled module).
There are various ways of transferring data between programs that are running in different program contexts (internal sessions). You can use:
(1) The interface of the called program (standard selection screen, or interface of a
subroutine, function module, or dialog module)
(2) ABAP memory
(3) SAP memory
(4) Database tables
(5) Local files on your presentation server.
For further information about transferring data between an ABAP program and your presentation server, refer to the documentation for the function modules WS_UPLOAD and WS_DOWNLOAD.
Function modules have an interface, which you can use to pass data between the calling program and the function module itself (there is also a comparable mechanism for ABAP subroutines). If a function module supports RFC, certain restrictions apply to its interface.
If you are calling an ABAP program that has a standard selection screen, you can pass values to the input fields. There are two options here:
By using a variant of the standard selection screen in the program call
By passing actual values for the input fields in the program call
If you want to call a report program without displaying its selection screen (default setting), but still want to pass values to its input fields, there is a variety of techniques that you can use.
The WITH addition allows you to assign values to the parameters and select-options fields on the standard selection screen.
If the selection screen is to be displayed when the program is called, use the addition: VIA SELECTION-SCREEN.
Use the pattern button in the ABAP Editor to insert a program call via SUBMIT. The structure shows you the names of data objects that you can complete with the standard selection screen.
For further information on working with variants and further syntax variants for the WITH addition, see the key word documentation in the ABAP Editor for SUBMIT.
You can use SAP memory and ABAP memory to pass data between different programs.
The SAP memory is a user-specific memory area for storing field values. It is available in all of the open sessions in a user's terminal session, and is reset when the terminal session ends. You can use its contents as default values for screen fields. All external sessions can access SAP memory. This means that it is only of limited use for passing data between internal sessions.
The ABAP memory is also user-specific, and is local to each external session. You can use it to pass any ABAP variables (fields, structures, internal tables, complex objects) between the internal sessions of a single external session.
Each external session has its own ABAP memory. When you end an external session (/i in the command field), the corresponding ABAP memory is released automatically.
To copy a set of ABAP variables and their current values (data cluster) to the ABAP memory, use the EXPORT TO MEMORY ID statement. The (up to 32 characters) is used to identify the different data clusters.
If you repeat an EXPORT TO MEMORY ID statement to an existing data cluster, the new data overwrites the old.
To copy data from ABAP memory to the corresponding fields of an ABAP program, use the IMPORT FROM MEMORY ID statement.
The fields, structures, internal tables, and complex objects in a data cluster in ABAP memory must be declared identically in both the program from which you exported the data and the program into which you import it.
To release a data cluster, use the FREE MEMORY ID statement.
You can import just parts of a data cluster with IMPORT, since the objects are named in the cluster.
In the SAP memory, you can define memory areas (SET/GET parameters, or parameter IDs), which you can then address by a name of up to 20 characters.
You can fill these memory areas either using the contents of input/output fields on screens, or using the ABAP statement:
SET PARAMETER ID '' FIELD .
The memory area with the name now has the value .
You can use the contents of a memory area to display a default value in an input field on a screen.
You can also read the memory areas from the SAP memory using the ABAP statement GET PARAMETER ID FIELD . The field then contains the value from parameter .
The link between an input/output field and a memory area in SAP memory is inherited from the data element on which the field is based. You can enable the set parameter or get parameter attributes in the input/output field attributes.
Once you have set the Set parameter attribute for an input/output field, you can fill it with default values from SAP memory. This is particularly useful for transactions that you call from another program without displaying the initial screen. For this purpose, you must activate the Set parameter functionality for the input fields of the first screen of the transaction.
You can:
(1) Copy the data that is to be used for the first screen of the transaction to be called to the parameter ID in the SAP memory. To do so, use the statement SET PARAMETER immediately before calling the transaction.
(2) Start the transaction using CALL TRANSACTION or LEAVE TO
TRANSACTION . If you do not want to display the initial screen, use the AND
SKIP FIRST SCREEN addition.
(3) The system program that starts the transaction fills the input fields that do not already have default values and for which the Get parameter attribute has been set with values from SAP memory.
