AS91/AS92 - Delete Duplicate Assets

Dear friends off a difficult times
In PRD, during a load of assets to a new area, the user generated duplicate records for fixed assets (load by LSMW).
I found many forums on this subject, but have not found a complete solution to my problem.
Sets:
For acceptance values (SPRO):
SM30: 31/09/2011
OAYC: 09/2011
For the load was done the following:
1) create old asset by AS91;
2) Date of Incorporation: 31/09/2009 (must be this date)
3) In "Values ​​in Acceptance", I insert the acquisition value, accumulate depreciation and value of the amount of depreciation in the year launched.
For deleting the assets created in duplicate was performed the following:
1) I tried to delete the values ​​of acceptance, but only got the purchase price and Accumulated Depreciation (last year) by AS92;
2) I changed the key of depreciation for 0000 (not depreciate) by AS02. The beginning of the depreciation is 01/10/2011;
3) Paralysis also asset by the AS02;
4) I low the asset by ABAVN dated 01/10/2011;
5) I blocked the immobilized by AS05.
OBS.: I could not remove the asset by AS06.
The problem is: When I run the depreciation is calculated values ​​for this asset, which should not happen because we want to eliminate the asset.
How to remove / delete / block assets so that its effect is null in accounting?
Thank you very much.
GLippmann

Hi:
      In order to delete the assets you need to sett a deactivation date on the asset (ANLA-DEAKT) and then use AS06 to delete it.
If there are any postings made to assets then you would not be able to do that. Incorporation date i do not think has anything to do with depreciation ..Depreciation is affected by the asset capitalization date as per period control settings.
Regards

Similar Messages

  • How to choose in Delete Duplicates from internal table?

    Now I need to delete Duplicates from internal table,
    So at first I sort
    than I delete duplicate
    Sort itab1 BY Company_Code  Asset_No Capital_Date.
          DELETE ADJACENT DUPLICATES FROM itab1 COMPARING Company_Code  Asset_No  Capital_Date
    Company_Code
    Asset_No
    Capital_Date
    Remark
    BC35
    1515593
    20021225
    Helen
    BC35
    1515593
    20021225
    Common Asset
    BC35
    1515594
    20030109
    Judy
    BC35
    1515594
    20030109
    Common Asset
    But here comes my problem~If I want to delete the Common Asset in Remark Column,how I let it choose the right one to do it?

    Hi Jack
    Try the below coding..
    Report zsamp.
    types: begin of t_tab,
            comp_code(4) type c,
            ***_no(7) type n,
            cap_date type d,
            remark type string,
            end of t_tab.
    data: i_tab type TABLE OF t_tab,
           w_tab type t_tab.
    w_tab-comp_code = 'BC35'.
    w_tab-***_no = '1515593'.
    w_tab-cap_date = '20021225'.
    w_tab-remark = 'Helen'.
    append w_tab to i_tab.
    w_tab-comp_code = 'BC35'.
    w_tab-***_no = '1515593'.
    w_tab-cap_date = '20021225'.
    w_tab-remark = 'Common Asset'.
    append w_tab to i_tab.
    w_tab-comp_code = 'BC35'.
    w_tab-***_no = '1515594'.
    w_tab-cap_date = '20030109'.
    w_tab-remark = 'Judy'.
    append w_tab to i_tab.
    w_tab-comp_code = 'BC35'.
    w_tab-***_no = '1515594'.
    w_tab-cap_date = '20030109'.
    w_tab-remark = 'Common Asset'.
    append w_tab to i_tab.
    sort i_tab by remark.
    delete ADJACENT DUPLICATES FROM i_tab COMPARING remark.

  • How can i delete duplicates from my itunes account?

