ASA 5505 Failure replaced and need to move the license key?

Can someone point me in the right direction? My ASA 5505 died due to a power surge and I swapped it with a spare. I had Security Plus and a 50 user license and need to move the license keys from the failed ASA 5505 to the new one. I kept both my emails with the activation keys, but not sure how I get this transferred? Thanks in advance.
Joe

I think this is totally unacceptable. For anyone else who uses a 5505 at home and has bought licenses and the hardware out of their own pocket, the idea here should be that you've already bought the hardware and the license. Seems obvious, right?
Yes I can see the license being device specific if not only because that's the way you've designed your licensing activation schema; but if I've just had your product fail and bought another replacement, there should be an understanding or agreement between Cisco and the user that we can reinstate any licenses we've already bought.
Do you really believe it's fair to make someone buy something from you twice, something that they've already bought from you? Do you actually believe that? I believe that the people in the Cisco Licensing department would agree with my viewpoint and I have a pending case with them for this issue right now. I will post my result here.
Make your products last and perhaps I can give credence to your licensing beliefs, until then your products fail and so does your licensing logic.

Similar Messages

I purchased a download version of Lightroom 6 from Amazon and when i write the license key number i'm getting this message " We are unable to validate this serial number for adobe Lightroom. Please contact Customer Support. "

I purchased a download version of Lightroom 6 from Amazon and when i write the license key number i'm getting this message " We are unable to validate this serial number for adobe Lightroom. Please contact Customer Support. "

contact adobe support by clicking this link and then clicking 'still need help' as soon as it appears, https://helpx.adobe.com/contact.html

I am using Firefox for Mac (v 3.6.11, Mac OSX 10.6.4) and need to use the Function keys (specificlaly Ctrl-F7) in a web application. I can't seem to get it to work the same as in Firefox on PC.

I am using a web application that requires the use of the F7 key. Actually, to be more precise, I need the functionality that you would get on a PC if you hit Ctrl-F7 while in this web application in Firefox. I have changed the Mac's settings to allow standard use of the function keys (rather things like volume up/down, etc.) However, when I try to use Ctrl-F7 it appears to be using the function that is built into Firefox browser rather than the web application running within Firefox. (FYI, nothing happens when I try Cmd-F7 or Alt/Option-F7 either).

Leliforever, cheek you list of installed add-ons, the Ask toolbar can be installed without the users knowledge.
For checking other extensions that may cause this, follow the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

I need to use the F12 key as a function key not as volume

I am using a DOS system for work and need to use the F12 key as a function key and not volume how to I do this....... frustrating!

Tried that still changes volume

CISCO ASA 5505 bandwidth Controll and split

Dear All,
Below am giving the infrastructure which i like to do please help me.
I Am Using Cisco ASA 5505 VPN Firewall and 6Mbps 1:1 dedicated internet connection.
in Lan Side we have 3 networks one for Internet Users one For VPN Users One for CCTV
i would like to split the 6Mbps bandwidth for these network 3 networks 3x2 each
each network use 2Mbps bandwidth. The VPN and CCTV Users use up to 6:00 pm after that the bandwidth will be free
after the 6:00 pm we need to use the the VPN and CCTV line bandwidth to the internet Users.
Cisco Adaptive Security Appliance Software Version 7.2(4)
Device Manager Version 5.2(4)
Compiled on Sun 06-Apr-08 13:39 by builders
System image file is "disk0:/asa724-k8.bin"
so please help me with suitable configuration for my purpose./please tell me which device will support for this/what is have to do for this.
Thanks
Lalu R.S

There's not much of that sort of functionality built into the ASA 5505 entry level firewall. To do that sort of thing in the firewall, you would have to move up to one of the newer 5500-X series with next generation firewall features and build a policy using Application Visibility and Control (AVC).
You can do some crude controls with QoS - the configuration guide chapter on doing that is here.

HT1379 The USB ports on my 30" Cinema are not working. The monitor has not been used for a year or so, and the computer is a Mac Book Pro, 1012 model running OS Mavericks. I need to move the computer between two locations, and the other monitor is a 27"

The USB ports on my 30" Cinema HD display appear to not work. The monitor has not been used for almost a year, when I upgraded to a new Mac Book Pro and the 27" retina display. Now I need to move the computer back and forth between two locations using the two displays. The need for operating USB ports is essential. Any ideas. The display appears entirely normal. Am running OS X 10.9.

Disregard, problem solved.