The Technical information for the input fields in the transaction you want to call contains the names of the parameter IDs that you need to use.
Parameter IDs should be entered in table TPARA. This happens automatically if you create them via the Object navigator.
Programs that you call using the statements SUBMIT , LEAVE TO TRANSACTION , SUBMIT AND RETURN, or CALL TRANSACTION run in their own SAP LUW, and update requests receive their own update key.
When you use SUBMIT and LEAVE TO TRANSACTION , the SAP LUW of the calling program ends. If no COMMIT WORK statement occurred before the program call, the update requests in the log table remain incomplete and cannot be processed. They can no longer be executed. The same applies to inline changes that you make using PERFORM … ON COMMIT.
Data that you have written to the database using inline changes is committed the next time a new screen is displayed.
If you use SUBMIT AND RETURN or CALL TRANSACTION to insert a program and then return to the calling program, the SAP LUW of the calling program is resumed when the called program ends. The LUW processing of calling and called programs is independent.
In other words, inline changes are committed the next time a new screen is displayed. Update requests and calls using PERFORM ... ON COMMIT require an independent COMMIT WORK statement in the SAP LUW in which they are running.
Function modules run in the same SAP LUW as the program that calls them.
If you call transactions with nested calls, each transaction needs its own COMMIT WORK, since each transaction maps its own SAP LUW.
The same applies to calling executable programs, which are called using SUBMIT AND RETURN.
The statement CALL TRANSACTION allows you to
Shorten the user dialog when calling using CALL TRANSACTION USING .
Determine the type of update (asynchronous, local, or synchronous) for the transaction called. For this purpose, use the addition CALL TRANSACTION USING UPDATE 'update_mode', where update_mode can have the values a (asynchronous), L (local), or S (synchronous).
Combining the two options enables you to call several transactions in sequence (logical chain), to reduce their screen sequence, and to postpone processing of the SAP LUW 2 until processing of the SAP LUW 1 has been completed.
When you call a function module asynchronously using the CALL FUNCTION STARTING NEW TASK ' ' statement, it runs in its own SAP LUW.
Programs that are executed with a SUBMIT AND RETURN or CALL
TRANSACTION statement starts their own LUW processing. You can use these to perform nested (complex) LUW processing.
You can use function modules as modularization units within an SAP LUW.
Function modules that are called asynchronously are suitable for programs that allow parallel processing of some of their components.
All techniques are suitable for including programs with purely display functions.
Note that a function module called with CALL FUNCTION STARTING NEW TASK is executed as a new logon. It, therefore, sees a separate SAP memory area. You can use the interface of the function module for data transfers.
Example: In your program, you want to call a display transaction that is displayed in a separate window (amodal). To do so, you encapsulate the transaction call in a function module, which you set as to Remote-enabled module. You use the function module interface to accept values that you write to the SAP memory. You then call up the transaction in the function module using CALL TRANSACTION AND SKIP FIRST SCREEN. You call the function module itself asynchronously.
Type ‘E' locks for nested program calls may be requested more than once from the same object. This behavior can be described as follows:
Lock entries from function modules called synchronously increment the cumulative counter, And are therefore successful.
Lock entries from programs called with CALL TRANSACTION or SUBMIT
AND
RETURN is refused. The object to be locked by the called program is displayed as already Locked by another user.
Programs that you call using SUBMIT or LEAVE TO TRANSACTION cannot come into conflict with lock entries from the calling program, since the old program ends when the call is made. When a program ends, the system deletes all of the lock entries that it had set.
Lock requests belonging to the same user from different R/3 windows or logons are treated as lock requests from other users.
Regards,
Rajesh.
Please reward points if found helpful.

HT201210 I am trying to update my iPhone but it seems that I have to many photos and music because I received the following message: The iPhone could not be updated; this device is not elegible for the requested build. Does anyone know how to fix this?

I am trying to update my iPhone but it seems that I have to many photos and music because I received the following message: The iPhone could not be updated; this device is not elegible for the requested build. Does anyone know how to fix this?

You have to delete the corrupt back-up so iTunes can at least back-up the current data on the iPhone and then restore it. Search these forums, there a several good posts on how to delete the corrupt back-up.

AS2 Adapter.. How i can receive the MDN messages?

Similar Messages

Maybe you are looking for