AS3: Could we convert .swf into .flv and .flv into .swf
I'm searching for a program that can take an .flv and convert it to an AS3 .swf file. Is it possible in as3, Does anybody have any ideas?
I am not talking about any third party converter software.
Thanks,
Hi swati61,
I'm not sure why do you want to play an swf file in flv player. Will you post it on your website?
If yes, here is a solution:
http://www.swfkits.com/swf-to-flv-converter/
If you want to convert flv to swf, you can check this
www.flash-video-mx.com/video_to_flash_web/
Similar Messages
-
In previous versions of Firefox, I was able to easily download and convert videos into .flv files. I was then able to burn DVDs of theses downloaded videos using DVDFLICK. I'm now unable to do this using Firefox6.0.2?
Hello,
There is a process by which you can produce a BluRay encode on a red laser DVD. See link below
from Ken Stone site.
http://www.kenstone.net/fcphomepage/burn_br_mac_superdrivestone.html
Also this can be done in Toast 10 with the BluRay plugin, somewhat easier.
Good Luck, Tom -
Converting swf to flv to take advantage of streaming
The problem
My captivate 6 SWF is set to start playing after 1% download is achieved. You can see the movie at www.gmatfix.com/swf/app_videointro.swf. My site uses the standard ActionScript3 Loader class to load the SWF, but in so doing, the entire file gets loaded before it starts playing, regardless of the preloader percentage I set. If you clear your cache and go to http://www.gmatfix.com/#/app/videointro, you will notice that there is a significantly longer delay before the file is available for playing. I would like to avoid this delay.
Failed Solution
I would like to convert the SWF to an FLV file since these (I believe) can be played in embedded flash content even while they are still being downloaded. I removed the only interaction from the SWF (a couple of buttons on the last slide), and the advanced interactions panel (F9) in Captivate shows no interaction on any slide. I then tried to follow the instructions from Adobe on how to get Captivate output to FLV by publishing the project as F4V and using Adobe Media Encoder to convert F4V to FLV. However, in Media publishing options I don't see the F4V media type; only EXE, APP, and MP4. I tried dropping the SWF directly into Adobe Media Encoder, but the SWF is not compatible with that application.
What is the best way to convert an SWF (contains no interactions besides the playbar) to FLV?
ThanksHi emmision and welcome to our community
Do you have Flash handy and are you comfortable using it? If
so, you might try bringing the Captivate into Flash and pumping out
the .FLV from there.
Just a thought... Rick -
CONVERTING SMARTFORM INTO PDF AND PRINTING DIRECTLY
Hai guys,
I got a problem.
First the Smartform I created doesnt show all TABLE LINES(the rows coloumns)...
so I have converted the SMART FORM to ADOBE FORM PROGRAMITICALY ...
now in order to PRINT ..
one has to first SAVE the FORM(adobe form) onto desktop(or whereever) and give it to PRINT...
unfortunately my CLIENT doeasnt like the EXTRA STEP..
so i best i can SAVE the file to a hardcoded location and
OPEN it ..
But then CAN I
a)PRINT DIRECTLY without SAVING??
b)ISSUE PRINT PROGRAMITICALY
c)I learnt that a SMARTFORM can be GENERATED INTO PDF only at RUNNTIME(from SMARTFORMS>UTILITIES etc)..i briefly tried that..can I use that to GET THE PDF to PRINT when one gives PRINT from SPOOL REQUEST(sp01)
hoping to give some quick pointsHi,
http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm
or
*& Report ZSPOOLTOPDF *
*& Converts spool request into PDF document and emails it to *
*& recipicant. *
*& Execution *
*& This program must be run as a background job in-order for the write *
*& commands to create a Spool request rather than be displayed on *
*& screen *
REPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_sender LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
Write statement to represent report output. Spool request is created
if write statement is executed in background. This could also be an
ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
Alternative way could be to submit another program and store spool
id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
to sap-spool
spool parameters %_print
archive parameters %_print
without spool dynpro
and return.
Get spool id from program called above
IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
PERFORM convert_spool_to_pdf.
PERFORM process_email.
if p_delspl EQ 'X'.
PERFORM delete_spool.
endif.
IF sy-sysid = c_dev.
wait up to 5 seconds.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool',
'request to be created.'.
ENDIF.
FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM.
FORM get_job_details *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM.
FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
perform send_email using p_email2.
ENDFORM.
FORM send_email *
--> p_email *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = 'Attachname'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_mess_bod
it_mess_att
using p_email
'Example .xls documnet attachment'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
ENDFORM.
FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = ld_spool_nr.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables it_message
it_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Regards,
Kumar -
Could someone convert this .swf to .gif for me?