    At "View" I chose "Show duplicates."
    Now what do I do to delete duplicates quickly without having to delete each one separately?
    THanks

    Hello, singinheart. 
    Thank you for the question.  Since you have already identified the duplicate media you just have a couple more steps to go.  This article outlines the remainder of the steps in order to mass delete the duplicates. 
    How to find and remove duplicate items in your iTunes library
    http://support.apple.com/kb/ht2905
    Cheers,
    Jason H. 

  • How do you delete duplicate tracks off your playlist?!

    How do you delete duplicate tracks off your playlist - everytime I connect my hard-drive it adds another of every single track - argh!!!!
    I remember there being a 'delete duplicate tracks' option on a much older version of itunes - is this still available and if not if you opt for the 'consolidate library' option will this automatically save to you computer as I have too much music for my laptops memory capacity! On top of that how can I stop this issue from contantly re-occuring everytime I connect my hard-drive?! Apologies if im being thick here.... xX*laura*Xx

    You are doing something wrong, iTunes doesn't add tracks to the library unless you ask it to, so there is a problem somewhere in your workflow which is creating the duplicates. For example, having iTunes set up to "Copy files to the iTunes Media folder when adding to library" and then repeatedly adding in a folder from an external drive would do it.
    Once you've worked out how to stop creating new duplicates you can look at the issue of deduping what you already have. See this recent post for some thoughts and a script that may prove useful.
    tt2

  • How do you delete duplicate songs in your library without having to delete each song individually??

    How do you delete duplicate songs in your library without having to delete each song individually?

    mauijiminar wrote:
    Go to iTunes, select view and click show duplicates. Hold control and A ( select all) and then delete.
    Not a good idea! The "show duplicates" feature shows "all" duplicate tracks, but you only want to delete the "extra" copies, not the "originals".
    I've written a script called DeDuper which can help remove unwanted duplicates. See this  thread for background, including how to delete the extra tracks manually if you prefer.
    tt2

  • How do I delete duplicate songs, but keep a link in their original albums to the single copy of the song left, so it will play in each album in sequence as if it were still there?

    Greetings!
    After importing my 300 or so CDs into iTunes, I found I have tons of duplicate songs.
    Example: I have a song that came in a original album, then in again in a "Greatest Hits" album, then again in a "Hits of the 80's" album, and again in a soundtrack album. I have now have 4 copies of the exact same song.
    How do I delete duplicate songs, but keep a link in their original albums back to the single copy of the song left, so it will play in each album in sequence as if it were still there?
    I don't think this currently exists, but as my library keeps growing the duplicates keep growing.  It would be nice if Apple sees this and adds a way to link songs to multiple albums.
    I don't want to create a custom playlist for every album that has a duplicate song or two (I'd have dozens of playlists) - thought about fixing it that way but not really practical.

    To my knowledge, there is no way of doing what you want. The only workaround is to create playlists for the other albums containing the track, but that isn't practical for most people.
    You could provide Apple with feedback here: http://www.apple.com/feedback/itunesapp.html

  • How do you delete duplicate photos in the photo section of your iPad?

    How do you delete duplicate photos in the photo section of your iPad?  My iPad has duplicated n tripled my photos n want let me delete them.  I can delete photos from any other section but not in photos, this is taken up all my memory. Help!!

    The links below have instructions for deleting photos.
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236
    iPad Tip: How to Delete Photos from Your iPad in the Photos App
    http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
    Another Way to Quickly Delete Photos from Your iPad (Mac Only)
    http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
    How to Delete Photos from iPad
    http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
    How to: Batch Delete Photos on the iPad
    http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
    (With iOS 5.1, use 2 fingers)
    How to Delete Photos from iCloud’s Photo Stream
    http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
     Cheers, Tom

  • How do I delete duplicate songs from my library that have been automaticly downloaded from itunes?

    How do you delete duplicate songs from an iphone 3gs?  I did the automaticly download song feature when doawloading from my CPU and now there are 11 songs that no matter what I do will not come off my phone.  I have tried everything.  Also how do you shut off this automatic download feature?