How do I ungroup the pages in my doc, I need to move the first to the end, and it shows me all the pages are in a group

On Pages: I need to move the first page of my document to the end, and it shows me all the pages are in a group. How do I ungroup the pages in my doc.

Hello there, linafrompereira.
The following portion of the online Pages Help for Mac provides information on grouping items in Pages:
Layer, group, and lock objects - Pages Help for Mac
http://help.apple.com/pages/mac/5.2/#/tan5eab46568
Group and ungroup objects
Shift-click to select multiple objects.
In the Arrange pane of the Format inspector, click Group (or choose Arrange > Group from the Arrange menu at the top of your computer screen).
To ungroup an object, select it, then click Ungroup or choose Arrange > Ungroup.
Tip: You can Control-click objects, then choose Group or Ungroup from the shortcut menu. You can also add these buttons to the toolbar: Group and Ungroup.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I just replaced my desktop but now i cant edit etc. I signed in but no good. Do I need to enter my License key again and how ?

i just replaced my desktop but now i cant edit etc. I signed in but no good. Do I need to enter my License key again and how ?

What product are you trying to use to edit etc.: Acrobat ? Have you installed it? Have you activated it?

Hi, just got a new computer and need to move my library from the old one to the new one. Does anyone know how to do this or where I can get the information? Thanks!!

I just got a new computer and need to move my itunes library from my old computer to the new computer. Does anyone know how to do this or where I can get the information? Thanks!

If you Google ipod nano 6th generation manual, you can download the PDF manual. Here's a quote from page 19:
Transfer purchased content to another computer:
1 Open iTunes on the other computer and choose Store > Authorize This Computer.
2 Connect iPod nano to the newly authorized computer.
3 In iTunes, choose File > Transfer Purchases from iPod.
Songs that are not from the iTunes store can be copied to the new computer, and you just have to do File>Add to Library to get them into iTunes. And if you don't plan to continue using your old computer, you should deauthorize it because you only get 5 authorizations for iTunes store purchases, and this will cancel out the authorization on the old computer.

Have downloaded a .epub file from a third party publisher to my pc. Publisher advises that iTunes is needed to move the file to my iPad. iTunes installed on both pc and iPad. What's next?

Have downloaded a .epub file from a third party publisher to my pc. Publisher advises that iTunes is needed to move the file to my iPad. iTunes installed on both pc and iPad. What's next?

Drag or copy the file into the Automatically Add to iTunes folder in your library (default location C:\Users\user_name\Music\iTunes\iTunes Media), or add it manually using File > Add File to Library ... If the file is compatible with iTunes it'll be added to your library and can then be synced with your iPad.

Cisco ASA 5505 performance issues on downloads - data into the ASA from the Internet

I have having serious issues with performance on my ASA 5505s that I am testing with 9.2.3 code.
I stripped the config and removed as much stuff as I could - no VPN etc. and I am ONLY getting about 30-40Mbps downloads from sites but 95Mbps uploads???? Anyone else seeing these problems? If I remove the firewall my PC can hit 300/300Mbps to the same sites using the same switch and cable.
I installed 1Gb of mem on the ASA 5505 but it made no difference. The ASA has a UL IP Security license but I am only using and inside and outside address for these tests, no other ports configured.
Is anyone else seeing this performance problem with the 9.2.3 code? I went to this from 8.2.5 to try to resolve QOS failure bugs that I found in the 8.2.5 code. I did not expect to have a performance hit though and it is only on downloads TO the ASA from the Internet from all speed test sites that I try. Uploading speeds seem fine. No access-lists on my interfaces either...barebones config.
My FIOS and switch interfaces are fine...no errors on any interfaces and the same switch interface hits 300/300Mbps when my laptop is directly attached.
Anyone have a barebones config on their ASA 5505 that flies...I will try it on mine and see if some command somewhere (hidden) is causing the issue. I even cleared the config and started with a clean slate just in case I was missing some command from the older configs that may have impacted performance.

After changing the switch with a high end switch my performance increased but I am still not happy with the throughput out of my ASA. I have about 50+ ASAs 5505s and a dozen 5510s. Most remote sites have 5505s. All my sites right now have 8.2.5-51 and I wanted to put 9.2.3 out there to solve issues I have uncovered on the 8.2.5 code with regards to QOS issues.
I get much better results using the Cisco 3750X attached to the FIOS (right around 300/300 with my laptop directly attached to the 3750x bypassing the ASA - my FIOS circuit rating is also 300/300). Going through the ASA to the same test site I get download speeds of 35 to 75. Changes randomly which really bothers me. My uploads speeds are ALWAYS faster then my download speeds. Example - best download I would ever get is 75Mb and my upload would usually hit 95Mb during the same test period.
I may have to live with it but the inconsistency is what really bothers me.
Here is the config I am currently using. Nothing going on during testing since only a single PC is attached. VPN tunnel to the main site can be up or down...doesn't seem to make any difference. PC does to site directly from outside interface of ASA...split tunneling. Even when I removed tunnels and tested with just the ASA as a firewall to the Internet I was still seeing the same inconsistencies.
Anything obviously missing - new command or anything? Xlates causing issues?

