AS3 package source - location?

How can I access the core package source files?
ex : flash.events.Event class; flash.display.MovieClip
Where are these packages?!!!
I'm using Adobe Flash Profeesional CS4 and CS5.
ActionScript 3 Library Path under Publish Setting says : "$(AppConfig)/ActionScript 3.0/libs"
There I find : "flex.swc"
Is there anywhere I can download the pre-compiled core packages?
Please be specific, as the Flex support site has many downloads and little high-level documentation.
Thank you.

They are bulit into the VM, and thus there is no source code.

Similar Messages

What is the best practice for package source locations?

I have several remote servers (about 16) that are being utilized as file servers that have many binaries on them to be used by users and remote site admins for content. Can I have SCCM just use these pre-existing locations as package sources, or is this
not considered best practice?
Or
Should I create just one package source within close proximity to the Site Server, or on the Site Server itself?
Thanks

The primary site server is responsible for grabbing the source data and turning it into packages for Distribution points. so while you can use ANY UNC to be a source location for content, you should be aware of where that content exists in regards
to your primary site server. If your source content is in Montana but your primary server is in California ... there's going to be a WAN hit ... even if the DP it's destined for is also in Montana.
Second, I strongly recommend locking down your source UNC path so that only the servers and SCCM admins can access it. This will prevent side-loading of content as well as any "accidental changing" of folder structure that could cause
your applications/packages to go crazy.
Put the two together and I typically recommend you create a DSL (distributed source library) share and slowly migrate all your content into it as you create your packages/applications. You can then safely create batch installers, manage content versions,
and other things without fear of someone running something out of context.

AS3 classes source file location?

Can anyone tell where the AS3 package source files (*.as) are located?
Besides for looking up class definitions in the AS3 framework in the Actionscript 3 Language Reference site, I'd like to open specific class files to look at them in their entirety. But I can't seem to find them, nor can I find any documentation specifying their location.
Any information on where the core AS3 package files are located locally would be appreciated.
Thanks.
AS3 Reference
( http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/index.html )

Well Nick, I think you were right..
The following summarizes add/modify classpaths (as2) and 'source path' (as3) :
http://help.adobe.com/en_US/flash/cs/using/WS3e7c64e37a1d85e1e229110db38dec34-7fa4a.html
Under Flash Preferences menu ->ActionScript->Language->ActionScript 3.0 Settings you find at the top level :
Filed labeled "Flex SDK Path : $(AppConfig)/ActionScript 3.0/flex_sdk/4.0.0/"
Found the flex_sdk folder in the Flash application folder (mac), Programs file on PC I imagine.
Therein is a 'flex.swc' file, which I'm guessing has all the core classes.
I'm guessing one needs to download the Flex SDK source code here; you may need to download & learn how to use a Subversion (versioning app) client ?? :
http://opensource.adobe.com/wiki/display/flexsdk/Flex+SDK
Seems like a lot of hoops to jump through just to access those source files for a beginner.
Frustrated.

Unable to locate package source

I am trying to run the install for VS Community 12.0 and I get "Unable to locate package source" On the first package, and any after that if I skip, If I hit the download from internet button nothing happens!

Hello Lukario45,
The problem may pending on your network. Please switch to download the ISO version:
http://go.microsoft.com/?linkid=9863609
And please make sure you'll verify its hash value by refer to the following page:
https://www.visualstudio.com/en-us/downloads/visual-studio-2013-iso-sha1-vs
The sha-1 value should match: 051425045547B212228AB0B5A7BAF8E0B686E886
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unable to uninstall Express 2012 for Windows Desktop: "unable to locate package source"

Once again, I'm running out of hard drive space on my main system drive. 119GB isn't enough when individual programs are taking up 8GB. Arrrgh!!
I originally downloaded the Express versions of VS2012, for web and desktop, but later got the Professional version. I have been able to uninstall Express 2012 for Web successfully, but when I attempt to uninstall Express 2012 for Desktop, I get this error:
Unable to locate package source
Please provide a location to search for the packages:
D:\packages\Preparation.exe
I do not have a D: drive, and I don't see a c:\packages folder.
How to proceed?
Thanks

