ASA 5505 Keeps rebooting after trying to load image in ROMMON mode

Hi,
I erased my image to upgrade but my ASA was shut down half way though, so I found myself in ROMMON mode.
I was able to upgrade my image once in rommon mode but I found I had an incorrect version so I went through the whole process again. Since trying to load a new image I have been constanly receiving the 'Use Break or Esc to interrupt boot. Use SPACE to begin boot immediatly'.
I can connect to my TFTP server and load the image but it always reboots, or if I select ESC it just goes back to ROMMON mode.
Any thoughts??

I had to do 2 things, one replace memory and the second is set VLAN=untagged, then I could ping the server and tftpdnld would work.

Similar Messages

Re: Need Help! Dell poweredge T630 cannot reboot after trying to add new memory

It fail to initialize the iDRAC

hi, can any one please advise what should I do for my server? Dell poweredge T630 cannot reboot after trying to add new memory card. Even I remove the newly added memory card and only keep the original one there, it still cannot reboot. Before I try to add the memory card, it works well without any rebooting issues.
Thank you so much for help
steven
This topic first appeared in the Spiceworks Community

Need Help! Dell poweredge T630 cannot reboot after trying to add new memory card

What errors are you seeing on the screen?

hi, can any one please advise what should I do for my server? Dell poweredge T630 cannot reboot after trying to add new memory card. Even I remove the newly added memory card and only keep the original one there, it still cannot reboot. Before I try to add the memory card, it works well without any rebooting issues.
Thank you so much for help
steven
This topic first appeared in the Spiceworks Community

I attempted to import pics from iphoto to a folder on my desktop but somehow clicked desktop so 45,000 pics loaded, now computer freezes after trying to load everything. possible to reverse this? options? restore hd from time machine? pls help!!!

long story short...i attempted to import pics from iphoto to a folder on my desktop but somehow clicked desktop so 45,000 pics loaded to my desktop and now my computer freezes up after trying to load everything, and i'm not able to just drag the photos into the folder. is it possible to reverse this? what are my options? restore hd from time machine?
a further question to restoring my hd from a previous backup on time machine...it says it will erase the hd. does it actually erase everything or does it just erase anything that may have been added or downloaded since that backup? this is confusing to me.
another problem which is part of the original problem is it seems that when i connect my iphone to my computer and iphoto uploads my pics...it doesn't just upload new ones, it duplicates and uploads every picture again...which is why i have 45,000 pics...they are 40,000 duplicates! what's up with that?
I have a macbook pro, and recently updated the os to Yosemite. the iphoto app is out of date, but i'll worry about that once i can figure out how to get all those pics off the desktop. also, i recently purchased and installed 8g of new ram, but that hasn't seemed to help.
any advice would be appreciated!
thanks!!

thanks for replying.
the booting and walking away and then attempting to browse and clean method is what i've been trying to do. it won't let me drag and drop and just freezes up and goes to sleep after 2 minutes. it's a never ending battle with very few results. which is why i questioned the method of just restoring the hd from a time machine backup.
do you think restoring the hd from time machine will resolve the issue with all pics on the desktop? and everything will be as it was from the date i restore it from? sorry, as you can tell, i'm not overly computer savvy.
i have a really old desktop mac...i can try connecting the two...how does one boot a mac in 'target mode'?
as for the iphoto cleaning and organizing issue...that is what i was trying to accomplish with importing them to a folder. was going to browse and clean from there...but somehow imported to desktop which is what's complicating everything. once i get them off the desktop i can work on the iphoto issue...which as i mentioned...i didn't take 45,000 pics...i've just taken about 4,500 over the last few years, and they are being duplicated in iphoto. this was my attempt to clean it out entirely and start over. it will basically be a lot of deleting.
one problem, seems to lead me to more...which is just my luck. :-)
thanks again, for your help.

App store keeps crashing after trying to update to latest 10.8.3, what can I do I can not reinstall it from anywhere!

App store keeps crashing after trying to update to latest 10.8.3 update ,
what can I do I can not reinstall it from anywhere! Everything runs so slow!
It is reaally frsutrating trying to find the app store in apple's site can anyone pinpoint to where can I download it again and try to get to work?
Thanks

Try the Combo update from the Apple Support page - http://support.apple.com/kb/DL1640.
Good luck,
Clinton

Iphone keeps rebooting after slide to power down?

