ASA 5505 Problem with outbound PPTP-connection on non-native vlan
Hi, why am I not being able to make a PPTP connection on vlan80 (trunked to AP Cisco 1142N) compared to vlan10? And yes, I've configured the "
inspect pptp"
ASA 5505 with sec plus license
Hi mate,
I don't know how to solve your problem but I strongly reccommend you to remove your password from the first post and to update it on your ASA device
Similar Messages
-
Cisco ASA 5505 - problem with negotiating IP address from PPPoE
Hi all,
I have problem with negotiating IP address from PPPoE. There is following design: ISP providing vDSL ending on VDSL modem in bridge mode. Behind brigde modem is ASA 5505 terminting PPPoE on OUTSIDE. Everything works fine except negotiating IP address from PPPoE server.
I have configured ASA 5505 with (ASA Version 9.2(2)4) for PPPoE like this [1.]. But If i try to "show" IP address on OUTSIDE interface a get this [2.], ok strange but let's continue. If list "show vpdn pppinterface id 1" i get this [3.]. Seems that I got public IP addres what was right, but this IP address was not associated with interface OUTSIDE?
Well, if I set IP address manually like this [4.] and also set a default route everything works fine but what will happen when ISP change reservation for my IP address or default gateway.
I have tried different version of ASA OS like 8.4, 9.1 but without luck.
Can anybody help me. Thanks a lot.
Regards
Karel
[1.]
interface Vlan100
description >>VLAN pro pripojeni do internetu<<
nameif OUTSIDE
security-level 0
pppoe client vpdn group O2
ip address pppoe setroute
vpdn group O2 request dialout pppoe
vpdn group O2 localname O2
vpdn group O2 ppp authentication chap
vpdn username O2 password *****
interface Ethernet0/0
description >>uplink O2 vDSL<<
switchport access vlan 100
[2.]
ciscoasa(config-if)# show ip address vlan 100 pppoe
ciscoasa(config-if)# 0.0.0.0 255.255.255.255 on Interface: OUTSIDE
ciscoasa(config-if)# show interface vlan 100 detail
Interface Vlan2 "OUTSIDE", is up, line protocol is up
Hardware is EtherSVI, BW 100 Mbps, DLY 100 usec
Description: >>VLAN pro pripojeni do internetu<<
MAC address f44e.05d0.6c17, MTU 1492
IP address unassigned
Traffic Statistics for "OUTSIDE":
28 packets input, 1307 bytes
31 packets output, 721 bytes
0 packets dropped
1 minute input rate 0 pkts/sec, 3 bytes/sec
1 minute output rate 0 pkts/sec, 1 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Control Point Interface States:
Interface number is 15
Interface config status is active
Interface state is active
[3.]
ciscoasa(config-if)# show vpdn pppinterface id 1
PPP virtual interface id = 1
PPP authentication protocol is CHAP
Server ip address is 88.103.200.41
Our ip address is 85.71.188.158
Transmitted Pkts: 20, Received Pkts: 16, Error Pkts: 0
MPPE key strength is None
MPPE_Encrypt_Pkts: 0, MPPE_Encrypt_Bytes: 0
MPPE_Decrypt_Pkts: 0, MPPE_Decrypt_Bytes: 0
Rcvd_Out_Of_Seq_MPPE_Pkts: 0
ciscoasa(config-if)# show vpdn session state
%No active L2TP tunnels
%No active PPTP tunnels
PPPoE Session Information (Total tunnels=1 sessions=1)
SessID TunID Intf State Last Chg
22298 2 OUTSIDE SESSION_UP 561 secs
[4.]
interface Vlan100
description >>VLAN pro pripojeni do internetu<<
nameif OUTSIDE
security-level 0
pppoe client vpdn group O2
ip address 85.71.188.158 255.255.255.255 pppoe setroute
route OUTSIDE 0.0.0.0 0.0.0.0 88.103.200.41 1You're right that the ACL should not affect otherwise allowed communications to the interface address.