Hello lloydmalvern,
The problem is that setup are trying to use your source package to uninstall Express 2012 for Desktop. If you want to proceed the problem, please try download a new package and run that package to uninstall your Express 2012 for Desktop.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

DP content source location not written to database - Invalid path \\server\share format needed - 80070002

Hi All, i just wanted to ask if anyone else had experienced this issue yet?
We have ~200 Pull DP's and for some time have been having issues with OSD Task Sequences randomly failing with the error 80070002.
More specifically:
Invalid path. \\server\share format needed
Failed to find an available source location
Our Task sequence is configured to access content directly from the DP. We checked the PackageShare$ and validation state and both were fine. Next we inspected WMI (root\sccmdp:SMS_PackagesInContLib) and this was fine as well. Until today,
we had been redistributing the failing package to remediate, but this is very time consuming with some of the large WIMs and Driver Packages, especially over some very slow WAN links.
Today I decided to explore this a little further by examining the Database..This led me to the table ContentDPMap and the two columns in particular 'URL' and 'URLSubPath'.
I noticed that the packages we were having issues with had a URL of the ServerName in UNC format, and a URLSubPath of just '\'. Other packages had a fully qualified UNC path to the package for URL and a full sub path for URLSubPath.
When we queried the DB further, we revealed 1190 packages to be in this state (for packages supposed to be in the share) out of a total of 42,000 records.
The query we used for this was:
select ContentID,ServerName,AccessType,URL,URLSubPath,URLProtocol,vpkg.Name from ContentDPMap as cdpm
join v_Package as vpkg on vpkg.PackageID = cdpm.ContentID
where cdpm.AccessType = 2 --UNCProtocol
and cdpm.URLSubPath not like '%SMS%' --Packages with issues only have a '\'
and vpkg.PkgFlags = (vpkg.PkgFlags | 0x80) --Limit to only show packages with the 'Copy To Package Share' flag set
Also of note, when a package is marked with a State = 2 the values for URL/URLSubPath are NULL. (State =2 is In Progress).
So my question:
Firstly, has anyone else encountered this?
Secondly - how should I fix it - we tested in our DEV and found that updating the entries remediates the issue with Clients not being able to locate content, but realise this is is an unsupported method.
I will also log this on Connect as it appears to me to be a Bug.
Cheers,
David

Our Task sequence is configured to access content directly from the DP. We checked the PackageShare$ and validation state and both were fine. Next we inspected WMI (root\sccmdp:SMS_PackagesInContLib) and this was fine as well. Until today,
we had been redistributing the failing package to remediate, but this is very time consuming with some of the large WIMs and Driver Packages, especially over some very slow WAN links.
Hi,
So redistributing the failed package could resolve this issue?
How about using prestaged content to distribute these large contents?
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Crystal Report runtime error while changing Data Source Location

Dear All
We are using "Crystal reports for SAP Business one".The Crystal reports version is 12.1.
We built a report in another database with another server.
As we are importing the report in another database of another server,
I am not able to change the Data Source location.
When I am trying to change it,it gives Runtime error and closed automatically.
How can i resolve and change the data source location?

hi kambadasan,
is your CR version the same from which you design the report and to the another server? also did you import your report directly to SBO without changing the data source first? in the case you should update first your Data Source in Crystal Report IDE before importing it to SBO.
regards,
Fidel

Source locator does not exist: com.adobe.flexbuilder.debug.sourceLookupDirector.flash

I'm using FB4 under OSX and for the longest time it refused to load and just displayed errors instead of panes. Nothing that I could find would fix it (including reinstalling). Well, it looks like that problem has been resolved in some update, because it has gone away, and I can go back to viewing projects.
The problem is now when I try to build the project I get the error:
Source locator does not exist: com.adobe.flexbuilder.debug.sourceLookupDirector.flash
Any ideas? My familiarity of eclipse is pretty limited and I don't know what a source locator is. TIA.

