AS2 Seeburger error troubleshooting
Hi,
I just would like to ask if anybody knows how to troubleshoot errors on AS2 Seeburger. We usually have the below errors in the Seeburger Monitor:
- Error on send, will not be retried Could not send ansynchrone MDN to partner!
- Error on receive, task will not be retried Cannot initiate received message to backend system AND max retry reached!
- Error on receive, task will not be retried Could not send ansynchrone MDN to partner - url not set!
- Initiation to Backend Pending Could not send ansynchrone MDN to partner!
- MIC error
Do you happen to have materials about Seeburger which shows how to resolve and prevent such issues? I also need to get the root cause of these issues, can you kindly help me identify the actions I need to take to get to the root cause?
I look forward to hearing form you.
Kind regards,
Grace
- Error on send, will not be retried Could not send ansynchrone MDN to partner!
1. Tell Business partner to not to request MDN when they send document to you.
2. check the authentication certificate in your sender agreement
- Error on receive, task will not be retried Cannot initiate received message to backend system AND max retry reached!
1.Sender might be using wrong certificate.
- Error on receive, task will not be retried Could not send ansynchrone MDN to partner - url not set!
same like first answer
- Initiation to Backend Pending Could not send ansynchrone MDN to partner!
same like like first answer
- MIC error
valide sender is not identified, check the AS2 id and certifcates
Similar Messages
-
Information on AS2 Seeburger monitoring
Hi All,
Recently a Seeburger interface got introduced in our production,could any one please share their experience or documents for monitoring AS2 .
2)In As2 scenarios ,how to correlate the MDN number with XI Message Ids.
Regards,
VidyaHi look at this Thread
Re: Mapping and Monitoring in B2B(Seeburger adapters) scenarios
AS2 Seeburger error troubleshooting
Regards
Abhishek
Edited by: Abhishek Agrahari on Jun 1, 2009 7:02 AM -
Error in communication channel AS2 Seeburger EDI Adapter
Hi,
I am facing one issue in communication channel at receiver side. Adapter type is AS2 Seeburger EDI adapter.
Brief overview of scenario: Sender is R/3 sending an IDOC and Reciever is Party (Vastra_Gotaland).
The error in reciever communication channel is : Error type: REPORT_ERROR >> Error date: 8/26/10 10:18 AM >> Description: MIC not verified # integrity-check-failed [8/26/10 10:18 AM].
Please give your important feedbacks.Hi Vikrant,
I have already checked channel configurations and there is no problem with signing certificate. I have checked that also.
Edited by: Sadhna Achhra on Aug 26, 2010 1:10 PM -
Seeburger As2 adapter error after upgrade
Hello,
After an upgrade from PI 7.01 to PI 7.11 we have problems with our AS2 seeburger adapter. We installed the compatible version of seeburger but got stuck on the following error:
Message could not be forwarded to the JCA adapter. Reason: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: java.io.IOException: org.bouncycastle.cms.CMSException: key inappropriate for algorithm., SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: java.io.IOException: org.bouncycastle.cms.CMSException: key inappropriate for algorithm.
Thanks a lot for any advice,
Regards,
ErikHi
Pls chk the security jar files. you can download the latest version of these from java portal. This might fix the issues related to Key.
Srikanth Srinivasan -
Seeburger AS2: Proxy Error 502
Hi guys,
I'm facing a problem using AS2 Seeburger Adapter.
When sending the message I'm getting the following error:
Could not deliver as2 message to partner: 502 Proxy Error
( The HTTP message includes an unsupported header or an unsupported combination of headers. ) # null
I've checked the AS2 Header message and I've got the following content:
POST /as2/HttpReceiver Connection: Keep-Alive
content-disposition: attachment; filename=1208788092268
Message-ID: <[email protected]1>
Subject: AS2 Message
Disposition-Notification-To: testcompanyAS2
AS2-To: receivertestAS2
Date: Mon, 21 Apr 2008 14:28:12 GMT
AS2-From: testcompanyAS2
AS2-Version: 1.1
content-type: application/octet-stream
begin test
1
end test
One of the things which is odd is why doesn't the AS2 adapter place the http://<server_used>:<port_used> before the "/as2/HttpReceiver".
