AS400 (iSeries) Printing to HP LaserJet M5035 MFP Tray 3

Hi,
Am trying to print from (iSeries) AS400 to tray 3 of HP LaserJet M5035, but the print keeps on diverting to tray 2 (A4). The iSeries is sending the job as A3, so one would assume the printer would print this job to tray 3 (A3), but it does not... Support have looked at the printer config on the iSeries and can do nothing more to change the tray... Does the M5035 have a setting that needs to be changed to allow this... ?

I just spent the last two days on this and have finally sorted it out. It actually isn't that hard to do but for some reason, no one has consolidated the information in one place!
First and foremost, make sure that you have all the latest and greatest firmware updates for your printer, your computer and your mobile devices.
Next, you need to connect your printer to your network via an ethernet cable, this is the only way to get in to the printer softare to configure it for your wireless network.
Navigate the printer menus on the keypad to Reports>Config Report and print this report. It will provide you with the IP adress and IPv4 address for the printer.
With the printer connected to your network and powered on, point your browser to the IP address of the printer. If this doen't work (it didn't for me) use the IPv4 address.
This will open the configuration panel for the printer and will let you configure the wireless for the printer so that it can join your wireless network. You will see various tabs across the top. Select network. Then along the left you will see wireless. Choose that. Now you should see a list of wireless networks available including your very own home network. Choose that one, enter your password and hit apply.
Disconnect the ethernet cable and you should be ready to Airprint from all devices. This worked for me, I can't imagine it won't work for all...then again...

Similar Messages

HP Laserjet M5035 MFP Scanner Issue

Hi,
Having trouble with office HP Laserjet M5035 MFP printer. The printer prints jobs fine when they are sent to it from a computer but when you use the ADF or glass scanner bed the document comes out light. Have read many posts and have done all the usual things, toner, clabrate the scanner, update firmware, with no luck. If I go into the copy settings and bump up the density the print looks better but need to do this with every job. I'm thinking the issue is with the scanner assembly but want to check and see if anyone has replaced this unit before and did it resolve the issue. Thanks in advance for any help.

Hi,
One thing I was going to try with the formmater board was to bake it. I've had success with baking other formmater boards like the HP 3005 printer. The cold solder joints crack causing issue. I place the formatter board on a cookie sheet with balls of tin foil placed under it to raise it off the cookie sheet. Pre heat over to 350, remove the memory, you can leave the battery installed. Bake in the over for eight minutes. Remove and and let cool. I've done about 20 like this and it's fixed about 15. So worth a try.
Thanks,
Aland

HP LaserJet M5035 MFP - Domain authentication - Mac OS 10.6.3

Hi,
I am using HP LaserJet M5035 MFP and there were many discussions about this. However, I am facing a new problem that I am using a domain authentication. So the smb syntax:
smb://username:password@workgroup/server/sharename
does not work with me.
I tried to use the syntax:
smb://domain/username:password@domain/server/sharename
but it is a wrong syntax. I do not know how to provide my domain account in the smb syntax. I would appreciate if you can show me how to use the domain authentication in smb.
Thank you.
An.

Hi Mirre,
Welcome to the HP Forums.
I see that you are having issues scanning on the 10.6. You have no scan function in the HP Director software.
I will be happy to help you.
I have provided a document for how to scan with Apple software to see if you have the same results.
How to Scan: OS X v10.7.
Disregard the title.
Select Scan without HP software. Select Method three.
If you didn't run through the fax software during the initial install it won't allow you to scan. (even if you aren't using the fax you have to run it)
If your not sure go ahead and run the fax setup assistant.
Close all applications.
On the Apple menu bar click Go, applications, Hewlett Packard, device utility, open the HP setup assistant and run it.
You should also have one listed as HP Scan to try and run it.
On the Apple menu bar click Go, applications, Hewlett Packard, open the HP Scan and try to scan.
Now try and scan again.
Please provide in detail the results if you are still having issues.
How is the printer connected? (USB/Ethernet)
Were you able to scan from Apple's software?
Did you run the setup assistant and were you able to scan?
What is the full name and product number of your printer? How Do I Find My Model Number or Product Number?
Is this the Laserjet Pro M1536?
Thank you for posting on the HP Forums.
Have a great day.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