Try disabling the ip audit feature on your outside interface.
no ip audit interface OUTSIDE AP_OUTSIDE_INFO
no ip audit interface OUTSIDE AP_OUTSIDE_ATTACK -
Cisco ASA 5505 - problem with ssh, icmp on OUTSIDE interface
Hi all,
I have a very strange problem with OUTSIDE interface and remote ssh. Well, I have followed documentation and configure remote access for ssh like this [1.]. If I want to connect from internet to OUTSIDE interface [2.] get no response and in log I can see this message [3.]. I really do not understand why is ssh connection dropped by OUTSIDE access-list [4.]? If I understand documentation correctly there is no impact for remote mangement/access like icmp, ssh, http(s) by interface access-list. So, why?
When I try ssh connection form internal network to INSIDE interface everything works fine and I can log in to ASA. If I try allow ssh in OUTSIDE access-list still no success and a get this message [5.]? It is strange, isn't?
The same problem with icmp if I want to "ping" OUTSIDE interface from internet a get thish message in log [6.] and configuration for ICMP like this [7.].
Full ASA config is in attachment.
Can anybody help how to fix it and explain what is exactly wrong.Thanks.
Regards,
Karel
[1.]
ssh stricthostkeycheck
ssh 10.0.0.0 255.255.255.0 INSIDE
ssh 0.0.0.0 0.0.0.0 OUTSIDE
ssh timeout 60
ssh version 2
ssh key-exchange group dh-group1-sha1
ASA-FW01# show ssh
Timeout: 60 minutes
Version allowed: 2
10.0.0.0 255.255.255.0 INSIDE
0.0.0.0 0.0.0.0 OUTSIDE
[2.]
ASA-FW01# show nameif
Interface Name Security
Vlan10 INSIDE 100
Vlan20 EXT-VLAN20 0
Vlan30 EXT-WIFI-VLAN30 10
Vlan100 OUTSIDE 0
ASA-FW01# show ip
System IP Addresses:
Interface Name IP address Subnet mask Method
Vlan10 INSIDE 10.0.0.1 255.255.255.0 CONFIG
Vlan20 EXT-VLAN20 10.0.1.1 255.255.255.0 CONFIG
Vlan30 EXT-WIFI-VLAN30 10.0.2.1 255.255.255.0 CONFIG
Vlan100 OUTSIDE 85.71.188.158 255.255.255.255 CONFIG
Current IP Addresses:
Interface Name IP address Subnet mask Method
Vlan10 INSIDE 10.0.0.1 255.255.255.0 CONFIG
Vlan20 EXT-VLAN20 10.0.1.1 255.255.255.0 CONFIG
Vlan30 EXT-WIFI-VLAN30 10.0.2.1 255.255.255.0 CONFIG
Vlan100 OUTSIDE 85.71.188.158 255.255.255.255 CONFIG
ASA-FW01# show interface OUTSIDE detail
Interface Vlan100 "OUTSIDE", is up, line protocol is up
Hardware is EtherSVI, BW 100 Mbps, DLY 100 usec
Description: >>VLAN pro pripojeni do internetu<<
MAC address f44e.05d0.6c17, MTU 1480
IP address 85.71.188.158, subnet mask 255.255.255.255
Traffic Statistics for "OUTSIDE":
90008 packets input, 10328084 bytes
60609 packets output, 13240078 bytes
1213 packets dropped
1 minute input rate 15 pkts/sec, 994 bytes/sec
[3.]
Jan 13 2015 06:45:30 ASA-FW01 : %ASA-6-106100: access-list OUTSIDE denied tcp OUTSIDE/193.86.236.70(46085) -> OUTSIDE/85.71.188.158(22) hit-cnt 1 first hit [0xb74026ad, 0x0]
[4.]
access-list OUTSIDE remark =======================================================================================
access-list OUTSIDE extended permit icmp any any echo-reply
access-list OUTSIDE extended deny ip any any log
access-group OUTSIDE in interface OUTSIDE
[5.]