    Hello momoandfam,
    Welcome to Apple Support Communities.
    Take a look at the article linked below, it’ll answer your questions about finding and deleting duplicate tracks in your iTunes library.
    Find and remove duplicate items in your iTunes library - Apple Support
    Take care,
    -Jason

  • Is there a way to automatically detect and delete duplicate photos in a library

    I just imported a load of photos into my main iPhoto '11 Library from several older MAC's Photo Libraries. Despite repeatedly using the "Don't Import Duplicate Photos" dialogue box, I have many duplicate photos. Is there a way to automatically detect and delete Duplicate Photos?
    I also have iPhoto Library Manager installed on my MAC, but cannot seem to locate on it anything that would do this.
    I have over 4,000 photos, so would really appreciate some help here! Thanks in advance...

    duplicate annihilator - http://www.brattoo.com/propaganda/
    And NEVER import an iPhoto library into another iPhoto library - doing so des not work and creates massive duplication
    if you still have all of the original iPhoto libraries I recommend you drag the bad one you created to the desktop (delete it later when everythin has successfully been completed) and start over usin iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ -  to merge the libraries
    LN

  • How to delete duplicate music in itunes

    I have been downloading a lot of my old CD's and have found I have a lot of duplicate songs from a variety of my album sets...how can I delete them so I only have one of each one?
    thanks!
    Jan

    Dupin may be what you need. If you have the same song as part of different albums then, in my opinion, these aren't really duplicates. Personally I wouldn't throw away some of the tracks on the Beatles "White Album" because I also have them on the "Blue Album".
    For some more thoughts, including tips on how to manually delete duplicates if you have the patience, see this post. It's written from a PC perspective so you may need to use Option or Cmd instead of Shift or Ctrl.
    tt2

  • How to delete duplicate rows in a table

    hai,
    i have a table which consists of hunderds of records and contains duplicate records also. how can i delete duplicate records.
    thanks
    ravi

    This maybe a litle bit fast for deletion:-
    delete from emp where rowid in (
    2 SELECT rowid FROM emp
    3 group by rowid,empno,ename,job
    4 minus
    5 SELECT min(rowid) FROM emp
    6 group by empno,ename,job);

  • How to delete duplicate photos in iphoto

    working in iphoto and want to delete duplicates that were created when I used migration assist to import the iphoto library to new machine.  it duplicated all of my pictures.  Using iphoto 9.1.3

    Did you import one Library to another? That's the usual cause of this.
    If you still have the original library the simple solution is to just trash the damaged Library and do it again. This time don't import the LIbrary, just open it.
    Other than that For dealing with duplicates in iPhoto check out Duplicate Annihilator
    Regards
    TD

  • HOW TO DELETE DUPLICATE ELEMENT IN A VECTOR

    Hi everybody!
    If I've a vector like this vectA={apple,orange,grape,apple,apple,banana}
    and I want final result be vectB={apple,orange,grape,banana}.
    How should I compare each element in vectA and delete duplicate element. Like here duplicated element is apple. Only one apple remain in the vectB.
    Any help,
    Thanks.