I've made this .swf banner and I need it converted to .gif. I've tried many free programs but they all leave ugly watermarks. I don't want to buy a program that I'm going to only use once.
Would someone be kind enough to convert this into .gif for me? If possible keep the filesize under 350KB.
Thanks so much!
https://www.mediafire.com/?cblckbpin7rvig7Hello master_w,
You can use "sprite sheet" feature of Flash CC 2014 for export your banner like sprite frames.
Then you can open this png file in photoshop, cute parts and make a gif using the "timeline". -
How to Convert frames into minutes and seconds
Hi,
does anyone know how to convert frames into time (minutes and
seconds). I need the users to view the swf with current time being
played and over time. I have 2152 frames in total and I want that
to be converted to time. Can anyone help me on this. I would really
appreciate it. It is very urgent!!!!
ThanksTime Indicator,
> does anyone know how to convert frames into time
(minutes
> and seconds).
That depends entirely on the framerate of the movie. At the
default
12fps, 12 frames would be one second; 24 frames would be two.
At 24fps, 24
frames would be one second.
> I need the users to view the swf with current time being
played
> and over time. I have 2152 frames in total and I want
that to be
> converted to time. Can anyone help me on this. I would
really
> appreciate it. It is very urgent!!!!
Judging by your four exclamation points, I'd say it's
definitely urgent!
Well, again, if you're at 12fps, 2152 frames would take 179
seconds, or 2
minutes and 59 seconds. I arrived at that number by dividing
2152 by 12.
Keep in mind, though, framerate is actually more of a
guideline than an
exact figure. Framerate determines the rate at which Flash
will *try* to
display content. On an especially slow computer, the Flash
Player may not
be able to keep up, and the same number of frames might
actually take more
time.
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design." -
My wife and I have made many purchases over several years on seperate accounts, how could we join them into one account, without losing everything? We both use Iphone 5's and share an Imac at home.
Purchases using one Apple ID cannot be merged or transferred to another Apple ID. Purchases are forever tied to that Apple ID used. You have to decide which Apple you want to use for purchases and stick to that Apple ID so that you can share: Settings > iTunes & App Stores > Apple ID : > use the same Apple ID here to share purchases.
-
I purchased songs from Itunes store and I would like to record a CD to my parents with specific songs but when introduce the cd a message appears that the songs are not in MP3 format, how could I convert them?
Hello
In itunes...preferences you can change the setting to import songs instead of mp4 to mp3. Afer changing this setting, right click to the songs and than you are able to convert to mp3. ths's it -
Can i open eps file in photoshop element 12 and convert it into jpeg?
can i open eps file in photoshop element 12 and convert it into jpeg?
You can open it in Irfanview (free), then save as JPEG.
Download the program here:
IrfanView - Official Homepage - one of the most popular viewers worldwide -
I Need help in converting a pdf into word. I've purchased it a few months ago and now for the first time I tried to use word and I can't it only gives me the option to convert it into a pdf when it is already a pdf! Urgent help please
Not sure what you mean by "tried to use Word". ExportPDF doesn't change what Word can do. Can you explain what you try and what happens in more detail?
-
Making spool, convert it into PDF and send that PDf throgh EMAIl
Hi,
In my making ALV report. In that i want to make the spool and then convert it into the pdf and send mail to the recepient.
AtulHi,
please try the following code. It works for me.
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
DATA : path LIKE pcfile-path.
DATA : extension(5) TYPE c.
DATA : name(100) TYPE c.
DATA:receiver TYPE somlreci1-receiver ,
p_file LIKE rlgrap-filename.
declarations for PDF convertion
DATA: path1 TYPE string ,
fullpath TYPE string.
DATA :textlines LIKE tline OCCURS 100 WITH HEADER LINE.
DATA otf LIKE itcoo OCCURS 1000 WITH HEADER LINE.
DATA it_lines LIKE tline OCCURS 100 WITH HEADER LINE.
DATA options LIKE itcpo.
DATA header LIKE thead.
DATA result LIKE itcpp.
DATA: bin_filesize TYPE i.
fullpath type string.
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
DATA: filesize TYPE i,
convcount TYPE i,
cancel(1).
textlines-tdformat = '*'.
textlines-tdline = 'Hello Hao'.
APPEND textlines.
options-tdgetotf = 'X'.
options-tdnoprev = 'X'.
