AS2 Connection error in PI
Hi PI Experts,
IDoc to AS2 (HTTPS) scenario.
I am using AS2 Rece Channel with HTTPS Transport Protocol.
PI Receiving the data from ECC and while sending the data from PI to Third Party Partner getting below error .Please help me on this issue.I will appriciate you .
Error:
Message could not be forwarded to the JCA adapter. Reason: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: java.io.IOException: key inappropriate for algorithm., SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: java.io.IOException: key inappropriate for algorithm.
Thanks,
Aadi
Hi Harikumar,
Thanks for your reply, now i am getting different error,
Could not deliver as2 message to partner: java.net.SocketException:
Connection reset # null
Please can you help me on this issue.
Thanks,
Aadi
Similar Messages
-
AS2 connection Error 403 / 400
Hi ,
We are working on AS2 interface,
1.. Sending delivery schedule from Backend - > PI AS2-> 4PL External system ====> This Works
2.. Sending Invoice from 4PL External system -> PIAS2 -> Backend === > This does not work
When sending data from 4PL to PI we are getting error as
"Error" "403 Forbidden;Source file not deleted." ,
if we also get error
Error" "400 Connection Failed (VLProxy java.net.ConnectException: Connection timed out: connect);Source file not deleted."
Kindly help!
Best Regards,
BijalFor 403 error
check these configurations
This error may have different reasons:
a) You or your partner has entered an incorrect AS2 ID for one of the involved parties.
b) A valid sender agreement is missing.
c) There are more then one AS2 sender agreements with the same sender AND receiver party.
d) The corresponding inbound channel is set to inactive. -
Seeburger AS2/SSL Connectivity Error
Dear SAP experts,
I would need your guidance on this one regarding the error that I am getting in our AS2 connectivity with Trading Partner.
The scenario is from SAP XI to Trading Partner.
We are using HTTPS connection. I've already uploaded the SSL certificate of the Trading Partner in the SAP XI Keystore and i've tried to trigger IDocs from XI to TP.
However, i am getting this specific error,
Delivery of the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: 500 Internal Server Error # , SEEBURGER AS2: 500 Internal Server Error # : javax.resource.ResourceException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: 500 Internal Server Error # , SEEBURGER AS2: 500 Internal Server Error #.
Can somebody advise what causing the error?
Kindly advise!
Thanks!
GodoHttp Error 500 are the most difficult to decipher
You will need to get you Basis to turn on AS2 logs and then check the trace the in the j2ee engine to understand what the error is. Most of the times; the error you see in these logs hits the nail on the head.
Regards
Bhavesh -
HTTP 403 Error in AS2 Connection
Hi,
Would really appreciate some inputs on this one. Just to give a background, we're tying to establish an AS2 connection between us and a 3rd party. The 3rd party tried to send a test message using our connecton details, but they got an HTTP 403 Error - Forbidden when trying to send a message.
I have confirmed the following:
- All the certificates (AS2 certificate, SSL, etc) needed for this has been uploaded in the 3rd party's system.
- The firewall has be opened for the 3rd party's sending IP address.
- We have also uploaded the 3rd party's certificates to our system.
- I checked the destination url of the message, and it seems that it is up as well.
As I am not very familiar and new to AS2, I'm currently stuck and running out of possible options.
Is anyone familiar with this? And, a possible cause and solution?
Thanks a lot!Hi Ivan,
Actually, we have verified our AS2 ID that is set up in the 3rd party already, and it should already be the expected one. Although, I think I will need to ask them the full details already.
I also tried the tool you gave (was helpful btw), and it seems that I was able to send a message successfully to the 3rd party. This was the log:
OUTGOING TRANSMISSION TO ... Originator: ... Recipient: ... Signature: on Encryption: on Compression: off MDN Requested: Asynchronous: http://localhost:8080/AsyncMDN.aspx MDN Signature: on Transmission was successful. -TIMESTAMP Tue, 14 Jul 2009 13:03:20 +08:00 [1247547800343]- Verification of receipt is pending an asynchronous MDN.
The problem is as this software is on my localhost. I'm not sure if it is practical to have the 3rd party test and send to this other connection for this dummy server as this won't be used anyway in the planned implementation.
So I guess the conclusion that I got from this is so far, the configuration that I currently did on the actual connection is supposedly to be correct, and that the problem is on the 3rs party's side? Is that right? -
Hi Gurus
I am testing AS2 connection with a partner using Seeburger adaptor. The partner is sending us edi files using AS2 HTTP protocol. In Seeburger workbench, I can see error that 'com.seeburger.ediint.edi.EDIMessageException: CANNOT DECRYPT MESSAGE (CERTIFICATE OR PRIVATE KEY MISSING)'.
