Asa 3des license installation

Hi all,
Is it required for the 3des license upgrade for the asa5510 to reboot for the further
configuration of site2site tunnels.
thanks
Anand

Hello Anand,
The reboot is not required for the activation of this key,
Any other question...Sure.. Just remember to rate all of my answers.
Julio

Similar Messages

Cannot create Volume License Installer

I am trying to create a volume license installer for LabVIEW 9, and I get the following error:
Error Copying File or Folder
Cannot copy mib: Access is denied
Make sure the disk is not full or write-protected
and that the file is not currently in use.
Is the file of the DVD somehow in use?
-Nils
Solved!
Go to Solution.

I am not sure what your specific issue is but I simply wanted to say that I had no issues creating installers LV 2009 for our VLA. Have you checked that destination drive that you are putting the installer on to ensure that it does have enough space and that you do have permissions to write to it?
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

How to specify license triad for volume license installer

I'm trying to create a volume license installer and specify a license server triad for server settings. However it gives me an error if I enter 3 servers. It only allows me to enter one server name. How do I specify a triad? For example: licsrv1:27050,licsrv2:27050,licsrv3:27050

ecaille,
First, I jsut wanted to mention that if you want help with VLM in the future, it is best to post in the VLM specific forum located here.
To solve this issue you have to use a workaround because the Volume License Installer creation process does not support more than one server, and unfortunately the XML files that are used for the installers also won't accept more than one server.
To fix this you can create 3 separate Volume License Installers, one for each server. You can then create a batch file that runs the first complete VLI (just running setup.exe so the software installs also), and then runs the vlmclient.exe from the second two VLIs. The vlmclient.exe is the file that adds the servers to the computer. Therefore by running the first VLI you install the software and the first server, and then you append the second and third server names to the registry key for the server by running the second two vlmclient.exe files. Note that you need to keep the Client folders (that contains vlmclient.exe) separate because you need to run each separately as the XML files have different configurations to add each new server.
The shortcut for this is to simply copy the Client folder from the first VLI you create, and edit the <server></server> tags in the vlmclient.xml file in the two copies you make to contain the other two servers.
John B.
Applications Engineer
National Instruments

Yet Another ASA VPN Licensing Question :)

I have a pretty good understanding of ASA VPN concepts, but not sure about this scenario. Two questions regarding 5525 VPN SSL Anyconnect Premium Licensing.
1. Assuming we already own a ASA 5525-x with 750 Anyconnect Essentials and Mobile ( p/n ASA5525VPN-EM750K9 ) and want the ability for 200 Clientless (Anyconnect Premium) VPN connections, including mobile devices, what part number do I need?
2. Assuming we do not yet own a ASA5525, but want the same 200 clientless VPN connections plus mobile device connectivity, what part number do I need? I'm assuming this is correct >> ASA5525VPN-PM250K9
Thanks!

It's no problem - I sometimes look for an answer to a question myself and find my own 2 year old post explaining the answer. As long as I don't find my 2 week old answer, I'm OK with that. :)
Anyhow, no there's not a SKU to upgrade Essentials to Premium. All the Premium upgrade SKUs are between Premium licensed user tiers (10-25, 25-50, 50-100 etc.).
If you're a persuasive customer and make a strong case with your reseller they may be able to get a deal with Cisco outside the normal channels to get some relief as a customer satisfaction issue. That's very much a case by case thing though and not the normal fulfillment method.

ASA SSL Licensing query

Hi,
We are planning on putting Active/Standby pairs of ASA CSC bundles at three of our sites. We would also like to use these pairs as SSL head end devices.
The question is whether we really need to purchase two sets of SSL licenses (and for that matter CSC user licenses) when only one device will ever be active in the proposed scenario?
I would be very grateful if anyone can clear this up as I have not been able to find anything definitive on Cisco's web or through their distribution channels.
Thanks
Richards

Hi Raj,
Thanks for the response,i was worried that this was the case. Are you totally sure, have you deployed a similar scenario?
We're looking at the 500 user license (list at $30k) so it is harsh that we need to purchase the license twice. I'm sure Cisco will rectity this over time though.
Thanks

Need Acrobat Pro 9 Volume License installer

I just finished a very frustrating chat session with the Adobe support people who notified me that they could not help me in any way when it came to aquiring the Acrobat Pro 9 installer from the Volume Licensing Center. I have a valid serial and need the installer. How does one go about getting this to happen?
Thanks.