CALL FUNCTION 'PRINT_TEXT'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX = ' '
ARCHIVE_PARAMS = ' '
DEVICE = 'PRINTER'
dialog = ' '
header = header
OPTIONS = options
IMPORTING
NEW_ARCHIVE_PARAMS =
RESULT = RESULT
tables
lines = textlines
otfdata = otf
EXCEPTIONS
CANCELED = 1
DEVICE = 2
FORM = 3
OPTIONS = 4
UNCLOSED = 5
UNKNOWN = 6
FORMAT = 7
TEXTFORMAT = 8
COMMUNICATION = 9
BAD_PAGEFORMAT_FOR_PRINT = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
IMPORTING
bin_filesize = filesize
TABLES
otf = otf
lines = it_lines
EXCEPTIONS
err_conv_not_possible = 1
err_bad_otf = 2.
fullpath = 'C:/foldername/test.pdf'.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = bin_filesize
filename = fullpath
filetype = 'BIN'
APPEND = ' '
CODEPAGE = ' '
NO_BYTEORDER_MARK = ' '
IMPORTING
FILELENGTH = c
TABLES
data_tab = it_lines
FORMAT_TAB =
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6.
*filename = fullpath.
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
Set Variables
docdata-obj_name = 'Tst'.
docdata-obj_descr = 'Testing'.
reclist-receiver = give the mail id.
reclist-rec_type = 'U'.
APPEND reclist.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = fullpath
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = fullpath.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
CHECK_DOS_FORMAT =
IMPORTING
DRIVE =
extension = extension
name = name
NAME_WITH_EXT =
PATH =
EXCEPTIONS
invalid_drive = 1
invalid_extension = 2
invalid_name = 3
invalid_path = 4
OTHERS = 5
DATA : pos TYPE i.
DATA : len TYPE i.
Loop And Put Data
LOOP AT itab.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
objbin+len = itab(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND objbin.
CLEAR: objbin, len.
IF pos < 134.
objbin = itab+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND objbin.
ENDIF.
Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
Packing Info Attachment
name = extension.
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = name.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = name.
APPEND objpack.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
Keerthi -
I want to be able to convert PDFs into another format and I know this can be achieved with a small upgrade. However I am also looking for the ability to compress the size of PDFs, if this is at all possible.
You can use Acrobat Standard for this.
-
My iTunes and App store are opening in chinese language but I want to convert it into English... How to do that???
As far as I know the language of the two stores on the iPad (iTunes and the App Store) can't be changed - they should be in the language of the country where your account is based (if they aren't correct then try logging out of your account by tapping on your id in Settings > Store and then log back in).
-
Converted WSDL into .java-files - and now?
I should implement a client for an existing web service. All I have is a .wsdl-file of the web service to call.
Therefore I used the eclipse's functionality to convert .wsdl into .java files, which generated some files for me, for example:
- interface XXX extending java.rmi.Remote
- interface XXXService extends javax.xml.rpc.Service
- class XXXProxy implements XXX
- class XXXServiceLocator extends org.apache.axis.client.Service
- class XXXSoapBindingStub extends org.apache.axis.client.Stub implements XXX
- class XXXRfcException extends org.apache.axis.AxisFault implements java.io.Serializable
- class XXXRfcExceptions implements java.io.Serializable
My question... what to do now? How can I get the service and call its functionality?
Your help is really, REALLY appreciated...Hi,
Write client application like below.
public class Client{
public static void main(String [] args) throws Exception {
// Make a service
XXXService service = new XXXServiceLocator();
// Now use the service to get a stub which implements the SDI.
AddressBook port = service.getAddressBook();
// Make the actual call
Address address = new Address(...);
port.addEntry("Russell Butek", address);
Thanks&Regards,
M.Kumaraswamy. -
Hi, I have tried to use FaceTime using both my Mac and iPhone, it showed it was connecting, but can't not be connected, and it will just show call failed. could you please look into it? thanks
There is an issue with facetime at the moment http://www.idownloadblog.com/2014/04/17/facetime-connectivity-issues-reaching-ma ny-ios-users/
Maybe you are looking for
-
EPMA 11.1.2.2, EPMA Interface tables, .ADS File
DRM Gurus! I'm looking for recommendations for updating EPMA with DRM. Thoughts about loading the EPMA interface tables vs using the new EPMA interface that comes with DRM 11.1.2.2 (creates the .ads file)? This client is going to have a large number
-
Recovered Imported Photos Error/Message
When I recently converted back from Windows XP to MacOS I did an import of all pictures in My Pictures directory on Windows into iPhoto. Not sure what happened, but there are 145 pictures that are duplicates that I deleted, but then every time I laun
-
Hi, Currently XI is pushing the data to Siebel in UTF-8. But Siebel wants only in UTF-16 format. How can I change this in XI. Thanks Sudheer
-
hi, I need a help on using sockets in rmi for communication between the server and the client. I am trying to establish a communication between the server and client through sockets after the remote method call is invoked but before it is fulfilled.
-
Hi, Im the owner of a 20" iMac, bought in late 2007. The backlight had recently broken. I'm looking for any advice on what I should do. It's out of warrenty. The backlight died while the computer was running, though not under any heavey strain. At fi