Why does my iPhone 3GS keep restarting on its own, and when I move the phone while its restarting, a white screen comes up and then it takes a while to turn it back on!

So i have an iPhone 3GS and when i move the phone while its restarting, a white screen shows up, and sometimes i need to punch it to turn it on. HELP i dealt with this problem for months and im sick of it! HELP ME!!!!

Sounds like hardware failure, called boot loop. Call Apple and or go on apple.com and make Genius Bar appointment to have your iphone reviewed by a Tech. Provided you iphone shows no physical or liquid damage they will take care of you, or if you have Apple Care Plus
Genius Bar Rerservation : http://www.apple.com/retail/geniusbar/

ASA 5505 8.4. How to configure the switch to the backup channel to the primary with a delay (ex., 5 min) using the SLA?

I have ASA 5505 8.4. How to configure the switch to the backup channel to the primary with a delay (for example 5 min.) using the SLA monitor?
Or as something else to implement it?
My configuration for SLA monitor:
sla monitor 123
type echo protocol ipIcmpEcho IP_GATEWAY_MAIN interface outside_cifra
num-packets 3
timeout 3000
frequency 10
sla monitor schedule 123 life forever start-time now
track 1 rtr 123 reachability

Hey cadet alain,
thank you for your answer :-)
I have deleted all such attempts not working, so a packet-trace will be not very useful conent...
Here is the LogLine when i try to browse port 80 from outside (80.xxx.xxx.180:80) without VPN connection:
3
Nov 21 2011
18:29:56
77.xxx.xxx.99
59068
80.xxx.xxx.180
80
TCP access denied by ACL from 77.xxx.xxx.99/59068 to outside:80.xxx.xxx.180/80
The attached file is only the show running-config
Now i can with my AnyConnect Clients, too, but after connection is up, my vpnclients can't surf the web any longer because anyconnect serves as default route on 0.0.0.0 ... that's bad, too
Actually the AnyConnect and Nat/ACL Problem are my last two open Problems until i setup the second ASA on the right ;-)
Regards.
Chris

Hello. So I have used my iPod touch 4g for 2 years now and need to change the battery. My question is: will I lose everything I have on my iPod like my music,pictures and apps if I change the battery on my iPod touch 4g?

hello. So I have used my iPod touch 4g for 2 years now and need to change the battery. My question is: will I lose everything I have on my iPod like my music,pictures and apps if I change the battery on my iPod touch 4g?
Thanks for answer

If you go to Apple, they will not replace your battery, but exchange your iPod for a refurbished iPod of the same model with a new battery. Therefore you will lose everything that is not backed up. If you change it yourself or have a third party change it, you will most likely not lose anything (but still best to make a backup as lllaass suggested).

Need to "move" the Help|Personalize|Logoff links below masthead

I need to move the links Help/Personalize/Logoff from the masthead to below the masthead. This is what I did:
1. hid the links in the masthead by using the "Show..." properties of the masthead iView
2. created a new iview with the links Help/Persoanlize/Logoff and add it to the framework page under the masthead. This iView is based on the masthead iView source code where I removed the banner and welcome areas.
But when I did that, the logoff functionality stopped working. Do you have any other ideas on how to achieve this without impacting the logoff functionality?
Thanks in advance,
Tiberiu

Hi Tiberiu,
Change the masthed par file for this. It is a simple process deploy the par in to NWDS and change th .jsp file which is structured in HTML table format.
<table>
     <tr>
            <td> </td>
            <td> </td>
     </tr>
<table>
here everything is shown in single row.
just make a new row <tr> </tr>
cut the code responsible for logoff/personalize and paste it in the new row.
(Simply, change it as u like)
deploy it in portal and create and iview for it add it to the Default FrameWork Page at top and make the old masthead disable/remove it.
Try it,
MrChowdary.

ASA 5505 Failure replaced and need to move the license key?

Similar Messages

Maybe you are looking for