    Hello all. Good question and good answers, but I would like to elaborate.
    To begin with, you specifically asked to map the following:
    {apple,orange,grape,apple,apple,banana} ==> {apple,orange,grape,banana}
    Both of cotton.m's solutions do NOT do this, unfortunately. They are both useful in particular cases though, so think about what you're trying to do:
    cotton.m's first solution is best if order does not matter. In fact, as flounder first stated, whenever order doesn't matter, your most efficient bet is to use a Set instead of a List (or Vector) anyways.
    Set vectB = new HashSet(vectA);This code maps to {banana, orange, grape, apple}, because HashSets are "randomly" ordered.
    cotton.m's second solution is good if you want to impose NEW ordering on the List.
    Set vectB = new TreeSet(vectA);This code maps to {apple, banana, grape, orange}, because TreeSet uses alphabetical-order on Strings by default.
    java_2006, your solution is the most correct, but it's a little verbose for my taste :)
    more importantly, the runtime-efficiency is pretty bad (n-squared). calling Vector.contains performs (at worst) n comparisons; you're going to call it n times! Set.contains usually performs 2 comparisons (constant, much better), so I suggest you USE a Set to do the filtering, while still sticking with your good idea to use a List. When the ordering is "arbitrary" (so can't use TreeSet) but still relevant (so can't use HashSet), you're basically talking about a List.
    I think saving A LOT of time is worth using A LITTLE extra space, so here, let's save ourself some runtime, and some carpal-tunnel.
    import java.util.*;
    class Foo {
         public static void main(String[] args) {
              String[] fruits = {"apple","orange","grape","apple","apple","banana"};
              List     l = Arrays.asList(fruits),
                   m = filterDups(l);
              System.out.println(m);
         // remember, both of the following methods use O(n) space, but only O(n) time
         static List filterDups(List l) {
              List retVal = new ArrayList();
              Set s = new HashSet();
              for (Object o : l)
                   if (s.add(o))
                        retVal.add(o);     // Set.add returns true iff the item was NOT already present
              return retVal;
         static void killDups(List l) {
              Set s = new HashSet();
              for (Iterator i = l.iterator(); i.hasNext(); )
                   if (! s.add(i.next()))     
                        i.remove();
         // honestly, please don't use Vectors ever again... thanks!
         // if you're going to be a jerk about it, and claim you NEED a Vector result
         // then here's your code, whiner
         public static void mainx(String[] args) {
              String[] fruits = {"apple","orange","grape","apple","apple","banana"};
              List l = Arrays.asList(fruits);
              Vector v = new Vector(l);
              killDups(v);
              System.out.println(v);
    }

  • How to delete duplicate pictures in iPhoto

    I have many duplicate pictures in iPhoto. Is there an easy way to identify and delete duplicates?

    Check out Tidy Up!

  • How to delete duplicate records in all tables of the database

    I would like to be able to delete all duplicate records in all the tables of the database. Many of the tables have LONG columns.
    Thanks.

    Hello
    To delete duplicates from an individual table you can use a construct like:
    DELETE FROM
        table_a del_tab
    WHERE
        del_tab.ROWID <> (SELECT
                                MAX(dups_tab.ROWID)
                          FROM
                                table_a dups_tab
                          WHERE
                                dups_tab.col1 = del_tab.col1
                          AND
                                dups_tab.col2 = del_tab.col2
                          )You can then apply this to any table you want. The only differences will be the columns that you join on in the sub query. If you want to look for duplicated data in the long columns themselves, I'm pretty sure you're going to need to do some PL/SQL coding or maybe convert them to blobs or something.
    HTH
    David

Maybe you are looking for

  • How to not retriggered output type when changes are made in Purchase Order

    Hi All, Could you let me know how can I resolve this one? We have a custom output type. Now this output type should NOT be automatically retriggered if a change is made to the document/purchase order. Currently the system automatically repeating the

  • User interfaces in Physical inventory

    Hi experts Can i get info on user interfaces in physical inventory process. warm regards marias

  • Version 6 problems

    Curve 9300 3G ( carrier Virgin ) I have downloaded Version 6. I have encountered the following problems. 1) In Maps/GPS when following a route the backlight goes out. I have tried the settings and the light still goes out. The battery is fully charge

  • Back Button in Portal -How to Point to WD application dynamically

    Hi, I have a BSP Application and I am calling webdynpro applications from it. After I get in to WD application When I use BACK button which is in the Default RIGHT TOP side of portal it should go in to my Intial WD application. How do we do that? Rgd

  • FDF toolkit and images

    Hi, I'm using FDF toolkit to populate text in PDF form successfully. However my client wants to start dynamically including an image. This image (a 2D barcode) is being created via third party software dependent upon the other text fields on the PDF