As2 protocol used in SAP Xi

Please  let me know any prdefined steps from SAP implementing AS2 protocol.

Hi,
Seeburger EDI Adapter provides an EDI solution on internet via HTTP or AS2 to replace the expensive VAN. It provides some pre-built mappings for IDOC to ANSI X12(810,850,855,856 etc.,) and Idoc to EDIFACT(ORDERS,DESADV,INVOIC etc.,) and has the ability to build your own. These pre-defined mappings transform the IDOC-XML to EDI-XML format.
Please go through the following links which clearly explains what you want and it also helps you in understanding the same in depth:
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Please see the below thread.
Seeburger Adapter
seeburger adapter
Thanks
Swarup

Similar Messages

  • Send/receive IDOCs to SOLMAN system using AS2 protocol!

    Hi All,
    I want to send/receive IDOC file to/from web based SOLMAN system. Currently I'm using FTP server to send/receive IDOC file.
    As of now the current process is to send the IDOCs from ECC to FTP server and from FTP to third party and vice-versa. But due to some constraints, I'm bound to use web based SOLMAN system. Please, can you let me know how to send/receive IDOC files to SOLMAN. Is there standrad FM/method to connect to SOLMAN from ECC as in case of FTP we have FM 'FTP_CONNECT'. Heard that same functionality in case of SOLMAN can be achieved  through AS2 protocol.
    Kindly help.
    Thanks.
    Regards,
    Mukesh

    Hello Patrice
    We have same issue. Is it possible to use IDoc (XML) directly with SAP 5.0 with SOAP (HTTP) without XI?
    Since your que is three years old, I'm sure you must have found some method for this.
    We'll highly appreciate your help.
    Regards: Gaurave

  • AS2 protocol

    Hi,
    For the 3rd party system to support AS2 what all are the pre-requisites for it?What all the softwares 3rd party system should have to support AS2 protocol?
    In XI we are using See Burger AS2 adapter.
    Best Regards,
    Harleen Kaur Chadha

    Hi,
    Try this pdf available in service marketplace. It has all the details that you are looking for...
    https://websmp202.sap-ag.de/~sapidb/012006153200000124082007E/SAPXI30_AS2Adapter.pdf
    Applicable for XI 3.0
    Regards,
    Abhishek.
    Edited by: abhishek salvi on Dec 4, 2008 10:57 AM

  • AS2 protocol configuration

    Hi,
    I'm using 11.1.1.5 and been using the ebXML protocol using a custom XML document and I can get it to work without any issue.
    I am playing with using the same custom XML document using AS2 as the channel and can communicate with the Trading Partner environment as I am getting a this error:
    B2B-50032 B2B exchange protol negative acknowledge received.
    On the Trading Partner environment, I am getting this error:
    Document protocol identification error.
    I checked other threads and they are saying that it might be an invalid document. I know it is valid because it did work in the ebXML channel. Can anybody point me to any sample of setting up AS2 messaging. I followed the same procedure as setting up ebXML but there might be other configurations I missed.
    Regards,
    Robert

    Document protocol identification error.Have you defined identification xpath in the document definition at receiving side? If no then please do so and redeploy the agreement and then retest.
    To understand the xpath expression which is used in B2B, please refer section "8.1.1 How to Configure the XPath Expression for a Custom XML Document" at -
    http://docs.oracle.com/cd/E28280_01/user.1111/e10229/b2b_documents.htm#CHDEFFEH
    Regards,
    Anuj

  • OSB 11g - AS2 protocol - File exchange.

    Hi,
    I have to fetch a file or send a file from/to my client's server using AS2 protocol. We are using OSB 11g. I want to know if it can be done in OSB. I could not get any help from OSB developers guide or any other source. Could someone please provide me any document, link, tutorial on how to do this.
    Thanks,
    Sanjay
    Edited by: Sanjay Bharatiya on 24-Oct-2010 5:56 PM

    Hello Sanjay,
    AS2 is an exchange protocol which is better supported in Oracle B2B (a component of SOA suite). Can you let us know more about your use case and the version & release of products you are using?
    Drop a mail (id in my profile) to me with the details.
    Regards,
    Anuj
    Edited by: Anuj Dwivedi on Oct 25, 2010 12:18 PM

  • Protocols used in MI

    Hi ,
    I require some info. regarding the communication protocols used in MI i.e. MI uses only HTTP or is there any other ways through which a mobile device can communicate with the SAP server.
    regards
    shiva

    hi shiva,
    MI uses HTTP as its transfer protocol; also HTTPS is supported.
    regarding the data format, the base protocol is the GenericSync protocol and also
    the SmartSync protocol, an XML based protocol which works on top of GenericSync.
    the data format for both GenericSync and SmartSync are not published publicly,
    but you can trace it by looking at trace logs and by looking on the http raw data.
    if you have online connection, you can make use of JCo to communicate directly
    with SAP system. but this is however off the MI domain. still you can integrate it
    into your MI apps.
    hope this help
    jo

  • I would like to know how i can share my music using an UPnp protocole. I have an Imac but when i'm chosing the option share my file i can connect my mac to another network reader . it seems that the protocole used is not UPnp. I need this to be in UPnp.