My partner gets error that 'Unsigned MDN received, but signed MDN requested'.
I have given right certificate paths in Sender agreement. And the basis people say that the certificates are correct.
1. Please suggest how to solve this error?
2. In sender channel I have kept Asynchronous MDN settings values like Server Cert (Keystore) and Private Key blank. Is this the problem? What values should go in there?
Thanks in advanceHi Sunny,
The value for Private Key is missing in your configuration that may be the cause for this error.
>>>In sender channel I have kept Asynchronous MDN settings values like Server Cert (Keystore) and Private Key blank. Is this the problem? What values should go in there?
The Value that should go into the Private key area will be in the following format:
TRUSTED\<Keystore_View>\<Kestore_Entry>
Here, TRUSTED is a constant.
Keystore View: will be the keystore view value for your party's certificate entries from NWA.
KeyStore Entry: will be the keystore entry value for your party's private key from NWA.
Please check in NWA or with your BASIS team about the values for Kestore View and Keystore Entry and use the same.
Hope this helps.
Regards, Gaurav -
Hi,
I'm trying to test AS2 connection with External system and got some errors.
I'm able to send message successfully to the external system with MDN Mode Synchronus with out any errors and got the MDN back, I changed the MDN mode to Asynchronus and got the below error. Do we need to do any extra configuration for Asynchronus mode MDN?
Waiting for your valuble suggestions.
Error message : Error in unkown channel: (No session available) >> Error type: COMMUNICATION_ERROR >> Error date: 9/23/10 2:19 PM >> Description: 500 - Internal Server Error: Error while handle incoming request: java.lang.NullPointerException: while trying to invoke the method java.lang.String.toUpperCase() of an object returned from com.seeburger.as2.tasks.result.MDNDecomposerResult.getMdnOriginalMessageID() [9/23/10 2:19 PM]
Thanks,
KishoreHi,
Sorry for the late reply.
Receipt Delivery Address : Enter the URL of yr own AS2.
Yes, I specified our AS2 address as http://xxxx:50000/SeeburgerAS2/AS2Server
Time Out: What you have given.
10 min
In case of asynchronous MDN mode, an Report channel and Sender agreement always have to be configured also when u201CRefer to XI systemu201D is disabled
Yes, I have created Sender agreement and Sender communication channel with Message protocol as Reports.
Thanks,
Kishore -
Hi,
I am new AS2 connection settings. I just wanted to know is it possible to pick up a file from a folder and send it via AS2 to the Partners VAN ?
I have done with the Scenario with file adaper as sender service and As2 adapter as Reciever service .
Will it work ?
Thanks
LaksHi ,
Iam still getting the error messge
"Could not deliver as2 message to partner: 401 [ISS.0084.9004] Access Denied # null"
any idea why i am getting this error message ?
I haven't used Basic Authentication in Receiver AS2 Communication channel ? IS it because of it ?
I checked the detailed error in Runtime Workbench
the error is
Unable to forward message to JCA adapter. Reason: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: 401 [ISS.0084.9004] Access Denied # , SEEBURGER AS2: 401 [ISS.0084.9004] Access Denied #
Exception caught by adapter framework: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: 401 [ISS.0084.9004] Access Denied # , SEEBURGER AS2: 401 [ISS.0084.9004] Access Denied #
Delivery of the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: 401 [ISS.0084.9004] Access Denied # , SEEBURGER AS2: 401 [ISS.0084.9004] Access Denied # : javax.resource.ResourceException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: 401 [ISS.0084.9004] Access Denied # , SEEBURGER AS2: 401 [ISS.0084.9004] Access Denied #.
Can anyone help ?
Laks -
Data Federator data source not available causes Universe Connection error
I created a Data Federator project that connects to 20 servers across US and Canada. All data sources are SQL Server 2005. The DF project maps 40 source objects into 4 target objects. I created a universe based on the DF project and we have been quite pleased with Webi query response. Today one of the source servers was taken off line and this generated a connection error when trying to access the universe (not trying to access the data source that failed). We do not want the universe connection to error when one source server is not available u2013 is that possible?
If the answer is no then I see us abandoning what appears to be a great solution for real time distributed reporting and resorting to ETL and moving data.Hi Chapman,
Can you be little elobrate on what you have done to solve the issue.
