AS2 messages using VAN failed

Hello All,
In our prod environment, AS2 message failed in Adapter engine with the below error ,while transmitting to VAN network.
Error log in AE :
MP: Exception caught with cause javax.resource.ResourceException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: >> Description: com.seeburger.jftp.app.exception.FtpExceptionHardProcessingError: File processing error while doing EDI send: ReplyCode: 16 ReasonDescription: EDI heade OperationDescription: EDI processing terminated.>> Details: com.seeburger.jftp.app.exception.FtpExceptionRethrowError: Error in session: CAUSED BY: com.seeburger.jftp.app.exception.FtpExceptionRethrowError: Error while executi
Could any one provide inputs on this .
Regards
Vidya Sagar

Hello,
R u able to send other messages through the same AS2 adapter.
If yes please check the content of the data u r sending.
Thanks and Regards
Hemant

Similar Messages

Correlate MDN to AS2 message using an integration process

Hello,
I had a similar question in a previous thread but closed it as the problem might have not been to clear.
Problem is that we have to use BPM for an AS2 scenario and correlate the MDN back to the process as we need BPM functionalities such as error handling and time-outs as well as some data enrichment.
Problem is even when I request the MDN synchronously on Adapter Level it is delivered as asynchronous message back. So I need to figure out how to correlate it.
MDN contains the messageID so I tried to use the messageID of the original message as correlation. However problem is that a new message ID is assigned when the message is sent by the integration process and the second on is used then as ID in the MDN.
It seems to me that it is therefore not possible at alle to correlate the MDN? However this is a definitive requirement so I am really stuck at the moment.
Do you have any idea?
Thank you very much!

Hello,
well, actually the correlation itself would work as I extract the messageID in a transformation step and then activate the correlation in a send step.
If I check the flag "Refer MDN to XI" in AS2 receiver channel the MDN is delivered back to the integration server and the original messageID is then part of the MDN message payload.
However, and that is the big problem, the MDN uses the second messageID that is created when sending the message from the integration process (and not the first one when the message is sent from sender and process by the integration process).

Error during AS2 message composition

Hello all,
I want to send AS2 messages using the Seeburger adapter, but get the following error
Unable to forward message to JCA adapter. Reason: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Could not retrieve certificate TRUSTED/AS2_MHC/MHC_AS2_DEV., SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiExcep
Does anyone have an idea why the certificate cannot be retreived?
Thanks.
Marco

Hi,
did you set the view_creator role of the keystore? (check SeeMasterConfigurationGuide)
After setting the view_creator role donu2019t forget to restart the J2EE engine.
Is the certificate availabe in the keystore?
regards,
Daniel

Failed to verify AS2 message Reason message-digest attribute value

Hi All,
I have scenario from AS2---->PI--
>ECC(AS2 to Proxy) .I tested in QA system successfully but messages not reached to PI system.Communcation channel montering error message is Failed to verify AS2 message. Reason: message-digest attribute value does not match calculated value (Software version: 1.0.2). This scenario working fine producation server using with receiver file adapter.After transported from QA to PROD error got occured.Please provide your inputs on this issue
Regards,
Ramesh

Thank you,
I've followed all the steps in the link for the section : For a new wallet, please follow.
SSL is not used, the B2B sends to a proxy server which uses SSL to the Trading Partner.
This is a future production system; the same setup and configuration has been successfully used in development and test.
The configuration all looks the same between environments, but dev and test work while this fails.
The previous configuration did not have the TP's public cert in the wallet, so I added it according to the link.
However the same error occurs.
Is there any chance this behaviour is related to this : metalink docid : 803466.1 / Oracle B2B certificate for ebMS will expire July 17 2009
This is AS2, not using ebXML, but I do see references to the phaos security tool kit in the logs.
Currently all environments use MLR#7.
Edited by: tdba2 on Aug 1, 2009 11:58 PM

TS4002 Can you tell me if the smtp settings have changed recently? I use me/ICloud mail with Outlook and can not receive emails but outgoing emails are no longer working. Error message is: Authentication failed because Outlook doesn't support any of the

I am able to receive messages on my IMac using Outlook but am unable to send. I've had no trouble in the past but began receiving the following messages today.
5.7.8 Bad username or password (Authentication failed).
Authentication failed because Outlook doesn't support any of the available authentication methods.
I am able to send messages using this account on my IPhone and IPad so the IMac is the only place I am having issues. Any advice?