Help! My 4S iphone keeps rebooting after slide to power down?

iPhone 4s.
iOS 5.1.1
When USP charging cable is connected to both the live wall charger and iphone,
the iPhone will succesfully 'Slide to Power Off'.
When the USB cable is not connected the following:
1. Hold down power button until "Slide to power off appears".
2. Slide the slider.
3. Iphone gets the spinny wheel.
4. Screen goes dark for a second.
5. Apple logo then appears and the iphone eventually turns back on.
6. No Apps are installed on this 4S.
7. Restored on iTunes several times, No change.
8. Changed USB Cable, No change.
9. Cleaned Connector port w/ brand new, Clean, soft tootbrush, No change.
10. Blown clean air into the connetor, No change.
Any New developments / suggestions?????????????

HT202157 My Apple TV keeps rebooting after it did the up date

My Apple TV keeps rebooting after the new roads were down down

The update didn't apply correctly, you will need to restore
Restore your Apple TV (2nd and 3rd generation) - Apple Support

Iphone 4 error -1 after trying to update, stuck in recovery mode

Iphone 4 error -1 after trying to update, stuck in recovery mode, cant get out. tried dfu mode, plugged into computer wont restore

From Apple Support Doc.
Error -1
Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
Looks like a hardware failure. Appointment at the Genius bar for evaluation and possible replacement.

Desktop/Finder keeps rebooting after upgraded to Maverick (mac mini hooked up to a home theater system)

My desktop keeps rebooting ever since I upgraded to Mavericks.
Current setup, Mac Mini hooked up to home theater (Panasonic SC-HTB20) that is then hooked up to my Panasonic Plasma TV.
I usually leave my Mac Mini on running and at least once a day when I turn on the TV I can see that my desktop was rebooted. Firefox and Chrome will say that it wasn't shut down properly and if I want to restore my previous session. Also some times when I switched the input to watch TV and switch back, all my windows will be scattered out of place. For example Chrome will be in the top left hand corner to the point that it's almost minimized and I wouldn't be able to move it as well. Only thing I can do is close out these applications and relaunch them. It doesn't appear that the OS actually crashed, but more like the desktop/finder itself crashed. Cause once in a while I will switch back or turn on the TV and the screen will stay black for a few minutes then I'll see the cursor in the top right hand corner. After that I will start to see the desktop and my application start loading. It doesn't go through the regular process of rebooting where you see the Apple logo so I don't think the OS actually crashed but I could be wrong.
For some reason it seems like Maverick doesn't like the home theater system. An almost guarantee way to reproduce the issue is to wait for the home theater to turn off after it's been inactive for a while. If I turn it on the home theater to have the audio coming from it I will see the desktop goes black immediately then the whole desktop reboot process I mentioned above will kick in.
Never had any of these issues on 10.7 before I upgraded to Maverick.
Anybody have any suggestion? I really don't want to format and downgrade back to 10.7.
Thanks

Sounds like a kernel panic.
If you post the report we could have a go at deciphering it.
It would be in /Library/Logs/Diagnostic Reports.

Please help:System keeps rebooting after Bios flash update

Hello,
Ok for starters I have the K9A2 CF motherboard,4GB of ram,My last Bios was 1.8.
I was flashing to 1.9 using the bios flash tool and a usb 1GB stick.The Bios flash went without errors and I rebooted.After this I booted back up.It gets to the 512Mb on the screen then poof,the system reboots automatically and keeps doing so thereafter unless I shut the PC off.How can I restore my Bios or fix this issue.This is not good as I cant even get to the post screen before it reboots to change anything.
Thanks,
K9A2 CF board
Windows Vista 64
4GB Corsair ram
80GB Stata HD
200GB IDE HD
DVD-RW Drive

Quote from: soldat32 on 06-August-09, 05:16:16
CPU Type QuadCore AMD Phenom, 2500 MHz (12.5 x 200)AMD Phenom X4 9850 Quad Core Processor HD985ZXAGHBOX - Black Edition, Unlocked 2.50GHz, 4MB Cache, 2000MHz (4000 MT/s) FSB, Agena, Quad-Core, Retail, Socket AM2+, Processor with Fan
No errors were found in my memory.My PSU seems to be working fine.My VGA is a XFX Nvidia 9600GT with 512mb.
Have you tried that?:
Quote from: Svet on 06-August-09, 03:52:32
Try with your second stick alone in the same DIMM slot.
Quote from: soldat32 on 06-August-09, 05:16:16
CPU Type QuadCore AMD Phenom, 2500 MHz (12.5 x 200)AMD Phenom X4 9850 Quad Core Processor HD985ZXAGHBOX - Black Edition, Unlocked 2.50GHz, 4MB Cache, 2000MHz (4000 MT/s) FSB, Agena, Quad-Core, Retail, Socket AM2+, Processor with Fan
Its 125W CPU.
Can you shows picture of your board? Is it V2? Is there a heatsink over mosfets?:

HD DRV Keeps Rebooting after adding audio receiver

I have had FIOS tv for almost 2 years now with no issues, I am in Edgewater, MD. I recently bought a new receiver, Onkyo TX-SR606 receiver. After hooking everything up through the receiver with HDMI cables, my DVR box keeps rebooting. It only happens when I run the HDMI to the receiver then to the TV. If I run the HDMI directly to the tv, like it has been for over a year, I don't have any problems. I know I could work around this by just running the audio to the receiver, but I wanted to take advantage of the HDMI cable and control all sources through the receiver. Has anyone else had this kind of issue?

Your problem comes from the looseness of the HDMI protocol. The protocol allows for to much variance in the implementation and because of that a digital "handshake" issues occur. The more HDMI components you add to the mix the more likely you are to have issues. I get the DUI message at every start up and I have HD DVR straight to the TV, however I don't experiance any other audio or visoe issues. Just the meassage as everything intializes.
"If your problem has been solved, please mark it as such. Don't forget to hand out your Kudos!"

HT4623 my iphone 4 needs rebooting after trying to update through air, but i dont have access to itunes. Is there any manual way to do this?

my iphone 4 stop working after trying toupdate, how can i reboot without itunes?

If you mean it's in recovery mode, no. There is no way around it. It must be restored using a computer running iTunes.

Error 2330 after trying to load 8.1 with other message prior to that.

Help, I have tried all the messages I have read! I unistalled Itunes, uninstalled Quicktime, tried to load earlier version 8.0 to no avail (even 7.0)!
My system will go in a circle and will constantly try to load 8.1 even after I say cancel. If I didn't love my Ipod I would post nasty messages about Apple software!
The good news is if I connect my Ipod it appears to open Itunes (I can only assume the Itunes is from my Ipod) It will sync then close Itunes, I cannot stop any activity.
How can I start over with an evenealier Version? I did try but I get this error message just before Error 2330 that States "unable to create ......\mobile device\bin or something like that. When I look at files I see or should say , saw that directory now It would appear nothing works.
Do I have to wait for 8.5 until this is fixed? I run windows XP, and tried both versions 64bit and the xp. I miss my Itunes and my 16gig of music.

Ok IT IS NOW FIXED.
Here is what worked for me.
I think since I kept having a message "....\bin" I deceided to rename the primary folder C:\programs\common\apple\mobile device support. (xxxMobile device supportxxx).
I removed all programs ( Itunes updater, Quicktime, safari) using windows add / remove programs. I then emptied recycle bin. I shut off my Dell ,then turned back on.
I then installed the 32 bit XP version, and it is now working.

IPhone 4 keeps rebooting after multiple restores

When it first started, it was jailbroken and I had turned off all data while in Canada. When I crossed back into the US I made a call and it started rebooting every minute or so until the battery got too low. I have restored it multiple times without jailbraking but it just keeps rebooting.
First it would not charge past 3% then it charged for a bit but now it is back stuck at 3%. I am thinking but I am not sure if it is a battery issue. Anyway to verify this? Also should it charge when off, or in one of the restore modes?

I even have the same problem. After searching the web for long what i now know is that Apple knows this problem. I have even read in some posts that apple replaced the iphones for couple of people. There are even videos on you tube about the same issue we are suffering with. But the bad part is that despite apple knowing this issue they are not addressing or even replying to individuals like me and you for the way forward. I this case you are lucky that you stay in USA and could be having Apple store just next to you but i am in a real mess here in Kenya. As i will have to travel 400km to have the phone repaired or replace the phone.

Ios7 updated, phone keeps rebooting after a logo

Iphone 4 (AT&T) updated with IOS7 and phone initially had issues activating but once activated, it just keeps rebooting....as soon as the logo pops up, goes down again and comes back with logo and keeps doing since last night. Tried to connect to itunes but as it is not staying up till itunes recognizes it. Tried DFU mode but won't stay that long either.
it worked perfectly prior to that and updated all IOS updates till now and no issues.
need help.

Sorry to hear that you lost all your data
When you update directly from the phone only the changes from the previous version are downloaded and the download is therefor smaller then the one you get in SUS or PCC which downloads the entire firmware.
I also get some pop/clipping sound when making a call while listening to music so this is not a problem with your phone. I can forward this as feedback.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

ASA 5505 Keeps rebooting after trying to load image in ROMMON mode

Similar Messages

Maybe you are looking for