Thanks,
Dayanand -
RFC connection Error in SLDCheck
Hi All,
I am trying to logon to Integration builder for that i getting the ESR builder address is not maintain. for this i have chk in SLDCheck t code ,there i am getting LCRSAPRFC connection error.I have test the RFC connection in that i am getting the
the error in register server program
Error Details ERROR: program LCRSAPRFC_XID not registered
now wht i have to do for troubleshooting
RegardsThanx for reply
when I test connection to Connection Test SLD_UC error
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program SLD_UC not registered
Error Details LOCATION: SAP-Gateway on host sapdevpi / sapgw00
Error Details DETAIL: TP SLD_UC not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 62
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1778
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 701
Error Details TIME: Fri Jan 8 11:05:42 2010
Error Details VERSION: 2
RFC SLD_UC is connection T
Gateway Host sapdevpi
Gateway server sapgw00
same error with
Connection Test SLD_NUC
Connection Test SAPSLDAPI ( program Id SAPSLDAPI_DPI )
Connection Test SAPJ2EE
In Connection Test LCRSAPRFC error program id LCRSAPRFC_DPI
Logon Cancel
Error Details max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' : cmRc=17 thRc=45
Error Details ERROR: max no of 100 conversations exceeded
Error Details LOCATION: CPIC (TCP/IP) on host sapdevpi
Error Details COMPONENT: CPIC (TCP/IP) with Unicode
Error Details COUNTER: 82
Error Details MODULE: r3cpic_mt.c
Error Details LINE: 10791
Error Details RETURN CODE: 466
Error Details SUBRC: 0
Error Details RELEASE: 701
Error Details TIME: Fri Jan 8 11:12:56 2010
Error Details VERSION: 3
Regards
shahid -
RFC connection error between Netweaver 7 EHP1 and Ides ECC6
Hi Friends,
I try to create source system in BI from Netwever EHP1 to IDES ECC6 EHP3.
During the creation I get a connection error, says. check connction parameter.
I checked the parameter, everything is fine. Server, System and number.
When I went to the SM59 and created a connction.
I.E. with the same parameter like system = 06 and server = compi9 gave client 800 etc.
The Host name is resolved to 192.168.2.111 wich is OK.
But when I run the connection test it shows me "ERROR: partner '80.156.86.78:sapgw06' not reached"
I have no idea where this IP '80.156.86.78" is comming from.
No Problem with the opposite way, from Ides to NW and login to the System is OK too.
Can anybody help me with this problem.
RG. JimbobHi,
What is the next screen that comes up when you click on remote logon.
If no screen comes up then:
Check the user type of the user id used for this RFC.
It should be either dialog or service user for able to remote login.
If it open a new window and asks for password, then its excatly password issue.
Also make sure that the password is in numeric and correct.
Also make sure that the current user check box is unchecked.
Even if it dosent work, delete the connection and create again.
Please award points if helps.
Thanks
Santhosh -
Dear All,
when i connect our BI System to R/3 system via RFC in SM59 ,i am getting following error in BI system and also The problem occur in particular instance .(Other instance working fine in BI system)
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: timeout during allocate
Error Details LOCATION: SAP-Gateway on host chwslp05 / sapgw01
Error Details DETAIL: no connect of TP sapdp15 from host sapp3b.eame.syngenta.org after 20 s
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 162003
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1973
Error Details RETURN CODE: 242
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Mon Apr 27 14:29:33 2009
Error Details VERSION: 2
Any one please suggest.
Thanks,
Thirumoorthy.mostly your gateway servicve is not working check smgw tcode on that instance
you can do this goto sm59->select the instace execute tcode smgw
easy way is restart the instance
it will start working
Samrat -
RFC Connection error in SM59 for SAP J2EE
Hi All,
i am getting the following error description while testing the connection for
SAP J2EE ...
Connection Test SAPJ2EE
Connection Type TCP/IP Connection
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program sapfallback not registered
Error Details LOCATION: SAP-Gateway on host filip / sapgw00
Error Details DETAIL: TP sapfallback not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 1483
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1694
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Tue Mar 31 02:44:35 2009
Error Details VERSION: 2
Help me resolve this
Regards,
Mahesh.Hi,
Please follow this steps:
Creating RFC Destinations in the ABAP and Java Environment
You need to create the following RFC destinations in transaction SM59 (ABAP) and the Visual Administrator (Java):
u2022 AI_RUNTIME_JCOSERVER
u2022 AI_DIRECTORY_JCOSERVER
u2022 LCRSAPRFC
u2022 SAPSLDAPI
Depending on your client settings, it may be necessary to be logged on your SAP Exchange Infrastructure host as SAP system user with the authorization to maintain customizing tables and to release transport orders. Note, that user "SAP*" or "DDIC" does not have these authorizations.