LaserJet M5035 MFP Job Storage

We have a LaserJet M5035 MFP printer. A customer stored a number of print jobs on this printer and made them private. They are secured by a PIN. The customer is now gone, but when contacted has no idea what the PIN is.
How to we go about resetting the PIN or just flat out deleting the jobs? I'm hoping to not have to go through all the possible combinations.
Brian

Hi ,
Also with job ageing , to delete the pending job with PIN secure perform Hard disk intialization
To perform a hard-disk initialization
1) Turn the MFP off and then on.
2) When the memory count appears on the control-panel display, press the right-hand side of the
TART button until all three LEDs are lit. Release the START button.
3) Press 5 one time. INITIALIZE DISK appears on the control-panel display.
4) Press 6 one time. A series of asterisks appears on the control-panel display. Wait for the MFP to
complete its initialization sequence.
Regards
Suganya

2101nw print server (and LaserJet M1132 MFP) – installation problems on Windows 7 (64bit)

For two years, I've been a happy user of an HP printer (LaserJet M1132 MFP), wirelessly connected to my home network thanks to a HP Wireless G Print Server HP 2101nw.
A week ago, a new machine came in and – to align operating systems - I had to install Windows 7 (64 bits) also on my laptop (previously we were running Windows XP).
Then, I went on with the reinstallation of HP software, for the print server and the printer.
And it was a disaster.
After the failure of the first installation ("Installazione non riuscita"), I went through a series of attempts of uninstalling and reinstalling, again and again, by various methods. Uselessly. Even Revo Uninstaller did not help.
Then, looking for information over the web, I read there was a known problem of incompatibility of the print server’s driver with 64-bit environment, and that HP was not going to rewrite it .
You can imagine my disappointment.
Now, hopefully, I write in this forum to ask for help. My request is twofold:
1) I would like to properIy clean up my laptop and remove all that bad installed sw (both of the print server and the printer), so that at least I can successfully reinstall printer software for using it via USB cable.
For this purpose, can you please give me your suggestions ?
2) I would like to know: It is true that there is no driver available for use this print server on Windows 7 (64 bit) ?
I’m asking because I found these pages which seems to give some hope, but I’m not so sure ... :
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-2101nw-Wireless-G-Print-Serv...
http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/HP-2101nw-wireless-printserver-on-w...
Many thanks in advance for your help
Simone

For two years, I've been a happy user of an HP printer (LaserJet M1132 MFP), wirelessly connected to my home network thanks to a HP Wireless G Print Server HP 2101nw.
A week ago, a new machine came in and – to align operating systems - I had to install Windows 7 (64 bits) also on my laptop (previously we were running Windows XP).
Then, I went on with the reinstallation of HP software, for the print server and the printer.
And it was a disaster.
After the failure of the first installation ("Installazione non riuscita"), I went through a series of attempts of uninstalling and reinstalling, again and again, by various methods. Uselessly. Even Revo Uninstaller did not help.
Then, looking for information over the web, I read there was a known problem of incompatibility of the print server’s driver with 64-bit environment, and that HP was not going to rewrite it .
You can imagine my disappointment.
Now, hopefully, I write in this forum to ask for help. My request is twofold:
1) I would like to properIy clean up my laptop and remove all that bad installed sw (both of the print server and the printer), so that at least I can successfully reinstall printer software for using it via USB cable.
For this purpose, can you please give me your suggestions ?
2) I would like to know: It is true that there is no driver available for use this print server on Windows 7 (64 bit) ?
I’m asking because I found these pages which seems to give some hope, but I’m not so sure ... :
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-2101nw-Wireless-G-Print-Serv...
http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/HP-2101nw-wireless-printserver-on-w...
Many thanks in advance for your help
Simone

Duplex printing on HP LaserJet 1536dnf MFP

Hi,
I have a HP LaserJet 1536dnf MFP. Each time I attempt to print a PDF document on my printer through Adobe Reader (duplex, 4 page per sheet, flip-up), the second page of each sheet will be printed as a whole mess of stripes instead of the intended output.
Please advise.