Hi,
Looks like those classes are missing from your Flash Builder installation.
Can you check in installdir/plugins/com.adobe.flexbuilder.debug.xxx/com/adobe/flexbuilder/debug/
If those files are missing, do a complete uninstall and then install.

Source locator does not exist: org.eclipse.jdt.debug.ui.javaSourcelocator

Hi
I got a above the error When start the debugging in my NWDS.
Source locator does not exist: org.eclipse.jdt.debug.ui.javaSourcelocator
Solutions is Reinstalling the NWDS , that option is not a good solution(choose any another options)
Please any advices... How to fix ?
Thanks
Srini

Hello,
I've solved it by deleting the .metadata/.registry file (https://bugs.eclipse.org/bugs/show_bug.cgi?id=40947)
Regards,
Ilya

File is not picking from the source location.

Hi all,
File is not picking from the source location. FTP is working properly and file is also placed in source location. I am new the XI, if anybody can give me the solution it would be really helpfull.
Thanks to all.
Korean

Hi Majin,
Check the folder path properly, check the file name( file name is case sensitive) you have given correct or not. See that your communication channel is active. Also check the cache status and check adapter status also by that you will come to know wht is the problem.
Thanks,
Ranjeeth.

Publish a document from Document Workspace back to source location - missing option in SharePoint 2013

We intend to use Document Workspaces for reviewing all our Policies & Procedures.
Once all the changes to the document have been made, I am trying to publish a document from a document workspace back to the source location but the 'Send to: Publish to Source Location' option is missing in SharePoint 2013.
So instead I try to use 'Send to: Other Location' and copy / paste the URL from the original document library but this produces an error.
Has anyone come across this and if yes, know of a workaround?
A prompt response would be much appreciated.
Thanks in advance.

Thank you so much for your prompt feedback and response.
Once I click on the file (from the Document Workspace) and go File | Send to | Other Location and then I paste the URL from the original document library and test it and the link works. It shows me the document library of the original location. When I keep
the filename the same (as I want it to override the original document with the new changes) and then I press OK and then it produces the error? I don't know what I am doing wrong???
When I look at the second hyperlink as below I complete all the steps but after step 5 which settings do I enable in the Content Organizer: Settings & Rules? I doesn't state what I need to configure?
Enable the Content Organizer in the Destination Site
To enable the Content Organizer in the destination site, do the following:
Browse to the site you want files routed to.
Select Settings, Site Settings.
Under the Site Actions Grouping, select Manage Site Features.
Activate the Content Organizer feature.
Click Settings, Site Settings, Site Administration, configure Content Organizer Settings and Rules.
Your prompt assistance would be much appreciated.
Thanks

Picking the abc.B file if abc.A file is present in source location.

Hi All,
I need to pick a file using SFTP adapter.
In the source location two files abc.A and abc.B are placed.
abc.A is placed only after abc.B is fully processed and complete.
I need to pick and process the file abc.B ,only after finding abc.A in source location.
only abc.B should be picked ,as abc.A file is just a indicator that abc.B is fully loaded and ready to be processed.
How this can be done in SFTP adapter?Please help.
Thanks,
Akkasali.

Best way to handle this is write some Unix Sxripting program at OS level copy the file B wheneve A file present in Folder,and create one more folder on FTP to store only B file,and connect to new folder using SFTP adapter .
it will avoide burden on implementing logic in PI side.it is bit simple too,as per my exp.
no standard feature available to acieve this type of requirement i think .
Regards,
Raj

Please advise on how I can find a source location using FM in APO-SNP

Hi All,
I'm able to get the list of orders using FM - BAPI_POSRVAPS_GETLIST3 but not able to find the source for the orders extracted using any function modules / BAPIs
Please advise.
Thanks
Venkat