Jan 12 2015 23:00:46 ASA-FW01 : %ASA-2-106016: Deny IP spoof from (193.86.236.70) to 85.71.188.158 on interface OUTSIDE
[6.]
Jan 13 2015 06:51:16 ASA-FW01 : %ASA-4-400014: IDS:2004 ICMP echo request from 193.86.236.70 to 85.71.188.158 on interface OUTSIDE
[7.]
icmp unreachable rate-limit 1 burst-size 1
icmp permit 10.0.0.0 255.0.0.0 INSIDE
icmp permit 10.0.0.0 255.0.0.0 EXT-WIFI-VLAN30
icmp permit any OUTSIDEYou're right that the ACL should not affect otherwise allowed communications to the interface address.
Try disabling the ip audit feature on your outside interface.
no ip audit interface OUTSIDE AP_OUTSIDE_INFO
no ip audit interface OUTSIDE AP_OUTSIDE_ATTACK -
Problems with n97 apps connecting to network (Voda...
Problems with n97 apps connecting to network (Vodafone UK – 3G)
Recently a number of my apps which used to connect automatically to the internet (which ever was available – known wi-fi or 3g) have stopped doing this. They now only connect to one known wi-fi.
I’ve tried uninstalling and reinstalling each app, but this hasn’t solved the problem. I’ve checked for software updates and do not believe any have been applied or are available. All apps have been downloaded via Ovi on the phone. I still am able to access the internet by the web browser which was installed on the phone and via google maps (which also still manages GPS position, search, etc).
The apps which I notice causing a problem are:
Sainsbury’s/nectar
Tesco
Map my tracks
Snaptu
Opera Mini
Any one got any ideas???I have the same problem since i updated my mac to 10.5.6.
Each time I have to do a diagnostic and retype the WEP password to have the internet connection. -
Does anyone else have problems with the wifi connection on their 4th generation Mine keeps going off line and its only 3 weeks old.I had the ipad mini and this problem never existed. I brought it back to the shop where i bought it Expert Laois last week and they said they couldnt find a problem but had to take it back today as it keeps disconneting from wifi still, anyway they are sending it back for repair and it am left with no ipad. After spending in excess of 700e i feel that this is really bad after sales service. I bought something that i want to use now and cant so what a waste of money it is .
Thankyou, but the shop said that they spoken to apple and that they have now changed their policy and that they do not give a replacement. So are you telling me that their information is false. Also what should they have done. This problem has existed since i bought it.????? What should i do?????
-
Both xp and windows 7 have video problems with my VGA connection using TV
both xp and windows 7 have video problems with my VGA connection using TV as my monitor when it gets to starting up windows no matter what version it will not I have let my mac on all night and still says starting windows or the windows 7 logo and nothing else will happen also when I use a 3rd patty software like peraills or other it works like a charm how to fix it?
To map the drive on your computer click on Start - RUN - type "\\192.168.1.1" and click ok... When prompted for Username and Password type "admin" and click ok... Now you will be able to see the folder which you have shared on your router, right click on it and select "Map network drive" and click on finish.
Now it will map the drive on your computer and you should be able to transfer the file from your computer to the USB drive. -
Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?
Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
You are likely to get poor connections and dropping out.
If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
http://forumhelp.dyndns.info/networking/powerline3.jpg
I will monitor the subject line of this thread, should you want to post any more information.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
Language problem with my jdbc connection
Hello,
i'm having a problem with my jdbc connection.
the problem is that i'm connecting to MS- Access db the have arabic tables, and columns, it was working fine on a windows XP environment prepared for arabic language, but when i had to move to windows vista it did not work and it gave me an exception.