Here are the correct settings. They have never changed since iCloud debuted a year ago.
Server information
IMAP (Incoming Mail Server) information:
Server name: imap.mail.me.com
SSL Required: Yes
Port: 993
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
SMTP (outgoing mail server) information:
Server name: smtp.mail.me.com
SSL Required: Yes
Port: 587
SMTP Authentication Required: Yes
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
Note: If you receive errors using SSL, try using TLS instead. SSL is required for both IMAP and SMTP connection with iCloud. POP is not supported by iCloud.

I have a tried to format my seagate free agent 1TB external hard drive so I can use it, but I keep getting an error message saying it failed. Can n e 1 help me plz

I have a tried to format my seagate free agent 1TB external hard drive so I can use it, but I keep getting an error message saying it failed. Can n e 1 help me plz

This article has a link for more information on finding your profile directory: [[Fix the "Could not initialize the application's security component" error message]]. On Windows 7, you can try this (either in a Windows Explorer window address bar or from the start menu search box):
%APPDATA%\Mozilla\Firefox\Profiles
You may see one folder in there and that's the one you want. If you see more than one, look for the one with the most recently modified files.

We use Adobe Acrobat 10. When I try to download the most recent update, I get the error message 1608 download failed. HOw do I fix this.

We use Adobe Acrobat 10. When I try to download the most recent update, I get the error message 1608 download failed. How do I fix this?

uninstall acrobat, clean (if windows os), Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs and then reinstall.

When publishing a captivate I get the message "Swf compilation failed. Note: Please verify if any of the actionscript keywords is used as user variable name." and it won't allow me to publish the Captivate, can anyone help?

When publishing a captivate I get the message "Swf compilation failed. Note: Please verify if any of the actionscript keywords is used as user variable name." and it won't allow me to publish the Captivate, can anyone help?

Hi There,
Can you tell me the Operating System and Captivate version you are using?
Also can you confirm if you are getting this issue will this one project or all the projects? Try to copy paste this project on a new blank project and then try to publish.
Regards,
Mayank

I have lost the use of my extension pannels, and need help recovering the use. I get a message that extensions failed to load. Why?

I have lost the use of my extension pannels, and need help recovering the use. I get a message that extensions failed to load. Why?

I've had that before when on a really slow Internet connection.

When I try to make a video call using FaceTime it get a message saying "FaceTime failed

Trying to make FaceTime video call and get the follwing message immediately, "FaceTime failed"

FaceTime for Mac: Troubleshooting FaceTime - Apple Support

Connect to message server host failed Connect_PM TYPE=B MSHOST=hmsnsw00

When i deploy "TutWD_FlightBooking" Sample WebDynpro application I get following error.
I have following setup.
NetWeaver developer Studio (NWDS) Version: 2.0.9
J2EE server running on the same machine where i have NWDS Version: SAP J2EE Engine/7.00 PatchLevel 105053.42
SLD Version: 7.0009.20060621180635.0000
Build: 20060622 2041, Depot: //sdt/com.sap.lcr/645_SP_REL, Changelist: 345651
ABAP R/3 system is on remote system (accessing clients R/3 system) on the network.
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=hmsnsw00 GROUP=PUBLIC R3NAME=DEV MSSERV=sapmsDEV PCS=1 ERROR timeout while pending for route completion TIME Tue Mar 13 12:04:14 2007 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -12 DETAIL NiErrSet COUNTER 1
    at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:457)
    at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:989)
    at com.sap.mw.jco.JCO$Client.connect(JCO.java:3193)
    at com.sap.dictionary.runtime.mdi.DataProvider.<init>(DataProvider.java:90)
    at com.sap.dictionary.runtime.mdi.DataProvider.<init>(DataProvider.java:122)
    ... 62 more
I get same error message when i test the JCo Metadata connection, Model data connection works fine.
The message server value under WebDynpro content admin is created with right values as i checked with Basis person.
My service file in C:/windows/system32/drivers/etc has entries for both J2EE stack entry and ABAP stack (on remote server) entry with port numbers.
When i ping the ABAP (remote server) from my machine command prompt I get response.
I am running out of options. I really appreciate your inputs.
Ramesh