I have the same problem with a new, firmware updated, HP LaserJet 1536dnf MFP. Curiously, two-sided printing works fine with "Paper size: Letter" whereas it fails for "Paper size: A4". For A4 paper size every second page is a mess of stripes.

Could Print en HP LASERJET CM2320nf MFP

Estimado,
necesito conectar mi celular con la impresora HP LASERJET CM2320nf MFP pero me estan pidiendo que ingrese un correo de [email protected] pero no tengo ningun correo conesa extension.
me podria habilitar un correo para poder configurar la impresora en mi celular.
saludos

@zheper
To recieve a printer email address, your printer needs to be eprint capable and then be registered with the HP Connected cloud. Unfortunately, the cm2320 is not an eprint capable printer.
If you would like to make this printer and eprint capable printer, then you can add the mobile print accessory (see link below). You other option would be to upgrade to a new printer or try and use Google Cloud Print.
HP 1200w NFC/Wireless Mobile Print Accessory
If you choose to try and use Google Cloud Print, you will need to follow the instructions from Google for adding a classic printer. I have not tried to print from a phone using a classic printer so don't know if this option will work.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Cannot print to Color Laserjet Pro MFP M177fw

I have a HP Color Laserjet MFP M177fw hard wired to my router. I can print from internet explorer, chrome and other applications such as Office and Notepad, etc. I cannot print from Adobe Acrobat Pro XI. I can get to the print dialogue page and hit print but nothing comes out and I can't see any jobs stuck in the print queue.
I am using an HPtouch computer with Windows 8.1

I have the same problem for my 177fw. It does connect to my desktop via wireless connection when I check the control panel, yet no printing job could be done and they just disappear in the queue list. Sorry to say that, Ms. Helen-Hua, but I don't think "trying to print as image" can help to solve the problem no matter what result it is. For most people I don't think they would accept a printer that cannot print a simple text document.
Look forward to receiving working solution.
PS. The wireless connection has absolutely no problem for my win 7 laptop and my desktop which is formerly win 7. The problem only happen when the computer is upgraded to win 8.1 and another brand-new win 8 desktop.

HP LaserJet M5035 MFP 'Out of Order' Message

I have an 'Out of Order' message displayed on this printer at the top of the display following the printer name. The copy and fax buttons are 'greyed out' in that they are pale and not working. The printer works OK and there are no other error messages either on the screen or on the error report.
I've updated the firmware to the latest version but it still shows this message and will not copy. I have reset to factory settings and the copy button will light up momentarily and then dim again, and the fax button does the same. I have done a cold reset with the same results.
Without any error messages I don't know where to start looking first. This message is not in the manual and neither does it come up in a Google search.
Anyone come across this before.

Hi,
One thing I was going to try with the formmater board was to bake it. I've had success with baking other formmater boards like the HP 3005 printer. The cold solder joints crack causing issue. I place the formatter board on a cookie sheet with balls of tin foil placed under it to raise it off the cookie sheet. Pre heat over to 350, remove the memory, you can leave the battery installed. Bake in the over for eight minutes. Remove and and let cool. I've done about 20 like this and it's fixed about 15. So worth a try.
Thanks,
Aland

Printer HP Color LaserJet Pro MFP M176n

El boton de encendio no funciona. Aprieto en el frontal y en el lateral. Acabo de desembalar la impresora.
He probado a utilizar diferentes cables. Hay corriente en la toma.