i'm using netbeans 6.1 IDE, and the exception is
java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver]COUNT field incorrect
at sun.jdbc.odbc.JdbcOdbc.createSQLException(JdbcOdbc.java:6957)
at sun.jdbc.odbc.JdbcOdbc.standardError(JdbcOdbc.java:7114)
at sun.jdbc.odbc.JdbcOdbc.SQLExecDirect(JdbcOdbc.java:3110)
at sun.jdbc.odbc.JdbcOdbcStatement.execute(JdbcOdbcStatement.java:338)
when i printed the select statement and the exception it gave me:
SELECT [??? ???????], [??? ??????], [??? ?????], [??? ?????], [????? ???????????] FROM EDU_DIVISION; [Microsoft][ODBC Microsoft Access Driver]COUNT field incorrect.
the question marks are very weird to appear!!!!!!
here is the code:
public void edu_branch() {
sucpy = 0;
eflag = 0;
asql = "SELECT [\u0643\u0648\u062F \u0627\u0644\u062C\u0627\u0645\u0639\u0629], [\u0643\u0648\u062F \u0627\u0644\u0643\u0644\u064A\u0629], [\u0643\u0648\u062F \u0627\u0644\u0642\u0633\u0645], [\u0643\u0648\u062F \u0627\u0644\u0634\u0639\u0628\u0629], [\u0627\u0633\u0645 \u0627\u0644\u0634\u0639\u0628\u0629], [\u0627\u0633\u0645 \u0627\u0644\u0634\u0639\u0628\u0629 \u0628\u0627\u0644\u0627\u0646\u062C\u0644\u064A\u0632\u064A\u0629], [\u0627\u0644\u0643\u0648\u062F \u0627\u0644\u0645\u062E\u062A\u0635\u0631] FROM EDU_BRANCH;";
Connection connection;
Statement statement;
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
connection = DriverManager.getConnection("jdbc:odbc:info");
System.out.println("Connection to Access file is created...");
statement = connection.createStatement();
statement.execute(asql);
System.out.println("Executing query : " + asql);
aset = statement.getResultSet();
if (aset != null) {
//------------------------------Oracle operations--------------------------------------------------------------------
while (aset.next()) {
can you help me pleasearabic language
SELECT [??? ???????], [??? ??????], [??? ?????], [??? ?????], [????? ???????????] FROM EDU_DIVISION; >[Microsoft][ODBC Microsoft Access Driver]COUNT field incorrect.
the question marks are very weird to appear!!!!!!It failed to understand your unicode sql.
it was working fine on a windows XP environment prepared for arabic language, but when i had to move to windows vista it did not workStrange. Maybe you need to compare the differences of some system properties on both hosts, for instance, sun.io.unicode.encoding, file.encoding, user.region, and so on. -
Has Apple fixed the problem with 4G cellular connection?
Has Apple fixed the problem with 4G cellular connection on the iPad 3?
Cellular connection problem was for US connection in Houston, Texas. Have an iPad 2 which functions perfectely on Wi-Fi or 3G. Bought an iPad 3 strictly to get the increased speed from the 4G LTE connection. Purchased on with the AT &T cellular. Wi-Fi functions fine, but 4G LTE connection is terrible when it connects at all. Went to AT&T and they said no problems with service in my area, but never get over 2 bars and most times, Web pages load very slow or will hang and not load at all. Went to the Apple store and they said it was AT&T network problem and went to AT&T and they said no problems with their service. Went to the Apple communities forum here and discovered that many people were having the same problems with the 4G LTE cellular connection on their iPad 3's. Didn't seem to matter if it was AT&T or Verizon. So I decided that I would just return the unit and wait for Apple to fix the problem. Hence my question.
Appreciate very much your time in responding to my question. -
Organizer elements 11. Problem with your internet connection
I am trying to access facebook and Flickr via the Organizer with elements 11. I went to preferences and cleared the oline services, when I try to refresh the partner services I am greeted with the error " there is a problem with your internet connection, check your firewall settings" .
Windows 8, updated. I tried disabling the firewall. I have also tried making sure permissions are set up to allow all adobe products access through the frewall when it is enabled. No other network managment services or virus scanners installed. just default 64bit windows 8.