    I would like to know how i can share my music using an UPnp protocole. I have an Imac but when i'm chosing the option share my file i can connect my mac to another network reader . it seems that the protocole used is not UPnp. I need this to be in UPnp. does somebody can help ?

    Google "upnp mac"

  • How to find what type of middleware product we are using in SAP CRM ?

    Hello All,
    Ca anyone help me in getting the information  for the following :
    1) How to find out what type of middleware product we are using in our Project? ( Currently our SAP CRM version is 4.0 and the middleware is using for R/3 to SAP CRM and vice versa)
    2) Do we have a product called u201CMessaging wareu201D used in SAP ?
    Kindly revert at the earliest .
    Cheers
    Sreedhar

    Hi Sreedhar,
    What you've mentioned is exactly the task of CRM Middleware, which sits on the CRM server and governs the data flow.
    By any chance are you trying to find out about DOE(Data Orchestration Engine) used by SAP NetWeaver Mobile ?
    maybe this link would help then:
    http://help.sap.com/saphelp_nwmobile71/helpdata/en/7f/c9391404c74fabb8ccc321bac64e8d/content.htm
    -Rohit

  • How to make use of SAP NetWeaver Visual Composer in business

    Dear Experts,
        Can anyone help me the use of SAP Netweaver Visual Composer benefits and how it can be used to get the integerated business reult. How it helps the organisation to get benefited and how it differs from other tools.
    Regards
    Veeraraghavan.S

    Hi,
    There is loads of stuff out there on visual composer.  Have a look at this link:
    http://wiki.sdn.sap.com/wiki/display/VC/VisualComposer7.0
    VC is supposed to allow employees with limited technical skills created web based applications which can then be used in the portal.  You do need some technical knowledge but it is more easier than developing code. 
    Nick

  • What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?

    Hi All,
    What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?

    Hi Jayachander,
    Have a look at these sap notes:
    For taking backup: Schedule from DB13 and get the exact command from Logs
    1841993 - SYB: How to schedule backups in DBA Cockpit
    1887068 - SYB: Using external backup and restore with SAP Sybase ASE
    How to restore DB
    1611715 - SYB: How to restore a Sybase ASE database server (Windows)
    Divyanshu

  • Using Standard SAP Tables in SAP Tables, clusters or functions connections

    Hi Gurus,
    I am trying to use Standard SAP table like MARA, MAKT.. etc. in my crystal designer. When i make a new connection using SAP tables, Cluster or Functions, these tables are not listed.
    Any configuration i have to maintain to list those standard table.?
    With Regards,
    Balachander.S

    Due to performance reasons there is  a limitation regarding the number of the dispplayed table names. Once you are in the connection/table browser select a table and invoke the context menu by pressing the right mouse button. Select Options and in the options panel you can use wildcards in order to limit the results to the desired range (eg. use MA% to get a list of tables starting with MA). After you close the options panel press F5 and expand the connection entry again.
    Regards,
    Stratos

  • Search help for Web Dynpro using the SAP-search help

    Hi,
    I’m trying to create a generic search help for Web Dynpro using the SAP-search help. It should working so, that I construct a Web Dynpro-component, that gets the data of the search help from the SAP-system, interpreted it and creates the ui-elements and the needed context generic.
    The mapping between the Input field of the customerview and the right search help is to be made with an xml-file, which contains the information: name of the view, the input field, the search-help-name and the name of the field that will be returned.
    The xml-file is reading from a helper-class. That helper-class contains any information, witch need the search help-component as well as the customer-component.
    The initialization takes place in the method wdDoModify of the customer. The call of the search help from the customer should be implement with an Action, witch is bound to a Button(create dynamic in the helper-class behind the input field).
    In a second foot should be create a plugin for eclipse, witch insert the used files (search help component, helper class, …) in the project. In addition it should create the call in the customer generic.
    It would be great if someone can give me a feedback!