Hi, I think this might have todo with the fact that your Java stack wants to connect with a server from the same logon group called "PUBLIC".
Please make sure you added the same logon group "PUBLIC" to the ABAP Server. Try transaction SMLG.
Also as posted above the SLD needs this info aswell.
After using the transaction SMLG, log in and out 5 times in a row to your ABAP stack using SAP GUI. This might actually force an update to the SLD.
Greetings,
Robbert
Message was edited by:
        Robbert van Waveren

Could not deliver as2 message to partner: 1000 # null

Hi,
I'm trying to send a message to a partner using AS2, I've already defined the MDN and can see the message in SXMB_MONI pending.
When looking to the Seeburger I can see the message with status " Error on send, will be retried " with the following error:
Could not deliver as2 message to partner: 1000 # null
I didn't find any information about this 1000 error, so I went to communication channel (RWB) Audit logs and got:
Delivering the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: 1000 # , SEEBURGER AS2: 1000 # .
In NWA log Viewer (Alert Java) I have:
error occured! Caused by: com.seeburger.http.base.SSLConnException: response of server was ''
at com.seeburger.http.base.SSLApacheConnection.checkHttpResponse(SSLApacheConnection.java:3759)
at com.seeburger.http.base.SSLApacheConnection.doPost(SSLApacheConnection.java:964)...
and
Error while executing AS2 plugin: Could not deliver as2 message to partner: 1000 # null [LOC: Error while executing AS2 plugin: Could not deliver as2 message to partner: 1000 # null.execute] Caused by: java.lang.Exception: com.seeburger.as2.exception.AS2PluginRetryException: Could not deliver as2 message to partner: 1000 # null
at com.seeburger.as2.AS2Plugin.execute(AS2Plugin.java:331)
at com.seeburger.as2.AS2Plugin.execute(AS2Plugin.java:202)
at com.seeburger.frame.core.FrameWorkListener.syncNewData(FrameWorkListener.java:530)
What configuration do I have to make?
Thanks,
Pedro

Hi
This is a configuration problem at your AS2 partner side. Please check whether the configuation at partner side is correct or not.
Also check the receiver AS2 url , valid or not
Regrads,
Dhanish

"Cannot send message using the server....."

Hi all,
Considering the nature of the problem I am about to relate I would have to say at the outset that I would be very very surprised if other people have not come across this problem, so here goes...
We have around 60 users of Apple Mail from both 10.4 and 10.5, so varying degrees of versions of Apple Mail however most if not all are updated to 10.4.11 and 10.5.2.
We have been plagued with people being frustrated about emails bouncing back with an immediate error which is basically the following...
"Cannot send message using the server smtp.xxx.com:user
Sending the message content to the server failed.
Select a different outgoing mail server from the list below etc etc"
I am sure a lot of you have seen this error.
However, it is totally random but I am at the end of my tether with it. It generally revolves around emails with attachments and can be totally random. I was trying to send a screenshot today, very small screenshot, using the Apple-Shift-4 technique, sent the .png file, then saved it out as a .jpg, nothing. Tiny file, around 5k. Got the error above, took it out, sent no problem. Other similar files on the desktop refused to send but a .pdf did. I then thought it might be our server, so sent teh same attachments using my .mac account. Same result and failed to send. Reports from other users in our group show that they too get random results, maybe moving the attachment in the email makes it go, sometimes putting it before your signature, sometimes putting your signature copied and pasted in so many times makes it work, all sorts of methods but all resulting in the same conclusion, Apple Mail can be very unreliable.
We have even migrated some users to Entourage and the problem disappears. Even to Thunderbird, but those users miss the search capability as it is quicker and more reliable. So they want to go back.
Considering I have been struggling with this issue back in the day when we were on the Apple Mail related version in 10.4 I was hoping that the version released in 10.5 would remedy the problems. Sometimes I feel it has just got worse.
Is anyone else experiencing this sort of difficulty in Apple Mail, I really feel isolated and at a loss with how to remedy this for so many users.
If anyone can share their experiences and how they have got around similar issues in Mail I am all ears and open to any suggestions.
Thanks everyone for taking the time to read through this. There is more but the experiences are so random it is not worth trying to put it all down.
Thanks again.
Gerry McCoy