I am currently left with no partner services; facebook, flicker, picasa, etc.... I could reinstall organizer i guess to get the default services back...
I found discussions on the web but none with a solution. http://forums.adobe.com/message/4035670
Any help would be greatI apologize for the delay. An update was released shortly after I posted the question that resolved the issue. Thank you for your assistance though. As soon as I read your advice I went to my laptop to follow your instructions. Upon opening photoshop I was prompted with an adobe update message. After the update the issue was resolved. Again, sorry for not updating the situation.
-
I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?
After +/- 10 to 15min my connection is gone.
Does anyone have a sollution?Lots of people are having the same problem, you're not the only one, belieeeeve me.
Just Googling the problem gets you tons of people complaining about the same thing, SOMETHING is up with Lion what wasn't happening with Snow Leopard. i just bought a new Imac and it CAME with Lion, so i started experiencing this internet dropout immediately.
It's been going on for the most of a year it looks like (at least by the dates from the threads i've been reading)
So your best bet is to fiddle with the System Preferences and read what other people have used to make theirs work. i'm doing that myself right now. I already posted a similar thread last night trying to figure out why my connection kept on dropping, i got a reply which linked me to a site. i followed the instructions there, so far so good, but i'm just being cautiously optimistic.
i'm gonna call Apple today and see if they've found anything, though seeing as this is a problem right out of the box there may not be an immediate solution. Good luck hunting for a solution :3
Site:
http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook -
I have iPhone 4. After I upgraded to ios5 I have a problem with Wi-Fi connection with "WPA enterprize" protection. I can define the connection and everything works fine. But after I lose signal or shutoff the WiFi, I cannot re-connect, and need re-define the net. It is only in WPA enterprize.
Thanks,
EyalI tried this! Somebody suggested it in another thread. It did not work, sadly.
-
I have an iPad MD371Y. Since when I installed the iOS 6 I'm fading problem with the WiFi connection. The line fall everytime the device go on automatic stand by (if i do not touch it for 5 min). Can somebody be of Help?
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
hello
I have an Iphone 3, but I had a problem with the wifi connection when I want to connect the wifi icon is gray and I can choose to access the wifiRead here:
http://support.apple.com/kb/ts1559
If nothing works, you most likely have a hardware issue. -
Strange problem with the internet connection
Hello,
I've a strange problem with the network connection , I have bought a Iphone 3g in Italy in date 31st
October 2010. Now in Italy I have just subscribed a telephone rental with Wind company, where there is an unlimited internet service. The problem is that in my Iphone there is not the line.
All this is strange because I receive the messages from social networks (like facebook and msn) but I cannot open tha page for the internet connection. I have gone to Apple store and I have tried to put my SIM in an other phone (iphone 3g or 3gs): my SIM is perfectly working.
The problem is only for the internet connection on my phone because wifi connection is good.
Thanks!!Please help everyone who has the same problem by posting yr solution, thx!
Maybe you are looking for
-
How can my users unpause a printer without admin login?
Everytime a printer goes into a paused state it requires me to login as the admin for the que to unpause the printer. Any ideas?
-
One day, my ipad and iphone pick up my emails (.mac account) from icloud just fine. the next day, I recieved error messages that say my user name and password are not accurate. I removed the icloud program on both devices and added it back on to both
-
Exception while testing proxy service in Oracle Service Bus
Hi I have created a cartridge in the Financial Message Designer with a Universal External message format and a XML External message format and also included the mappings in the same cartridge.A proxy service in Oracle Service Bus10Rg3 is configured t
-
How to add row in presentation by using add button in Oracle BPM 10G
Hi, I have one presentation, in that i used some attributes as group. After launching workspace when click on+ sign iam getting new row, but instead of using that I want to use addrow button to get new row and same for remove row. please help me in c
-
Hey all I've been using arch for a file server for the past couple of months. I'd like to add a vnc server to it for a home away from home kind of thing. When I was testing X11 to see if it worked correctly, I received a number of errors: (EE)