Hi Venkat,
I hope you are getting purchase requisition list in REQUIREMENT parameter table of BAPI. In that you will find ORDID and PEGIN_GUID also which is nothing but the receipt at Source Location,search for this GUID in another parameter table of RECEIPTS, there you in LOCATION field you will see the source location from where that order is getting fulfilled.
Check in PEGGING_OUTPUT_NODES / PEGGING_INPUT_NODES parameter tables also whether source location is there in location field?
If this is not the case then, You are getting list of Purchase Requisition with their GUID/ ORDID.
Pass this ORDIDs to function module, /SAPAPO/OM_ORDER_GET_DATA, here you will get all the information relevant to any order in live-cache. I think first, you have to convert ORDID from CHAR32 to CHAR22 for input to this FM.
I hope now this will help you.
Regards,
Saurabh

SCCM 2012 SP1 - Server 2012 De-duplicated Package Source

Hi,
We keep all our package sources on a Server 2012 box. I was wondering if it supported if I de-duplicate the drive the packages live on please?
Thanks

OK, just got the info (from Russ Rimmerman):
please be aware that you can run into issues with using server 2012 de-dupe. ConfigMgr does not currently support reparse points, so if you attempt to import a driver
package or something else that has a reparse point in it, it will fail with something like:
“Import failed as \\server\share\driverpath\*
is a Reparse Point that SMS does not support via downloads. DriverCatalog 06-03-2013 14:24:23”
Jason | http://blog.configmgrftw.com

How is a Package/Class located?

Hi,
I developing a web app, and as far as I know, if I place my jar files in the web-inf/lib folder, the server/app should be able to find them when used in my classes/servlets.
Well, it seems that my web server (WebLogic 6.1) is not able to find some of my classes. I'm trying to use classes provided by XALAN, particulary in the package org.apache.xpath. I placed the all JAR files provided by XALAN in my web apps web-inf/lib folder. When I tried to use XPathAPI, I got the error: java.lang.NoClassDefFoundError org/apache/xpath/XPathAPI. I didn't however get an error saying that the package was not found as defined in the import directive.
I also have the path to the JARs defined in the classpath ENV variable for the NT server.
I found a work around to this. I modified the startup BAT file for the web server and appended the path to the XALAN jars in the classpath definition for the web server. It works, but I want it to pick up the JAR without making modifications to the web server's startup script.
I've placed other jar files in the web-inf/lib folder and had no problem using them (ADOBE FDF TOOLKIT).
I was thinking that maybe the web server is looking in the wrong place, but I'm not sure how a web server or application server find the right package?
If I have a org.apache.xpath in JAR1 and in JAR2, but only JAR2 contained the class XPathAPI, will the server look in both jars for the class?
Any explanation or a link to an article on how a package is located during execution will be greatly appreciated.
Thanks.

The import directive is compile time only. The complier will turn:
import java.awt.*;
import javax.swing.*;
import java.awt.event.*;
import javax.swing.event.*;
public class LotsOButtons extends Button {
    public static void main(java.lang.String args) {
        Button b = new Button(((Button)(new Button())).toString());
        Frame f = new Frame(b.toString());
        f.setVisible(new Boolean(b.getEnabled()).booleanValue());
        f.add(b, BorderLayout.CENTER);
}into:public class LotsOButtons extends java.awt.Button {
    public static void main(String args) {
        java.awt.Button b = new java.awt.Button(((java.awt.Button)(new java.awt.Button())).toString());
        java.awt.Frame f = new java.awt.Frame(b.toString());
        f.setVisible(new java.lang.Boolean(b.getEnabled()).booleanValue());
        f.add(b, java.awt.BorderLayout.CENTER);
}and the imports are never seen.
Try doing a Start -> Find -> Files or Folders for *.jar (I found out the hard way that it supports wildcards) and delete the conflicting XALAN, 'cause on the ExtClassLoader finds the first it's not ging to turn back.

AS3 package source - location?

Similar Messages

Maybe you are looking for