I went in to Connection Doctor and. oddly enough, for this Mac account it said I was on Port 25. Si I changed it to Port 587 and saved the changes.
Still, I have the same problem with the same error messages.
I go back to the mail preferences > Accounts > Advanced and it shows Port 143 still there grayed out.
What about SSL - it's not checked.
Odd that this problem only seems to be from one .mac account emailing to another .mac account. Could the server be down?

Cannot send message using the server (null)

i use mail 2.1.
i have a .mac account and have three other email accounts attached to my mail account.
lately, i cannot send any email.
the switchiing ports fix hasn't helped either.
this is the error message:
CANNOT SEND MESSAGE USING THE SERVER (null)
The server response was: 5.1.0 <email [email protected]>...
From address does not match authentication.
Use the pop-up menu below to try a different outgoing mail server. All messages will use this server until you quit Mail or change your network settings.
Message from: email <[email protected]>
Send message using: [there is a combo box here with all the four accounts servers listed]
no matter which one i pick it doesn't work and no email is sent.
anyone have this error before? or now how to fix it?
i'd be appreciative.
thanks
1.67 GHz Power PC PowerBook G4 Mac OS X (10.4.6) Sony HDR HC3 HD HandyCam MiniDV

I was having a similar problem (don't feel like typing all the details)
I was about to to delete my com.apple.mail.plist, when finally it hit me.
I ran ethereal (again, I'm sorry, but learning how to use ethereal is a topic unto itself). Following the TCP stream (ie. looking at the smtp messages being sent back and forth) I came across two problems. For some reason my port number was set to 567 or something like that, when it's supposed to be 25, as I had originally set it to.
Once I corrected the port number I started receiving an error message from the smtp server. It said the return email address could not be authenticated. (using xyz.com as an example) The correct return email address was supposed to be [email protected], but for some reason it was changed to john@xyz in the account settings.
Anyway, to get to the point, another thing to check is that your return address has been set correctly, and if all else fails, make sure you have X11 installed and use fink to install and run ethereal. This will let you know if you are actually connecting to the server, and will show you any error messages.
PS. I think this problem started occurring with the last update made to mail. I believe it somehow corrupted my settings. This would explain how my port number could have been changed to the default port number of .mac mail.

When I try to open Firefox I receive this message, "Application has failed to start because ssl3.dll was not found." HELP!

I've been using Firefox for about 3 years. Today, I ran a scan of my computer Webroot Anti Virus and deleted all "risky stuff" they checked. Don't know if this is a coincidence but right after the scan I could not open Firefox. I receive the message, "Application has failed to start because ssl3.dll was not found. Reloading application may remedy this." I reloaded Firefox, the current version, clicked on open and received the same message. I've reloaded Firefox 3 more times with the same results. Now I need HELP.

See if you can make Webroot restore that file in the Firefox program folder (C:\Program Files\Mozilla Firefox\).<br />
If not then you need to reinstall Firefox and make sure that Webroot doesn't do that another time.
You can find the latest Firefox release here:
*Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

AS2 messages using VAN failed

Similar Messages

Maybe you are looking for