AS5400 HPX feature license upgrade part number
Dear Support,
I've been search round the cisco site without sucess!
I've been asked to ensure all devices support SSH access for our new security policy. We currently have many AS5400 HPX running with the 12.3T IP Plus license, and believe I need to upgrade these to the 12.4T IP PLUS IPSEC 3DES image (feature navigator shows ssh server is in this feature set).
Could someone advise me the part number I need for the upgrade.
Your assistance is appreciated.
I always rate helpful posts.
Regards, Adrian.
PS I am aware these are EoS, and we should be eventually going to the XM platform.
The things is that part codes are complicated to find for users, especially when products are already EoS, as one has to track the original order to match an upgrade code from the original list price.
Because of this I suggest you contact the cisco office for them to find the exact codes. In certain cases they can then waive the requirements in writing to satisfy all licensing requirements.
Similar Messages
-
Are the following features licensed or part of Enterprised Edition?
Are the following features licensed or part of Enterprised Edition?
1) Standby Archival - ARCH
2) Standby Archival - LGWR
3) Standby Transmission
4) Data Guard (Not active Data Guard)
Thank youWith the Enterprise Edition, yes they are all part of DataGuard which is licenced. However, the Standby Instance, itself, needs to be licenced.
Hemant K Chitale -
I have an upgrade version of CS4 that I got sent when it came out and never used. Someone else wants it, but the part number (PN) is causing confusion. Does anyone know where I can find out more about the part number, and the compatibility of this software as I can't find any reference to it either. It's a Design Standard upgrade from CS3 to CS4.
Thanks!I think the best bet here is to contact Adobe, as they would know what needs to be done in this particular case.
Cheers
Hisham -
Part number to upgrade ACS 1113 from 4.2 to 5.1
I would like to upgrade my ACS server SE 1113 from 4.2 to 5.x but I cannot seem to find a part number. Does anyone know what the license part number may be?
Thanks,
GaryGary,
See here:
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps5698/ps6767/ps9911/product_bulletin_c25-569135.html
HTH,
Faisal
If you find this post helpful, please rate so others can find the answer easily -
In reviewing the Cisco Licensing Guide, there is a license part number for MPLS on the Nexus 7010. Part Number is N7K-MPLS1K9. Is there a corresponding part number for the Nexus 7710?
For the benefit of others, here is what we found. The N7K was hitting the bug CSCtg95381.
Symptom
Nexus 7000 may punt traffic to CPU; so that the traffic may experience random delay or drop.
Further looking, ARP is learned and FIB adjacency is in FIB adjacency table.
Conditions
The problem is caused by race condition. Some hosts have not responded to the ARP refresh sent by
N7k which in turn trigger to delete ARP entry due to expiry. As a result the route delete notification is
sent to URIB from the process. However there is still traffic coming to given IP address as a result the next packet that hit glean resulting in triggering ARP and hope ARP is learnt from the host this time.
Workaround
(s):
Clear ip route < host>.
Not totally explains why it was working for certain client-server combination but yet the workaround is holding well for end-points when implemented.
There would be no host route for the destination server in the adjacency manager on N7K-01. The only thing thats there is the subnet route pointing towards the vlan gateway address. Implementing the work-around, a new /32 route can now be seen in the adjacency manager for the server.
The bug is fixed in releases starting 5.1(5). Planning to upgrade to 5.2(3a).
Regards, Rashid. -
What is the part number for License 8.6
I have call manager 8.6 and I need to add new license , can anybody tell me what is the part number?
dose it depend on the ip phone model ?If you are a partner you can refer to the ordering guide:
http://www.cisco.com/web/partners/downloads/partner/WWChannels/technology/ipc/downloads/uc_og-ucl_cucm_mcs_cer_CUxAC_cime_sme-edcs840769.pdf
CUCM licenses are user based, so which license are you looking at CUWL, UCL?
This should help:
http://www.cisco.com/c/en/us/products/unified-communications/unified-communications-licensing/index.html -
Can I transfer my CS4 license to my new laptop with a part number but no CD. I can not find the CD.
Download CS4 products
Mylenium -
Which part number for CSC-SSM with Plus license?
Dear All,
Which part number for CSC-SSM with Plus License? i saw the part number for standard license.
could you let me know?
Best regards,Hi,
The part number is the following:
ASA-CSCX-YP-ZY
where X is your CSC model, Y is the number of seats of the license and Z is the number of years.
For instance, if you need a 2 year plus license for a CSC10 with 250 seats, the part number would be ASA-CSC10-250P-2Y
Regards,
Nicolas -
Blu-ray 3d Disc drive upgrade on the Q180 part number please
Would like to Purchase Blu-ray Disc drive upgrade on the Q180 but I need part number or could you even advise me where I can't but it, Thanks in advance Regards Garvan
hi Garvan,
thanks for posting and welcome to the community.
You might want to check the product Confugration page of the support. You'll be able able the find the list of part numbers needed.
http://support.lenovo.com/en_US/product-and-parts/productConfiguration.page?
DO let me how it works out.
regards -
Hi,
I am looking for the cucm license part number for BE7K. Please advice me.Hi Aman,
This is not the one. When we are ordering the license for be6k, the license part number will be R-CBE6K-K9. Then we can select all the required licenses under this product.
The same way there is aproduct code for BE7K. I am looking for that. -
Impact of enabling Manufacturer Part Number feature
Hi,
Please note that I would like to activate Manufacturer Part Number (MPN) of SAP. I want
to record MPN no of own material, Manufaturer detail in material master.
This is for recording those details in MMR. The point is that when I activate MPN indicator in OMT0
then only mfr part number, Manufact, mfr part profile fields are appearing.