Maintaining the RFC Connections (Transaction SM59)
1. Log on to your SAP Exchange Infrastructure central instance host.
2. Call transaction SM59.
3. Choose Create.
4. Enter at least the following:
RFC destination: AI_RUNTIME_JCOSERVER
Connection type: T
Description: <your description>
5. Choose ENTER
6. Choose the tab Technical settings and do the following:
a. Select Registered Server Program
b. In the Program ID field, enter: AI_RUNTIME_<SID> where <SID> is the SAP system ID of your Integration Server host. Use uppercase letters only.
c. Enter Gateway host and Gateway service of your Integration Server host. To find out the required parameters:
a. On the Integration Server host, call transaction SMGW
b. Choose Goto u2192 Parameters u2192 Display (see entries for gateway hostname and gateway service)
7. Choose tab Special Options and select the flag Unicode in the box Character Width in Target System.
8. Save your settings.
9. Repeat the steps 3 u2013 8 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
Program ID: AI_DIRECTORY_<SID>, where <SID> is the SAP system ID of your SAP XI host
LCRSAPRFC
Program ID: LCRSAPRFC_<SID>, where <SID> is the SAP system ID of your SAP XI host.
SAPSLDAPI
Program ID: SAPSLDAPI_<SID>, where <SID> is the SAP system ID of your SAP XI host.
10. Leave the transaction SM59 open for later tests.
J2EE Configuration for the Destinations (Visual Administrator)
1. On your SAP Exchange Infrastructure central instance host, start the J2EE Engine administration tool.
2. Choose Cluster u2192 Server u2192 Services u2192 JCo RFC Provider
3. In the section RFC destination, enter exactly the same program ID and gateway options for AI_RUNTIME_JCOSERVER that you used in the step Maintaining the RFC connection above. Additionally, set the number of processes to 10.
4. In the section Repository, do the following:
a. Enter the parameter for the SAP XI host: Application Server, System Number, Client and Language.
b. For User and Password maintain the login parameters for the user SAPJSF.
c. Select the flag Unicode.
6. Choose Set.
7. Repeat the steps 3 u2013 6 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
u2022 Corresponding values from SM59
u2022 Number of processes: 10
LCRSAPRFC
u2022 Corresponding values from SM59
u2022 Number of processes: 3
SAPSLDAPI
u2022 Corresponding values from SM59
u2022 Number of processes: 3
Testing the RFC Destination
After you have maintained all RFC destinations in both the ABAP and Java environment, you can check all the connections above as follows:
1. Call transaction SM59 again.
2. Open your RFC destination.
3. Choose Test Connection. No error should be displayed.
This will solve your problem.
Thanks
Laxmi Bhushan -
RFC connection error (VPN-access)
Hi!
I have the following error for the RFC connection:
The RFC connection is setup as follows.
/H/10.101.7.1/S/3299/H/10.151.6.194
10.101.7.1 = IP of our SAP Router
10.151.6.194 = IP of customer system
The RFC connection is established:
SAP Router (intern) --> Target systems
The error is:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: partner not reached (host 10.151.6.194, service sapgw20)
Error Details LOCATION: SAP-Gateway on host bksapp01 / sapgw20
Error Details DETAIL: NiPConnect2
Error Details CALL: SiPeekPendConn
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 592
Error Details ERROR NUMBER: 10060
Error Details ERROR TEXT: WSAETIMEDOUT: Connection timed out
Error Details MODULE: nixxi.cpp
Error Details LINE: 8777
Error Details RETURN CODE: -10
Error Details SUBRC: 0
Error Details RELEASE: 640
Error Details TIME: Thu Jun 19 10:42:42 2008
Error Details VERSION: 37
Can some one help to solve the problem?
Thank you very much
ThomHi
Change the saprouter string to
/H/10.101.7.1/S/3299/H/10.151.6.194/S/32<system number>
and try !!! -
RFC connection error when registering PROGRAM ID.
Hi,
I created a RFC connection of type T.
I gave the following parameters ->
gateway host: hostname and then ip-address
gateway service: sapgwxx
Registered program id: xxx
It is giving me the following error:
Error Details Error when opening an RFC connection
Error Details ERROR: program sapgwxx not registered
Error Details LOCATION: SAP-Gateway on host <hostname> / sapgwxx
Error Details DETAIL: TP sapgwxx not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 2696
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1777
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Can anyone help me in troubleshooting the issue.
Also I am not able to register this program id in Visual Admin -> Services -> JCo RFC Provider. Here it is giving me an error. Can anyone guide me in this?