Thanks again Jeff. Here's the thing:
When I contact an agent they tell me they can't help me because they don't have access to the software and tell me to try the forums. Now, the forum is telling me to try an agent. You can see how this isn't going to solve the issue.
Is this solution possible? I'm happy to have my key verified.
http://forums.adobe.com/message/4768047

10G license installation on ME 3600X

Hello colleagues,
Could you please help me with one small question. I'm installing 10G license on ME-3600X-24FS-M. This is what I've got before installation:
Switch# sh license
Index 3 Feature: 10GEUpgrade
        Period left: 8 weeks 4 days
        License Type: Evaluation
        License State: Active, Not in Use, EULA not accepted
        License Count: Non-Counted
        License Priority: None
Switch#
After the license was installed:
Switch#sh license
Index 3 Feature: 10GEUpgrade
        Period left: Life time
        License Type: Permanent
        License State: Active, Not in Use
        License Count: Non-Counted
        License Priority: Medium
Switch#
My question is - why license state is Not in Use. There is no sfp+ installed in the switch. Could this be the reason?
Kind regards,
Oleg Krasnov

The problem is this:
The output is quite misleading on the 3600’s              .
It’s says evaluation and not in use.
Index: 2        Feature: 10GEUpgrade                       Version: 1.0
        License Type: Evaluation
        License State: Inactive
            Evaluation total period: 8 weeks 4 days
            Evaluation period left: 8 weeks 4 days
            Period used: 0 minute 0 second
        License Count: Non-Counted
        License Priority: None
        Store Index: 1
        Store Name: Built-In License Storage
Plug in a 10Gig interface:
Index 3 Feature: 10GEUpgrade
        Period left: Life time
        License Type: Permanent
        License State: Active, In Use
        License Count: Non-Counted
        License Priority: Medium

Asa ssl licensing

We have a 5520 ASA with a 100 user ssl license. We need to increase this but 250 is overkill. Is there an option to just add 50 more licenses or do we have to go up to 250?
Sent from Cisco Technical Support iPhone App

That's right - the next level after 100 is 250. Please refer to this post for more details.

Photoshop CC, device license, installation, activation

I subscribed via the French Federation of Photography : a Device license for Photoshop CC.
I got through the installation. (I am administator of the team).
In the administration console, I saw the the license has been activated.
Note: All following messages are in French. I translate them.
At the first run of PS I got a popup window about "Required Connection". I press continue and surprise:
I am said that I can use Adobe Photoshop CC for 32767 days!! (Great for a trial period!).
When I press the button "Activate now", it opens a new window for subscription.
What is my status? Can I use PS CC safely for all my subscription time (one year)?
update: I tried to run PS CC again, and now I am said I have a 30 days trial period. Of course this is not what I was expecting.!
Charles

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

NW2004s ABAP Sneak Preview - License Installation - System No. is empty

I have requested extended demo licence for ABAP Sneak Preview. I received the following in mail from SAP.
Your Hardware key      : XXXXXXXXXXX
Your License Key       : XXXXXXXXXXXXXXXXXXXXXXXXXX
License Expiration date: 20060521
SID                    : NSP
Installation-Nr.       : DEMOSYSTEM
When I am trying to install demo (90 days) license using transaction SLICENSE, I get a screen asking for
SAP System:      NSP
Inst. Number:    DEMOSYSTEM
Hardware Key:    XXXXXXXXXXXX
System Number:   <leaving empty>
Expires On:      21.05.2006
Key:             XXXXXXXXXXXXXXXXXXXXX
If I enter the System Number as blank it says "Invalid License Key". On the SLICENSE screen it says
System Number              "System No. Empty"
Please suggest, What value is need to be provided for system number.

Hi Asish,
I had the same problem. After loging off and loging on again, I skipped the field System Number, filling in the other details.
This time the license was accepted. I hope it works for you too.
Best regards,
Peter Lans

Licensing & Installation Concept in SAP

Hi Gurus,
Our company has purchased a complete Software Package of Netweaver 2004s SR2 with ERP 2005 SR2, IDES ERP 2005 SR2, SRM, CRM, SCM, Solution Manager 4.0
We've already installed the IDES ERP 2005 SR2. Now my question is as you all know we have been given one Installation number & the customer number. So with the same software how many total systems can we install, Do we have to apply for the license for each installed SAP System. Also do SAP charge for each License. Also when we create any users in any client in a system, do we need to pay for that aswell, also what about the development users. In short I'm looking for the Installation & Licensing concept in SAP.
Thanks & Regards,
Nitin Goyal