Another thing is, shouldn't we have a line break after the POST?
It seems to me that this two problems may be raising the 502 exception...
Have you guys faced something similar?Hi,
no, there shouldn't be any line break and the path is correct too..
First thing I'd check is the proxy settings. Is your partner's AS2 server in the same network? Or are you sending messages outside your network? Ask the network guys for a information about the proxy. Is this configured in your adapter properly (there is a proxy configuration parameter)? Because I think there is network issue now..
Peter -
SEEBURGER Error (Outbound from XI): SSLHandshake Exception
Dear SAP experts,
Need your help regarding Seeburger error that i was encountering during our testing.
SAP have successfully triggered an IDoc from their system and was successfully sent to SAP XI for message translation. SAP XI have successfully translated the message and will be sending the output message via AS2 of XI to AS2 of the third party.
But, as looking the Seeburger (message monitor) of XI, there is an error logged:
Status Description: Could not deliver as2 message to partner: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: No trusted certificate found # null
The AS2 of the third party is also their SSL certificate.
Can somebody help me what is the root cause of the error?
Thank you very much in advance.
Have a great day!
GodofredoHi Soumya,
Thank you for your information.
The XI certificate we are using wa not yet expired. (will be expired by Sept 2008).
The second link, i think, was not applicable, since, we are using AS2 adapter and not Soap adapter.
Im still checking what could be the root cause of the issue.
Hope you can help me with this one.
Thanks! -
Regarding AS2 seeburger to idoc interface
Hi Team,
I hope you are doing well.
I am working on as2 seeburger to idoc interface.
what are the steps required for this in IR and ID ?
where can we monitor if we get the error in as2 adapter side?
Regards
ANJANHi,
>>>what are the steps required for this in IR and ID ?
In ESR:
1.First you need to get the xsd of EDI document and import it into ESR under External definitions and import the IDoc also into ESR.
2. Create a service interface for the EDI document structure.
3.create message mapping between the ED(xsd of EDI doc) and Idoc.
4.Create operation mapping.
In ID:
1.Configure the parties using the AS2 IDs.
2.Create an AS2 sender communication channel(refer the configuration guide that you receive from seeburger).
3.Create an IDOC receiver communication channel.
All the remaining steps are same what we do for normal scenarios like receiver determination,interface determination and agreements.
>>>where can we monitor if we get the error in as2 adapter side?
In Seeburger workbench
Regards,
Priyanka -
Hi All,
I have a requirement to create alert in AS2 seeburger adpter.Once the message fail in Seeburger Workbench , need to send some alert mail to the appropriate recipient.
Could it be possible to monitor messages of seeburger in XI (SXMB_MONI or Runtimework bench) means what we monitor in Seeburger work bench, can we monitor same in Xi, in that case we can use XI alerts .
Please suggest some solution.
-RahulBut its possible that few errors at workbench are visible as stucked messages in RWB. From there u may raise the alert.
Hi Prateek,
What r those few types of error visible in workbench....could you please throw some more light on that.
I am seeking for the solution for alert mechanism in seeburger...... so once the message failed in seeburger it report the error to the some specific recipient.
Does seeburger provide such facility???
Any other possible solution??
-Rahul -
Seeburger AS2 Reciever error: 404
Hi
Configuring and activating the interface for AS2 receiver channel is loggin error in RWB:
Unable to forward message to JCA adapter. Reason: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: 404 %2Fhttp%3A%2F%2FBlueberry%2ECommu%2Ecom%3A4080%2Fas2NotFound
Pls can any help be offered to fix this issue?
Regards
PrabhuHi Prabhu,
Check the belowlinks
403 Forbidden error in a Secured B2B (EDI XI) connection
Http* Errors in XI
Make sure that SAP/XI/Engine is active in SICF transaction.
Regards,
Venkata Ramesh -
Hi,
I'm trying to test AS2 connection with External system and got some errors.