What is the impact of it?
So please provide your comments on the same.
Regards,
Parthasarathi K
Edited by: Partha MM on Jul 16, 2011 10:32 AMActivate the MPN in OMT0.
In OMT3B, select 21 screen seq, and click on data screen, select purchasing and click on subscreen, and replace the screen no 0001 with 2313, then you will get the same in purchasing view for all material types.
REAL TIME SCENERIO: When the parts are manufactured at a plant and procured at that time, in case if any defective piece is there or any problem arises, at that time, the vendor confirms the rejection for the Manufacture part number, so it is entered in the MMR.
You can see the settings here also: SPRO --> MM --> Purchasing --> MM --> Define manufg,. part profiles, this is used to define the profiles. -
Difference between part number WS-CAC-6000W & WS-CAC-6000W=
Hi,
I would appreciate if someone can advise the following:
1. What is the difference between the part number, e.g. WS-CAC-6000W & WS-CAC-6000W=? Any Cisco links that explains?
2. Which IOS features requires us to purchase the license, which IOS comes with the switch itself? Any Cisco links that explains?
3. Any Cisco links / verification tools that help us to verify that the modules, supervisor engine, power supply, etc that we have selected works fine with our requirements?
Thank you.
ChristinaHi,
1) the addition of the "=" just means "spare" - the parts are identical.
2) You don't say which switch, but as (1) is a 6500 power supply I guess that's what you've got ;-) If you talking about IOS then what you're really talking about is the supervisor module and which one you need is totally depenent on your requirements, i.e. do you need to support MPLS? PoE? WAN? etc.. So, I'd start here:
http://www.cisco.com/en/US/products/hw/switches/ps708/index.html
and read /all/ the information in the "product literature" section. It'll take a while, but you'll have a hugely increased understanding of features and options available - people here will be happy to answer more specific questions.
3) There is a tool for this here (login needed):
https://tools.cisco.com/qtc/config/html/configureHomeGuest.html
HTH - plz rate if useful
Andrew. -
Ipbase to IP service License upgrade stack switches
All
switch part number # WS-C3750X-48P-S
current License Level: ipbase
switch currently connected as a stack with three switches
I am planning to install license to make existing switch IP base to full L3 functionality that is IP services , just to make sure that I need to install license in all the switches I think yes ??, also would like to check while upgrading licensee
I need to break the existing stack , install licenese reload and connect again stack ?? or without breaking stack copy lic each switch flash and load once , since it is production switch bit concern .
Regards
LernerIt seems that you should be able to download license to all the members and then from the master send command to make them boot with the new license. Don't forget to accept the EULA.
https://supportforums.cisco.com/message/3345903
Daniel Dib
CCIE #37149 -
Hello Team!
In order to upgrade regular ESA licenses to Premium; is there a specific top part number or SKU for upgrade?
Thanks in advanced!In short - no. I would suggest to reach out to the account team/Sales Ops. If you needed to upgrade the license, they would be able to work up the appropriate bill of materials, and incorporate that into the keys/bundle you have running on the appliance(s) currently --- and then take into account where you need to go, additional services that would be required.
You can also reach directly out to Global Licensing, in order to see if they can guide you through this process. They would be able to assist, based on the contract, serial number of appliance(s).
Please contact our Global Licensing Operations team:
https://tools.cisco.com/SWIFT/LicensingUI/Home
Licensing FAQ
Phone: 1-800-553-2447, opt 3
Request to have a case opened for GLO/Licensing.
Their email directly is: [email protected]
Hope this helps!
-Robert
(*If you have received the answer to your original question, and found this helpful/correct - please mark the question as answered, and be sure to leave a rating to reflect!) -
CISCO Firewall with following specs:
Firewall with filtering, anti-virus and anti-spam . I need license for the minimum number of users .
when i searched i found ASA5512 but there is no any information about number of user .The features you mention used to be in the content security modules and licenses on the old 5500 series.
Cisco has moved to a different model and set of offerings with the Next Generation Firewall features of the 5500-X series. Web filtering is provided by the Web Security Essentials (WSE) feature. It is licensed to run on the CX module and usually sold with the Application Visibility and Control (AVC) feature set. They are licensed annually or in multi-year subscriptions and not by number of users.
Please see the subscription license part number in the bottom half of Table 4 here.
Cisco has mostly moved the AV and anti-spam features off the firewall product line. You can get Cloud Web Security (with or without Advanced Malware Protection) which integrates via a connector with an ASA. It is described here. Anti-spam would be a feature of the Cisco Ironport Email Security Appliance (ESA).
Maybe you are looking for
-
Need help in Interactive Report
hi, i am using a ALV report now i want to make it interactive. as i click on the current page i need to go MIR4 transaction. how can i do it? please please help on this issue.
-
Second master page displays as a blank page
Hi, just wondering if there is a work around for the following scenario: I have two different master pages (1 & 2) that are used to create two different page standards. I have two body pages (A & B ). Page A is placed on master page 1 and Page B is p
-
How do I find the channels palette in PSE 8?
Hello, I am using Photoshop Editor 8 and attempting to create retro-style/technicolor images using the channels palette and creating greyscale images having gone through red, green and blue filters, and then colorise them (As seen here: http://www.yo
-
Error message on iTunes when syncing iPhone 4s
When I plug in my iPhone 4s to my computer and access iTunes, an error message pops up, "This iPhone cannot be used because the Apple Mobile Device service is not started." My iPhone doesn't show up on the left side as a device. This just started h
-
How many types of function modules are there
hi gurus, how many types of function modules are there... what type of function module bapi is.... i don't know much about that... pls help me... regards, praveen