Points to be rewarded for any kind of small help.Thanks Ramesh.
I followed the blog. Here are the steps that I did.
RFC destination:
1. To create the RFC go to TCODE: SM59 <b>-> Done</b>2. Create new destination of type T (TCP/IP) <b>-> Done</b>
3. Make sure you select Registered Server Program option before writing your program ID <b>-> Done</b>
4. Write you program ID (remember it's case-sensitive) <b>-> gave the SID name</b>
5. In the gateway host and gateway service write the values of your "Application system" - business system (not the XI server) <b>-> Typed the gateway hostname and gateway service "sapgw<instance no>", that I got from SMGW.</b>
But still I face the same problem. It get the following error:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program <SID name> not registered
Error Details LOCATION: SAP-Gateway on host xxxxx / sapgwxx
Error Details DETAIL: TP <SID Name> not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 2719
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1777
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Thu Nov 1 10:39:43 2007
Error Details VERSION: 2
Kindly help me out. -
RFC Connection Error during Web AS ABAP Database Instance
I keep getting RFC Connection error installing the database instance. The following are the pertinent logs:
INFO 2007-05-09 20:10:04
Working directory changed to C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\MSS\UC\DB.
INFO 2007-05-09 20:10:04
Output of C:\usr\sap\X22\SYS\exe\run\r3trans.exe -u 1 -i "C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\MSS\UC\DB\mssprocs640.dat" is written to the logfile r3trans.exe.log.
INFO 2007-05-09 20:10:22
Execution of the command "C:\usr\sap\X22\SYS\exe\run\r3trans.exe -u 1 -i "C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\MSS\UC\DB\mssprocs640.dat"" finished with return code 0. Output: This is C:\usr\sap\X22\SYS\exe\run\r3trans.exe version 6.13 (release 640 - 03.06.05 - 17:04:00).unicode enabled versionC:\usr\sap\X22\SYS\exe\run\r3trans.exe finished (0000).
INFO 2007-05-09 20:12:23
RFC parameter CLIENT set to value 000.
INFO 2007-05-09 20:12:23
RFC parameter USER set to value DDIC.
INFO 2007-05-09 20:12:23
RFC parameter LCHECK set to value 1.
INFO 2007-05-09 20:12:23
RFC parameter PCS set to value 1.
INFO 2007-05-09 20:12:23
RFC parameter LANG set to value EN.
INFO 2007-05-09 20:12:23
RFC parameter ASHOST set to value cix22.
INFO 2007-05-09 20:12:23
RFC parameter SYSNR set to value 00.
INFO 2007-05-09 20:12:23
RFC connection information checked successfully.
ERROR 2007-05-09 20:12:24
FRF-00007 Unable to open RFC connection.
I tried the following fixes spread across different threads in this Expert Forums:
1. Someone said network problem. I rebooted, restarted the install and even redo it.
2. Another suggestion was to use caps on the password. Didnt work.
3. One suggestion was to update the keydb.xml file. However, I could find such property name:
search for the table t_SAPComponent_SAPSystemLogon_SHARED
then look for <fld name="pPW">, <properties>,
<property name ="GUIENG_USER_INPUT" and set the value
"GUINEG_TRUE" to "GUIENG_FALSE".
4. I even used the ddic password 19920706 which is supposed to be the default.
5. Restarted the instance and applied all the fixes above.
Does anyone know what is going on base on the logs above? Thanks.try moving all your install disk onto local file system then rerun the install. That might work....
Maybe you are looking for
-
Have to sign into my account each time I launch an app
Hi, each time I launch an app, I have to sign in, to accept terms of contract, or I get a message saying this is a demo version. I am fed up with this !!! I have a legal version, and I don't want to sign in every day. Used it on OSX before, and there
-
Hi Guru I am facing a problem where i am unable to fetch records Table : Lami fields workordernom , reelno Table : slitting_d fields : workordernom , reelno I am updating a SLITTING_D table with Lami table where the records are not matching. Under on
-
Need WXP drivers for a Portege R500-106
Where can I find XP drivers for a Portege R500-106? Driver download page only has XP WLAN driver and no others.
-
All Can someone help me with this, i am trying to connect to a remote EJB and i am getting the following i setup have setup the security manager and the client.policy file but still i get access denied (java.util.PropertyPermission java.security.poli
-
Hi, As i am new to 12i EBS i don't know any thing in it Just i have installed the 12i Vision database in linux And i know how to start and stop the db and apps In my installation folder i have noticed that inside /v01/oracle/VIS 3 folders are there (