I'm able to send message successfully to the external system with MDN Mode Synchronus with out any errors and got the MDN back, I changed the MDN mode to Asynchronus and got the below error. Do we need to do any extra configuration for Asynchronus mode MDN?
Waiting for your valuble suggestions.
Error message : Error in unkown channel: (No session available) >> Error type: COMMUNICATION_ERROR >> Error date: 9/23/10 2:19 PM >> Description: 500 - Internal Server Error: Error while handle incoming request: java.lang.NullPointerException: while trying to invoke the method java.lang.String.toUpperCase() of an object returned from com.seeburger.as2.tasks.result.MDNDecomposerResult.getMdnOriginalMessageID() [9/23/10 2:19 PM]
Thanks,
KishoreHi,
Sorry for the late reply.
Receipt Delivery Address : Enter the URL of yr own AS2.
Yes, I specified our AS2 address as http://xxxx:50000/SeeburgerAS2/AS2Server
Time Out: What you have given.
10 min
In case of asynchronous MDN mode, an Report channel and Sender agreement always have to be configured also when u201CRefer to XI systemu201D is disabled
Yes, I have created Sender agreement and Sender communication channel with Message protocol as Reports.
Thanks,
Kishore -
Seeburger AS2 Adapter Error :AUTHENTICATION_ERROR
i am doing the scenario for Purchase Order -> XI ->File
custumer is posting the purchase order
and XI Receives the PO using AS2 Adapter (Seeburger) and sends the output as File
i have done all the AS2 Adapter configurations as mentioned below but still i am getting the error in Seeburger Monitoring, the Error is Authentication_Error
1. Communication chennel
Adapter Type : AS2
Direction : Sender
Transport protocol : HTTP
Message Protocol : AS2
AS2 : Authentication Required is Enabled
Message Subject : Filled which is in Seeburger Monitor
2. Sender Agreement
Sender Communicational chennel which is created above
Security Setting
AS2 Sender Config :
Authentication Certificate : Customer public key
AS2 Receiver Config :
Decryption Key : Private key
3. in Party Identifiers
Party Name
AS2 ID
is there any settings missing to rectify the error "AUTHENTICATION_ERROR"Hi
Check with PIAPPLUSER authentication
With this Check the following content on AS2 may be you get more clue.
http://www.customware.net/repository/display/WMFAQ/AS2-authenticationfailureinreceivingEDIINT+MDN
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/135b0b94-0701-0010-f6a9-86a14057544a
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bpxproj/edi%2bwith%2bpi
Handling EDI interfaces using Seeburger BIC modules
Thanks
Gaurav -
Seeburger AS2- Authentication Error
Hi All,
We are using Seeburger AS2 adapter and we will send and receive EDI documents to two Mail Box.
We are using certificates for signing and encrypting the message. While sending and receiving EDI documents to Mail Box1, all messages are successfull.
When we send message to Mail Box 2 . It is successfully delivered to the receiving partner. But when we are receiving message from trading partner we are facing following error in the Seburger Workbench.
Error while parsing message in AS2 adapter:AUTHENTICATION FAILURE.
We have restarted the server and tried, still same error we are facing.
For AS2 Channel Configuration in Integration Directory we followed SAPXI_AS2Adapter_en document.
Can any one suggest solution to solve the error.
Regards
PrakashIt is certificate issue which was solved
-
AS2:Seeburger Proxy redirect error?
Hi Guys,
We are getting the following error when trying to post the file to the AS2 server.
Message could not be forwarded to the JCA adapter. Reason: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: 307 Proxy Redirect # , SEEBURGER AS2: 307 Proxy Redirect #
My AS2 receiver adapter is configured with the below parameters
Server: FQHN
Port: 80
URL Path: /as2receiver.aspx
HTTP Timeout: 120
Sign: MD5
Encrypt: 3DES
MDN Mode: No MDN
Content Type: application/octet-stream
Payload Mode: MainDocument
unchecked: Dynamic attributes
any help or suggestions would be appreciated
Thanks,
SriniHi Srinivas,
Thanks for your quick reply. We are not using any proxy server. I have tried with the port 6263 and i am getting the error as below
Message entered AF MP exit bean and will be passed to the JCA adapter now
SEEBURGER/AS2: Received order from system.