You must apply for a separate license for each system, however based on the agreement with SAP you can have multiple systems i.e Multiple Utilization means the installation of the Software on more than one Designated Unit for Productive Use, or the setting up of more than one Application Database on one Designated Unit for Productive Use. Multiple Utilization of the Software may subject Licensee to payment of additional license fees.please read End User License Agreement on this if you have a copy with you or with IT/business.
There can be many license types as negotiated by the Business with SAP. You need to discuss with your IT/business group what type of licenses were negotiated and what defines each type of user? Then you can set the user accounts properly.
For each license you have to send the SAP audit report(system generated) with the required inputs yearly once which will be evaluated by SAP.Only users created in productive client will be charged, the users license applies to the development users also.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCSTSL/BCCSTSL.pdf
-Unique System Number (New as of SAP Web AS 6.10)
http://help.sap.com/saphelp_nw04/helpdata/EN/a7/512c6e407a11d1893b0000e8323c4f/frameset.htm
You have got advice to contact SAP because the info you are seeking is more of confidential and based on customer to customer.
Thank you,
Shyam

Personal 8i 8.1.6 Download - Limited License/Installation

Does the Personal 8i 8.1.6 version downloaded from OTN have a limited license such as operational only for sixty days or some other such limitation?
Also, what would I have to do to install it over a previous version of Personal 8i?
Thanks!

The download comes with an OTN Licence, which you have to agree to when you download it. The versions you download are full featured and are not time restricted.
For upgrade issues read the installation manual and the migration manual (both probably available in your download, otherwise try technet)
null

Issues in building licensed installer

Hi everybody,
I am trying to build licensed installers for our company's toolkits. For testing the installer, I changed the date settings of the system and increased it by more than 30 days. Then the addon status turns "Expired" and if I revert the date, it shows "Invalid".
But keeping the date ahead of 30 days from now, if I uninstall the toolkit which is showing the status as "Ëxpired" and install it again, 30 days of evaluation is appearing again. After several attempts, 2012 version of the installer is working correctly when "Windows 7 and later" option under Advanced --> System requirement is checked before building the installer. I want to build 2010 and 2011 version of the installers too. But the same settings are not working for these two versions. Is this observed by any of you here or am I missing something?
Here are the steps I am following to build the installer. Please go through it and If you see any discrepency, let me know.
I am following the steps given in Tutorial: License a LabVIEW Library Using Standard Mode. I am listing the difference between my installer and the guide here -
The guide shows a snapshot of the application (.exe) file added to the project, which shows niwebserver.conf file under CallRegisterAddon.exe. But when I am creating exe file, there is no such file getting generated even for some some test files.
The guide I am referring doesn't mention KEYLIB32.dll and SKCA32.dll whereas in this link, it is asking the user to add these files under [LabVIEW]\resource directory. So, I have included these files in my project.
In the pdf document, it is mentioned that License file should be set "Unlocked"attribute. But selection that option is not enabled in my project.
Under Registry option of the installer, is there any thing particular that Ineed to add? Right now I am adding just the project name.
Kindly help me solve this issue.
Thank you,
Sharath

I have also tried to build the installer using VI Package Manager as suggested by Stephen Roso, Partner Program Engineer,NI. But while I am building it, It is taking a lot of time at "preparing source distribution" step and abort with an error 7 stating file is missing. It is looking for a VI ..LabVIEW 2010\instr.lib\NITUNER\niTuner Set Freq for SMT.vi. which is being wrongly claimed by one of the library of my project. RFSA is already installed in my system. But NITUNER folder is not existing in the instr.lib folder. I have tried reinstalling it but it has not not helped. So, it would be great if any of you can share the NITUNER folder with me so that I can place it under instrl.lib and try building the package.
Thank you,
Sharath

How do I upgrade a trial Premiere Pro installation to an ETLA licensed installation?

We have an ETLA license for Creative Cloud at ISU. We have a faculty member who has installed the trial version of Premiere Pro and would now like to upgrade to our licensed version. Two questions:
1. What's the procedure for upgrading? I have built silent installation packages for all of the Creative Cloud applications. Can I simply install Premiere Pro on his machine with my package and it will accept our ETLA license?
2. Will doing this alter his customizations, or will it revert to the factory default settings?
Thanks in advance.

I encountered this same question with a faculty member who is off campus.
I tried the steps documented here:
Creative Cloud Help | Create license file
Building the package and running the AdobeSerialization file, which prompted for a password, did the trick. I did have to quit out of the Creative Cloud application for it to change the app from showing as a trial with a # of days remaining, to indicating it was licensed normally, but any other apps they accessed were licensed correctly.
I know this is a months old question, but hopefully it helps someone out in the future.

License installation

i have two asa runnig 8.4 configured as Active/Standby
Now i received a new Anyconnect license, how do i install the new license?
- Install the activation key on the Active and Standby unit.
- Install the activation key on the Active unit only.
which one is the proper procedure?

I couldn't find a definitive reference but in 8.4 the AnyConnect license is only necessary to be installed on one unit in a failover pair. The key should be tied to a given ASA serial number. I'd make sure that one is active and enter the activation key on it.

Asa 3des license installation

Similar Messages

Maybe you are looking for