    Hi Mike,
    The BlanketAgreement.exe is a reference to the executable that will be created when you compile the solution you created in Part II - Part III. I think there is a mistake in the tutorial because it asks you to name the project 'Blanket' which means that by default the executable will be called Blanket.exe and not BlanketAgreement.exe. The tutorial also misses the step asking you to compile the Blanket project before you go on to create an installer. You should compile your Blanket project in Release mode before creating an installer. By compiling the project you'll get a Blanket.exe file in the bin folder of your Blanket project which you then need to add to the installer per the instructions.
    SAP do offer development courses in some areas and there is training material here on the SDN and on the SAP partner portal (and maybe the customer portal as well). Try searching this forum for 'training' or 'tutorial' and you should get a few links. There's also a development certification.
    Personally I'd recommend you give yourself a little project to work on and just get stuck in
    Kind Regards,
    Owen

  • How to use non sap application in sap.......?

    hi,
            anyone has any idea how to use non sap application  like java class in sap through abap programming. please let me know ...
    thanks in advance.
    saurin shah.

    Hi,
    DATA: COMMAND TYPE STRING VALUE 'C:\j2sdk1.4.2_08\bin\java',
    DIR TYPE STRING VALUE D:\eclipse\workspace',
    PARAMETER TYPE STRING VALUE 'Helloworld'. "here the name of your java program
    CALL METHOD CL_GUI_FRONTEND_SERVICES=>EXECUTE
    EXPORTING
    APPLICATION = COMMAND
    PARAMETER = PARAMETER
    DEFAULT_DIRECTORY = DIR
    MAXIMIZED =
    MINIMIZED = 'X' "If you need the DOS window to be minimized
    EXCEPTIONS
    CNTL_ERROR = 1
    ERROR_NO_GUI = 2
    BAD_PARAMETER = 3
    FILE_NOT_FOUND = 4
    PATH_NOT_FOUND = 5
    FILE_EXTENSION_UNKNOWN = 6
    ERROR_EXECUTE_FAILED = 7
    OTHERS = 8.
    check this link
    /people/gregor.wolf3/blog/2004/08/26/setup-and-test-sap-java-connector-outbound-connection
    Regards,
    Satish

  • How to define a BW/BI system in Portal using BI SAP Query Connector.

    Hi,
      How to define a BW/BI system in Portal using BI SAP Query Connector.
    Portal>System Administration>System Configuration-->Portal Content >New System (from PAR)>com.sap.portal.systems.bi-->
    How to retrive the parameters required from a BI 7.0 System.
    Thanks

    Hi,
    You can refer to this link:
    http://help.sap.com/saphelp_nw70/helpdata/EN/c9/b0c8ce704d40fbb18312f8e65b4b0b/content.htm
    Hope it will be helpful.
    Best Regards,
    Assaf Klieger

  • SAP GTS------- SAPPI with Seeburger BIC----- ATLAS using with SAP PI

    Hi All,
    I have scenario this SAP GTS----->SAPPI with Seeburger BIC--->ATLAS(German customs system)
    1)Inbound flow: SAP GTS will send the customs declaration message to ATLAS(German customs system)
    2)outbound flow: response messages from ATLAS(German customs system) approved the customs declaration message and send to SAP GTS
    How to achieve using with SAP PI with Seeburger modules. What are adapter is required for this scenario.
    Idoc coming from SAP GTS to Seeburger BIS and then convert to EDIFACT send to Atlas systeam.
    For mapping  Source is Idoc (CCECUS02) and Target is EDIFACT(CUSDEC_UN_D96B).
    Regards,
    Ramesh

    >
    Ramesh Gulipalli wrote:
    > Hi All,
    >
    > I have scenario this SAP GTS----->SAPPI with Seeburger BIC--->ATLAS(German customs system)
    >
    > 1)Inbound flow: SAP GTS will send the customs declaration message to ATLAS(German customs system)
    > 2)outbound flow: response messages from ATLAS(German customs system) approved the customs declaration message and send to SAP GTS
    >
    > How to achieve using with SAP PI with Seeburger modules. What are adapter is required for this scenario.
    >
    > Idoc coming from SAP GTS to Seeburger BIS and then convert to EDIFACT send to Atlas systeam.
    >
    > For mapping  Source is Idoc (CCECUS02) and Target is EDIFACT(CUSDEC_UN_D96B).
    >
    > Regards,
    > Ramesh
    > .
    for converting an XML to EDI or vice versa you can use the seeburger adapter.
    http://www.seeburger.com/xi-pi-adapters/

Maybe you are looking for