Hey @tomzab,
Welcome to the English HP Consumer Forums!
If you prefer to post your question in your preferred language,
Spanish: Foro de usuarios de HP
Alternatively, please feel free to post a revised message in English.
Thank you, and have a great day!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Hp laserjet m1132 mfp can't print from remote desktop

Hi, i've installed HP LASERJET M1132 MFP in my PC with windows 7 ultimate 32 bit and it works fine. But when i connect using remote dekstop with our Windows server 2008 r2 64 bit. its not printing. error "test page failed to print , would you like to view the print troubleshooter for assistance?" and it doesnt solved the problem.
please help

Thank you for your interest.
The situation is a bit different than the picture. Windows Server 2008 R2 is available through the WAN. LAN is plugged into the PC-1, PC-2 and Konica Minolta printer. HP LaserJet M1120n MFP is connected via USB to the PC-1. OKI ML 3320 printer is connected via LPT also to the PC-1. PC-1 has access to Konica Minolta printer via the LAN. PC-2 also has access to Konica Minolta printer via the LAN. PC-2 is also available for PC-1 HP and OKI.
It seems to me that I found the explanation for the printing problems - some of "my" printers are simply not compatible with Windows Server 2008 R2. I found on the net the following information:
http://www.windowsservercatalog.com/item.aspx?idItem=cdde267a-800d-2d9f-1f0c-225cabd6838e&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=31df9819-ca52-4684-dc3b-8e31b70c77d7&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=6475235d-8dbb-9e95-11dc-3575d569acc2&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=59731747-9976-8d51-dcbb-7664cbc17a89&bCatID=128...
I think I can close the topic.
(translated from Polish into English using Google translator)

Color LaserJet Pro MFP M176n installed but not printing

Hello Everyone,
I have problem with my printer Color LaserJet Pro MFP M176n.
at thebegining i try to install it buteverytime i run the installer it give me HP Installer error, so i installed the Microsoft Net Framework 3.5 and run the install and it was working perfict, i install the driver on USB cable and after it show me successfull and print test page and finish, so i click print test page and in printer and fax the printer M176n Show 1 printing job and then 0 but no print came out i try again same, i remove the cable and plug it again the printer is responding perfictly but still not printing i check the scanner and its working fine but only the printing is not, so i try to install it through network and it was sccessfully installed with IP but when i print, still the same 1 printing Job but nothing came out of the printer when it came 0 printing job.
Please help......
- Windows is windows XP 32bit
- Printer name Color LaserJet Pro MFP M176n PCLms
Thanks
I did try to use Scan Doctor, the printer didnt print at the first check but when it ask forenternal print test page it printed then it ask me toif it print of not and i click yes it print in enternal print so it ask me to remove and reinstall so i did 2 to 3 times and still same will not print but when run Scan doctor it will print on enternal print .....
Wael Hilal

Hello @ Averus89,
Welcome to the HP forum. 
I understand you have done quite a lot to resolve your M176n and its connection to the ePrint service. 
I would like to help you with this issue. 
If the printer is not printing the web services info sheet, or allowing you to add it to HP Connected, I
would set a manual DNS. 
I wont go into great detail about setting this up. From your post, I feel you know your way around the printer and your network. If I am mistaken, let me know. I will go into detail. 
The DNS to try is:
Primary: 209.244.0.3
Secondary: 209.244.0.4
Set the DNS then try printing the web services info page again.
Let me know if this helps.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

HP LaserJet M1132 MFP does not print from a remote desktop

Hi,
I have a HP LaserJet M1132 MFP (product number CE847A) connected to a PC (MS Windows XP Home Edition + SP3) via USB. There is no problem with the printer. However, when the connection using Remote Desktop (it's set to use local facilities and resources, or in my case, printers, and serial ports) to the server (MS Windows Server 2008 R2), I can not even print a test page from a remote desktop.
Error message: "Print a test page failed. Do you want to display a tool to solve problems with printing to get help?"
But it does not lead to nowhere, as expected is access to the internet, and I have not it from a MS Windows Server 2008 R2.
The same error is for the HP LaserJet M1120n MFP.
I have installed on my PC other printer - old OKI ML321 (needle) connected to a PC using LPT cable and network printer Konica Minolta 1690MF (in another room). In both of these printers can easily print a test page from a remote desktop.
Please help me.
This question was solved.
View Solution.