Message could not be forwarded to the JCA adapter. Reason: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: java.net.ConnectException: Connection timed out: connect # , SEEBURGER AS2: java.net.ConnectException: Connection timed out: connect #
what are the port numbers that are generally used for the AS2 communication? any help would be appreciated
Thanks,
Srini -
Seeburger AS2: Proxy Error 407
Hi All,
I am facing the following error while sending message to receiver through AS2
Could not deliver as2 message to partner: 407 Proxy Authentication Required ( The ISA Server requires authorization to fulfill the request. Access to the Web Proxy filter is denied. ) # null
Kindly suggest the solution to resolve the error.
Hoping for a good reply
Regards
PrakashMay not be an authentication issue. Please go through this link:
http://www.isaserver.org/tutorials/Troubleshooting_ISA_authentication_issues.html
Confusing Authentication problems.
In many instances most people have confused authentication with a service that is explicitly denying them access to the resource. Please note that if you are denied access to a resource it has nothing to do with authentication but with permissions to the resource. An authentication issue normally identifies itself with prompt for user credential or with an error message stating that authentication has failed with the server.
A typical error that you will encounter is error 407 Proxy Authentication Required this means that the authentication has been denied because the user has no valid user account in the domain or that the password has been entered incorrectly. The 401 error however displays an unauthorized error message this mean the user permissions to that resource are denied. This error message tells you to look at the ISA server rules not at the way the authentication is handled
Authenticate: username.passwords should be right
Authorization: not allowed to access a resource
"The ISA Server requires authorization to fulfill the request. Access to the Web Proxy filter is denied." You might have to look at this authorization issue. -
I've already seen [this posting |SEEBURGER AS2: 403 Forbidden #; and my AS2 scenario is working properly as long as I have a single channel.
The wrinkle is that I need to add a second AS2 channel for the same trading partner. The second adapter is needed to allow for message transofmration, this must be done in the sender channel since the receiver channel is an idoc channel, which does not allow for transformation.
Is it possible, if so how, to set up two unique Seeburger AS2 sender channels to receive messages from a single trading partner, and to apply message transformation in one of those channels and not the other.
-GerryHi Gerry,
It is not possible to have the same channel twice for the same trading partner.
But you can use the "skipExecution" parameter and an expression, to evaluate if you need to run the conversion or not.
Do you receive different message types from one partner in the same AS2 channel?
And some of them need to be converted while others need no conversion?
regards,
Daniel
Edited by: Daniel Rexter on Nov 22, 2010 5:06 PM
Maybe you are looking for
-
Getting values from the dynamically created textboxes
Hello, I am developing one jsp page using struts. In the page i m dynamically adding some rows with 2 textboxes in each row. and after entering data into those rows , user clicks on save button and page is submitted. I want to capture all this data o
-
This report is hanging in the Loop
Hi Experts 1. This report is with parameter equipment no and date range . when I am placing the parameter in the report at first the report is displaying with one record which is correct. but it should display the more records according to the parame
-
Video stretched when exported even when "letterbox" is checked
Hi, I'm trying to export a lower quality version of one of my HD movies. I've previously been able to do this when I export using Quicktime Conversion at 640x480 with the "letterbox to preserve aspect ratio" option checked. However, I just did exactl
-
Hi, Here is a basic question that I would like to clear myself: Does Weblogic server have one instance of Ejb Container where it runs all different kind of Ejbs (Session, Entity)? I'm not talking anything about clustered systems, just case of one phy
-
Market Risk Analyzer : JBRT_CFM ALM Simulation
Business requirement : to make a interest income/expense budget/forecast for the next fiscal year and to evaluate the P&L impact of future changes in the debt / investment portfolio. Idea for solution : JBRT_CFM report (Net Interest income tab) Probl