Thank you for your interest.
The situation is a bit different than the picture. Windows Server 2008 R2 is available through the WAN. LAN is plugged into the PC-1, PC-2 and Konica Minolta printer. HP LaserJet M1120n MFP is connected via USB to the PC-1. OKI ML 3320 printer is connected via LPT also to the PC-1. PC-1 has access to Konica Minolta printer via the LAN. PC-2 also has access to Konica Minolta printer via the LAN. PC-2 is also available for PC-1 HP and OKI.
It seems to me that I found the explanation for the printing problems - some of "my" printers are simply not compatible with Windows Server 2008 R2. I found on the net the following information:
http://www.windowsservercatalog.com/item.aspx?idItem=cdde267a-800d-2d9f-1f0c-225cabd6838e&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=31df9819-ca52-4684-dc3b-8e31b70c77d7&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=6475235d-8dbb-9e95-11dc-3575d569acc2&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=59731747-9976-8d51-dcbb-7664cbc17a89&bCatID=128...
I think I can close the topic.
(translated from Polish into English using Google translator)

LaserJet Pro MFP M125a not printing

Hi,
my relatively new LaserJet PRO MFP M125a stopped printing today. Scan function is still working. All lights are on. Cannot print test page. When I try to print Word or PDFdoc, spool is empty, no job is waiting.
Uninstaled all HP software and drivers, cleaned registry, installed it again. Nothing. Changed USB cable, it worked for few pages, then turned off. When I turned it on, problem is here again. Changed USB cable again, but no luck.
Windows is fresh, new HP drivers...
Help is needed.
Best regards,
Nikola

Hi @MaletaBG,
I would like to help you with getting the printer, printing again.
Try and print a hardware self test on the printer to find out if it is a hardware or software issue.
HP Color LaserJet Pro MFP M176n Printer, and HP LaserJet Pro MFP M125, M126, M127fn, M128fn, and M12...
Please try the steps in this document to see if it will help resolve this issue.
HP LaserJet Printers - 'Printer is offline' Message Displays on the Computer and the HP Printer Will...
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
If you appreciate my efforts, please click the Thumbs up button below.
Thank You. I look forward to hearing from you.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

LaserJet Pro MFP M127fw, Can't Enable Web Printing

I have tried using the machine to enable web printing as well as using the computer and typing in ip address. No matter which way I go I cannot enable web printing on my laserjet pro mfp m127fw. I am connected to the net. Can access the internet on other devices. So there should be no issues there. Is something wrong with the machine or is there something I can try? Of course we are NOW ready to start using this feature after having the machine for a while so I hope there is not something wrong with the machine.
Thank you!
This question was solved.
View Solution.

Hi @mdandy,
Welcome to the HP Support Forums. I see that you are getting a connection error message when trying to enable the web services for your Laserjet M127fw printer.
Please ensure the printer is up-to-date with its firmware. If you are unsure how to check I have included the Getting the Latest Firmware and Product Updates document to assist you.
Once you are up-to-date with the firmware, please set a manual IP address and manual DNS servers for the printer. The steps on how to set a manual IP address can be found in the Printer Does Not Maintain Wireless Connection document. For the DNS servers please use 8.8.8.8 for the Manual Preferred DNS Server and 8.8.4.4 for the Alternate DNS server. These are Google’s public DNS servers.
Please let me know how things go.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

AS400 (iSeries) Printing to HP LaserJet M5035 MFP Tray 3

Similar Messages

Maybe you are looking for